Question about Java RMI/JNDI/IIOP and Linux IPCHAINS.

IPChains only recognises, per se, three protocols
-TCP
-UDIP
-ICMP
as I grasp things. Can one mention IIOP
directly in an IPCHAINS firewall,
or is one forced to allow one particular IP,
by protocol and Port number?
What is recommended for RMI
and JNDI here?

Zac1234 wrote:
IPChains only recognises, per se, three protocolsipchains? Blimey, I thought iptables took over from that ages ago.
-TCP
-UDIP
-ICMP
as I grasp things. Can one mention IIOP
directly in an IPCHAINS firewall,doubt it; although you could set up a rule for it called IIOP
or is one forced to allow one particular IP,
by protocol and Port number?that'd be where I'd start
What is recommended for RMI
and JNDI here?Well according to [this page|http://en.wikipedia.org/wiki/General_Inter-ORB_Protocol]:
+"IIOP (Internet Inter-Orb Protocol) is the implementation of GIOP for TCP/IP."+
so I suspect you'll only have to worry about TCP packets. However, details of the protocol itself are something you should Google for if you want definitive answers. Alternatively, consult someone who's used to maintaining firewalls.
Winston
Edited by: YoungWinston on Apr 17, 2010 3:54 AM
PS: This is a Java forum

Similar Messages

Question about Java RMI and Eclipse

I would like to create an application with which I can easily connect to a JAVA program, installed on a web server, through JAVA RMI. I have already created a ClientRMI.java and a ServerRMI.java and compiled them. The stubs also have been created properly.
When I run the application outside the Eclipse editor, everything works just fine! However, when I want to integrate the files into a bigger project in Eclipse... and starts running it, he tells me he can't find the stub class or something like that. I need to place this one in the classpath but I don't know how to do that in Eclipse? Could anyone help me with this problem?
Thanks!
This is the fault message I get:
no security manager: RMI class loader disabled)
D-me

Do you have an idea of what the answer to our
question could be?I don't have much idea about the question myself. I was groping in the dark. :-)
Anyway, the project classpath settings and the external jars (or dependent projects) are a few things which could be experimented with. I'm afraid I couldn't be much help without having a look at what you are trying to do. :-(
Regards,
x

Simple question about java.rmi.registry.Registry

Hi,
where the object java.rmi.registry.Registry takes a URL to rmiregistry when perform bind method.
thanks.

Ok, will try to explain.
I have a server that I register in the RMI registry. Client from a remote machine get the server (as a remote object) and calls his method for the generation of another object on the parameters passed. The server creates this object and tries to register it in the RMI registry, and this raises an exception Registry.Registry.rebind disallowed; origin /11.0.10.31 is non-local host.
11.0.10.31 is a IP - address of the client

Question about Java 1.5 compilation and Execution on Apple iPad 2

Despite the fact that everyone on the internet seems to say Official Java and ipad/ipad2 support will not happen,
I would like to press this issue a little further.
Is it yet possible to run a java.class file on ipad2,
-without resorting to a java applet in a browser?
-Using a java applet?
-installing a java runtime, officially or unnofficially (say, gcj, or another community effort) ?
-I know about JXXX, which allows me to compile java files, howerver it doesn't automatically have
rt.jar or javaee.jar for 1.5,1.6,1.7 yet.
I there a web browser on the internet that allows one to compile and execute
java code programs (inside an applet say), that provides real time System outputs,
and even supports events and all such? That I could use in ipad2 Safari?
webrenderer requires developers to pay $, at webrenderlink
Is there a no cost version like webrenderer?
if so, what is the URL?
Edited by: 848439 on 25-Sep-2011 20:12
Edited by: 848439 on 25-Sep-2011 20:21

848439 wrote:
Despite the fact that everyone on the internet seems to say Official Java and ipad/ipad2 support will not happen,
I would like to press this issue a little further.You should listen to "everyone on the internet" this time. Give it up, Apple isn't going to allow it. Its either do what Apple instructs you to do, or take a hike (and switch to the Android platform).
Imagine having to include instructions with your application on how to get a community supported Java runtime on an iPad while users know only the appstore interface. Its a battle you are not going to win.

Three questions about Java and Ftp

Hello, i've the following questions about Java and Ftp:
1- .netrc file is in $HOME directory but i can't access to this directory from java code. The following line producesan Exception (directory doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");
2- .netrc file must have the following permissions: -rw- --- --- but when i create the .netrc file the following permissions are on default: -rw- r-- r--, how can i change this permissions? (In java code, i can't use chmod.....)
3- Are there any way to pass parameters to a .netrc file? If i get to do this i needn't change the permissions because i can't modify or create/destroy this file.
Thanks in advanced!!!
Kike

1- .netrc file is in $HOME directory but i can't
access to this directory from java code. The
following line producesan Exception (directory
doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");$HOME would have to be replaced by a shell, I don't
think you can use it as part of a legal path.
Instead, use System.getProperty("user.home");
Ok, thanks
2- .netrc file must have the followingpermissions:
-rw- --- --- but when i create the .netrc file the
following permissions are on default: -rw- r--r--,
how can i change this permissions? (In java code,i
can't use chmod.....)Yes, you can: Runtime.exec("chmod ...");
I need to use estrictly the .netrc with -rw- --- --- permissions
Yes, i can use Runtime.exec ("chmod ..."); but i don't like very much this solution because is a slow solution, am i right?
3- Are there any way to pass parameters to a.netrc
file? If i get to do this i needn't change the
permissions because i can't modify orcreate/destroy
this file.I don't think so. Why do you need the .netrc file in
Java at all? Writing a GUI frontend?I want to use automatic ftp in a java program and FTP server, the files and path are not always the same, so i can:
- modify .netrc (for me is the complex option)
- destroy and create a new .netrc (is easier but i have permissions problem)
- use .netrc with parameters but i haven't found any help about it
Thanks for your prompt reply!!!!
Kike

Question about Java's HttpServer: Threading? Backlog?

Hello,
I have two questions about Java's HttpServer (com.sun.net.httpserver). From the JavaDoc:
>
Management of threads can be done external to this object by providing a Executor object. If none is provided a default implementation is used.
>
How can I get information about the default implementation in 1.6.0_13? Do you know the behavior? From my observations, the default implementation uses no Threads, meaning every request is handled in the same Thread, this results in handling the requests to the HttpServer one after another.
Is this right?
The second question is about this, also from the JavaDoc:
>
When binding to an address and port number, the application can also specify an integer backlog parameter. This represents the maximum number of incoming TCP connections which the system will queue internally. [...]
>
When setting the backlog to -1, it uses the systems default backlog. How can I determine the systems default backlog? Can some lines of Java code reveal it (there is no getBeacklog() method)? Or is it up to the Operating System (we use Redhat Linux)?
Thanks a lot for your help!
Regards,
Timo

How can I determine the systems default backlog?You can't. There is no API for that even at the C level.
Can some lines of Java code reveal itNo.
Or is it up to the Operating System (we use Redhat Linux)?Yes. Linux provides a large default. It seems to be at least 50 on most platforms. This is not something you should be worrying about.

Some questions about javacard 2.1.1 and smartcardio

Hello i have some question about java card 2.1.1 and the smartcardio package.
1.) I want to sign a message with the Signature.ALG_RSA_SHA_PKCS1 algorithm. I use the following code in the applet to sign the message:
final static byte P1_CREATION_MODE = (byte) 0x01;
final static byte INS_SIGN_MODE = (byte) 0x60;
final static byte SmartCard_CLA = (byte) 0xB0;
private void signMessage(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        byte byteRead = (byte) (apdu.setIncomingAndReceive());
        signature.init(privateKey, Signature.MODE_SIGN);
        short length = signature.sign(buffer, ISO7816.OFFSET_CDATA, byteRead, buffer, (short) 0);
        apdu.setOutgoingLength((short) length);
        apdu.sendBytesLong(buffer, (short) ISO7816.OFFSET_CDATA, (short) length);
        apdu.setOutgoing();
    }On the host side I use the following code to connect to the card and to send the sign apdu:
if (TerminalFactory.getDefault().terminals().list().size() == 0) {
            LOGGER.log(Level.SEVERE, "No reader present");
            throw new NoSuchCardReader();
        /* Select the first terminal*/
        CardTerminal terminal = TerminalFactory.getDefault().terminals().list().get(0);
        /* Is a card present? */
        if (!terminal.isCardPresent()) {
            LOGGER.log(Level.SEVERE, "No Card present!");
            throw new NoSuchCard();
        /* Set the card protocol */
     Card card = terminal.connect("*");
        ATR atr = card.getATR();
        LOGGER.fine(getHexString(atr.getBytes()));
        LOGGER.fine(getHexString(atr.getHistoricalBytes()));
        CardChannel channel = card.getBasicChannel();
        CommandAPDU cmd = new CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, new String("datadatdatadata").getBytes(), (byte) 0x40);
     ResponseAPDU response = channel.transmit(cmd);
        card.disconnect(false);But this does not work and i got the following error
javax.smartcardio.CardException: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
        at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:202)
        at sun.security.smartcardio.ChannelImpl.transmit(ChannelImpl.java:73)
        at de.upb.client.smartmeter.SmartMeter.initSmartCardApplet(SmartMeter.java:114)
        at de.upb.client.smartmeter.SmartMeterApplikation.main(SmartMeterApplikation.java:39)
Caused by: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
        at sun.security.smartcardio.PCSC.SCardTransmit(Native Method)
        at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:171)
        ... 3 more2.) 3Des encryption
I want to use the 3Des algorithm to encrypt my data. I use
keyDES = (DESKey) KeyBuilder.buildKey(KeyBuilder.TYPE_DES,
                    KeyBuilder.LENGTH_DES3_2KEY, false);
cipherDES = Cipher.getInstance(Cipher.ALG_DES_CBC_ISO9797_M2, false);But i do not know what is the aquivalent on the host side??
3.) Another problem is that i am not able to send the modulus of a public key from the host applikation to the smard card
new CommandAPDU((byte) 0xb0, (byte) 0x20, (byte) 0x01, (byte) 0x00, modulus.toByteArray()); // create the apdu
// the method in the applet
private void setServerKeyMod(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        try {
            byte byteRead = (byte) (apdu.setIncomingAndReceive());
            short off = ISO7816.OFFSET_CDATA;
            // strip of any integer padding
            if (buffer[off] == 0) {
                off++;
                byteRead--;
            publicKeyServer.setModulus(buffer, off, byteRead);
        } catch (APDUException ex) {
            ISOException.throwIt((short) (SW_APDU_EXCEPTION + ex.getReason()));
    }The error code is 6700
4.) My last problem ist, that i am not able to use a value bigger than 0x7F as the ne field in the apducommand, because i get the following error
CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, data, (byte) 0xff);
java.lang.IllegalArgumentException: ne must not be negative
        at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:371)
        at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:252)I thought that it this should be possible in order to use all the bytes of the response apdu.
If you need more code to help please let me know.
Cheers
Edited by: 858145 on 06.07.2011 08:23

2) What is PKCS? what is the difference between
PKCS#11 and PKCS#15??PKCS is the abbreviation of "Public-Key Cryptography Standards"
PKCS #11: Cryptographic Token Interface Standard
See http://www.rsasecurity.com/rsalabs/node.asp?id=2133
PKCS #15: Cryptographic Token Information Format Standard
http://www.rsasecurity.com/rsalabs/node.asp?id=2141
If you want to use yor smartcard as secure token it doesn't have to be a JavaCard.
BTW: I don't remember a way to access PKCS#15 tokens on a JavaCard from within an oncard JavaCard program. If you want to use keys in your oncard program, you have to transfer it onto the card or generate it oncard and export the public key by your own oncard/offcard code.
Jan

Here's a very basic question about 2 TB external drives and Time Machine.

Here's a very basic question about 2 TB external drives and Time Machine.
Ihave a Mac Pro with a .75 TB and 1 TB drive. It also has a 1 TB 2ndinternal drive. My current external drive is too small so I'll begetting a 1.5 TB or 2 TB drive.
Obviouslythe new larger 2 TB drive will backup everything on the Mac Prointernal drive with Time Machine. But there will be 1 TB of space leftover going to waste.
ShouldI partition the external drive so that the TM portion will be 1 TB andthe use the remaining extra partition for additional file backups withCarbon Copy?
Thanks for any insights.
I tried searching around on the new Apple discussion forum, but I find it much harder to use than the old forum I used to use.

The problem with terabyte drives is that that a 3 TB is about as big as you can get without going into RAID territory. Ideally, a Time Machine drive should be 3 times as large as all the drives you are backing up. So, if you have 2.75 TB of internal storage, you should have 8 TB of Time Machine space.
Of course, that is "should". If your TB drives are mostly empty, then you can get away with something 3 times the size of your used disk space. Just remember that you are pushing it. Linc is right about Time Machine needing space to work.
It is unlikely that you have regular churn on 2.75 TB of disk. I suggest identifying which drives and folders have the most activity and excluding those drives and directories that don't change much. It would be better to archive the data that doesn't change often and keep it out of Time Machine. Then you may be able to get away with a 2 TB Time Machine drive.

Question about 2 TB external drives and Time Machine.

Here's a very basic question about 2 TB external drives and Time Machine.
I have a Mac Pro with a .75 TB and 1 TB drive. It also has a 1 TB 2nd internal drive. My current external drive is too small so I'll be getting a 1.5 TB or 2 TB drive.
Obviously the new larger 2 TB drive will backup everything on the Mac Pro internal drive with Time Machine. But there will be 1 TB of space left over going to waste.
Should I partition the external drive so that the TM portion will be 1 TB and the use the remaining extra partition for additional file backups with Carbon Copy?
Thanks for any insights.
I tried searching around on the new Apple discussion forum, but I find it much harder to use than the old forum I used to use.

John,
I'm not sure why you posted in the iMac forum so I'm going to attempt to get you to the correct spot. I would recommend reposting in the Time Machine Forum, this is part of the OS X forums (Leopard or Snow Leopard) because you are using Snow Leopard (your profile indicates you are) please click Apple Support Communities and type Snow Leopard. Then you can narrow the search down by clicking Refine this List.
Roger

Questions about Java Servlets and JSP

Hi,
I'm a confident Java Programmer (and really enjoy using this language) but am very new to Java servlets and Java Server Pages.
I have previously worked with Perl on my web projects (simple 'league' style voting pages). I read in my 'Core Java' book that I should no longer use perl or even cgi.
I need to know more about Java servlets and Java Server Pages so I can make the switch to a 'real' programming language.
I have a few questions:
How should I start to learn JS and JSP?
How applicable will the java knowlegdge I have already be?
Are JSP common on the world wide web?
What tools do I need to start? (I currently develop in JBuilder and have Java 1.4.1 Standard Edition)
Is it likey my web host (and others) will support JSP?
Thank-you very much for helping a novice get started,
Regards,
Paul

Hi, Steve ...has to be frustrating! But do not despair.
Let's suppose the servlet it's named MyServlet on package org.servlets
WEB-INF should look:
WEB-INF
classes
org
servlets
MyServlet.class
web.xml
web.xml file should have this two declarations:
<web-app>
<servlet>
    <servlet-name>MyServlet</servlet-name>
    <servlet-class>org.servlets.MyServlet</servlet-class>
</servlet>

<servlet-mapping>
    <servlet-name>MyServlet</servlet-name>
    <url-pattern>/MyServlet</url-pattern>
</servlet-mapping>

</web-app>Now, once the container starts (Tomcat?), you should be able to see that servlet in:
http://localhost:8080/[my-context/]MyServletAnd what my-context is? The web application context. This string should be empty if your're deploying to the root context, otherwise should the context name. In Tomcat, deploying to root context defaults to using webapps/ROOT.
Sorry for my English, but I felt the need to answer your request. I hope it helps despite my writing.

Some questions about Java deployment steps and techniques

All my java experience is coding and testing in my local machine (where, of course, a jre is available), but ... when I deploy to other people, they may not have a jre or they may have a different version of it than the one needed to run my application. I've read different stuff online including jars and java web start but still I have many questions.
(1) first one first, Sun contradicts common sense, when it says that i can redistribute my own customized light version of their jre by taking out some files (java.sun.com/j2se/1.5.0/jre/README). there are two ways for me to get a jre: Way one is by downloading one from Sun, the download comes as an *.exe file and I don't see how I can take files out of it, so do you know how?. Way two would be by simply copying the set of files i choose (according to that Readme) from my current jre installation (the one on my \java\jdk\jre directory), does this make sense?, (if you're under windows) doesn't an installed version of a jre need a couple of dlls plus some new registry entries?, this contradicts common sense, if I'm not wrong, that Readme is a nonsense, but since that readme is at each of us jre installation \java\jdk1.x\jre\Readme, it can't be a nonsense, therefore I'm wrong, therefore the answer is either Way 1 or Way 2, HOW? ... or maybe there's a Way 3?
(2) Say I never read that Readme so I download the jre (as an exe) to bundle it along with my application in a jar ... now I'll give my neighbor either a jar with two exes or two exes jars ... is there a way to make a jar so that two files get executed? ... if the answer is No and I have competition from a second neighbor, then I believe I'm asking my first neighbor to choose my application based on our friendship, that's not reasonable if we are doing business, so Java loses.
(3) Say that my application is a single executable file like this,
class X{
public static void main(String[]$$$){
System.out.println("Console, where are you?");
At this point, say that my neighbor accepted the two executables, he executed the jre.exe and has jre6 in his system, now he double clicks on my X.jar ... it's a console application and jar files are not associated with the java.exe launcher since java 5, but with javaw which doesn't open any console ... how do i make it so a console opens and prints "Console, where are you?" ... do I ask my neighbor-customer to add a couple of lines to his path and open his console and (please) enter java -jar jarfile.jar? ... isn't it too much? ... i hope i'm wrong cause this is kind of discouraging
(4) I've read that by installing a more recent version of a jre on a system that has an older jre (there to help other applications work), I might be causing a problem for the other applications to run ... I guess that's the reason why that Readme kind of encourage to redistribute a "private" version of a jre (one that doesn't come with a java.exe launcher ... any feedback on this?
(5) I'm reading a lot of hype about Java Web Start ... it looks better than the traditional jar/jre deployment ... but setting up a MIME type to *.jnlp, it doesn't come with some free hosting I've checked ... somebody can recommend a free hosting service that allows to set a *.jnlp MIME? (I'll appreciate a suggestion here, cause I would like to test Web Start)... and, anyhow, how you people compare it with the paradigm of the single executable file?.
Thanks. Your feedback is highly appreciated.

jorgelbanda wrote:
..(5) I'm reading a lot of hype about Java Web Start ... It's gratifying to think that someone who wants to deploy apps., has the common sense to search first! You would not guess how I often I hear "I wanna' make an EXE" shortly followed by "What's webstart?".
...it looks better than the traditional jar/jre deployment ... but setting up a MIME type to .jnlp, it doesn't come with some free hosting I've checked ... OK. You cannot define new mime types, but perhaps the site already has it defined. An easy way to check is to upload 'any old file' that ends in .jnlp and use the [mime type checker|http://pscode.org/mime/] to see what content type it is served as.
..somebody can recommend a free hosting service that allows to set a .jnlp MIME? (I'll appreciate a suggestion here, cause I would like to test Web Start)... I'm pretty sure the Google based sites offer it.
Note that I edited the asterisks out of your post, to avoid the forum software parsing half the reply as bold.

Question about Java implementation in Linux platform

Hello,
I shall implement one Java program in Linux platform. I'm a newer to linux. Need I install some special software in Linux platform to compile and run JAVA program?
Thank you in advance
java_linux

Sorry, this forum is about Sun Studio, which is a collection of native compilers and tools. About Java, please use Java forum; for example, one of these: http://forums.sun.com/category.jspa?categoryID=5

Question about java thread implementation

Hi All,
I am comparing the performance of the Dining philosopher's problem
implemented in Java, Ada, C/Pthread, and the experimental language I
have been working on.
The algorithm is very simple: let a butler to restrict entry to the
eating table, so that deadlock is prevented.
It turns out that the java code is the winner and it is 2 times faster than C!
The comparison result really surprised me, and raised a big
question mark : why java runs so fast? I did not use high-level synchronization
constructs like Semaphores, atomic variables, etc.
I vaguely recall that Java thread is actually implemented by the underlying
system thread library(so on linux, the default would be NPTL, on windows NT threads,
and on Mac OSX it would be Cthread?). Can no longer remember where I read that.
Does anyone here have some notions about the Java thread
implementations(where is this formally explained)? or Does anyone know where
I can possibly find relevant literature or the answer?
thanks a lot.
cheers,
Tony

Peter__Lawrey wrote:
google has lots of information on java threaded.
One thing java does is support biased locking. i.e. the thread which last locked an object can lock that object again faster.
This may explain the difference. [http://www.google.co.uk/search?q=java+usebiasedlocking]
Note: you can turn this option off and other locking options to see if a feature is giving you the performance advantage.
Personally I have found that real world multi-threaded applications are easier to write in Java, esp. when you have a team of developers. For this reason, alot of C/C++ libraries are single threaded, even when there would be a performance advantage in being multi-threaded (because its just too hard in reality to make it thread safe and faster because of it)I didn't know that, very interesting :-)

Some questions about using non-english characters and keyboard layouts

I've found a lot of guides about how to enable characters in Linux, and that is easy enough, but I want to understand it better.
The way that I understand it, if you don't enable a given set of characters in locale.gen, then in theory you should not be able to either use or display a that set of characters in any programs (however, certain programs, like web-browsers seem to have work arounds).
Furthermore, in order to be able to type characters in X programs, you need to enable those keyboard setups in your xorg.conf (in addition to enabling those locales in locale.gen). I don't think that this effects the displaying of characters
Then, Last, you need a way to switch back and forth between different keyboard layouts within your X environment in order to type those characters. There are programs to assist in switching keyboard layouts provided by some DE's. By using these keyboard layout tools, I alter the behaviour of all programs started in X. (for example, swithing keyboard layouts in gnome's settings will alter the behaviour of kde programs, firefox and openoffice.)
How close am I?
A few more questions:
If I'm a Spanish student which locales do I need to enable. There is a long list of locales that start with ES, and I don't know if there are any drawbacks to enabling unnecessary locales. I think that the ones that I need are es_ES* (Spanish spanish?) and es_MX* (Mexican spanish?).
What is do the *@EURO locales do?
what does the locale setting in rc.conf do?

I've found a lot of guides about how to enable characters in Linux, and that is easy enough, but I want to understand it better.
The way that I understand it, if you don't enable a given set of characters in locale.gen, then in theory you should not be able to either use or display a that set of characters in any programs (however, certain programs, like web-browsers seem to have work arounds).
Furthermore, in order to be able to type characters in X programs, you need to enable those keyboard setups in your xorg.conf (in addition to enabling those locales in locale.gen). I don't think that this effects the displaying of characters
Then, Last, you need a way to switch back and forth between different keyboard layouts within your X environment in order to type those characters. There are programs to assist in switching keyboard layouts provided by some DE's. By using these keyboard layout tools, I alter the behaviour of all programs started in X. (for example, swithing keyboard layouts in gnome's settings will alter the behaviour of kde programs, firefox and openoffice.)
How close am I?
A few more questions:
If I'm a Spanish student which locales do I need to enable. There is a long list of locales that start with ES, and I don't know if there are any drawbacks to enabling unnecessary locales. I think that the ones that I need are es_ES* (Spanish spanish?) and es_MX* (Mexican spanish?).
What is do the *@EURO locales do?
what does the locale setting in rc.conf do?

I have a question about weblogic RMI , how can I resolve it.Thank you

I have a question about the weblogic RMI .
I have a program.web services+weblogic RMI +Data Sources When I run the program in the console application.it is ok.But When i run it with the web services(it 'is mean Get some parameter and run the different program).it's fail.The Exception is
cannot assign instance of yype weblogic.rmi.RMIServices_1033_WLStub to field demo.RMIServer_1033_WLStub.stubinfo of type weblogic.rmi.internal.StubInfo in instance of demo.RMIEsrver_1033_WLStub
how to resolve .Thank you.

Hi Charles,
Parental Controls has always had problems with https sites, no idea if it's fixed in 10.9.x or not.
When you setup your Mac it shouldv'e made an admin account, are you not running from that account, or did you somehow change it to a Managed account???

Question about Java RMI/JNDI/IIOP and Linux IPCHAINS.

Similar Messages

Maybe you are looking for