Question about Mega651's IR-controller

Hi!!
I use the Mega 651 as a media PC. Can the included IR-Device be used to turn the PC on??
Which settings do I have to make??
Pls help!!

1. With 8 AP's only, a WLC would be nice-to-have but not necessary. You can configure WLSE and it will do some limited functions.
2. This depends on the signal strengths, wireless coverage and configuration. If you enable WLSE, for instance, and you have no wireless black spots, then roaming should be no issues.
3. See #2.
4. You can configure multiple SSID (up to 16 are broadcasted) but if one AP doesn't have the SSID you use for roaming, the association will drop when the client tries to join that particular AP. It's like mobile phone towers. If your carrier is not in the area, you sure won't be able to use your mobile phone in that area.
5. For 8 1130 APs, I'd recommend the smallest of the lot: 2106 with either 6, 12 or 25 AP licenses. I'd recommend you the 25 AP licenses. If your finances allow you something bigger, then consider either the 4402 (25 AP licenses) or the 5508.
Cisco 2100 Series Wireless LAN Controllers
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps7206/ps7221/product_data_sheet0900aecd805aaab9.html
Cisco 4400 Series Wireless LAN Controllers
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps6307/product_data_sheet0900aecd802570b0_ps6366_Products_Data_Sheet.html
Cisco 5500 Series Wireless Controllers Data Sheet
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps10315/data_sheet_c78-521631.html

Similar Messages

Question about Wireless Design and Controller

Hi Everyone,
Although I am not new to Cisco, I have somewhat limited experience with Wireless in general. I was hoping to get your help with the following:
We currently have a total of 8 1130AG, 4 on each floor. They were configured a few years ago, and now we are looking to update the design a bit. Each AP has its own SSID, and just provide internet access. Looking at the configuration, I noticed that they are not configured to use proper channels, just random channels (9, 10, 11, instead of 1, 6, 11, etc.). I noticed that when I roam between one AP to another, I lose about 4-8 pings before I re-establish connectivity again.
Here are my questions:
1. Do I need a controller in order to use just one SSID for the whole setup instead of the 8 seprate ones we currently have?
2. Will the controller helps in providing seamless transition when a client roams between AP's?
3. Is it normal to loose connectivity roaming around?
4. Can I reconfigure the current setup to use just one SSID and provide better transition between AP without the use of a controller?
5. Which controller would you recommend?
We don't have a need to anything fancy ,I am aware that I can enable multiple SSID, VLAN's, etc. Just trying to keep it as simple as possible, yet reliable.
Your input is appreciate.
Thanks

1. With 8 AP's only, a WLC would be nice-to-have but not necessary. You can configure WLSE and it will do some limited functions.
2. This depends on the signal strengths, wireless coverage and configuration. If you enable WLSE, for instance, and you have no wireless black spots, then roaming should be no issues.
3. See #2.
4. You can configure multiple SSID (up to 16 are broadcasted) but if one AP doesn't have the SSID you use for roaming, the association will drop when the client tries to join that particular AP. It's like mobile phone towers. If your carrier is not in the area, you sure won't be able to use your mobile phone in that area.
5. For 8 1130 APs, I'd recommend the smallest of the lot: 2106 with either 6, 12 or 25 AP licenses. I'd recommend you the 25 AP licenses. If your finances allow you something bigger, then consider either the 4402 (25 AP licenses) or the 5508.
Cisco 2100 Series Wireless LAN Controllers
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps7206/ps7221/product_data_sheet0900aecd805aaab9.html
Cisco 4400 Series Wireless LAN Controllers
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps6307/product_data_sheet0900aecd802570b0_ps6366_Products_Data_Sheet.html
Cisco 5500 Series Wireless Controllers Data Sheet
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps10315/data_sheet_c78-521631.html

Question about LakeShore 325 Temp.Controller

Hi guys,
I'm using the LakeShore 325 Temperature Controller for some measures. And i got stucked with this problem: i need to divide the ramp by segments. Which means that the ramp will not start from 0 all time. My idea is to make 1 ramp divided at a maximum of 4 segments. For ex: 1st segment from 100K to 200K, 2nd ramp from 250K to 400K, etc..
The problem is that i can't find that option on the instrument driver. It only allows me to configure the ramp, which means, that i can insert it's rate and if i'm going to have a set point or not. And the other option that is on the instrument driver is the configuration of the setpoint, that only allows me to insert 1 setpoint. What should i do? I need 2 setpoints, 1 for the minimum temperature and 1 for max. temperature.
I can't use the PID control, and i'm attaching the drivers here with 1 sketch of my main VI.
Thanks in advance.
TN
Currently using LV 8.5
Attachments:
lake_shore_325.zip ‏744 KB
new_test.vi ‏56 KB

Dear Maholtz,
First of all, I invite you to create a new thread for each new question, and to lik related topics into this new thread.
Now, about the instrument driver, the readme file clearly indicates that it is designed for LabVIEW 8.0 or later. To get version of those VIs for LabVIEW 6.1, I think you have two options:
1. Downgrade the existing version of the instruments driver using "Save for previous version" option. You will need a version of LabVIEW 8.x to downgrade to LabVIEW 8.0, then LabVIEW 8.0 to downgrade it in LabVIEW 7.1, and so on. this option exposes you to code compatibility issues, if some of the functionnality used by the LV 8.0 driver are not avilable under previous versions of LabVIEW.
2. Ask LakeShore for an instrument driver that supports LabVIEW 6.1.
Hope this helps,
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.
  CTD - Certified TestStand Developer / Développeur TestStand Certifié
  CLAD - Certified LabVIEW Associate Developer

Questions about 1003051 - TDMS 3.0 corrections - Composite SAP Note

Experts:
We, from a big SAP shop, want to set up TDMS for ERP, BI, HCM and CRM.
We have some questions about note 1003051:
1) Is this note about ERP (and HCM) only? If so, what are the notes for TDMS on BI and CRM?
2) Should we apply this note to all systems involved: sender, controller (SM7.0 in our case) and receiver?
3) We have enhp1...enhp4 in our ERP (and HCM), enhp1 on BI and perhaps enhp1 on CRM (not sure yet).
a) What is the impact of enhp on TDMS?
b) should we install TDMS before applying enhp OR the sequence does not matter?
Thanks for your help!

1) Is this note about ERP (and HCM) only? If so, what are the notes for TDMS on BI and CRM?
>This is a composite note, and contains information about various other notes related to TDMS. Refer to each note mentioned in this note individually to assess the same.
2) Should we apply this note to all systems involved: sender, controller (SM7.0 in our case) and receiver?
>Depends from note to note, Each note contains the necessary information about the system it has to be installed on.
3) We have enhp1...enhp4 in our ERP (and HCM), enhp1 on BI and perhaps enhp1 on CRM (not sure yet).
a) What is the impact of enhp on TDMS?
>TDMS in standard supports Basis 7.0 systems. However it generally works fine with 7.01 too.
b) should we install TDMS before applying enhp OR the sequence does not matter?
>As TDMS 3.0 is only available for systems with basis 4.6C to 7.0. So install TDMS first and then the EHP.
I hope these answers help.
Regards
Pankaj.

Some questions about Unity 4.0 and IPC

I have a couple of questions and I was looking for "real world" answers, not specific answers from the design guide.
1.What is this bandwidth requirement between Exchange and Unity and what is it used for?
2. What sort of issues would we experience if we placed the Unity UM Server at the Colo and placed the Exchange server at the customer premise; with a single T1 between the sites?
3.What else is involved with a Unity UM install vs. a Unity VM install?
4.Does the Unity UM and Exchange servers have to be running AD?
5. Can Unity or the Exchange box be the Domain Controller? Or does it need to be a separate server?
6. Where does a vm message get streamed from? The Unity server or the Exchange server?

No you do not pay for FaceTime. It uses your WiFi network, so if you have access to WiFi it is free.
There is no server required for FaceTime, it will use a direct device to device protocol.
I can't answer the question about using phones in different countries as that will depend on if you buy a phone that is locked to a carrier.
If you buy a phone in Germany and it is locked to a German phone network then it will most likely not work with a SIM from Turkey. You would need to buy an unlocked phone which are very expensive as they do not have any carrier subsidy applied to the price.

Question about UDP 16667

I have a quick question about UDP 16667, it is said in configuration guide that:
“IPSec encryption can also be configured for the inter-controller mobility messages, in which case port 16667 is used.”
My question is how to configure IPSec to support it? I can’t find any document describe this. Thanks for any input!

That is the only command required if you want to enable secure mobility. So UPD port 16667 will need to be allowed, but 16666 doesn't need to be since you are using secure mobility. Now depending on how your setup, you will need other ports allowed if required:
Q. What ports do I need to permit for Lightweight Access Point Protocol (LWAPP) communication when there is a firewall in the network?
A. You must enable these ports:
Enable these UDP ports for LWAPP traffic:
Data - 12222
Control - 12223
Enable these UDP ports for Mobility traffic:
16666 - Secured Mode
16667 - Unsecured Mode
Mobility and data messages are usually exchanged through EtherIP packets. IP protocol 97 must be allowed on the firewall to allow EtherIP packets. If you use ESP to encapsulate mobility packets, you have to permit ISAKMP through the firewall when you open UDP port 500. You also have to open the IP protocol 50 to allow the encrypted data to pass through the firewall.
These ports are optional (depending on your requirements):
TCP 161 and 162 for SNMP (for the Wireless Control System [WCS])
UDP 69 for TFTP
TCP 80 and/or 443 for HTTP or HTTPS for GUI access
TCP 23 and/or 22 for Telnet or secure shell (SSH) for CLI access

Questions about installing a large internal hard drive

Hello all,
I recently bought a Seagate 250GB internal hard drive for my Power Mac G4 (AGP graphics). I intend to install it alongside my old 20GB drive. I have a couple of questions about installing it:
• What kind of PCI card do I need in order to use the full capacity of the drive?
• I'm considering partitioning the drive and installing Debian Linux on one partition. Is it possible that Debian won't recognize the PCI card?
• Is it possible to connect (RAID?) the old and new drives together so that they appear as one big 270GB drive? Is this a good idea?
• What is the easiest way to copy the contents of my old drive onto the new one? I'd like an exact copy so that I don't have to reinstall the system and everything else; can Carbon Copy Cloner do that?
Thanks for any help and advice!
Power Mac G4 - AGP graphics Mac OS X (10.4.3) 768 MB RAM

• What kind of PCI card do I need in order to use the
full capacity of the drive?
If the drive is an SATA drive you need an SATA controller. If an IDE/ATA drive you need an IDE controller.
• I'm considering partitioning the drive and
installing Debian Linux on one partition. Is it
possible that Debian won't recognize the PCI card?
You should check the Hardware Compatibility List for Debian against your potential mac compatible purchases. You might also get some good information from Yellow Dog Linux compatibility lists.
• Is it possible to connect (RAID?) the old and new
drives together so that they appear as one big 270GB
drive? Is this a good idea?
If you want to stripe the 2 dives together your overall performance will be slowed down by the slower of the two drives. For example, If you have one 5400rpm drive and another 7200rpm drive, the RAID will be bogged down by the slower drive so you wont get the full benefit of the lower latencies of the 7200. You will still get some of the faster transfer times, just not the lower latencies.
Wether or not it's a good idea depends on your personal needs. Do you need a drive that can can move very large files to and from memory quickly (bandwidth) or a drive that can locate and serve up the files quickly (latency)?
• What is the easiest way to copy the contents of my
old drive onto the new one? I'd like an exact copy
so that I don't have to reinstall the system and
everything else; can Carbon Copy Cloner do that?
CCC should work fine for you. You could also use the command line asr utility.

Question about RAM CL

Hi guys. I'm finalizing my PC build and have a question about ram CL that I cannot find answers to on the tweakers page here. http://ppbm7.com/index.php/news/planning?showall=&start=3
I'd like to use these two ram sticks as an example.
Transcend JetRam™ High-Performance 8GB DDR3-1333 240-Pin Module : CL9, 6-Layer PC Board
Transcend JetRam™ High-Performance 8GB DDR3-1600 240-Pin Module : CL11, 6-Layer PC Board, Ultimate cross-platform compatibility and stability
My question is, which is better for video editing? On the one hand we have 1333mhz at with a CL of 9. On the other, we have faster 1600mhz ram, but at a higher CL of 11. Now, I'm not one to get caught up in the technicalities like it may seem, but I do want to understand these so I can make informed decisions, especially when price is a factor. In this case however, they are the same price...

From http://ppbm7.com/index.php/news/cpu-mobo
Make up your mind about the number of memory sticks you want to install. On the X79 platform, do you want to use 4 slots, or do you want to fully populate all 8 slots? This is very important especially with i7-3930K / 4930K CPU's, which have a rather finicky memory controller.
Make a shortlist of quad or octo packs of memory sticks in the size you want, limiting yourself to ONLY sticks using 1.5V or less.
Check the motherboard manufacturer's site QVL list to see which of the sticks on your shortlist are approved. Pay attention to the number of slots for which they are approved. Some modules are approved for 4 slots only, others for fully populated use.
Check the memory manufacturer's site QVL list to see which motherboards are approved.
Try to establish if there are users that have been successful in using the sticks on your shortlist and delete any that were giving trouble to others. NewEgg can be a good source for that.
Now that you have a very short shortlist, contact the Technical Support departments of both the motherboard manufacturer and the memory manufacturer and ask them to confirm or deny the compatibility of the memory modules in the quantity you need.
If both confirm compatibility, check the physical height of the modules including heatsink in relation to the intended CPU cooler. Do they fit without modding?
In general, only buy matched sets of memory sticks. There are too many different sticks with the same type number, that will cause grief when bought as four single sticks, but you limit the risk by only buying quad sets or octo sets for fully populated X79 platforms.
CAS latency is no longer important, in fact, with the finicky nature of the memory controller of the Sandy Bridge-E, it can be advantageous to choose a higher CAS latency for improved compatibility. What can be important - relatively speaking, only in single digit % performance differences - is the rated speed of the memory, 1333 or 1600 or 2133 or even 2400.
Even though the X79 platform only supports - at least officially - up to DDR3-1600, one can use XMP profiles in the BIOS to have the memory run at its rated speed of say 2133. For my new 'Monster' I followed these steps and ended up with a fully populated 8 x 8GB octo set of G.Skill RipjawsZ F3 DDR3-2133 sticks that are running without any problems at 2180 MHz.

Questions about your new HP Products? HP Expert Day: January 14th, 2015

Thank you for coming to Expert Day! The event has now concluded.
To find out about future events, please visit this page.
On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us. We hope you will return to the boards to share your experiences, both good and bad.
We will be holding more of these Expert Days on different topics in the months to come. We hope to see you then!
If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
So, what is HP Expert Day?
Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
Ok, how do I get started?
It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
What if I need more information?
For more information and a complete schedule of previous events, check out this post on the forums.
Is Expert Day an English-only event?
No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
Korean Forum: January 15th 10am to 6pm Korea Time
Simplified Chinese Forum: January 15th 10am to 6pm China Time
Looking forward to seeing you on January 14th!
I am an HP employee.

My HP, purchased in June 2012, died on Saturday. I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank. When I turned it on, I got a Windows Error Recovery message. The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything.
I'm not happy with HP. Any suggestions?

Have questions about your Creative Cloud or Subscription Membership?

You can find answers to several questions regarding membership to our subscription services. Please see Membership troubleshooting | Creative Cloud - http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html for additional information. You can find information on such topics as:
I need help completeing my new purchase or upgrade.
I want to change the credit card on my account.
I have a question about my membership price or statement charges.
I want to change my membership: upgrade, renew, or restart.
I want to cancel my membership.
How do I access my account information or change update notifications?

Branching to new discussion.
Christym16625842 you are welcome to utilize the process listed in Creative Cloud Help | Install, update, or uninstall apps to install and evaluate the applications included with a Creative Cloud Membership. The software is fully supported on recent Mac computers. You can find the system requirements for the Creative Cloud at System requirements | Creative Cloud.

Questions about using the Voice Memos app

I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
-Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
-When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
-In your opinion, how is the recording quality of the voice memos app?

You cannot import your Android voice memos to your iPhone's voice memo app. You might be able to play the Android memos and have the iPhone pick up the audio and record it.
Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
App quality is excellent.

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

HT201303 hi just got my new apple ipod touch i need to update my security information other wise it wont let me download apps it says to enter three questions about myself and i get to the third question and it wont let me enter the third question

hi just got my new apple ipod touch and to download apps it wants to add questions about myself for more sercurity information. i get up to question 3 and it wont let me select a question but it will let me write an answer so i just pressed done and then it says i cant carry on because ive mised out information when it wont let me do a question!

Welcome to the Apple community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

Just installed iOS6, questions about "iMessage" and other things...

I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Question about Mega651's IR-controller

Similar Messages

Maybe you are looking for