Question about MaxDb config files

I have a problem where a database is taking 28 hours to backup.
While the db backup runs, the log backup will not.
I want to know if there is a way to get around that; either by specifying a unique set of configs so temp file names won't conflict and 2 backups can run simultaneously or some other way.

Let me recommend using the 'Database Analyser' for this. In an SAP environment, this tool autostarts and collects data every 15 minutes (default interval). The data itself is kept in one 'dban.prt' log file plus detailed info in various Excel style csv files.
If you have an SAP system nearbei, you could integrate the MaxDB you want to monitor via TA DB59 or use DB50/LC10, if MaxDB is running in an SAP system. Of course, you could also just look at the csv files directly, but they are much easier to use within the SAP world.
Please have a look at our FAQ note 1423935 for further details.
This means in regards to your specific question: Start the Database Analyzer (if not already active) and go to the 'DBAN_FILLING.csv' file. There you will find the filling levels for temporary and permanently data plus min and max values and averages...

Similar Messages

Basic question about importing wma files

Hi, I have a basic question about importing wma files. I ripped some cd's on a Mindows computer using Media Player, but now want to copy them to my Mac and use them in iTunes on my Mac. when I use Import in iTunes, nothing happens and I cant even seem to copy them one by one using the Music folder.
Can someone help me?
thanks
eMac Mac OS X (10.4.4)

iTunes for Mac doesn't support .wma files.
If you can use a PC to convert them, you can use one of many freeware applications. Google for 'wma to mp3'.
For the Mac there's the shareware program EasyWMA that can convert them.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data)

Some questions about importing HTML files

Hi, folks
Let's suppose we want to import a pack of HTML files formatted in HTML5 wit's it's CSS into a double-oriented folio. A couple or three questions about that, please:
1. Is there a limit for a reasonable quantity of HTML files I can import into a folio? I mean.. 100 would be way too much, for instance?
2. These HTML files could be navigated and referenced from inside TOC-pages made in InDesign,right? (navto://..., I gues?)
2. Will it be possible, by means of HTML adaptative design techniques, to treat both orientations (vertical and horizontal) as different viewports or screen sizes so that the design adapts for instance the column width with its CSS?
3. That said, will the InDesign final app. respect that adaptative CSS rules?
I am asking this because we are looking for a way to inject big quantities of content with a very similar design into our application in a really fast and automatizable way and I have the suspicion* that importing HTML5 preformated CSS files could be the a very good and simple alternative to importing XML into InDesign templates as we start out content as tagged almost-html files.
Thanks a lot
Gustavo Sánchez (Posting from Madrid)

I assume you are asking about using HTML articles.
1. There is no limit beyond simply keeping things reasonable.
2. Yes. Just use navto://articlename
3. Yes. I've used min-width of 768 and max width of 1024 to control it.
4. InDesign does not enter into any of this with the exception of using the folio builder panel. Everything else is done in Dreamweaver or whatever program you decide to use for the article.
If you want to restrict the HTML articles to one orientation or the other, use the _h and _v suffixes.
Bob

Where can i find the doc about xml config file of 9ias?

i cant find the "Oracle9iAS Containers for J2EE User’s Guide",
it should contains the info about the xml config file, i dont
know why oracle launch a product without the config guide, i
have read ton of material for learning the configuration of 9ias
but still have not find the answer!
i cant find it in otn:
http://otn.oracle.com/tech/java/oc4j/content.html#technicaldocs,
it have jsp, servlet....etc guide but no config guide, if
someone seen it in microsoft or sun or borland website, please
call me :)

i mean the deployment config file in the application server like: server.xml, application.xml, web.xml, it is the J2EE standard, and can be used between all application server, tomcat, 9ias, weblogic........

Few Questions About Backing Up Files

Okay, I'm pretty new to this, and have checked the support pages, but I do have some questions about backing up my files.
I'm running out of room on my computer's hard drive, and am wondering if burning the library to CDs will allow me to quickly restore my library on my computer when I sync my iPod.
I know that when an iPod syncs with a comp, it will lose any songs that aren't on the library list. (If I deleted some songs to free up room, I'd lose those songs on my iPod when I synced it up.) Is there a way to prevent that from happening? Some way to save a headache continuously restoring my iPod's library every time I want to add a new song or recharge it?
I'm on Windows XP, if that matters.

Best and easiest solution is to buy an external hard drive. Then simply drag and drop your iTunes folder from your internal onto the external and copy the entire library.
Patrick

Question about calling batch file by using the System Exec+.vi?

Hi
I have a problem about calling batch file. I know that the system exec is equivalent to "run" in Windows. I called the batch file c:\rtxdos\bs\ch0.bat successfully in the "run" but it didn't work in the LabVIEW program. The dos prompt had an error message "Bad command or file name" and it just happen when I call this batch file in LabVIEW. Why?
Bill.

Hi,
Try to set the "working directory" parameter of System exec.vi to the directory where the batch file is located. It may help.
Good luck.
Oleg Chutko.

Location and info about the config file for Shared connection URL

Hi,
Where does HypGetSharedConnectionsURL VBS function retrieve information from? In the help, only information is that it retrieves from the config file
Thanks

This URL is stored within the Windows registry.

Question about backendobject-config.xml file

Hello,
I am trying to register a backend object in xcm/customer/backendobject-config.xml
file,
my entry looks like:
<backendobject xmlns:isa="com.sapmarkets.isa.core.config" xmlns:xi="http://www.w3.org/2001/XInclude" xmlns:xml="http://www.w3.org/XML/1998/namespace">
     <configs>
     
     <xi:include href="$/modification/backendobject-config.xml#xpointer(backendobject/configs/*)"/>
          <config isa:extends="../config[@id='crmdefault']">
          <businessObject
          type="PricingBEO"
          name="PricingBEO" className="com.isa.pricing.beo.PricingBEO" connectionFactoryName="JCO" defaultConnectionName="ISAStateless"/>
          </config>
     </configs>
</backendobject>
but when I am debugging, the backend objet is null. Can somebody please tell me
what is wrong with my entry?
Thanks,
Harsha

Are you using crm as a backend? One option is that you are extending wrong config...

Question about changing a file type into another file type

Hello. This isnt a java question but you guys have been so helpful in the past I hope its ok if I ask this question for a friend.
How can I import a scriptware file into Screenwriter 2000, or change a .scw file into a .tag file?
Anyone who can help thanks.

I know nothing about scriptware or Screenwriter. But, my only advice is to see if Scriptware can export some other file type (not necessarily a .scw file) that Screenwriter can read. Sometimes, when I have two text editors whose native formats are incompatible (like opening a paper typed in a new version of Microsoft Word using an old version of WordPerfect or something), I save the file as an RTF file, rather than in the native format. Maybe something like that applies to your situation, too.
Hope that helps.
Jason

OSD: different pxe, question about different wim-files

Hi,
Please see this question, I'm somewhat confused about the different
wim files.
I can see the default winpe.wim and a different wim next to it which has name winpe then environment then number (winpe.sccm0022.wim), what is this file.
And, like in my post, why can't I use this image to import into a pxe and boot from that?
Please advise.
J.
Jan Hoedt

Hi,
What is your goal with this? boot to SCCM and do OS deployment or what is your purpose? when dowloading the boot .wim file from a DP parameters are passed along like MP and so on. So you cannot use that .WIM file and pxe-boot from another PXE solution and
do OSD from ConfigMgr.
That is why Johan's unsupported solution would be the way to try it.
http://www.deployvista.com/Blog/JohanArwidmark/tabid/78/EntryID/54/language/en-US/Default.aspx
regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Question about long audiobook files before I buy Zen Mi

I am in the market to buy a hard dri've MP3 player for the purpose of playing audio books. Specifically, I want to download audio books from my local library's netlibrary account and listen to them on the go (these files are 32kbps DRM WMAs). These files have caused problems for two different players I have tried, due to their long length (most files are over 00MB, and play for 8+ hours). I have an old iRi'ver flash player, which will play these files fine, until you get about 4 hours into the file. Then, when you turn off the player, the time elapsed jumps from where you were to 2 hours or so. What this means is that you can't listen to the entire book unless you play the book for its entire duration without stopping it or turning it off. I next tried a Rio Carbon, but it has a different problem. Every time you turn off the Carbon and turn it back on, it will lose it's place in the file by 0min-hour, depending on how long the track is and how much you have listened to. The only ways around this is to either never turn the player off, or write down the time elapsed before you turn off the player, and then fast forward to that time when you turn the Carbon back on. After fighting with it for a week, I returned the Carbon.
So my question is, has anyone actually used a Zen Micro to listen to a very long audiobook, and does it have any weird issues like I have experienced with other players? All I want the thing to do is remember where I left off when I power off the device, within a few seconds.
Thanks

Lots of people have audio books on their micros and i havent head of anyone complaining about them. one good feature the micro has that i believe other dont is the ability to place book marks in a song/audio book at a set time so you can automatically go to where you want without searching.so you could save the book marks for each chapter or something.

Question about reducing PDF file size on export

I have a large file that is generates a PDF about 75MB when exported with the "[High Quality Print]" preset. However, I can reduce the size down to to under 5MG in Acrobat if I use the Tools>Flattener Preview>[Medium Resolution] setting (image attached). Is there a way to generate this smaller file directly from InDesign? I couldn't figure out how to do this with InDesign's Flattener Preview or Export options, but it is very likely that I missed something.

Eugene Tyson wrote:
When you choose Smallest File size, it is still using the PDF 1.6 setting.
Change this to Acrobat 4 (PDF 1.3) this will automagically flatten the PDF - which means you shouldn't have to do it in Acrobat.
That should get you a nice small file size, I believe.
Flattening transparency in InDesign will not necessarily yield a smaller PDF file size. Transparency flattening will not automatically convert placed vector artwork to raster images unless that vector artwork is actually involved with transparency. And even then, whether you end up with a smaller file depends on a number of factors.
If the reason for the very large file size is indeed very complex vector artwork and you are willing to sacrifice quality, conversion of such vector artwork to raster might yield a significantly smaller exported PDF file. To accomplish that conversion, I would personally suggest converting the most offensive (in terms of file size and complexity) of such files in Illustrator (assuming that they were .AI files) and exporting them as .TIF files (to avoid the potential imaging artifacts of JPEG compression).
- Dov

A question about updating metadata files in plug in

Hello
I 'm trying to monitor my stand alone java app.
I read the chaper Target Types and Default Collections ( my app exposes jmx beans)
all seems to work ok ( i mean the part wherre it says ..
emctl register oms metadata -service targetType -file full
path/TargetTypeMetadata.xml -pluginId Plugin Id -sysman_pwd sysman
emctl register oms metadata -service storeTargetType -file full
path/TargetTypeMetadata.xml -pluginId Plugin Id -sysman_pwd sysman
emctl register oms metadata-service default_collection -file full
path/TargetTypeCollection.xml -pluginId Plugin Id -sysman_pwd sysman
but , the next line is not clear to me:
emctl register oms metadata-service systemStencil -file full
path/TargetTypeStencil.xml -pluginId Plugin Id -sysman_pwd sysman
My question is: what is TargetTypeStencil.xml file? where can i found it?
Do I realy need it?
and after restart the agent as it says , could i see my beans ? ( i used emcli jmccli tool and created the metadata / default_collection files) ?
Thanks.

So, I folowed the instructions in chapter 13.7.1 ( ProgrammersReference) - EM 12C release 2.
I created my own mbeans , used the emctl jmxcli etc ..
I created both files : for metadata, and default_collection ( The files which the emctli genertaed for me )
I did it on the agent machine. I copy the files under the PLUGIN dir in the agent machine too.
I registered the files using mrs service as it's written ( chapter 16 ) . ( after I copy the files from the agent to the mrs ( oms machine ) machine .
Every thing seems to be OK . I restarted the agent.
Now, when I open the EM console' I can't see the metrics which i defined in the generated files !
Am i missing something??
Please Help!

Questions about "Diff Sequence File With..." function

Hello,
I've started working on a project where I'm maintaining a piece of older code written by a since-departed employee of my company. It's a TestStand 3.0 sequence file calling on Labview 7.0 code. The thing is, there were two of these installations done at different times and, somewhere in the woods between stations 1 & 2, the code base diverged. Part of it was due to not being able to get exact duplicate hardware for the PXI chassis and part was, apparently, due to the fact the client used the 2 machines to test different UUT models.
So, I'm looking at copies of the installed code base on the two machines using the diff feature in TestStand. (If it makes a difference, I'm doing this viewing in TestStand 3.5 since TS3.0 has mysteriously gone corrupt on me at the moment on my main development computer and, if memory serves, you have to uninstall all the later version of TS to reinstall an older version. An altogether fun process, no doubt, but a little time consuming.)
Anyway, the first thing I notice is that very many of the sequence steps have different Step Properties.Step ID values that look something like this: "ID#:2vMTp0db002mQDXArddRSA". Messing with the diff screen showed an option to "Ignore Unique Step Ids" which got rid of these. Regarding these unique step ID's: When are they generated and do they remain constant on a particular machine? Beyond mere curiosity, I wonder because another diff is in some of the "On Pass Target" or "On Custom Condition True Target" under certain Step Properties and the value under there looks suspiciously like those unique ID's (i.e. ""ID#randomstuff""). Are these all dynamically updated at runtime or will I break something by changing those (say if I copy a sequence from one version overwriting it in the other)?
So, I filtered the unique ID's out. The next large area of difference is that many, but by no means all, Labview VI calls have a difference under Step Properties > Flexible Labview Adapter Properties > ViCall > Connector Pane Checksum > Value. Also, in a few other instances, ViCall > error out > Connector Number is different as well. Does this indicate a different underlying VI?
There are a few other differences, but I can interpret those. My goal is to get one sequence file for both machines so the code will be easier to maintain. I do think that some of the VI's with different Connector Pane Checksums may be different between the two installations since one of the different hardware components required a different driver library. This leads to a third question, what does it take to use identical sequence files when the underlying VI's might differ? Is it just the interface needs to be the same? Like the connector pane has the same geometry and data types for the exposed inputs and outputs?
Thanks for any help,
Mike
Solved!
Go to Solution.

I just got off the phone with NI support, so no worries on the answers.
Short versions:
The unique ID's are regenerated when a sequence is copied.
Teststand doesn't need higher versions uninstalled to reinstall an earlier copy.
Connector Pane Checksum implies a different underlying VI, but having the same connector geometry/inputs/outputs/types should allow you to have a different VI for different installations without different sequence files.
Still waiting to hear back from support on whether the goto pointers get updated properly when a sequence or portion of a sequence is copied.

Questions about IDoc to file scenario

I 'm confused, and have a few questions:
1, we need to define a product for it at least , assign it to either of the systems?
2, we don't have to configure an IDoc communication channel, do we?
3, does the receiver system (file/ftp) need a logical system? and define it by t-code BD54, in XI or R/3?
4, at least define techinical system and business system for R/3?
Can you explain the sld configuration to me ?
thanks a lot.

Hi,
,1) we need to define a product for it at least , assign it to either of the systems?
    Ans: Yes we need to define a product.
2, we don't have to configure an IDoc communication channel, do we?
Ans: Sender agreement and Sender IDOC communication channel is not required as IDOC adapter
        resides on ABAP stack.
3, does the receiver system (file/ftp) need a logical system? and define it by t-code BD54, in XI or R/3?
Ans: For third party system from ID create the business system and use that Business system for File or
        FTP system.
Business System.
1.Goto Business Landscape->New Business System->Name the business system.
2. Choose the technical system that needs to be attached->WebAS ABAP->Technical System Name.
Business System have an entry in the SLD and Buiness Service do not.
Business Systems are used when you are sending data to and from an R3 system and can be of ABAP, JAVA and Third Party Types.
Business System is a logical representation of a Technical System.
Business Service is a abstract representation of a System. For instance, www.google.com have a several system working together and IPs of this machines change eventually. When we use a Business Services like google we reference a computer that we don't know the phisical implementation.
4, at least define techinical system and business system for R/3?
Technical System
In SLD, click on technical landscape->New Technical System->WebAS ABAP.
Ans: Yes : Technical system is a phisical machine, it have a IP. Can be a BBDD, ERP, J2EE ......... a Business System is a logical term that we use into the Business Scenarios and represent these Technical System that we had created.
Can you explain the sld configuration to me ?
SLD is the place where u can define systems that are existing in ur landscape. using these systems u can transfer data from one system to another using PI.
TBIT40:
https://websmp109.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT40
/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak - SLD preview
SLD - http://help.sap.com/saphelp_nw04/helpdata/en/6e/fba1c735e0b44496072595092d924c/frameset.htm
Error while reading ID of own business system from the SLD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30f8bd90-0201-0010-dd9a-c8a7f52c47aa
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/652b1f46-0a01-0010-25ae-e7cb07b55414
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c00e7efc-0f27-2a10-d9a2-c46fc3863c20
Check this out
http://help.sap.com/saphelp_nw04/helpdata/en/56/361041ebf0f06fe10000000a1550b0/content.htm
Log into SLD and click the Help Link
You will get the detailed documentation for SLD for your version
Thanks,
Satya Kumar
Reward if it is useful
Edited by: SATYA KUMAR AKKARABOYANA on Apr 24, 2008 12:30 PM

Question about MaxDb config files

Similar Messages

Maybe you are looking for