Question about hwmon; knowing which Temp correspond to CPU or Mobo??

Hi all, well my problem is this:
I want to monitor my CPU temp
I have a Athlon X2
So reading here in the forums, i read how to use conky and hwmon to display the temps. So far so good, BUT in: /sys/bus/pci/drivers/k8temp/
i get 2 readings, temp1_input and temp3_input, so since im a noob, i realized that temp1_input was always hotter than temp3, so i said: ok, thats the CPU temp and the other its the motherboard, BUT when i start to do demanding things on my PC, the supossed MB temp get olmost as hot as the supossed CPU temp
So now i dont know if each reading correspond to a core, and temp1 + temp3 equals to my total CPU temps, but the readings of the temps in the BIOS shows that the temp is actually like temp1_input (like 32 ºC),  so that make me wonder that maybe my MB gets hot as the CPU which i find it weird (right now temp3_input shows 26ºC
So my question is, how can i know for sure to which component those temps correspond??
Anyway that i can provide more info please tell me how
And thanks in advance for any help :]
using Ksensors, it shows that temp1 correspond to core0 and temp3 to core1,  so that means my CPU is at olmost 60ºC :S??
its a brand new X2 5600+ whit artic silver and a good cooler (nothing fancy but still)
Last edited by AlmaMater (2007-12-05 06:44:29)

I wouldn't care about it If each core stays below 45-50°C.
And you'll never get exactly the same readings for both cores as it's very unlikely with today's software that both will be used uniformly.

Similar Messages

  • [AMD] question about the fx-53 temps, n00b in OC

    hello there, i never done any OC before but before i do it i wanted to know if my temps at stock speed and stock HSF are ok
    idle: ~47º C
    load: ~60º C
    northbridge idle: ~48º C
    northbridge load: ~50º C
    my pc is located on a place that has a very bad air circulation, does that change much the temps?
    BTW: i measured those temps using SpeedFan, is it reliable?
    TIA

    having a better look i think the airflow inside the case stinks :( but there's almost no room to move the cables around, specially the one that gives power to the motherboard, it's very thick and there's no good position i can put it, another one that is blocking the airflow to the top fan is the flat ide cable to the dvd drive, i'll try to find one of those round ide cables but they are really hard to find here in brazil :(
    what's really strange is that after i moved back the pc to the closed desk it's now burning hot! just so you have and idea my hard drives got to 50ºC. i must have done something really stupid with the cables that completely stopped the airflow, but i can only have a better look at it on the weekend :(

  • A question about clearing SM_OBS_DLL in temp folder

    Hi,
    Our users are experiencing issues like this "The requested action is not supported for this object [message 131-171] ". According to the searching result, removing SM_OBS_DLL folder in temp folder could fix this issue. But the problem is our users are processing hundreds of orders every day and these issues impact their efficiency a lot. Is there any permanent solution for this?
    P.S. our SAP B1 version is 8.8 PL17
    Thanks,
    Lan

    Hi Lan and Marc,
    Unfortunately the DI API has never been particularly stable when processing larger amounts of data over extended periods. The error message you receive may not actually be related to the problem. Some patches are better than others. Are you able to do any testing on a different patch?
    Is there any monitoring you can do (eg track the memory usage of your add-on over time) on a workstation?
    Also, if you are not already doing so, I recommend you garbage collect any DI API objects as soon as you've finished with them:
    public static void DisposeObjects(Object obj)
        System.Runtime.InteropServices.Marshal.ReleaseComObject(obj);
        obj = null;
        GC.Collect();
    Kind Regards,
    Owen
    P.S. Incidentally the way that the DI API runtime files are copied to the workstation is changing in 8.82 so, if you can't find a solution in your current version, you could look at 8.82 to see if that makes an improvement.

  • I have a question regarding a small blue question mark instead of photo, I asked about this and was directed to a question about text edit, which, by the way, a neighbour helped with.

    Email photographs not seen, photograph are replaced with a small blue question mark.....what do I need to do to see the pictures ?

    Hello tomfromridgetown,
    Welcome to the Apple Support Communities! 
    I understand that sometimes when you receive an email it contains a small box with a question mark for the attachment. It sounds like what you may be seeing is a windmill.dat attachment. Please review the attached article for information on what these attachments are and how to avoid them in the future. 
    Mac OS X Mail: What is a winmail.dat attachment? - Apple Support
    Have a great day,
    Joe 

  • [solved] question about two soundcards which use the same module

    Hi
    I have two external soundcards, an Edirol UA-25 and a MAudio Transit. Both use the snd_usb_audio kernel driver. When I only had the MAudio, I configured it to be soundcard number 2 with the following in /etc/modprobe/modprobe.conf
    options snd-usb-audio index=2
    Now I'd like to have one be soundcard number 2 and the other one soundcard number 3. The internal soundcard is number 0, my tv card is number 1, I don't want to change that.
    How can I do this?
    Last edited by Army (2011-08-26 16:31:10)

    Ok, works. For documention, here's what I did:
    If you have two (or more) soundcards, which use the same kernel module, this is what you need in your modprobe.conf (or call this file just like you want, it only has to be in /etc/modprobe.d and has to be called *.conf)
    options snd-usb-audio index=2,3 vid=0x0582,0x0763 pid=0x0074,0x2006
    This is what I have now. Index is the number of the card, e.g. you see those numbers in alsamixer when you press F6. The vids and pids you can get with
    lsusb -v|grep idVendor # this is for the idv
    lsusb -v|grep idProduct # this is for the idp
    Just pick the line which stands for the soundcard, put these ids into the *.conf file and you're done. Now it doesn't matter in which order you plugin the soundcards, they get the right index.
    Quite easy after all

  • Question about a bug which should be fixed in the 10.2.0.4 patchset

    Hi,
    We have a 10.2.0.4 single instance database on Sun Solaris SPARC (64-bit) and have the same symptoms as described in Bug 4643723 (error codes and the stack trace are the same). That bug should be already fixed in 10.2.0.4 patchset.
    Does anyone have experience on how to proceed in such cases - I mean, is making a SR on metalink an obvious action?
    Is it possible that the patchset wasn't applied correctly although "opatch lsinventory" outputs that the "10g Release 2 Patchset 3 (10.2.0.4)" is installed and SYS.REGISTRY$HISTORY also contains a record of the upgrade. The upgrade from 10.2.0.1 to 10.2.0.4 was performed 6 months ago and the database was continuously up and runing till then.
    Thanks for any answers

    many bugs can have the same errors. Raise an SR.
    Oracle Support will ask for an opatch lsinventory, and may ask you verify library versions, or relink.

  • Question about context in which Facelets runs

    I am converting my application from JSF-over-JSP to Facelets and it is going really well so far. The Netbeans template set up a Facelet's template for me with a starter-set CSS reference that looks like this:
    <link href="./css/default.css" rel="stylesheet" type="text/css" />
    <link href="./css/tableLayout.css" rel="stylesheet" type="text/css" />This works the way you would expect. However, when I create client facelets in a subdirectory and use the template in the root directory, the hrefs are broken because they are evaluated relative to the subdirectory, not where the template is located. Changing the references to this:
    <link href="/css/default.css" rel="stylesheet" type="text/css" />
    <link href="/css/tableLayout.css" rel="stylesheet" type="text/css" />Doesn't work. What does work is this:
    <link href="/MyApp/css/default.css" rel="stylesheet" type="text/css" />
    <link href="/MyApp/css/tableLayout.css" rel="stylesheet" type="text/css" />Although this works it strikes me as poor practice because if this application is deployed in a container as something other than "MyApp" the references will be broken again. Is that correct and if so, is there a better way of handling this?

    >
    Why not simply use this :
    <link href="css/default.css" rel="stylesheet" type="text/css" />
    That's pretty much what I started with; isn't "./css" pretty much the same as "css"?
    What I was trying to avoid was replicating the css subdirectory in all the subdirectories that use it. My structure is:
    /template.xhtml (has CSS references in it)
    /home.xhtml (refers to /template.xhtml)
    /css/default.css
    /user/somepage.xhtml (also refers to /template.xhtml).I don't want to add
    /user/css/default.cssbecause the file is redundant. (in my app uses one stylesheet set for all pages).

  • Question about Compaq Presario CQ43

    Hello, I have a question about my notebook which is a Compaq CQ43-172LA. The thing is, I was wondering if I could change my processor. My processor is a AMD-Single Core E-240 (1.5 Ghz). And if it can be changed, what model do you recomend that would fit my notebook?

    Yes, please aim so interested in this!
    Somebody, maybe an expert cand tell us?
    We know that you know, !

  • Questions about Access Manager tutorials available in netbeans site

    Hi
    Thank you for reading my post
    I have some questions about two tutoral which i find in :
    http://www.netbeans.org/kb/55/amsecurity.html and
    http://www.netbeans.org/kb/55/amsecurity-liberty.html
    here is my problem :
    we have some web services, now we want to have authentication applied for consumer who try to access our web services.
    we need to have most possible flexibility because we may deploy the server for a customer with an already established Identity database ( Database Table with user details)
    Also we need to have Transport level security using SSL.
    I read and studied both of them and now i have some questions :
    -I think Securing Web Services Using the SAML or UserNameToken is what we need for authentication and autorization of web service consumers?
    is that right?
    -Does Sun Java System Access Manager provide flexibility to authenticate user/password with a database table content?
    -How we can apply roles in Sun Java System Access Manager when we authenticate users ?
    Thanks

    Imagine that we want to have an end to end security for our web services
    we thought that we could use message level encryption to protect the soap message and also we should protect our web services from un-authenticated acess,
    we will use userName token for this.
    Our customer has large database which contains many user/password and role of those users.
    some of web services should be available to higher role (manager) and not for all users.
    so we should check a user role before we allows him/her to access a web service.
    my question is whether Sun Access manager can help us with this? or there are other configuration or packages that we should apply to have this feature.
    to explain more :
    our client side is a swing application, users enter username/password to login into system. after they loged in, we send user/pass every time user want to request some data from some services. (is it good to send user/pass every time?)
    We want Sun Access Manager to handle users authentication .
    We also need to handle role related authorization, can Sun access manager handle this?
    Thanks

  • Ask question about asp mvc5

    hi
    i've some question about mvc5 /asp which is the right forum?
    thanks 

    Here you go: http://forums.asp.net/1146.aspx/1?MVC

  • Question about TravelSound 400.

    Hi, I'm new here and i have a question about TravelSound 400 which i bought several days ago. Can someone tell me why the speakers activate the bas boost or sth like that while connected to the phone and while running on batteries, when i turn it too loud the start to distort bas tones. On the other hand, when i use them with the same phone and I'm playing back same track but now it's plugged to a power adapter the don't distort and i can turn it even louder. Can someone please explain it to me ? Thank you for furthr repliyng.
    If there are any mistakes, sorry I'm not native english speaker.

    That's faulty logic. Once the alkalines diminish to that point, there isn't much life left in them. You're far better off using the NiMH batteries. The added benefit is that the voltage level is almost flat during most of their usage cycle, so you should have fairly consistent performance. If you have concerns about having to frequently charge batteries or not having replacements around when you need them, consider some of the low self-discharge NiMH batteries that are often sold as "pre-charged" as those batteries will hold an 80% charge for 6 months to a year depending on the brand. If you need a brand suggestion, try the Sanyo Eneloops.
    buddy101 wrote:
    I use 4 Ni-MH batteries 650mAh each. All four have a voltage of 4.8 Volts, each 1.2V. So it should only distort when they are fresh after loading when the batteries have about 1,5V each. Maybe i should use them now for a while and maybe the performance will be better.

  • HT5312 HOW TO KNOW THE SECURITY QUESTIONS ABOUT APPLE ID?

    HOW TO KNOW THE SECURITY QUESTIONS ABOUT APPLE ID?HOW TO KNOW THE SECURITY QUESTIONS ABOUT APPLE ID?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 on the page that you posted from should let you reset them : go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use
    For future info typing all in capitals is considered shouting and makes posts difficult to read, and may mean that people don't reply

  • Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update.  EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off.

    Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off. never had this trouble with my 3...I don't even want to talk to anyone on this phone! Is the sensor bad? That is what the AT&t rep suggested.

    Restore as new... if the problem still continues then there is a hardware issue.
    If it stops after a restore as new, then the issue is with the backup the device is currently setup with.

  • Question about personal hotspot. I know I can share GSM / 3G but I would like to know if my iPhone is connected to a wifi can I also share that wifi collection, through personal hotspot?

    Question about personal hotspot. I know I can share GSM / 3G but I would like to know if my iPhone is connected to a wifi can I also share that wifi collection, through personal hotspot? And if so can it be through wifi or does it have to be Bluetooth or USB?
    Sounds like an odd question but my phone will connect to BT Openzone so I want to share that with my iPad via personal hotspot. I could use 3G but then it comes off my data allowance and I don't want to have to buy a separate SIM for my iPad if I can avoid it. I can swap my sim from my phone, but that's a pain!
    Thanks
    Luke

    No, unfortunately Personal Hotspot will only use your 3G plan.

  • I'm a beginner and would like to know which Photoshop to use (so many options). The only edits I care about being able to do are: whitening teeth, smoothing complexions/taking away blemishes.  Does any photoshop have these options? I haven't been able to

    I'm a beginner and would like to know which Photoshop to use (so many options). The only edits I care about being able to do are: whitening teeth, smoothing complexions/taking away blemishes.  Does any photoshop have these options? I haven't been able to find the teeth whitening one anywhere. Also, I don't want it to lessen the high quality if my photos.  Thank you so much!!

    Hi Erika,
    I came to Lightroom quite recently (in the last month!)  from Photoshop Elements 11. I like the organization features in LR better, but for adjustments such as the ones that you mentioned I would leave LR and go back to Photoshop Elements 11, primarily because that is what I know. I don't use the subscription service, mainly because I already owned and installed the boxed version of Photoshop Elements 11 and adding it to a subscription service with Lightroom seemed redundant. I am sure someone in the community will (or has) comment(ed) that it is possible to whiten teeth and cure blemishes within LR, but I haven't figured out how to do that yet. Check out the TV Adobe free tutorials, particularly Julianne Kost's tutorials. She has a good presentation style and you might find the LR answer that you need with detailed instructions.

Maybe you are looking for