Question about initial installation: WRT54GS

Greetings!
I am trying to install a WRT54GS... I have a Motorola SBV4200 Cable Modem (using RoadRunner) hooked into my desk-top PC...
Here's what I'm finding:
I plug everything in, and hit the "Secure Easy Setup" button on the Linksys, and then my laptop finds the signal, and everything's great - I get a super strong signal, and everything's hunky-dory.
A minute or two later, however, the laptop loses that signal, and switches over to a REALLY weak signal from outside somewhere.  The Linksys signal isn't even seen by the laptop. (i.e. - it's not on the "Available Wireless Network Connections" list)
So I started reading these boards, thinking that maybe I could find out what was going on... I thought that maybe RoadRunner has a dynamic IP Address, and that when it changed, the LinkSys and the laptop just weren't speaking anymore... So I followed everyone's reccommendations to go check the default IP  for the two...
Here's where the next problem occurs... I tried to go to 192.168.1.1, and of course I got to the Username/Password sign in... I left the Username empty, and used "admin" for the password...
Nothing...
Tried EVERYTHING - Admin, ADMIN, admin, Administrator, default, DEFAULT, tried putting stuff in for the username, EVERYTHING (or at least everyhting i could think of...
I tried resetting the LinkSys, and re-tried all those things again... Nuthin'
Does anyone out there have any ideas where to go next?  Like i said - it's frustrating because the thing works... for about a minute.
The nice thing is that the guy across the street is an IT guy for a HUGE company (one of the biggest in the state) - and he was stumped too!  So I know it's not just me...
HELP!?!
Thanks all -
Tom

Make sure you're hard-wired to the router when you try to access it's address.
Check also if all LEDs are lit up properly. Power LED should always be solid.
Check if the router's still giving you an IP address.

Similar Messages

  • Basic questions about JRE installation

    I am using NSIS to make a installer, which insalls the JRE 1.5, JMF, Javamp3, then our own software packages.....
    Firstly I have some basic question about the general installatio/deinstallation.
    1 Why sometimes is it required to reboot computer for the installed software to take effect, e.g.
    JRE 1.5. If not, what doest NOT take effect? (Actually in many cases, it seems to work even if not reboot the computer).
    Regarding the JRE 1.5,
    I am wondering:
    1 where is the registry entry written in windows?
    2 how to make the JRE installation process silent?
    Thanks !

    Just click on this link http://mindprod.com/jgloss/registry.html.

  • Some basic question about SCM Installation

    Hi Folks,
    Could you please advice me about some basic questions about SCM and its installation -
    Q1. Do I need to have an R/3 System to be able to practice OR demo the SCM system?
    Q2. If, yes, which version of SCM is compatible with the ECC 5.0?
    Q3. What are the basic requirements to install SCM (version compatible with ECC 5.0) and ECC on a oracle db and windows OS?
    Q4. Does SCM have APO and BI as an inbuilt functionality OR does the user need to purchase these as an Add-On?
    I know these are some basic questions, but these will help me give me a direction.
    With best wishes,
    Krishna

    Hello Krishna -
    Q1. Do I need to have an R/3 System to be able to practice OR demo the SCM system?
    ---> There are various Modules in SCM Like APO (Sub Modules  DP (stand alone), SNP Needs Master data from R/3 and has to pass on transactional Data to R/3, PPDS same as SNP, GATP same as SNP), ICH needs Data from R/3 to work with. Core Interface (CIF) connects R/3 to APO for transferring data.
    Q2. If, yes, which version of SCM is compatible with the ECC 5.0?
    -->For thorough understanding explore the following links
    http://help.sap.com/saphelp_scm41/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_scm50/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
    Q3. What are the basic requirements to install SCM (version compatible with ECC 5.0) and ECC on a oracle db and windows OS?
    -->Refer Above
    Q4. Does SCM have APO and BI as an inbuilt functionality OR does the user need to purchase these as an Add-On?
    --> APO comes with a small BI inbuilt functionality. you can only perform certain functions using that BI.
    Hope this helps.
    Regards,
    Suresh Garg

  • Basic Questions about Package Installation

    I have one basic question about installing packages.
    How can I find out if needed software is already installed without knowing the name of the package?
    For e.g. I want to know, if the MYSQL Server is already installed but I don't know the Package name.
    How can I find out the package name of needed software?

    Difficult.
    Assuming the string "MYSQL" appears somewhere in the package
    name or the package description, you can grep the output from
    "pkginfo". That is "pkginfo | grep -i sql" would list all installed
    packages that contain the substring "sql" with either upper- or
    lowercase letters.

  • A question about Tiger installation via firewire

    A friend of mine took her A1055 14.1" 1.33Ghz iBook G4 to someone to have a bad hard drive replaced.  Before he returned it, without asking her, he removed Tiger and installed Leopard on it.  Her base memory is only 256MB, storage 60GB so, as might be expected, once she reinstalled all the necessary apps she has to use in her line of work, her iBook became sludge.  It constantly freezes up; something it never did before he installed Leopard.  She can't afford, at this time, to move up to a MacBook, so she's asked me if I can help her get back to TIger.  (The guy who installed Leopard isn't interested in correcting things.) 
    This question, before I begin:  I don't have retail TIger disks (and she doesn't, either), but I do have the bundled disks that came with my old pet, an A1054 12" G4.  Both iBooks do have DVD drives, but, of course, these are bundled disks.  Should I be able to successfully skirt the "bundled" issue and install Tiger on her machine via firewire?  I plan to save her important files to a flash before I begin but, since she's running Leopard (if you can call what it's doing "running"...) I'll have to erase her hard drive.  I'm hesitant to do this, if someone here knows any reason my 12" bundled software won't work with her 14.1" iBook, even though it was running Tiger before.  Since I primarily use a MacBook, I'm a bit reckless when it comes to erasing my own iBook's hard drive, but I'm reluctant to do so to hers, if all I might potentially end up with is an empty iBook. 
    I've never been afraid to ask a stupid question; see how brave I am. 

    Getting around to answering the question about my own iBook:  the one I keep next to me is model is A1133.  Entering its serial number into this site confirms that TIger was its original OS, so those particular bundled disks are to be expected.  But my old A1054's serial number reveals, as you pointed out, that it's OS was 10.3.3.  This begs the question:  why, when I purchased it as a re-furb at my local Apple Store, several years ago, did it come all neatly boxed, not only with user manuals and stickers, but bundled Tiger disks?  I suppose "Apple re-furb" is the short answer, but the "bundled" part is a bit fuzzy. 
    Well, back to the original question, Ronda, regarding my friend's iBook and the fact that the guy who worked on it installed Leopard, without her consent:  Yesterday, I was mulling it over, and, remembering that her RAM was only 256, decided that, before I did anything else, I'd up her RAM to see if this helped Leopard run any better.  I pulled a 1 GB card from my "parts" iBook and popped it in.  I'm running it through its paces, today, to watch its behavior.
    If it continues to object to having Leopard as its OS, then would the bundled disks that came with my A1133 allow me to install Tiger onto her HD, via firewire, since its production year was more recent?  (I apologize that, at the time I originally posted, I'd not remembered that the A1133 also came with disks.  If you could see all the Macs stacked around this place, perhaps you could forgive that oversight.)

  • A question about the Installation process in general

    Hey guys, a general question to the installation process.
    The following scenario:
    I install a programme on my macbook pro and don't tick all possible installation options (like additional content).
    Afterwards I change my mind and want to install the optional content.
    So I run the installation programme again and now the question:
    If I install the additional content AND the mainprogramme again is the main programme going to be overwritten or am I going to have the mainprogramme twice on my system from now on
    Thanks in advance for you help, folks!

    If you do a Unicode conversion (no matter in a UC & CU scenario or as a single project) the target system must be empty - means, you will create a new database and load it with the content you exported.
    You can't install the export into your already existing database with the same name.
    Markus

  • A question about Maveric installer created on a USB key? Can this be used multiple times?

    I have downloaded Maveric on a Mac Book Pro.
    Then without installing utilising Diskmaker X as suggested using a USB key have created Maveric installer.
    My question is that I wish to know if the above created USB installer could be used in more than once to install Maveric?
    If I put that above created USB on a Mac Book Air and do the install, and could I use the same USB installer on a second Mac Book Air to install Maveric OS?
    This will help not needing to use broadband downloads where restrictions apply?
    Regards

    Thank you Lanny.
    That is great to know about Mavericks.
    Regards

  • Question about OS installation

    I have some problems with hot keys and I want to reformate my system.
    Problem is that I havent created recovery cd before, is it going to work if I do it now.
    thanks

    Hi
    Please dont worry about recovery procedure. It is very simple to do. Put recovery CD into CD/DVD drive, start the notebook and press down C button and keep it pressed for a few seconds. This will force your unit to boot up from CD/DVD drive.
    Follow the instruction on the screen. Standard mode will erase the whole HDD and create just one partition. If you have just one partition I recommend you to create two of them. The first one will be used for OS and application installations. The second one can be used for data saving.
    If you need more instructions please write again.

  • Question about initial size of a JComponent

    My project required drawing a fancy graph on a JComponent, which is then
    added to a panel on a frame with gridbag layout. The JComponent's
    paint() method relies on the size of the JComponent, or it's parent panel's size. The question is how to initialize the size of the component, as the preferred size of a JComponent is (0,0), and the panel's size can only be determined at run time. I already added component listener so that it resizes correctly when the frame is resized. But when the graph appears on the panel first time, it doesn't show itself according to the size of the panel. I have to manually resize the frame to make it fit.
    The following are code fragments:
    public class Graph extends JComponent
    int m_width;
    int m_height;
    public Graph()
    addComponentListener(new java.awt.event.ComponentAdapter()
    public void componentResized(ComponentEvent e)
    Dimension graph_size = getSize();
    m_width = graph_size.width;
    m_height = graph_size.height;
    // tried but failed
    // m_width = getPrefferedSize().width; m_height = ...
    // m_width = getSize().width; m_height = ...
    setSize(m_width, m_height); // how to initialize m_width, m_height?
    public void paint(Graphics g)
    m_width and m_height are frequently used here.

    Thanks for your reply Nancy,
    I understand the print resolution but I'm talking about on screen usage by browsers. I know that images are most optimized when the pixel resolution (number of pixels per side) is not more or less than the pixel resolution browsers display the image with. However with more and more monitors being produced with larger screens and denser ppi a lot of people, me included, zoom in with the browsers using Ctrl and Plus keys to see the content better. My monitor is displaying images not at approx 72 ppi but 110 ppi. This makes everything more than 30% smaller and although the text and images are much more sharper than monitors with less ppi, when things become too small they are hard to see regardless how sharp they are. For example this is how this page looks on my monitor at default view and full screen of the browser - the grey on the right is the background.
    Have in mind that on monitors with ppi less than 110 the image above will appear larger than on my monitor. The next image shows the rulers in Photoshop equal the size of real life rulers on my monitor while the inclosed image shows rulers that are equal to real size ruler on another guy's monitor with less ppi screen resolution.
    I'm not that much of a web developer but sometimes I design web pages in Photoshop and prepare images. So, based on my experience I'm thinking that more and more people would use browsers with zoomed in view at which case images with less pixels per side than the pixels of the monitor displaying them will look bad and I wonder if this can be avoided if the images are with larger resolution than the default view. Of course I realize that then at default view the images will not look as crisp as they could.

  • Really easy, but confusing question about SW installation.....

    Hello:
    I have a pc desktop (Win XP Home SP 2) and a new HP wireless laptop I want to connect with my new WRT54GS.
    Question.....When I open the box, it says "STOP - LOAD THE CD FIRST".
    Ok, fine. Load the cd where????? Desktop (wired to router), laptop, or both?????
    Thanks for answering a silly question.
    William Hollingsworth

    Is your PC going to be wired or wireless? Anyway, set-up CD usually does not work properly. Connect a PC directly to the modem and go to www.linksys.com/easy and run the EasyLink Connect Tool.

  • Getting iPhone on Wednesday.  Question about initial setup

    Hi,
    Tomorrow I should be receiving a reconditioned iPhone. The question I have is it possible to setup the iPhone and not have it copy all your address book from MS Outlook and your favorites from MS IE?
    I don't want to load it down with information that is not needed.
    Thanks,
    Al

    While you can avoid downloading all your contacts, you will find that the contacts take up about 1% of your 8GB. So I recommend installing the contacts and trying it out. You can always take them off at the next sync.
    I have over 2000 contacts by the way.

  • A few questions about the installation

    Hi,
    Our block of flats has just been upgraded to Infinity - I think it's likely to be FTTP as we have a fibre optic 'pullback' cable running around each floor outside the flats. 
    We have not yet been able to order the service but I have a few questions anyway. Apologies for the lengthy nature but my partner and I are trying to explore all options with regards to installation.
    As it's likely FTTP do we need to have the modem in the same place as the existing master socket. Reading this it seems that we could have the modem located in a different place and have some Cat5e/Cat6 cables run prior to installation to link the modem to the router (which would remain near the master socket). Is that something that's feasible?
    If we have to route the fibre cable through to the lounge, what lengths will the engineer go to in order to aid a discrete run? Can they do things like routing through drywall voids where accessible without structural work beyond drilling a hole? Ideally we would need to drill some holes anyway, are they happy doing more than just the one to bring the cable into the flat?
    If the engineer is not able to be overtly flexible, can additional cabling be left in a loop with a view to us conducting future work, things like burying the cable into the drywall? Can the cable even be moved once it's connected to the modem? Does moving the modem cost?
    Hopefully someone will be able to advise. It's been a long battle to get the infrastructure put into place and I'm looking forward to getting access to Infinity as soon as possible
    Thank you for any replies

    My understanding is that you don't even need a phone line for fibre therefore you don't need a master socket. That being the case, if you do have a phone line then master socket does not need to be anywhere near the fibre modem. You will find that usually you will have to have a phone line installed as part of the package.
    EDIT: You should run Ethernet cable from where the modem will be placed to where you want the homehub/router sited.

  • Newbie question about software installation

    I just bought my first mac, testing the waters. I downloaded apple remote desktop, and am unable to install this software. I work from home and VPN to our servers. I have always used a PC. The process goes through the installation until it gets to configuring installation. It gives error unable to install. I have os x tiger 10.4.5, 700 mhz G3. Help?

    Hi jasonss, and a warm welcome to the forums!
    Did you download the Client or the Admin and what version please?
    Have you seen these...
    http://www.external.ameslab.gov/is/remote-vpn-osx.html
    http://www.shiftmanager.net/~kurt/VTUNONOSX/VTUNonOSX.html
    http://www.equinux.com/us/products/vpntracker/index.html

  • A question about Oracle installer and a possible bug in JVM

    Hello,
    I appreciate if you could kindly guide me to solve the following problem.
    I'm trying to install Oracle11g Enterprise on a Linux system (Redhat Enterprise 5.3).
    There is no X system, and therefore I chose to install by using a response file
    in silent mode. I set the parameters value as indicated in Oracle installation
    guide. Yet, when I launch the installer, it seems that there is a problem with
    java:
    [oracle@ccsaplinux0002 database]$ ./runInstaller -responseFile /usr/local/oracle/database/responseFileV01.rsp -silent
    Starting Oracle Universal Installer...
    Checking Temp space: must be greater than 80 MB.   Actual 34517 MB    Passed
    Checking swap space: must be greater than 150 MB.   Actual 8189 MB    Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-08-10_06-53-41PM. Please wait ...[oracle@ccsaplinux0002 database]$ Oracle Universal Installer, Version 11.1.0.6.0 Production
    Copyright (C) 1999, 2007, Oracle. All rights reserved.
    # An unexpected error has been detected by HotSpot Virtual Machine:
    #  SIGSEGV (0xb) at pc=0xb7948692, pid=2854, tid=3086293200
    # Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
    # Problematic frame:
    # V  [libjvm.so+0x19c692]
    # An error report file with more information is saved as hs_err_pid2854.log
    # If you would like to submit a bug report, please visit:
    #   http://java.sun.com/webapps/bugreport/crash.jsp
    [oracle@ccsaplinux0002 database]$I looked in the oracle package that I downloaded, there was no jdk or jre direcotry.
    As a result I downloaded the JDK 1.6.0_15 available on Sun microsystem web site and then
    I set manually in oracle user ~/.bash_profile the value for $JAVA_HOME.
    Why I get this error?
    Thanks in advance,
    Dariush
    :)

    schavali wrote:
    >
    # An error report file with more information is saved as hs_err_pid2854.log
    >
    Can you post the contents of this error log ?
    HTH
    SriniHello there,
    Thanks for your attention to my problem. Here is the file:
    Kind Regards,
    Dariyoosh
    [root@ccsaplinux0002 oracle]# cat /tmp/hs_err_pid2854.log
    # An unexpected error has been detected by HotSpot Virtual Machine:
    #  SIGSEGV (0xb) at pc=0xb7948692, pid=2854, tid=3086293200
    # Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
    # Problematic frame:
    # V  [libjvm.so+0x19c692]
    ---------------  T H R E A D  ---------------
    Current thread (0x0805f5c0):  JavaThread "main" [_thread_in_vm, id=2854]
    siginfo:si_signo=11, si_errno=0, si_code=1, si_addr=0x00000000
    Registers:
    EAX=0x00000000, EBX=0xb7b3716c, ECX=0x000bfd68, EDX=0x00000001
    ESP=0xbfd68950, EBP=0xbfd689b4, ESI=0x0805f748, EDI=0xb7b49fa0
    EIP=0xb7948692, CR2=0x00000000, EFLAGS=0x00010286
    Top of Stack: (sp=0xbfd68950)
    0xbfd68950:   b7b3716c bfd68974 b79485e7 bfd68990
    0xbfd68960:   00000000 bfd68980 b7b3716c 0805f748
    0xbfd68970:   08060320 08060328 08060714 0805f5c0
    0xbfd68980:   bfd68994 0805f5c0 00000000 0805f5c0
    0xbfd68990:   bfd68a1c 00000000 08060730 0805f5c0
    0xbfd689a0:   08060774 08060774 aec60018 aec60018
    0xbfd689b0:   0805f680 bfd68a0c a371553b 0805f680
    0xbfd689c0:   00000000 00000000 aec60018 aec60018
    Instructions: (pc=0xb7948692)
    0xb7948682:   bc 8b 46 08 89 45 c0 8b 46 0c 89 45 c4 8b 45 0c
    0xb7948692:   8b 00 50 e8 f6 f3 fd ff 83 ec 0c 89 c7 50 e8 f3
    Stack: [0xbfb6e000,0xbfd6e000),  sp=0xbfd68950,  free space=2026k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    V  [libjvm.so+0x19c692]
    C  [liboraInstaller.so+0x453b]  Java_oracle_sysman_oii_oiip_osd_unix_OiipuUnixOps_chgrp+0x19
    j  oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.changeGroup(Ljava/lang/String;)Z+19
    j  oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.writeInvLoc(Loracle/sysman/oii/oiic/OiicSessionInterfaceManager;Ljava/lang/String;Ljava/lang/String;[Ljava/lang/String;)V+86
    j  oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(Loracle/sysman/oii/oiic/OiicSessionInterfaceManager;Ljava/lang/String;Ljava/lang/String;)V+42
    j  oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(Ljava/lang/String;Ljava/lang/String;)I+21
    j  oracle.sysman.oii.oiic.OiicSilentInterfaceManager.doInvSetupOperations(Ljava/lang/String;Ljava/lang/String;)I+3
    j  oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(Z)I+73
    j  oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(Z)I+249
    j  oracle.sysman.oii.oiic.OiicPullSession.doOperation(Z)I+11
    j  oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(Z)I+100
    j  oracle.sysman.oii.oiic.OiicInstaller.run()V+48
    j  oracle.sysman.oii.oiic.OiicInstaller.runInstaller([Ljava/lang/String;)I+107
    j  oracle.sysman.oii.oiic.OiicInstaller.main([Ljava/lang/String;)V+6
    v  ~StubRoutines::call_stub
    V  [libjvm.so+0x17ad8c]
    V  [libjvm.so+0x28efd8]
    V  [libjvm.so+0x17abbf]
    V  [libjvm.so+0x1a5472]
    V  [libjvm.so+0x196682]
    C  [java+0x1873]
    C  [libc.so.6+0x15e8c]  __libc_start_main+0xdc
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    j  oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.chgrp(Ljava/lang/String;Ljava/lang/String;)I+0
    j  oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.changeGroup(Ljava/lang/String;)Z+19
    j  oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.writeInvLoc(Loracle/sysman/oii/oiic/OiicSessionInterfaceManager;Ljava/lang/String;Ljava/lang/String;[Ljava/lang/String;)V+86
    j  oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(Loracle/sysman/oii/oiic/OiicSessionInterfaceManager;Ljava/lang/String;Ljava/lang/String;)V+42
    j  oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(Ljava/lang/String;Ljava/lang/String;)I+21
    j  oracle.sysman.oii.oiic.OiicSilentInterfaceManager.doInvSetupOperations(Ljava/lang/String;Ljava/lang/String;)I+3
    j  oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(Z)I+73
    j  oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(Z)I+249
    j  oracle.sysman.oii.oiic.OiicPullSession.doOperation(Z)I+11
    j  oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(Z)I+100
    j  oracle.sysman.oii.oiic.OiicInstaller.run()V+48
    j  oracle.sysman.oii.oiic.OiicInstaller.runInstaller([Ljava/lang/String;)I+107
    j  oracle.sysman.oii.oiic.OiicInstaller.main([Ljava/lang/String;)V+6
    v  ~StubRoutines::call_stub
    ---------------  P R O C E S S  ---------------
    Java Threads: ( => current thread )
      0x080cbc18 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2860]
      0x080ca708 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2859]
      0x080c9790 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=2858]
      0x080bfc08 JavaThread "Finalizer" daemon [_thread_blocked, id=2857]
      0x080bddc0 JavaThread "Reference Handler" daemon [_thread_blocked, id=2856]
    =>0x0805f5c0 JavaThread "main" [_thread_in_vm, id=2854]
    Other Threads:
      0x080bb0f0 VMThread [id=2855]
      0x080cd1e0 WatcherThread [id=2861]
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    def new generation   total 576K, used 458K [0xa5150000, 0xa51f0000, 0xa5cd0000)
      eden space 512K,  85% used [0xa5150000, 0xa51bdb50, 0xa51d0000)
      from space 64K,  29% used [0xa51d0000, 0xa51d4cb8, 0xa51e0000)
      to   space 64K,   0% used [0xa51e0000, 0xa51e0000, 0xa51f0000)
    tenured generation   total 1408K, used 1367K [0xa5cd0000, 0xa5e30000, 0xae750000)
       the space 1408K,  97% used [0xa5cd0000, 0xa5e25eb0, 0xa5e26000, 0xa5e30000)
    compacting perm gen  total 8192K, used 5575K [0xae750000, 0xaef50000, 0xb2750000)
       the space 8192K,  68% used [0xae750000, 0xaecc1ec0, 0xaecc2000, 0xaef50000)
    No shared spaces configured.
    Dynamic libraries:
    0078f000-007a9000 r-xp 00000000 03:01 10762034   /lib/ld-2.5.so
    007a9000-007aa000 r-xp 00019000 03:01 10762034   /lib/ld-2.5.so
    007aa000-007ab000 rwxp 0001a000 03:01 10762034   /lib/ld-2.5.so
    007ad000-008eb000 r-xp 00000000 03:01 10762035   /lib/libc-2.5.so
    008eb000-008ed000 r-xp 0013e000 03:01 10762035   /lib/libc-2.5.so
    008ed000-008ee000 rwxp 00140000 03:01 10762035   /lib/libc-2.5.so
    008ee000-008f1000 rwxp 00000000 00:00 0
    008f3000-008f5000 r-xp 00000000 03:01 10762039   /lib/libdl-2.5.so
    008f5000-008f6000 r-xp 00001000 03:01 10762039   /lib/libdl-2.5.so
    008f6000-008f7000 rwxp 00002000 03:01 10762039   /lib/libdl-2.5.so
    008f9000-0091e000 r-xp 00000000 03:01 10762037   /lib/libm-2.5.so
    0091e000-0091f000 r-xp 00024000 03:01 10762037   /lib/libm-2.5.so
    0091f000-00920000 rwxp 00025000 03:01 10762037   /lib/libm-2.5.so
    00922000-00935000 r-xp 00000000 03:01 10762038   /lib/libpthread-2.5.so
    00935000-00936000 r-xp 00012000 03:01 10762038   /lib/libpthread-2.5.so
    00936000-00937000 rwxp 00013000 03:01 10762038   /lib/libpthread-2.5.so
    00937000-00939000 rwxp 00000000 00:00 0
    00aac000-00abf000 r-xp 00000000 03:01 10762054   /lib/libnsl-2.5.so
    00abf000-00ac0000 r-xp 00012000 03:01 10762054   /lib/libnsl-2.5.so
    00ac0000-00ac1000 rwxp 00013000 03:01 10762054   /lib/libnsl-2.5.so
    00ac1000-00ac3000 rwxp 00000000 00:00 0
    08048000-08057000 r-xp 00000000 03:01 1145290    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/bin/java
    08057000-08059000 rwxp 0000e000 03:01 1145290    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/bin/java
    08059000-0861c000 rwxp 00000000 00:00 0          [heap]
    a3711000-a371b000 r-xp 00000000 03:01 1145413    /tmp/OraInstall2009-08-10_06-53-41PM/oui/lib/linux/liboraInstaller.so
    a371b000-a371d000 rwxp 00009000 03:01 1145413    /tmp/OraInstall2009-08-10_06-53-41PM/oui/lib/linux/liboraInstaller.so
    a371d000-a37f4000 r-xs 00000000 03:01 1145388    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/srvm.jar
    a37f4000-a387e000 r-xs 00000000 03:01 1145387    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/xml.jar
    a387e000-a3884000 r-xs 00000000 03:01 1145386    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/ojmisc.jar
    a3884000-a3899000 r-xs 00000000 03:01 1145385    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/orai18n-mapping.jar
    a3899000-a399d000 r-xs 00000000 03:01 1145384    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/orai18n-collation.jar
    a399d000-a39da000 r-xs 00000000 03:01 1145366    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/jewt4-nls.jar
    a39da000-a3be7000 r-xs 00000000 03:01 1145365    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/jewt4.jar
    a3be7000-a3d05000 r-xs 00000000 03:01 1145383    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/classes12.jar
    a3d05000-a3d0d000 r-xs 00000000 03:01 1145381    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/swingaccess.jar
    a3d0d000-a3d5a000 r-xs 00000000 03:01 1145364    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/ewt3-nls.jar
    a3d5a000-a3d60000 r-xs 00000000 03:01 1145382    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/ewt3-swingaccess.jar
    a3d60000-a3f28000 r-xs 00000000 03:01 1145363    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/ewt3.jar
    a3f28000-a3f4f000 r-xs 00000000 03:01 1145368    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/help4-nls.jar
    a3f4f000-a3fc3000 r-xs 00000000 03:01 1145367    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/help4.jar
    a3fc3000-a4078000 r-xs 00000000 03:01 1145380    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/oracle_ice.jar
    a4078000-a409b000 r-xs 00000000 03:01 1145378    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/InstHelp_zh_TW.jar
    a409b000-a40be000 r-xs 00000000 03:01 1145377    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/InstHelp_zh_CN.jar
    a40be000-a40e1000 r-xs 00000000 03:01 1145376    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/InstHelp_pt_BR.jar
    a40e1000-a4103000 r-xs 00000000 03:01 1145375    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/InstHelp_ko.jar
    a4103000-a4124000 r-xs 00000000 03:01 1145374    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/InstHelp_ja.jar
    a4124000-a4146000 r-xs 00000000 03:01 1145373    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/InstHelp_it.jar
    a4146000-a416a000 r-xs 00000000 03:01 1145372    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/InstHelp_fr.jar
    a416a000-a418c000 r-xs 00000000 03:01 1145371    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/InstHelp_es.jar
    a418c000-a41b0000 r-xs 00000000 03:01 1145370    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/InstHelp_de.jar
    a41b0000-a41d0000 r-xs 00000000 03:01 1145369    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/InstHelp.jar
    a41d0000-a41f1000 r-xs 00000000 03:01 1145379    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/InstImages.jar
    a41f1000-a422b000 r-xs 00000000 03:01 1145432    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/http_client.jar
    a422b000-a4266000 r-xs 00000000 03:01 1145389    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/remoteinterfaces.jar
    a4266000-a4271000 r-xs 00000000 03:01 1145390    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/ssh.jar
    a4271000-a429c000 r-xs 00000000 03:01 1145391    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/jsch.jar
    a429c000-a42e5000 r-xs 00000000 03:01 1145427    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/OraPrereq.jar
    a42e5000-a43c6000 r-xs 00000000 03:01 1145425    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/emCfg.jar
    a43c6000-a43c8000 r-xs 00000000 03:01 1145429    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/OraInstallerNet.jar
    a43c8000-a43d6000 r-xs 00000000 03:01 1145430    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/share.jar
    a43d6000-a4534000 r-xs 00000000 03:01 1145426    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/xmlparserv2.jar
    a4534000-a454e000 r-xs 00000000 03:01 1145424    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/oneclick.jar
    a454e000-a4967000 r-xs 00000000 03:01 1145428    /tmp/OraInstall2009-08-10_06-53-41PM/oui/jlib/OraInstaller.jar
    a4967000-a497c000 r-xs 00000000 03:01 1177352    /tmp/OraInstall2009-08-10_06-53-41PM/ext/jlib/orai18n-mapping.jar
    a497c000-a49df000 r-xs 00000000 03:01 1177351    /tmp/OraInstall2009-08-10_06-53-41PM/ext/jlib/orai18n-utility.jar
    a49df000-a4a06000 r-xs 00000000 03:01 1145126    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/ext/sunjce_provider.jar
    a4a06000-a4acb000 r-xs 00000000 03:01 1145125    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/ext/localedata.jar
    a4acb000-a4af6000 r-xs 00000000 03:01 1145127    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/ext/sunpkcs11.jar
    a4af6000-a4af7000 ---p 00000000 00:00 0
    a4af7000-a4b77000 rwxp 00000000 00:00 0
    a4b77000-a4b7a000 ---p 00000000 00:00 0
    a4b7a000-a4bf8000 rwxp 00000000 00:00 0
    a4bf8000-a4bfb000 ---p 00000000 00:00 0
    a4bfb000-a4c79000 rwxp 00000000 00:00 0
    a4c79000-a4c7c000 ---p 00000000 00:00 0
    a4c7c000-a4cfa000 rwxp 00000000 00:00 0
    a4cfa000-a4efa000 r-xp 00000000 03:01 10994471   /usr/lib/locale/locale-archive
    a4efa000-a4efd000 ---p 00000000 00:00 0
    a4efd000-a4f7b000 rwxp 00000000 00:00 0
    a4f7b000-a4f7e000 ---p 00000000 00:00 0
    a4f7e000-a4ffc000 rwxp 00000000 00:00 0
    a4ffc000-a4ffd000 ---p 00000000 00:00 0
    a4ffd000-a5082000 rwxp 00000000 00:00 0
    a5082000-a509e000 rwxp 00000000 00:00 0
    a509e000-a509f000 rwxp 00000000 00:00 0
    a509f000-a50e4000 rwxp 00000000 00:00 0
    a50e4000-a50e5000 rwxp 00000000 00:00 0
    a50e5000-a50e9000 rwxp 00000000 00:00 0
    a50e9000-a50eb000 rwxp 00000000 00:00 0
    a50eb000-a512f000 rwxp 00000000 00:00 0
    a512f000-a5133000 rwxp 00000000 00:00 0
    a5133000-a514f000 rwxp 00000000 00:00 0
    a514f000-a51f0000 rwxp 00000000 00:00 0
    a51f0000-a5cd0000 rwxp 00000000 00:00 0
    a5cd0000-a5e30000 rwxp 00000000 00:00 0
    a5e30000-ae750000 rwxp 00000000 00:00 0
    ae750000-aef50000 rwxp 00000000 00:00 0
    aef50000-b2750000 rwxp 00000000 00:00 0
    b2756000-b275a000 rwxp 00000000 00:00 0
    b275a000-b27d6000 rwxp 00000000 00:00 0
    b27d6000-b28b6000 rwxp 00000000 00:00 0
    b28b6000-b47d6000 rwxp 00000000 00:00 0
    b47d6000-b5045000 r-xs 00000000 03:01 1112048    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/charsets.jar
    b5045000-b505a000 r-xs 00000000 03:01 1112076    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/jce.jar
    b505a000-b50df000 r-xs 00000000 03:01 1112077    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/jsse.jar
    b50df000-b5148000 rwxp 00000000 00:00 0
    b5148000-b7757000 r-xs 00000000 03:01 1112084    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/rt.jar
    b7757000-b7766000 r-xp 00000000 03:01 1145170    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/i386/libzip.so
    b7766000-b7768000 rwxp 0000e000 03:01 1145170    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/i386/libzip.so
    b7768000-b7789000 r-xp 00000000 03:01 1145150    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/i386/libjava.so
    b7789000-b778b000 rwxp 00020000 03:01 1145150    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/i386/libjava.so
    b778b000-b7796000 r-xp 00000000 03:01 1145169    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/i386/libverify.so
    b7796000-b7797000 rwxp 0000b000 03:01 1145169    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/i386/libverify.so
    b7797000-b77a0000 r-xp 00000000 03:01 10759656   /lib/libnss_files-2.5.so
    b77a0000-b77a1000 r-xp 00008000 03:01 10759656   /lib/libnss_files-2.5.so
    b77a1000-b77a2000 rwxp 00009000 03:01 10759656   /lib/libnss_files-2.5.so
    b77a2000-b77a4000 r-xs 00000000 03:01 1145124    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/ext/dnsns.jar
    b77a4000-b77ac000 rwxs 00000000 03:01 1014834    /tmp/hsperfdata_oracle/2854
    b77ac000-b7b1c000 r-xp 00000000 03:01 1145177    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/i386/client/libjvm.so
    b7b1c000-b7b3a000 rwxp 00370000 03:01 1145177    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/i386/client/libjvm.so
    b7b3a000-b7f52000 rwxp 00000000 00:00 0
    b7f53000-b7f59000 r-xp 00000000 03:01 1145187    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/i386/native_threads/libhpi.so
    b7f59000-b7f5a000 rwxp 00006000 03:01 1145187    /tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/i386/native_threads/libhpi.so
    b7f5a000-b7f5b000 rwxp 00000000 00:00 0
    b7f5b000-b7f5c000 r-xp 00000000 00:00 0
    b7f5c000-b7f5d000 rwxp 00000000 00:00 0
    b7f5d000-b7f5e000 r-xp 00000000 00:00 0          [vdso]
    bfb6e000-bfb71000 ---p 00000000 00:00 0
    bfb71000-bfd6e000 rwxp 00000000 00:00 0          [stack]
    VM Arguments:
    jvm_args: -Doracle.installer.library_loc=/tmp/OraInstall2009-08-10_06-53-41PM/oui/lib/linux -Doracle.installer.oui_loc=/tmp/OraInstall2009-08-10_06-53-41PM/oui -Doracle.installer.bootstrap=TRUE -Doracle.installer.startup_location=/usr/local/oracle/database/install -Doracle.installer.jre_loc=/tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre -Doracle.installer.nlsEnabled="TRUE" -Doracle.installer.prereqConfigLoc=  -Doracle.installer.unixVersion=2.6.30.4-09-AUG-2009-V02 -Xmx150m
    java_command: oracle.sysman.oii.oiic.OiicInstaller -scratchPath /tmp/OraInstall2009-08-10_06-53-41PM -sourceLoc /usr/local/oracle/database/install/../stage/products.xml -sourceType network -timestamp 2009-08-10_06-53-41PM -responseFile /usr/local/oracle/database/responseFileV01.rsp -silent
    Launcher Type: SUN_STANDARD
    Environment Variables:
    JAVA_HOME=
    CLASSPATH=
    PATH=/usr/bin:/usr/ccs/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:/usr/local/oracle/app/oracle/product/11.1.0/db_1/bin:/usr/local/java/jdk1.6.0_15/bin:/home/oracle/bin:/usr/local/oracle/app/oracle/product/11.1.0/db_1/bin:/usr/local/java/jdk1.6.0_15/bin:/usr/local/oracle/database/install
    LD_LIBRARY_PATH=/tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/i386/client:/tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/lib/i386:/tmp/OraInstall2009-08-10_06-53-41PM/jdk/jre/../lib/i386
    SHELL=/bin/bash
    Signal Handlers:
    SIGSEGV: [libjvm.so+0x32a000], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGBUS: [libjvm.so+0x32a000], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGFPE: [libjvm.so+0x28e010], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGPIPE: [libjvm.so+0x28e010], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGILL: [libjvm.so+0x28e010], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
    SIGUSR2: [libjvm.so+0x290460], sa_mask[0]=0x00000000, sa_flags=0x10000004
    SIGHUP: [libjvm.so+0x28fe90], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGINT: [libjvm.so+0x28fe90], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGQUIT: [libjvm.so+0x28fe90], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    SIGTERM: [libjvm.so+0x28fe90], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
    ---------------  S Y S T E M  ---------------
    OS:Red Hat Enterprise Linux Server release 5.3 (Tikanga)
    uname:Linux 2.6.30.4-09-AUG-2009-V02 #1 SMP Sun Aug 9 19:19:38 CEST 2009 i686
    libc:glibc 2.5 NPTL 2.5
    rlimit: STACK 8192k, CORE 0k, NPROC 2047, NOFILE 65536, AS infinity
    load average:0.12 0.03 0.01
    CPU:total 1 (cores per cpu 1, threads per core 1) family 6 model 15 stepping 11, cmov, cx8, fxsr, mmx, sse, sse2
    Memory: 4k page, physical 1137164k(322240k free), swap 2047k(2047k free)
    vm_info: Java HotSpot(TM) Client VM (1.5.0_11-b03) for linux-x86, built on Dec 15 2006 02:25:41 by java_re with gcc 3.2.1-7a (J2SE release)
    [root@ccsaplinux0002 oracle]#

  • Question about OAS Installation!

    Hi,everybody:
    I encounted a problem when I intended to install OAS4.0 to Solaris Server2.7. The problem is when I tried to execute that "runInstaller",failed.And the error message is :"The JAVA RunTime Enviroment was not found at bin/jre." And ask me to install JRE Version 1.1.7 or higher. But it is true that I've already installed such JRE and there is such bin/jre file in my directory.And I also include the path into .profiles.I don't know why?
    If U know,pls help me.I've been working on it over a week!
    Linas

    then will probably change master socket to new SSPF MK3 but will need to make changes at your extenal master.  getting data extension fitted to have connection socket other than at master socket will depend on whether you get openreach or a contractor.  openreach should be ok but contractor is usually install master, check working and off  there is no way to tell until engineer turns up - hopefully for what you want it is openreach
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Maybe you are looking for