Question about HP 2311xi - auto-switch source and delay wakeup from sleep

I recently purchased this monitor and noticed that when it wakes from sleep it will take about 5-10 seconds for it to wake whereas other monitors I've owned they have gone on immediately. I was just wondering if this is how this monitor is or if I have an issue with it.
Secondly, how is the auto-switch source suppose to work? I have my PC set to DVI and I have the default source set to my 360 through the HDMI connection. I would assume that when the 360 goes on it would go to the default source and switch over to the hdmi connection. However, my monitor does nothing. What does the auto-switch source actually do or is mine just defective?
Thanks in advance for any help on this monitor.
This question was solved.
View Solution.

Auto-switch source only works if there is no signal as it detects the port with a signal and auto switches to that port. However, the monitor has no way of knowing exactly which port the user wants when two signals are present.
Default port setting is what the monitor will look for first when being turned on and doesn't necessarily give that port override capabilities.
Taking 5-10 seconds can be normal. My third-party monitor at home generally takes about 5 seconds before displaying a signal, but this may have more to do with the HDMI connection (I haven't tested this with the VGA port). I don't believe this is a cause for concern.
Let me know if I answered your questions.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

TS2446 I forgot the security question about what was my first car and what is my favorite car! What is the solution to change that? please help me, thank you in advance Leo

I forgot the security question about what was my first car and what is my favorite car! What is the solution to change that? please help me, thank you in advance Leo

If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Questions' or 'iTunes Store account security' (it appears to vary by country) and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox)

My iPhone 3G auto switch off and I could nt turn on. Hw should I knw what is the problem

My iPhone 3G auto switch off and I could not turn on it no matter hw I try. Can anyone advise me thank q

did you try resetting in i tunes?
connect the iphone with itunes and try to reset it to work seting,s afterwards you can sync your datas...

HT4972 Good afternoon! I addressed in the AT&T company with a question about untying of a sim card of AT&T from my iPhone, all of them made Iphone now is unlocked, I executed all points which were written: To complete the unlock, simply 1 . Open iTunes o

Good afternoon! I addressed in the AT&T company with a question about untying of a sim card of AT&T from my iPhone, all of them made Iphone now is unlocked, I executed all points which were written:
To complete the unlock, simply
1 . Open iTunes on your Mac or PC and verify that you have Internet connectivity.
2 . Ensure a SIM card is inserted into your iPhone.
3 . Connect your iPhone using the dock connector to USB cable that came with your iPhone.
4 . Backup and restore your iPhone using iTunes. For information on backup and restore, please visit http://support.apple.com/kb/HT1414.
5 . After restoring, your iPhone will be unlocked.
Additional information on unlocking can be found at http://support.apple.com/kb/TS3198
I made everything as well as was written, but on completion of the ios 6.1.3 installation the iPhone asks to be activated through wifi or through a wire to the computer.
I connected Iphone to the computer and the text takes off: (Were sorry, we are unable to continue with your activation at this time. Please TR again later, or contact customer care! )
how to me to activate my iPhone?
I hope for your help....

Hey APPLELovestory,
We have an article that goes over troubleshooting iPhone activation issues here:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
Hope that helps,
David

Whast About All Audio Software Apps, Plugins And VI's From OS X Mountain Lion In Mavericks ?

Whast About All Audio Software Apps, Plugins And VI's From OS X Mountain Lion In Mavericks ?

Check here...
http://roaringapps.com/apps:table

Questions about the future directions of InfoPath and Microsoft Access

Because I have been confused about the future directions of InfoPath and Access, I wrote a short blog post, which I have pasted below. My question is, can Microsoft provide some more guidance on Access vs InfoPath? If Access is indeed the
the future direction, can you please provide some pointers to resources that can help us transition.
A Short Review of MS Access, SharePoint ,InfoPath (2013)
After the November 2012 SharePoint Conference in Las Vegas (#spc12) there were a number of blog posts and people saying that Access 2013 was great and would be replacing InfoPath.
Marc Anderson and
Ruven
Gotz have short posts summarizing #SPC12 and touch on the subject of InfoPath and Access. I also spoke with several individuals shortly after #SPC12 and they were excited about Access 2013.
Since I rely heavily on InfoPath for much of what I do, I wanted to kick the tires and see what everyone was talking about. First, a few notes about SharePoint 2013 and Office 2013.
Microsoft should rename Access: If you have tried to
bing the word Access, then you know that the search results are overwhelming, because the word "access" is used for so many other purposes.
Use the RTM version of Office 2013! I was performing my investigations by leveraging the Office 365 Beta and the Office Applications that come with it. Not much was working! After I uninstalled the Beta
version of Office 2013 and Installed the RTM version everything seemed to work.
Windows 7 and IE 9.0: The drag & drop that is being touted as
"manna from heaven" seems to work well with Firefox, Safari, Chrome, and IE 10, but it does
not work with IE 9!
Non Microsoft browsers are still second class citizens (except for the drag & drop): Microsoft has finally done away with the Active X's for datasheet view (that is brilliant!) One can now see the newly
minted datasheet view in many browsers. But I still find that one needs to be in IE to do a number of key manual opeartions. For example pasting numerous rows of data from a spreadsheet into the new sheet view works only in IE.
Access 2013
Microsoft Access is touted as a non developer tool. I know a number of people who are on the business side and love Access. These people will like the renewed energy that Microsoft has applied to Access. One should note that conceptually
this functionality existed in SharePoint 2010. Here is what I see that is new:
+The new version works better:Although I haven't tested it fully, it seems that many more features that work on the Desktop version of Access, now work in the published Web Application which is hosted by SharePoint 2013.
+The new version has fairly robust browser based forms: End users can now fill in data using forms that are rendered in the browser.
+The published version that resides in SharePoint now uses its own SQL server tables. So the engine appears to be SQL Server, not a modified version of Access built for a server. This stands to be quite robust, but I imagine
that some quirks will surface due to new model.
The limitations are:
- Access is pretty much its own application and does not integrate with SharePoint building blocks. For example, an Access table is not easy to integrate with a SharePoint workflow. Further, although Access forms now are visible
in a browser, they are not nearly as rich as InfoPath forms. InfoPath forms cannot easily integrate with the Access tables. In order to integrate SharePoint features and Access, one needs to tie SharePoint list(s) to Access as data sources.
This overcomplicates the model and one may very well run into synchronization issues.
In short, although I believe there will be some people who will be happy with newly minted Access, I do not think that Access will be able to replace InfoPath and Workflow technologies. I do agree that Microsoft does not seem to have put much energy into
InfoPath. If they leave a vacuum in this space, then others may very well take over, for instance Nintex Forms.

Although I agree with the comments made by Ruven and Marc after the conference please note that those blog posts are their own personal opinions and that they don't work for Microsoft. A lot of people have asked Microsoft to clarify the future of InfoPath
and the response up until now has been a deafening silence. In my opinion speculations about Access replacing InfoPath are premature.
I should also point out that most of your comments about Access 2013 above are actually about Access Services in SharePoint Server 2013. Access Services are NOT Access they are a shared service offering in SharePoint that convert and publish Access
databases and forms. As you point out once an Access database is published through Access services it is converted to SQL Server and no longer resides in Access. Of course I don't work for Microsoft either so these are all just my personal opinion.
Having said that I doubt you will get the confirmation/response that you are hoping for from any official Microsoft channel.
Paul Stork SharePoint Server
MVP Principal Solutions Architect: BlueChip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Question About Sharing Apps Between My iPhone and My Wife's iPhone

Hi, I have a question about downloading apps to my iPhone.
I ordered two iPhone 3g's - one for my wife and one for me, and I've discovered that when I download an app (even free ones) on my iPhone and then later sync it to iTunes, my wife cannot put it on her phone. However if I download it on iTunes on my computer and later sync it to my phone, then my wife is able to sync it to her phone as well. It's no big deal when they are free because she can just go get it if she wants it. I haven't purchased any apps yet, but is there a way to be able to give my wife apps that I purchase on my iPhone? Or do I need to purchase all of my [pay] apps and songs on iTunes on my computer to ensure we both have access? Or do I have it all wrong completely LOL?? This rights management stuff is confusing.
Thanks in advance for your help,
Jimmy

I had my iTunes account and phone before I got my wife's hers. When I first started, I synced hers from her account on my computer brought in my libraries and authorized her phone as one of the 5 allowed. She had all purchased apps and music. Over time we each bought music or apps on our seperate accouts. Of course, we told each other about cool apps or music we bought and wanted on our phone. When I went to sync iTunes was going to delete all music and apps and sync with the library I was logged into. Didn't want that, only work around I have found is to copy new music or new apps from one library to the other. Updating on the phone is also difficult because you can't switch between accounts so updates have to be done at the computer for apps bought under different accounts. I am sure there is a better way to do this and ask for an insight anyone would have. I hope it works out.
Message was edited by: AfoUare for typos

The Question about stock transfer between HU-Management and WM-Management

Hi,
There is a scenario about stock transfer between HU-Management and WM-Management storage location. I use transaction MB1B , movement type 313 , 315. After Good issue from WM-management storage location, outbound delivery will genarated, then Pack, Create/Confirm TO, at last post goods issue for the outboud delivery. But when i do movement type 315, there is a warning message "Data of preceding document was not transmitted", and from the F1 help i find this system reponse "You can maintain an indicator that makes information about preceding documents in this delivery available under delivery type in Customizing. For some characteristics of this indicator, the type of preceding document and the related document and item numbers must be transmitted to delivery creation. At least one of these parameters is missing.".
So, My questions are:
1. Generallily, Outbound delivery is created by SO, inbound delivery is created referenc PO, but how the stock transfer for 2 steps generate the outbould delivery and inbound delivery? Could you pls tell me the where i can config this in the IMG?
2. What's "Data of preceding document was not transmitted" mean ? how to fix this issue ?
Best Regards
Boxer Du
I am the SAP fans, focus on MM and WM. I am interesting TRM Yard Management and Cross Docking now.Very Gladly to talk you about these areas. I want to exchange the knowledge with you, and want to be a good friend of you. Pls contact me. You can find My MSN in the profile. Thanks.

Hi,
Sure, The inbound delivery type is set up in the IMG->Logistics General -> HU management -> Basics ->Delivery type -> Delivery type determination.
For Inbound delivery type 'HID' is maintained in this view.
Best Regards.
Some One want to discuss the details , can contact me. Thanks.

Questions about free Download Oracle 10g, Database and Developer suite

Hi everyone, got some questions..
1) Is it possible to download free Oracle 10g and Developer suite? is a 30 day license trial or something like that?
2) On windows systems which are the minimun requirements?, for example in a Pentium 4, 512Mb RAM, Windows XP Home edition is OK?
3) Should I download Standard Edition? Personal?
4) If I am trying to update my Oracle Developer knowledge (I was developer on 1999 with Oracle 7.3 and Developer 2000) what products do I have to install?? Oracle DB 10g, Developer Suite,Application Server too?, what else?
Thanks guys!
J.

My answer you could find here Questions about free download Oracle 10g, Developer Suite

Basic question about a level 2 switch when adding an IPv4 Address

Wow, you are all awesome!!!

I am studying for the Network Plus exam and I have a lab that is showing me how to run simple commands on a switch. In the lab, it has me go to the switch, enter enable mode, then configure the switch. It then has me enter an IP address and Subnet. What I would like to know is what is the IP address configured for? Is that the PC's IP address and Subnet? Sorry if the question is remedial, but I really would like to know what the switches IP and Subnet correspond to.
This topic first appeared in the Spiceworks Community

A Question about Windows games with boot camp and system requirements

I don't plan to play many games on my Mac, but after seeing what can be done with it, I've been entertaining the idea of picking up a Windows game or 2 to play in Boot Camp (considering picking up a XP PRO with SP2 for this).
My question is about the listed systed system requirements and how they might apply to my Mac Pro. I have a dual 2.26.
As a specific example, I was looking at the game Fallout 3. The box lists a 2.4ghz processor required but I've read on this forum about people running it great with less on their Mac.
So I was wondering what I would need to consider when looking at those requirements or if games in that range do indeed run well...

Thanks Kap, you're always helpful.
That's exactly what I was wondering. How the requirement on the box applied to having an 8 core at a lower clock speed.
I was looking at XP home at amazon and newegg, but haven't been able to tell if they are 64 or 32 (unless that means just install that version from the disc).
It's nothing pressing, just something I was entertaining for now.

Design question about Coherence as a event source

Hi Guys,
could you please help me with designing the following use case in the CEP way?
I have a Coherence cluster with several types of objects. Each object has its state. I would like to generate a specific warning event whenever the state of the object in Coherence has not changed in specific amount of time and store it back into Coherence (different named cache).
Is this something that can be implemented in CEP? How the flow in CEP would look like?
Kind Regards,
Martin

Martin,
You need to write a class that implements com.tangosol.util.MapListener interface and use that as a <wlevs:cache-listener> to the cache you configure in CEP spring file. The class must also be an event source, which sends insert events for cache update and insert events from Coherence (entryInserted, entryUpdated). These events must be sent to a downstream processor which has a non-event detection query configured. You can find more info for writing such a query at http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e12048/pattern_recog.htm.
Hope that helps,
Manju.

Question about building a page in fireworks and 403 forbidden

Hi guys,
Thanks for any input you can give me on this.
I've been trying to recreate a page from our website in fireworks. The page can be located here:
http://sevenbarfoundation.org/newsletter-mg/general.html
I'm kind of new to this, and I have been able to generally recreate the page in fireworks by copying the images and rebuilding based on dimensions. It is when I try to upload the page that I am running into problems.
Once I have the page looking how I would like it I have exported it and saved it as CSS and images. From there it looks like I should open it in dreamweaver which I have done, but i'm not really sure what to do there. It basically seems like people just use dreamweaver as the FTP client. I have tried this as well as uploading it through my own FTP client, and each time I get a 403 forbidden when I go to look at the page.
Any help here would be great. Just trying to figure out if I am not saving it properly in one of those two programs. It gives me an .htm file, a css file and a png file which I have uploaded onto the server into the folder that I need it to be in. Just keep getting that annoying 403!

First, Dreamweaver is much more than a glorified FTP client! Dreamweaver is a Web site authoring and management application. That is the program you should use to build your HTML, not Fireworks.
Fireworks is a Web layout/design and graphics production application. Fireworks can export HTML or HTML and CSS, but that export ability is intended to create mockups and prototypes, not live sites. The code Fireworks creates is...well...awful. You need to learn how to write HTML from scratch, not let a graphics program write it for you.
The single .png file is also not going to work for you. The page you link to has several separate images. You need to create slices on your Fireworks document and export them as individual images, which you then reference in the HTML.
Here are a couple of good tutorials for beginners:
http://www.sitepoint.com/article/html-css-beginners-guide/
http://net.tutsplus.com/tutorials/html-css-techniques/design-and-code-your-first-website-i n-easy-to-understand-steps/
This tutorial is on the general theory of slicing. As such, it's helpful: http://www.slicingguide.com/
In Fireworks, you use the slicing tool (looks like a green rectangle), to draw slices over the areas you want to export as individual images. These green rectangles appear in the Web layer. You can set the export properties of each slice separately. When you export, you can export all your images, or just the images from selected slices. And I really haven't said anything, so start with the help files, then post back with specific qustions.
As to your 403 error problem, it's something with the configuration of the server, it has nothing to do with Fireworks or Dreamweaver. Read these articles:
http://www.checkupdown.com/status/E403.html
http://en.wikipedia.org/wiki/HTTP_403

Is it possible to get the decline and answer buttons from sleep mode?

The way my iphone operates now, when a call comes in and the phone is in sleep/locked mode, the only option is to slide the lock to answer the call. When a call comes in and the phone is not locked, it gives the option to decline the call with a red button and answer the call with a green button. My question is this: Is it possible to set the phone so it gives the decline/answer option coming straight out of sleep/locked mode?

Nope. But single clicking the Sleep/Wake button will silence the ring, and double-clicking the Sleep/Wake button will send the call to voicemail, having the same effect as "Decline."

Tv/monitor resolution switches when mini wakes up from sleep

I have a mac mini c2d with intel graphics on leopard 10.6.2 connected to a sony 46w4100 tv. After updating to 10.6.2 when it first came out (i had used 10.6 and 10.6 aswell before this and this problem did not occur) i immediately noticed an issue. when i put my mac to sleep and wake it back up, instead of outputting to tv as a media player so that i have access to detailed picture settings, it reports itself as a PC thus limiting what i can change and the picture quality. i mainly use this as an HTPC, and its a problem since wiht my tv(not sure if ohter tv's have this), settings for connecting to dvd/blueray player/satellite receiver are extensive and picture is sharp, vs connecting it to computer where you only have the option of text and video and the video is not as vibrant or sharp. if i shutdown the mac and start again ,ir goes back to normal, but if i sleep and wake up, this behaviour occurs. 10.6 did not have this problem neither did 10.6.1. infact with 10.5 my mini always reported as PC thus i had limited options but with 10.6 i was happy to notice it was fixed.
is there someway to avoid this other than just ensuring my mac never goes to sleep (wasteful since its not in use most of the day). is anybody else seeing this issue and do you think this is a bug or aws the 10.6 and 10.6.1 behaviour a "bug" that apple has decided to fix.

also note the topic may be a bit misleading, when the mini wakes from sleep it is still outputting 1920x1080 so resolution does not change. when i first turn on mac, the sony tv shows 1080p output, full screen, etc etc and all the settings. when i wake from sleep and turn tv on, it doesnt have any any of that info so it doesnt even tell me its 1080p but it is.

Question about HP 2311xi - auto-switch source and delay wakeup from sleep

Similar Messages

Maybe you are looking for