Question about integration of STS and BPS

Hi gurus,
I want to realize following functionality:
after the status of my sales plan set to "approved",I can run my later process of my sales plan(another BPS web application),otherwise ,the later BPS web application can NOT be run(I can let some BPS web application not run),but I can't catched the "approved" status to my BPS0 variable or set the status into my cube . How can I do that?
thank you experts very much!

Hi Denny,
Could be done in a simple FOX also, logic as below
For the Condition....
Flag = 1
End For
Include the FOX in the Planning sequence at the appropriate step
subsequently filter out in the Parameter group to process records only whose flag value is 1
Assigning appropriate points is the way of saying thanks at SDN *

Similar Messages

HT201263 What will i do?screenshot There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, cli

What will i do? ITune screenshot is as follows >
There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

Do what it said to do.
"Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. "

TS1814 There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

There is a problem with your iPhone.
Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
To find your nearest Apple Store, click here.
Please help me i can aktivate my phone imei 012423006333181.

There is a problem with your iPhone.
Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
To find your nearest Apple Store
no imei also

Questions about Integrated Planning and BPS

Hi all,
I'm testing the functions of BW7.0. And at the point of comparing the new BI Integrated Planning from the BPS, I'm stuck with 3 problems. Can anybody give me some solution?
i. When using the input-ready layout of the BW-BPS 3.5, I was able to create a new record and load it up to the cube. Is it possible to make the same operation like this using the BI Integrated Planning of BW7.0?
ii. When using the BW-BPS 3.5, showing the character hierarchy on the Manual planning layout can be chosen. And I'd like to show the BPS Characteristic Hierarchies in BI Integrated Planning of BW7.0 like it is in the BW-BPS 3.5. Is it possible to show the hierarchy in similar type somehow? If not,can't I show the sum of it anyhow? And if possible,can you also show the sum of the each hierarchy and change the data?
iii. When showing the Characteristic combination data, can you choose how to show them from the transaction data or from all the combination like it was possible in the BW-BPS 3.5?
Kind regards,
Hiroshi Iwanaga

Dear Beat,
Thanks for your help.
The information you gave me made a lot of help.
Can I ask you more about the first question?
About getting new lines in the table web item,as you have told me, I have set the parameter NEW_LINES_COUNT as 20 in the table web item. But when I execute it,no lines shows up. Is this a program error or am I setting the parameter in a wrong place?
And this getting new lines feature, is it also possible when using a workbook?
Thanks in advance,
Hiroshi Iwanaga

Some random questions about integration features

Greetings,
after working for a few weeks with Autovue's ISDK (web server) and having some sucess with its integration with our custom CMS, I have a few random questions about what can be done and what can't be done. So, instead of opening many new threads, I'll post them here together.
1) Translation. We are localised in Russia, and its translation is incomplete. I have found a tra_en.properties file in AutoVue/bin, and a description about how to create a properties file for custom actions. But no information about how to translate to other languages - and russian translation appears to be packed within the jar of the applet. Is there a clean way to translate, or refine the current translation, so we don't get a mix of russian and english commands in the applet? Because my tries using EXTRABUNDLES have failed, as I don't want to add a bundle for extra actions, but to replace it for existing ones.
2) Attachments in markups. Markups allow to attach other files, but since our CMS is custom, we only get the option to attach files from our local drives. We did no browse integration with the CMS, as people with different levels of permission will have different access to files there, and we considered unnecessary to provide that level of integration. We are considering to remove this action from the GUI, but before that I'd like to evaluate how hard would it be to generate an upload file action, so the attached file would be stored in the custom CMS and linked to it so the whole thing worked. My guess is "it will be hard and time consuming", so for now, we are considering to delete this feature in our integration.
3) Is there a way to resize the Open markup dialog? We have several properties displayed, and fit well within a standard screen, but the dialog is small and you have to scroll the table to see all properties.
Thanks for any assistance with these issues

As always, thanks for the fast answer, Artash.
Yes, now I see attachments are stored inside the markup file. The problem is, when I open markup mode for the attachment, since the attachment uses some kind of default access method, my url's from the integration with the background CMS are broken completely. I believe the ideal state here would be to make some kind of inner markup for the attachment, maybe stored within the original markup file along the attached file. Or maybe it works that way, and I need to access it with the default gui action instead of my custom one. If that is the case, is there any way to tell the gui file how to differentiate a standard opened file from an attached one? If so, the issue has solution. If not... Well, then maybe something escapes me.
Edited by: Jordi Bosch on Apr 6, 2012 12:27 AM

Some questions about Unity 4.0 and IPC

I have a couple of questions and I was looking for "real world" answers, not specific answers from the design guide.
1.What is this bandwidth requirement between Exchange and Unity and what is it used for?
2. What sort of issues would we experience if we placed the Unity UM Server at the Colo and placed the Exchange server at the customer premise; with a single T1 between the sites?
3.What else is involved with a Unity UM install vs. a Unity VM install?
4.Does the Unity UM and Exchange servers have to be running AD?
5. Can Unity or the Exchange box be the Domain Controller? Or does it need to be a separate server?
6. Where does a vm message get streamed from? The Unity server or the Exchange server?

No you do not pay for FaceTime. It uses your WiFi network, so if you have access to WiFi it is free.
There is no server required for FaceTime, it will use a direct device to device protocol.
I can't answer the question about using phones in different countries as that will depend on if you buy a phone that is locked to a carrier.
If you buy a phone in Germany and it is locked to a German phone network then it will most likely not work with a SIM from Turkey. You would need to buy an unlocked phone which are very expensive as they do not have any carrier subsidy applied to the price.

Question about using 10g/11g and APEX ...

Hi,
I just recently learned of Oracle's APEX and have a few questions about using it.
Can I use APEX with express, standard, and enterprise editions of 10g and 11g?
Are all of these free to use?

You might want to read about APEX rather than jumping into questions that are reasonably well documented. Info at http://www.oracle.com/technology/products/database/application_express/index.html
Your specific questions:
1) Apex is a package that can be installed into any properly licensed database.
2) The price for the production license of the database varies by edition.
The price for Express Edition is $0 for use in production. Part of the cost for that edition is 'no Oracle Support based support, no patches, data volume limitation, etc.'

Questions about JVC GZ HD7 and Final Cut

i'm planning to buy a JVC GZ HD7, but i have some questions about it...
My imac configuration is
Imac 20" late 2006
1 Gb Ram
Leopard 10.5.2
Final Cut Studio 2
Ok
So my questions are:
1- When shooting the best setting for me is the 1440cbr, or 1920x1080
is better? i would like to have progressive instead of interlaced
moviefiles, but for what i have read the JVC HD7 only shoots interlaced...is possible to turn them into progressive after working in final cut?
2- In Final Cut Pro what are the sequence settings and the video
settings for a video shoot from this camera?
I would like to know the best settings possible for me,
regarding that i would like to edit in real time, no rendering needed,
and to have the best image quality that this camera can offer...

FCE is designed to work with DV/HDV files. It cannot work natively with MPEG2 files. You will need something like MPEG Streamclip to convert your files to a format that FCE understands
Streamclip is free but you need to buy Apple's MPEG Playback Component to make it work

Techie Question about iWeb, outbound links, and Google Analytics

Hi,
I have a kind of pretty technical question about using Google Analytics (GA) with iWeb sites to measure clicks on outbound links. Here's the setup:
1) My website's online, and GA is working properly.
2) I don't sell stuff directly, but I do have a "Purchase" page which contains a link to a specific Amazon page.
3) I'm pretty sure I can measure how many people go to the Purchase page using GA, but how do I measure whether visitors click on the Amazon link? It would be interesting to me to be able to gauge what the conversion rate is; that is, how many people actually proceed to purchase the product at Amazon.
I've checked the GA instructions and there's a page about manually tracking clicks on outbound links but it requires some code inputting. I know zero about coding, but I'm pretty sure that in iWeb you can't get access to the source code to input the required code.
Am I wrong about this? And if I am, then does anyone here know how to measure the clickthrough rate?
Anyway, hope you can help. Thanks in advance.

I don't know about the link tracking but you could have the link take you to a redirect page which automatically sends them to Amazon.com after a preset time, 0 seconds to whatever you'd like. You can put a counter on that redirect page, like StatCounter. StatCounter can tell you how many, from where they came, i.e country and area, repeat visits, etc.
Tutorials #12 & #13 describe how to put a visible counter on a page but with a redirect page you wouldn't have to bother since it wouldn't be seen. You can get all of your information from your account on the StatCounter site.
The redirect page would be a simple plain text page titled redirect.html and would look like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="refresh"
content="0; Destination URL">
<title>Redirecting or whatever you'd like to appear at the top of the browser</title>
</head>
<body>
</body>
</html>
0 Is the number of seconds to wait before redirecting the visitor. If set to zero the visitor would not know they were being redirected. Replace Destination URL with the Amazon URL you want them to go to.
OT

I just have questions about the AirPort Express and how it works.

My household Wi-Fi is not the strongest in my room and I found out about the AirPort Express and I read the overvie, but I still have some questions on how it works, how its setup and other questions as well.

The AirPort Express will not wirelessly extend the signal from another router unless that router is also an Apple product.
Not sure what other questions you might have, but we'll try to answer if you want to ask.

About integration between SAP and non-SAP applications via javaidoc classes

Hi,All
Now we are implementing a SAP-Retail project,we encounter a problem of integration between SAP and non-SAP applications(POS),we want to set Inbound/Outbound between SAP and POS applications realtimely,POS can connect to the SAP system via VPN,weather it can be implemented?
I conceive to implement it with SAP Java Connector IDoc Class,I don't know weather it is the best solution?If not,please give some other proposal.
I have download the classes from SAP website and try it with the samples provided by SAP(JCoIDocSample1.java/JCoIDocSample3.java),In my testing,Inbound is succeed,but,in SAP-Retail IS,standard Outbound message type is defined via file port,some one told me that SAP Java Connector IDoc Class can only receive idocs from tRFC port?is it true?If not,please tell me how to deploy in SAP so java program can receive idocs from file port?

We too are interested in finding information on integration between SAP and Intergraph. Were you able to obtain information and I was wondering if could share this with us.
Thanks,
Sue
City of Edmonton

About integration between hr and mm

hai sap friends,
As per my knowledge integration between Hr and mm
the transaction code is "oowiz5" and "oomm"
that means if Training and Event management is implemented, integration happens otherwise
In any way any scenaio plz
thanks in advance
madhu

Apart from Travel MMis integrated with Time Management
Valuating work performed by external employees, and monitoring them in Purchasing

Question about suitability of iPhone and specific comparisons

I like the Verizon network (for which I'm considering upgrading to the Omnia II) but am thinking about biting the bullet and going to AT&T for the iPhone. I use Macs at home and at work. My main uses will be phonecalls (with reliable voice dialing from my car - bluetooth stereo and earpiece), mail (Exchange server access for calendar, mail, and addressbook), internet through the cellphone network (not wifi) - browsing, SFTP, VNC, etc., watching videos, photos, and listening to music, calendar reminders (as well as periodic sound reminders for missed calls, voicemails, etc.), opening PDF and Word documents, GPS (ideally with spoken driving directions),and Skype. Given these uses, can anyone advise me if there's anything here that is a problem for the iPhone?
thanks,
Mike

"VNC"
There are pretty nice VNC clients for the platform, the best being Jaadu VNC. (See my just-published "Everything you will ever want to know about the remote desktop controllers on the iPhone" for more info if interested; it's been cross-posted to several iPhone forums. Not this one - yet - as I still don't have Level 1.)
watching videos
The 3G S (but not the 3G!) is far better than current for example Windows Mobile or Symbian phones in that it can play back MPEG-4 / H.264 videos without excessive power consumption. That is, if all your videos are in this format, the 3G S is the way to go.
Nevertheless, if your videos are in DivX, XviD or - even worse - WMV, you won't be able to natively play them back - you'll need to transcode them first.
This, unfortunately, also means WMV streaming TV stations are far harder to watch than on, say, Windows Mobile. The only AppStore app ("Streamer") supporting them is really bad and delivers dismal performance, even on the 3G S.

A question about CPS (CPS processing) and CAPolicy.inf file.

Hello All
Can someone please help me with the following question.
Background, I am building a 3-tier PKI infrastructure. offline Root, offline Policy (intermediate), online issuing.
Now my first question is about CPS (certificate practice statement) for this example lets just call this the InternalIssuancePolicy as below.
Basically I was thinking it is best not to set a given certificate (aka issuance) policy at the Root, the reason being I may wish to have different issuance policies at a latter date.
For example right now I just want an issuance policy (CPS) for internal certificates only, therefore I am thinking set this at the Policy CA level, as below [InternalIssuancePolicy] (example OID) and then issuing CA certs from this Policy CA to the
internal issuing CAs. If at a latter date I want a different policy (CPS) for issuance of external certificates I can build a new Policy CA under the existing Root with a different policy extension.
Is the above logic sound?
Questions:
I am assuming from recent study that the CA cert issued to the Issuing CA will contain a single issuance policy "only" i.e. the one that was specified in the Policy CA 1.3.6.1.4.11111111.1.1.1. If so I believe you cannot build a new
issuing CA and submit the CSR to the Policy CA asking for a CA cert with any other certificate policy extension other than 1.3.6.1.4.11111111.1.1.1
Is that correct?
Also
I saw a blog post which stated if are going to use certificate/issuance policies (other than all issuance policies) you should mark the extension as critical=true otherwise the policy just becomes glorified comment. I take the point but that leads me to
two more questions
1: How does the certificate changing engine or CryptoAPI enforce a certificate policy (as it is just a policy, e.g. written procedure). I am assuming all this means is it forces the client to process the extension and therefore check the certificate
policy extension in the certificate does not violate the certificate chain but that is all it can do?
2: If the certificate policy extension is set to critical and the URL referenced in the extension is not available (e.g. on a WEB Server and the client is working offline, but has a cached CRL), does setting the extension to critical also force the
client to try and access the URL listed, or not (I am assuming not as you could just have a text block rather than URL).
Any comments suggestions on my proposed three CAPolicy.inf files below for the 3-tier PKI (again offline Root and Policy)
** Root **
[Version]
Signature= "$Windows NT$"
[Certsrv_Server]
RenewalKeyLength=4096
RenewalValidityPeriodUnits=Years
RenewalValidityPeriod=20
CRLPeriod=Years
CRLPeriodUnits=1
LoadDefaultTemplates=False
AlternateSignatureAlgorithm=0
[CRLDistributionPoint]
[AuthorityInformationAccess]
basicconstraintsextension]
pathlength = 2
critical=true
PolicyStatementExtension]
Policies = AllIssuancePolicy
Critical = FALSE
[AllIssuancePolicy]
OID = 2.5.29.32.0
** Policy CA **
[Version]
Signature= "$Windows NT$"
[Certsrv_Server]
RenewalKeyLength=2048
RenewalValidityPeriodUnits=Years
RenewalValidityPeriod=10
CRLPeriod=Years
CRLPeriodUnits=1
[PolicyStatementExtension]
Policies = InternalIssuancePolicy
Critical = False
[InternalIssuancePolicy]
OID = 1.3.6.1.4.11111111.1.1.1
Notice = "Internal Certificate Policy"
URL="http://pki.lab.local/Certenroll/CPS.txt"
[AuthorityInformationAccess]
URL=http://pki.lab.local/Certenroll/PolicyCA01.crt
[CRLDistributionPoint]
URL=http://pki.lab.local/Certenroll/PolicyCA01.crl
[basicconstraintsextension]
pathlength = 1
critical=true
** Issuing CA **
[Version]
Signature= "$Windows NT$"
[Certsrv_Server]
RenewalKeyLength=2048
RenewalValidityPeriodUnits=Years
RenewalValidityPeriod=5
CRLPeriod=Weeks
CRLPeriodUnits=1
CRLDeltaPeriod=Days
CRLDeltaPeriodUnits=1
LoadDefaultTemplates=False
AlternateSignatureAlgorithm=0
[AuthorityInformationAccess]
URL=http://pki.lab.local/Certenroll/IssuingCA01.crt
[CRLDistributionPoint]
URL=http://pki.lab.local/Certenroll/IssuingCA01.crl
[basicconstraintsextension]
pathlength = 0
critical=true
Thanks All
AAnotherUser__

> Is the above logic sound?
not that much. In this case 3-tier PKI could be reduced to 2-tier. Make default Offline Root CA and below it issuing CAs with desired policy OIDs. You will combine issuing CA with policy CA functionality. Additional tier will cost you a license, administration
overhead and increased certificate chain processing delays. There is nothing wrong if you combine policy CAs with issuing.
> I saw a blog post which stated if are going to use certificate/issuance policies (other than all issuance policies) you should mark the extension as critical=true
where did you get this? Certificate policies should not be marked critical. Certificate chaining engine will take care of it, when application reqests CCE to validate desired policy.
> does setting the extension to critical also force the client to try and access the URL listed
no. Certificate chaining engine do not inspect policy qualifier URLs.
> Any comments suggestions on my proposed three CAPolicy.inf files below for the 3-tier PKI (again offline Root and Policy)
[CRLDistributionPoint]
[AuthorityInformationAccess]
[PolicyStatementExtension]
Policies = AllIssuancePolicy
Critical = FALSE
[AllIssuancePolicy]
OID = 2.5.29.32.0
these sections are not required in root CA.
[AuthorityInformationAccess]
URL=http://pki.lab.local/Certenroll/PolicyCA01.crt
[CRLDistributionPoint]
URL=http://pki.lab.local/Certenroll/PolicyCA01.crl
[basicconstraintsextension]
pathlength = 1
critical=true
These sections are not required at policy CA. Afaik, CDP and AIA extensions are not supported in non-root CA configuration files. The same is with issuing CA. And your issuing CA is missing PolicyStatementExtension section.
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool.

Question about full cycle charges and battery life

So I've had the new iPad since day 1 and absolutely love it, though recently I've noticed that my battery life doesn't seem to hold up as well as it has in the past. I've done three full cycle charges since getting it however during my latest one I accidently brought along my iPod wall charger and not the one that comes with the iPad. My iPad was fully discharged and I plugged it in assuming that in the 7 hour window I had that it would be fully charged within 5 hours, but this was not the case due to me having the wrong charger. After about 7 hrs of charging it was only at around 60-70% so I had to unplug it, bring it home, then plug it in once more using the correct charger. Probably a fairly obvious question but does this not count as a full cycle charge because I unplugged it? Should I perform another full cycle charge even though this most recent one was not even a week ago. I know you're supposed to completely discharge your battery as few times as possible so it worries me having to do it again so soon.
About battery life, I've noticed lately that my iPad battery seems to be depleting quicker than normal, and was hoping that perhaps this was caused by being overdue for a full-cycle charge which I may have flubbed as seen above. I'm aware of a majority of the little tips and tricks to prolong battery life however I'm not so knowledgeable on the "do's and don'ts" of charging the actual iPad so any information on that would be helpful. I should also note that unfortunately I accidently left by iPad in a hot car for a little over an hour and was tremendously devastated knowing what this can do to the battery, so could this be the main cause for a seemingly weaker battery?
Thanks for any feedback!

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Question about integration of STS and BPS

Similar Messages

Maybe you are looking for