Question about iMessage retrieval when messages are visible with "Search" feature
Hello everyone,
Today when I got off of work, I noticed that over 1,000 iMessages from my girlfriend had been deleted, dating as far back as when I purchased my iPhone 4 in June. Of course, I am in the process of freaking out, as we had some great conversations in there that I would like to save. The last time I backed up my iPhone was in September.
The thing is, when I search for her name with the iPhone "Search" function, all of those conversations appear as if they should be in the iMessage list, but they are not. Is there anyway for me to exploit this and restore these iMessages onto my phone?
I'm an Air Force pilot in Texas and don't get to see her much, so I would love to be able to save these messages. I also went to school for electrical engineering, and I'm stumped.
tl;dr iMessages accidentally deleted but still appear in the iPhone "Search" function - is there anyway to restore them?
Unfortunately, not that I'm aware of. The cached data you are seeing in Spotlight search is separate from the messages data on your phone, and you can't restore from one to the other.
Messages are, however, included in the iPhone backup (whether done with iTunes or iCloud). If these messages were on your phone when you last backed up, restoring to the entire backup should recover them.
Similar Messages
-
how do i disable iMessage from my mac, i have looked at other comments and there is no option to disable it when messages are open
Solution may be found if you search in the "More Like This" section over in the right column.
-
do you know what it means when messages are blue on iphone
Green messages are normal SMS messages and consume your carrier's SMS plan messages. Blue messages are those sent via the new iMessage service and are sent over a wifi or data connection. They do not count toward SMS limits, and can be sent to anyone with iMessage activated on any iDevice - iPhone, iPad, or iPod.
-
How can I view my messages in mail, I only can see incoming emails, but the the screen where the message must be visible is empty. Also attachements are nog visible. These messages are visible on my Iphone. thanks
And attached is a screen grab showing selected e-mails in the Inbox...the white space below are e-mails too!
-
HI
i am keep seeing this message in ulsviewer of splogs in a webfront end server
Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb objects when you are done with all objects obtained from them, but not before. Stack trace:
at Microsoft.SharePoint.SPWeb.get_Exists()
at Microsoft.SharePoint.WebControls.CssLink.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP._layouts_icc_icc_scan_view_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
adilHi,
Your SPweb object is not disposed properly.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/3a25eb86-8415-4053-b319-9dd84a1fd71f/detected-use-of-sprequest-for-previously-closed-spweb-object-please-close-spweb-objects-when-you?forum=sharepointdevelopmentprevious
http://sharepoint.stackexchange.com/questions/50793/detected-use-of-sprequest-for-previously-closed-spweb-object-after-spquery
Please remember to click 'Mark as Answer' on the answer if it helps you -
I have develop a custom solution for SharePoint Foundation 2010 that provide PDF documents filled with lists data and attachemnts.
If the Customer run the solution to get the PDF we found in the ULS log following entry:
03/07/2014 12:07:20.69 w3wp.exe (0x0B10) 0x18EC
SharePoint Foundation General 90hv Unexpected
Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb objects when you are done with all objects obtained from them, but not before. Stack trace: at Microsoft.SharePoint.Utilities.SPUtility.GetLocalizedString(String
source, String defaultResourceFile, UInt32 language) at Microsoft.SharePoint.SPFieldCollection.get_DisplayNameDict() at Microsoft.SharePoint.SPFieldCollection.GetFieldByDisplayName(String strDisplayName, Boolean
bThrowException) at Microsoft.SharePoint.SPFieldCollection.GetField(String strName, Boolean bThrowException) at Microsoft.SharePoint.SPListItem.GetValue(String strName, Boolean bThrowException)
at Microsoft.SharePoint.SPListItem.get_Item(String fieldName)
at ECM_PDF_Excel.ListClicked.GetECOs(Dictionary`2 searchedEC... e918ecd4-7ed6-44bb-9e4f-d764586a2f79 ...RECONumber)
at ECM_PDF_Excel.PDF.Create() at ECM_PDF_Excel.Layouts.ECM_PDF_Excel.ECMPDFExcel.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext
context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 f... e918ecd4-7ed6-44bb-9e4f-d764586a2f79
03/07/2014 12:07:20.69* w3wp.exe (0x0B10) 0x18EC SharePoint Foundation
General 90hv Unexpected ...lags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32
flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) e918ecd4-7ed6-44bb-9e4f-d764586a2f79
We check the method
/// <summary>
/// Returns the ECOs in a Dictionary: ECO Number, Suffix
/// </summary>
/// <param name="searchedECRECONumber">Dictionary, with the search ECR/ECO Number</param>
/// <returns>Dictionary ECO Number, Suffix</returns>
public static Dictionary<string, string> GetECOs(Dictionary<String, String> searchedECRECONumber)
SPSite siteContx = SPContext.Current.Site;
SPWeb webContx = siteContx.RootWeb;
Dictionary<string, string> listECOs = new Dictionary<string, string>();
string ecoNumber = string.Empty;
string ecoSuffix = string.Empty;
if (searchedECRECONumber.ContainsKey(ConstantData.listClickedECONumberDictionary))
ecoNumber = searchedECRECONumber[ConstantData.listClickedECONumberDictionary];
else
return listECOs;
// Ich suche die ECO Nummber bei gegebener ECR Nummer
// Ich brauche den Listen Namen der in den Spalten Realtion ECR Number & Realtion ECO Number einen Wert hat
SPList dataList = webContx.Lists.TryGetList(ConstantData.listName_ECMExcelTemplateDataLists);
if (dataList != null)
SPListItemCollection dataListItems = webContx.Lists.TryGetList(ConstantData.listName_ECMExcelTemplateDataLists).Items;
foreach (SPItem dataListItem in dataListItems)
Object relationECRColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECRNumber];
Object relationECOColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECONumber];
if (relationECRColumnName != null && relationECOColumnName != null)
// Ich habe den Listennamen gefunden in dem Spalten Realtion ECR Number & Realtion ECO Number einen Wert haben
string searchedListName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_Title];
string searchedECOSuffixColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECONumber];
// Get the List from variable listName
listECOs = GetECOsDictionary(searchedListName, searchedECOSuffixColumnName, ecoNumber, relationECOColumnName);
return listECOs;
- What take we wrong?
- How can we avoid this message?
Regards
Jonnyenglisch
Ralf Happe - Christobal Colón N° 1 ES 07670 Portocolom Tel.: +34 6961 0375 7 @: [email protected] Skype: ralfhappe msm: [email protected] www.ralfhappe.com ralfhappe | soluciónesHere the code of GetECOsDictionary:
/// <summary>
/// Fill the dicionary with related ECO Numbers/Suffix
/// </summary>
/// <param name="searchedListName">String: the name of the list</param>
/// <param name="ecoNumber">String: the ECO Number</param>
/// <param name="relationECOColumnName"></param>
/// <returns>Dictionary</returns>
private static Dictionary<string, string> GetECOsDictionary(string searchedListName, string ecoNumber, Object relationECOColumnName)
SPSite siteContx = SPContext.Current.Site;
SPWeb webContx = siteContx.RootWeb;
Dictionary<string, string> listECOs = new Dictionary<string, string>();
SPQuery oQuery = new SPQuery();
oQuery.Query = "<OrderBy>" +
"<FieldRef Name='" + "Title" + "' Ascending='TRUE'></FieldRef>"
+
"</OrderBy>" +
"<Where><BeginsWith>" +
"<FieldRef Name='" + "Title" + "'/>" +
"<Value Type='Text'>" + ecoNumber + "</Value>" +
"</BeginsWith></Where>";
SPListItemCollection searchedListItems = webContx.Lists.TryGetList(searchedListName).GetItems(oQuery);
foreach (SPItem searchedListItem in searchedListItems)
// Wenn die geclickte ECO Nummer gleich der Listen ECO Nummer ist dann setze die gefundene ECO Nummer
string foundECONumber = (String)searchedListItem[relationECOColumnName.ToString()];
string[] splitECONumber = foundECONumber.Split(ConstantData.splitBy_Slash);
if (ecoNumber == splitECONumber[0])
ecoNumber = splitECONumber[0];
if (splitECONumber.Count() == 1)
listECOs.Add(foundECONumber, "0");
if (splitECONumber.Count() > 1)
listECOs.Add(foundECONumber, splitECONumber[1]);
return listECOs;
Ralf Happe - Christobal Colón N° 1 ES 07670 Portocolom Tel.: +34 6961 0375 7 @: [email protected] Skype: ralfhappe msm: [email protected] www.ralfhappe.com ralfhappe | soluciónes -
I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it
Please authorize ADE 3 with same credentials that you used with older version of ADE
-
HT5105 How can you do picture in picture when you are working with a Multicam clip?
How can you do picture in picture when you are working with a Multicam clip?
Im doing a drumming music video and with the multi cam clip all the angles are nicely sync'd top the audio.
Problem is if i want to have 3 angles on top of the main shot, im gonna have to re-sync them all to get them to line up manually. If i could use the multi cam clip they will already be aligned
Thanks for trying to help appreciate, hoping someone has some multiclip knowledge and will be able to tell me if yay or nay. -
Revision: 3406
Author: [email protected]
Date: 2008-09-29 13:25:10 -0700 (Mon, 29 Sep 2008)
Log Message:
Tweaks to ZipCodeValidator to ensure error messages are consistent with pre-patch behavior. Mustella tests pass (verified via cyclone).
Reviewer: Deepa
QA: Yes
Localization: Yes ***
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/framework/bundles/en_US/src/validators.proper ties
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/validators/ZipCodeValidator. asHi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V. -
How to backup a rootenv when there are subfolders with DBs?
Hello,
Is there any way to hotbackup a rootenv with databases when there are subfolders with databases?
When I run a hotbackup (with db_hotbackup) on my rootenv, it only backups databases from the root of my rootenv. But, in that root directory, I have some subdirectories with databases too.
Thank you.Hi,
If you have root directory as : */your/root/dir*
and within that you have folders like : */your/root/dir/sub1* and */your/root/dir/sub2* and would want to backup the db files in */your/backup/dir* then, you should invoke db_hotbackup as
db_hotbackup -cv -b /your/backup/dir -h /your/root/dir -d ../dir/sub1 -d ../dir/sub2
Regards,
Debsubhra Roy -
Just installed iOS6, questions about "iMessage" and other things...
I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
Answer to question about "Error Occurring when convertion is tried for PDF to Word Document"
There are about ten questions about the "Error Occurring" when using Abode Reader XLto convert a PDF to a Word Doc, but no one has the answer? It has something to do with "signing in the wrong address". I have been working on this three days Now! Soimeone has the answer? Cataloochee
You must be kidding to say, "Adobe doesn't convert any version of Adobe Reader."' I must be in another world! When i move an Adobe Reader file pdf that goes to a wIndow that the top line says,'' Adobe reader X1 1001 Early Dutch History. pdf ". Then i click on the far left yellow marked icon that is used to move 1001 Early Dutch History.pdf to thye far right into a gray colored slot that reads "1001 Early Dutch History.pdf'. Under the file above or down below, the selected File for conversionis, a selection gray slot that ask if you want to convert this file(pdf) to a .docx.,.doc, tex. or Excell. After I make the selection and click onto Convert, a message comes into view where the word convert was that reads "An Error Occurred wilth Signing In OK" Even the use of another pdf file with a complete different address produces the same message. There are eight chapters in Dutch that I need to convert to word document by tommorrow or the class i teach "the Origin of Golf" will have to listen in Dutch and I can't speak Dutch. Cataloochee
-
Is IMessage free when messaging internationally?
Is iMessage free when texting internationally?
If you are on wifi then correct there will be no charge.
As for the settings in the iPhone I don;t have mine in front of me right now but turning off SMS should limit the messages to wifi. In addition you can also turn off doing any or most data transfers if you are not connected to wifi to limit what data goes over the 4g
regards -
Question about using email when using computer at internet cafe
I am confused about using email when using my computer at an internet cafe.
Of course - I use the internet cafe's wifi connection/network.
How does this effect my email?
what do I have to do to use my email when logged on at an internet cafe?zxcvbnm1 wrote:
I am confused about using email when using my computer at an internet cafe.
Of course - I use the internet cafe's wifi connection/network.
How does this effect my email?
what do I have to do to use my email when logged on at an internet cafe?
You don't give enough information to do more than discuss the issue in general terms.
You should be able to read your email wherever you can get an internet connection.
To send email, it depends on the email provider you are using. Gmail and other web based mail should not have any issues. However, if you are attempting to use an account that uses your ISP's mail servers, you will probably not be able to send mail. You may want to check with your ISP in that case, to see if they offer webmail.
Hope this may have answered your question. -
A question about CRL retrieval over HTTP
Hello
All<o:p></o:p>
Can
someone please help me with the following question<o:p></o:p>
At the moment I have a couple of Windows 2003 R2 Servers with Microsoft
Certificate Services installed (e.g. domain joined enterprise CA infrastructure). <o:p></o:p>
The CDP extension of issued certs contains both and LDAP path and HTTP path to retrieve the CRL
the HTTP path being the standard <o:p></o:p>
URL=http://<CAServer FQDN>/CertEnroll/ENTRootCA.crl<o:p></o:p>
and LDAP being the usual location in AD<o:p></o:p>
Now I need to turn off the 2003 R2 CA in the near future and want to be sure the
clients requesting a CRL can still obtain the CRL.<o:p></o:p>
The CARoot Cert is already distributed to all the workstations (as is the SubCA cert) to the usual containers.<o:p></o:p>
The LDAP Path comes first in the list of CRL locations in the CDP extension followed by the URL location.<o:p></o:p>
I know (believe) in general a UA (user agent i.e. WEB Browser) with check the list of CRL locations in turn and as long as it can reach one of them will be OK.<o:p></o:p>
I am OK on the Windows side of things but we also have a UNIX/Linux environment (like most companies) that also utilize certificates issued by the MS CA’s therefore their respective UG will
(or should that be might) check the CRL via
the CDP.<o:p></o:p>
If I turn off the CA then the HTTP path in the CDP will no longer be available (LDAP will still be available).<o:p></o:p>
I just want to check if there are any UG out on the network using HTTP to retrieve the CRL, so I was thinking about checking one or more logs on the CA for HTTP traffic regarding CRL retrieve.<o:p></o:p>
Questions<o:p></o:p>
Is CRL retrieval from the CA (via the default HTTP path) logged in any of the CA
Logs?
If so which logs?
If not logged by default can I turn up logging (i.e. I see there is a Debug option) and if so will this then log HTTP CRL retrieval requests (e.g. clients IP address making the http request)?<o:p></o:p>
I just want to check this in case some UNIX/Linux UG are not trying LDAP first or cannot retrieve via LDAP and therefore have to reply on Http before I turn on the CA <o:p></o:p>
Thanks
all in advance<o:p></o:p>
AAnotherUser__<o:p></o:p>
AAnotherUser__(same text, formatted better)
Hello All
Can someone please help me with the following question
At the moment I have a couple of Windows 2003 R2 Servers with Microsoft
Certificate Services installed (e.g. domain joined enterprise CA infrastructure).
The CDP extension of issued certs contains both and LDAP path and HTTP path to retrieve the CRL
the HTTP path being the standard
URL=http://<CAServer FQDN>/CertEnroll/ENTRootCA.crl
and LDAP being the usual location in AD
Now I need to turn off the 2003 R2 CA in the near future and want to be sure the
clients requesting a CRL can still obtain the CRL.
The CARoot Cert is already distributed to all the workstations (as is the SubCA cert) to the usual containers
The LDAP Path comes first in the list of CRL locations in the CDP extension followed by the URL location.
I know (believe) in general a UA (user agent i.e. WEB Browser) with check the list of CRL locations in turn and as long as it can reach one of them will be OK
I am OK on the Windows side of things but we also have a UNIX/Linux environment (like most companies) that also utilize certificates issued by the MS CA’s therefore their respective UG will
(or should that be might) check the CRL via
the CDP
If I turn off the CA then the HTTP path in the CDP will no longer be available (LDAP will still be available).
I just want to check if there are any UG out on the network using HTTP to retrieve the CRL, so I was thinking about checking one or more logs on the CA for HTTP traffic regarding CRL retrieve.
Questions
Is CRL retrieval from the CA (via the default HTTP path) logged in any of the CA
Logs?
If so which logs?
If not logged by default can I turn up logging (i.e. I see there is a Debug option) and if so will this then log HTTP CRL retrieval requests (e.g. clients IP address making the http request)?
I just want to check this in case some UNIX/Linux UG are not trying LDAP first or cannot retrieve via LDAP and therefore have to reply on Http before I turn on the CA
Thanks all in advance
AAnotherUser__
AAnotherUser__
Maybe you are looking for
-
First Upgrade -- http://www.corsair.com/memory-by-product-family/mac-memory-upgrades/corsair-mac- memory-8gb-dual-channel-ddr3-sodimm-memory-kit-cmsa8gx3m2a106c7.html Second upgrade -- http://www.corsair.com/corsair-mac-memory-16gb-dual-channel-ddr
-
Full outer join Bug or my misunderstanding?
CREATE GLOBAL TEMPORARY TABLE BP_ATTRIBUTE_CHARVAL_GTT ( "ATTRIBUTE_ID" NUMBER(10,0), "PARTNER_ID" NUMBER(10,0), "CHAR_VALUE" VARCHAR2(4000 BYTE), "LAST_UPDATE_DATE" DATE, "DISABLE_DATE" DATE ) ON COMMIT DEETE ROWS ; CRE
-
Qosmio F10: black screen at booting - No Toshiba screen
Help, my F10 is totally stuck and doesn't run anymore. After starting, the display stays black and the fan begins to run wildly, after a while the toshiba sound comes up but nothing else happens. No windows, nothing at all, only the wild running fan
-
hi experts, cud u plz tell me what is the significance of tc pa51 in my database it is showing dots (.),,can i calculate the attendance of a particular employee from here..plz help me...thnx in advance..its urgent...
-
My mac mini with 10.9.5 will not keep my monitor on the proper setting. I have to go into display settings and "detect monitor" again and again. How do I lock it in place? Does anyone know why the monitor detection keeps "slipping off". thank yo