Question about image size from app developer

Hi
I am developing an android app that prints through eprint, so this is directed to HP Staff
What is the correct size of a jpg image to take up the whole page?
In this app, i am unable to use PDF's, so i want to try using a full page jpg and insert the data onto that, then send the whole page to an eprint email address.
I tried a standard 612 X 792 pixel page (72 dpi), but it only takes up alittle more than a quarter page.
i need it to be the right size for any of the eprint printers.
thanks
--Karl

1: Decrease the size as you describe.
2. Go to File>New or Ctrl N
3. Make the box 8.5x11. Make sure the other data conforms to your image.
4. Now,holding down Ctrl-Shift, Drag the image to the new box and release the mouse. Your image will be centered in the box.
Note: there may be a method to do this including any adjustment layers, but I usually only do this as a last step, flattening a copy of the working file.

Similar Messages

Question about image size of multimedia messaging!

Is there any way to send the images of original size . I mean when your select large size in settings still the picture is resized 240*180 . isn't there anyway to send images of size 640*480 ?? by mms
i want to send images of their original size ...
Please kidnly help me !!!!

It depends on two things: The phone model and whether the operator's MMSC allows it (or has a size limit).
On S60 based devices like then N73 or others, you can open the "Messaging" app, hit "Options", select "Settings", then "Multimedia message" and change "Image size" to "Original".
This won't help if the operator's servers then reformats the image, or refuses to send it alltoghether because it is too big.
And, of course, even if you get past both your own phone's limitations and the operator's networks, the recipient's device must also be able to handle it.
If you want guaranteed delivery of original, unmodified images, use email instead of MMS.

Question about image size, canvas size and Picture frame

Hi,
This has always been a little confusing so let me describe what my question is:
Assume I have a created a new PSD that is 8 1/2 x 11.
The canvas size is the same 8 1/2 x 11.
I want to put a border around the picture (say 1/2 of an inch all around), and put the finished picture in a Picture frame. After it is in the frame, you would be able to see the entire picture plus the border.
Q. Should I change (reduce image size) of the PSD to (for this example), 8 x 10 1/2. Then increase the canvas size to 8 1/2 x 11. After I increased the canvas size, do a Paint Bucket fill with white (to create the White border)? then print the changed size PSD on 8 1/2 x 11 paper so that it will fit into a 8 1/2 x 11 picture frame
I realize I could have just created the new PSD to be 8 x 10 1/2 in the first place.
Hope I made this somewhat clear.
Bob

1: Decrease the size as you describe.
2. Go to File>New or Ctrl N
3. Make the box 8.5x11. Make sure the other data conforms to your image.
4. Now,holding down Ctrl-Shift, Drag the image to the new box and release the mouse. Your image will be centered in the box.
Note: there may be a method to do this including any adjustment layers, but I usually only do this as a last step, flattening a copy of the working file.

Questions about image size and password

Is there some way to click on an image in iWeb and determine what its file size is?
When the Inspector shows Photo Download Size, does that pertain to all photos on one particular page?
Is there any way to password protect certain pages of a site, or create a subsite that is protected?

For why your files went to 30GB, see this post.
https://discussions.apple.com/docs/DOC-3941
Use iDVD to burn a DVD. If you have a new Mac that did not come with iDVD, see this post for several options.
https://discussions.apple.com/docs/DOC-3711

Question about image sizes and calendars

I'm making a cookbook calendar and am laying out pages with pics and recipes in inDesign and then exporting them as jpegs into iPhoto to place on the calendar. The calendar is supposed to be 13X10 inches (WXH) but when I size my images to this size in inDesign they are way too big on the calendar. They only fit when I size them to 10X8... is there a reason for this that I can't figure out??? Are they going to print small or will iPhoto automatically resize the images to match the calendar?
Any help would be appreciated!

Welcome to the Apple Discussions. Are you referring to the single, large photo for each month? If only takes up 1/2 the full page of the calendar. The calendar is 13" high x 10" wide. So for a full page photo at the start of each month you would want a 10' x 6.5' image. That's why the 8 x 10 is working better but probably is displaying some cropping if I remember correctly.
OT

I see lots of people asking questions about the "white screen" app store update failure. I see no answers from Apple about this...What is the problem, and what is the solution?

I see lots of people asking questions about the "white screen" app store update failure. I see no answers from Apple about this...What is the problem, and what is the solution?

It's a problem that Apple is having with their App updating system. The best solution is to be patient, and wait for Apple to solve their systemic problem.

How can you find out an individual image size from multiple images on a canvas

This is probably a really really simple question but I can't for the life of me find how I can find out an individual image size from multiple images on a canvas. eg I have 3 photos i want to arrange 1 large and the other two next to it half the size. How can I edit individual image size on the canvas as when I select the image on a sperate layer I want to resize it just resizes the entire canvas and not the individual image
Thanks

I want to know they exact dimensions though. You can get them by dragging to the 0,0 corner and then reading off of the ruler scale on the sides but its fiddily as you have to zoom right in and work it out. I know in photoshop there is a ruler but is there any other way in Elements?

Question about tranferring data from iPhone 3gs to iPhone 4

I just had a couple quick questions about transferring data from my old phone from my new iPhone 4. The reason i am wondering is because i am worried about whether i will encounter any problems when doing so.
First off i have already sold my phone today, i reset all data and settings from the phone and gave it to my buddy so its gone. I did a full sync and backup yesterday so all the necessary files should be on my computer(windows 7). Now, im basically wondering if i will run into any problems if i restore my iphone 4 from a backup. My 3gs was running 3.1.2 on att. Now i know IDEALLY i would have updated it to iOS 4 before backing it up and used the newest version of itunes, but i did not. Does anyone think this will be a problem for me?
Now with that out of the way, my biggest fear is losing my old data(text messages and notes mainly because i am a pack rat for those type of things) so id like to be SURE that none of my old backups will be deleted in any scenario. The reason i dont just restore it right now is because i want my new phone to be as clutter free as possible. I am going to be putting on here only the apps that i used often and would basically like to transfer over the BARE minimum; texts, notes, and highly used apps... So i guess my main question is can you transfer over only certain things like texts and notes after setting up the phone as a new phone. And if i were to set up the phone as a new phone what would happen to my old backups? Would i be able to selectively restore?
Im afraid that it might not be a possibility to transfer only certain things even though it should be.. i should be able to select a text messages folder and put it on my new phone and be done with it... But anyway i dont want to rant. Can anyone explain to me how this all will work?
ULTIMATE GOAL: Transfer only texts, notes, certain apps(and their data) and NOTHING ELSE.
MOST IMPORTANT THING: Not losing texts and notes. I can deal with putting all the old **** on my new phone and cluttering/slowing it down if i NEED to.
Thank you in advance, sorry for the long post.

If the most important thing for you is keeping old text messages, notes, and voicemail, then you'll need to sync the phone from your existing backup. I know of no other way to access those items.
Once you have synced to the new phone, check that you have those items that were important. Then you can reconnect your phone to iTunes, and change the sync settings to remove the apps or other items you no longer want to keep on the phone.
iPhone backups are stored by iTunes; you can see them by opening your iTunes preferences, clicking on "Devices" and then looking in the window. You can delete old backups from here. I don't know how you can open/read the backups though.
I don't expect you'd have any problems syncing from your old phone's backup, but it's definitely an either/or situation. Since you got rid of the old phone already, it's too late to email yourself your notes, or copy the text messages. Your previous backup is your only solution.

Image size from header

Hi,
I'm trying to extract image size from header for PNG, JPG, TIFF, BMP and GIF files. So far I got PNG working. I'm having problems finding size info for JPG files. Anyone knows where I can read about it (i didnt find nothing on google) or have the code that works? also for the other image types?
P.S. I dont wanna read the entire image using Image class cause its too slow.

Code Snippet:
ImageInputStream imageStream =
        ImageIO.createImageInputStream(/*File or InputStream*/);
java.util.Iterator<ImageReader> readers =
        ImageIO.getImageReaders(imageStream);
ImageReader reader = null;
if(readers.hasNext()) {
    reader = readers.next();
}else {
    imageStream.close();
    //can't read image format... what do you want to do about it,
    //throw an exception, return ?
reader.setInput(imageStream,true,true);
int imageWidth = reader.getWidth(0);
int imageHeight = reader.getHeight(0);
reader.dispose();
imageStream.close();

3 questions about texture sizes

Hi there all,
I have 3 questions about texture sizes. First off, after
doing a search in this forum, I found out how to find the maxium
texture size my hardware can handle. However, this is only
currently tells me what the texture size I should use for my
computer. So basically, what my first question is, I wanted to know
what would be the average texture size for PC's. Why I ask this is
because arfter doing the command that finds my maxium texture size
that my computer can handle, it says that I can handle up to
2048x2048, but this doesn't help if lets say the standard hardware
texture size is 1024x1024.
My second question is, when you speak in maxium hardware
texture size terms, is this for per object, per scene that is
loaded into memory, or for the entire game?
... and my last question is, does hardware texture size also
include basic shaders as well (meaning with no textures)? If not is
there a limit on that as well?

1. If you know what maximum texturesize the endusers
graficcard can handle, you can build a switch to different *.w3d
files with that are saved with different texturesizes. you can see
how the hardware variates:
http://nuttybar.drama.uga.edu/pipermail/dir3d-l/2005-September/009554.html
but don't forget that the macs are limited at the moment to a
maximum texturesize of 512x512. If the textures are bigger then the
maximum texturesize they are scaled down to it. In your example a
texture that is 2048x2048 would be scaled down to 1048x1048 if this
is the maximum texturesize of the endusers machine.
2. The maximum texturesize is per Texture. But the Textures
are stored uncompressed in the VRAM of the graficcard. There is no
way to check how much RAM is left and i am not sure what happens if
you put a lot of data in it.
3. A shader only layers textures like photoshop and renderes
them depending on the settings of the shader. The maximum hardware
texture size only limits the size of the texture, if you use no
textures in the shader (setting all texturelayers to void) the
model will be only rendered depending on the values that are given
by "ambient", "emissive", "diffuse", "specular"
Just want to add here that textures should be in this sizes:
1x1, 2x2, 4x4, 8x8, 16x16, 32x32, 64x64, 128x128, 256x256,
512x512, 1024x1024, 2048x2048, 4096x4096 ...
but can be also be combined like this:
32x1024 or 512x256 and so on. this is just good to know.
If textures do not fit into this grid of pixel values, the
texture will be scaled up or down to the next size that is closest
to it.
if you type this code into the message window and execute
every line, you can check the resulting texturesize.
global pImage
pImage=image(100, 1000, 24)
member("world").newtexture("image", #fromimageobject, pImage)
put member("world").texture("image").width
-- 128
put member("world").texture("image").height
-- 1024
This will happen to all textures if they enter the
graficcard.

Question about receiving mesage from those not on ...

I have a question about recieving message from those who are not on my contacts
I enable anyone to contact me through IM and call. a friend who I did not yet add as a friend (not in contact)call me by mistake. he sent message of apology to me, say "sorry for mistakeing call,"
but, i did not recieve such mesage, even thoughh i got notification of call, why did not i recieve his mesage if i Can receive IM from anyone not on contact list??
i try to send him mesage to test. He also did not see my mesage show up ,, on his screen it only show that he call by mistake and that he sent mesage ((which, i never recieve).
i try this on some of my friend's friend who has enable all call and IM through, they also did not recieving mesage I sent them however can see notification of call i make.
does this mean, Only you can see mesage of those in contact list even though you recieve from any body? am i misunderstand How skype is working? Please enligthen me, thx...
thx for info.....

I'm not sure I understand you entirely, but you could put the CDs on the computer with a CD ROM drive and then boot that computer as a firewire drive to the computer without a CD ROM drive and then copy your music over.

Question about images....Image Size ... Augh!!!

I am curious about importing images into FCP. I understand that pixels in an image are square and that in video they are rectangular. When I import an image into FCP it looks great, until I export and then they take on a "fatter" look. I know that when you import an image as a Multi-layered Photoshop document that FCP will automatically adjust for it. But if you import a .TIFF, .PNG, or .JPEG that you will need to compensate for it's image size prior to importing.. (which is quite confusing)... I come across images of all ppi, resolution, and size.
Two things I have discovered.... If I import it as a Multilayered Photoshop file and then export it, I seem to lose quality. But if I import it without compensating for image size(it looks better within FCP) and then export it using Compressor with a DV NTSC 4:3 setting, it looks fairly dead on and the image maintains it's high quality.... but I know this is not the way to do it.
So here is my questions...
1) What am I doing wrong? Is there a simple formula to get it correct everytime?
2) Is there anyway that FCP can compensate for pixel changes on a single layer image or do I need to convert each image to a Photoshop Multilayer Document? Why am I losing quality?
3) Is there anyway to import single layer images and have Compressor export it how I see it on my computer monitor?
Thanks for any help....!
Gary

Hi Busso,
This forum discusses the Community Help AIR application and CS5 Help experience.Try posting your question directly to the Photoshop Win or Mac Forum:
http://forums.adobe.com/thread/685477?tstart=0

Question about the size af:inputText

can <af:inputText> grow itself automatically to avoid scrollbar?
if user types a long text into it, the inputtext area will become bigger to fit it to avoid scrollbar. is this possible?
another question is,i found the size of this input area are controlled by 'rows' and 'columns'.
can i make the inputtext area stretch to 100% width of the page?
i cannot use 'columns' to accomplish this, since the page resolution is different for users. it works on 1440x900,but fails on others.
thanks a lot
-Ken

cowbell bill wrote:
Still stumped, I've deleted all unused audio files, deleted all unused midi. Maybe a third of the project. I see nothing in the trash, Project size is still the same 3.25 GB. Bypassed all reverbs, And audio CPU level still maxing out in the red. What am I doing wrong. Thanks Bill
When you speak about project size, do you mean the size of the project file itself? Or of the entire project folder?
When you delete tracks or plugins from your project, you won't see anything in the trash, that is normal. Only when you delete an audio file from your disk +from within Logic+ you'll find that audio file in the trash.

Question about java-based server app frameworks

Hello, I am working on a Java applet application and would like to choose a Java-based scalable server framework to use within my applcation. I have found a few like xsocket or QuickServer and have a question about other. And, also, which is the one You may advise? Yours sincerely, Slawek

For online gaming server. I first heard of xsocket and started using this, but have the problem with NAT. I now know that I need to initiate connections from client behind NAT (server has a public IP) and send messages from server to client within the same connection. I am doing this the following way (as shown in examples- below), but it appears that server receives messages, but client doesnt. I dont listen on any ports in client application and just need to take advantage of the connection initiated (information go from client to server properly).
Server-
try{ nbc = pool.getNonBlockingConnection(inetAddress, 8090);
try{ nbc.write("|01|______|02|______|03|______|04|______|05|______|06|______|07|______|08|______|09|______|10|______"); }catch(Exception ee){}
}catch(java.io.IOException f){}
Client-
public boolean onData(INonBlockingConnection nbc) throws IOException,ClosedChannelException,BufferUnderflowException,MaxReadSizeExceededException{
String x = nbc.readStringByLength(100);
System.out.println("S >> C = "+x);

Question about Offset printing from Indesign

Hello everyone, I have a question about printing too a DPX rip platemaker from Indesign. When I print my file to the rip, it seems to bold the text when it should not be bold, I do not know if this is an Indesign or rip error, but if anyone has a solution I would be grateful for any assistance.
I dont know if it's necessary, but the OS with Indesign is Mac OSX, printing to a ripmate on Windows 2000.

Have you applied an outline to the text?
Try unoutlined text
Is the text near an effect like drop shadow or other filter?
Move the text to top layer or above any effects.
Is it just this file or any file?
Need to figure out if it's just this job or all of them or at least let us know.
Have you got the fonts installed at the RIP end, perhaps it's rasterising text that the RIP has not got the font?
You could try exporting to PDF first, that would embed the fonts in the PDF.
Let us know if any of this helps?

Question about image size from app developer

Similar Messages

Maybe you are looking for