Question about mini dvi to vga cable

hey what up guys i have a macbook and i want to hook it up to my 27inch samsung lcd tv. i am pretty sure this will work but i was wondering how long is the cable that apple has cause it doenst say on the site i would say i need about 1 ft and a half just let me know what you can do thanks

yea i am pretty sure it has a cable for PC i know that and i have hooked the cable in it. i am pretty sure that my old pc didnt have a good enough graphics card to support brodcasiting on the tv. my question is the macbook graphics cards good enough to handle this. my other computer was like 4 years old to

Similar Messages

  • Tv wont recognize mini DVI to VGA cable

    Okay so I have a mid 2012 Macbook Pro with the Intel 4000 graphics card. I also had a Mini DVI to VGA cable from my previous macbook. I plugged it into my new macbook hooked a VGA cable to my Panisonic LED, but my TV wont recongize my computer. It won't let me change to the "PC" input unless it can recognize an input. I went into System Setting>display>arrangement and played around with no pravale. I read some previous posts about having to reset the computer with it adapter plugged in, didn't work. Does anyone have a solution?

    You need a VGA male-to-male cable to connect the Apple mini-DVI to VGA adapter to your LCD TV:
    MacBook > Mini-DVI to VGA adapter > VGA male to male cable > LCD TV

  • Mini DVI to VGA cable doesn't send signal to the projector

    I just received a mini DVI to VGA adapter cable today.
    I connect mini DVI side of cable into my Macbook v. 4.1 and connect the other side into DGA cable, which connected to LCD projector.
    When I connect the cable to my Macbook, the opened application streched out to a full screen (seems like computer detets the cable) but projector says 'no signal'.
    Can any one tell me what is wrong it is?
    Thanks much
    Mike

    I'm still stucked.
    By reading some articles, it says even using mini DVI adapter, the signal is still digital and if the projector doesn't accept digital signal then it's no use....
    My projector is Epson EX3200 and it doesn't have any DVI or HDMI input.
    Does this mean my projector doesn't accept a digital signal?
    But, but, but if even uing mini DVI adapter cable it still doesn't conver to analog signal then why they call the cable a mini DVI to VGA cable???
    Why should this world be so complecated.....

  • Mini DVI to VGA cable won't fit.  Too big for slot on 12 PowerBook G4

    Are there more than one type of cable?

    http://support.apple.com/kb/HT2369 shows only one kind of mini-DVI port for the 12" Powerbook.  Sounds like you got something that is not an mini-DVI port based cable.  Mini-VGA cables look very similar, and can be misidentified.  What are you connecting to from the Powerbook G4?  Make, model # is important.  Often DVI-HDMI adapters are better than DVI to VGA if there is an option.  Cause DVI-VGA you need a proper digital/analog converter in the cable in question.

  • Question about Mini-DVI ouput ???

    I need to connect a HDTV to my macbook for displaying pictures later today. I tried to buy the Mini-DVI to VGA adapter, but I couldn't get it here(Fuzhou, China). I currently have a Mini-DVI to DVI adapter but the TV only supports VGA. Any solution other than buying the adapter?
    Will the VGA to DVI converter work??
    Thanks in advance

    yea i am pretty sure it has a cable for PC i know that and i have hooked the cable in it. i am pretty sure that my old pc didnt have a good enough graphics card to support brodcasiting on the tv. my question is the macbook graphics cards good enough to handle this. my other computer was like 4 years old to

  • Mini-DVI to VGA cable... LCD TV has female input

    I recently bought a mini-DVI to VGA adapter from an Apple store, to connect my MacBook with a broken screen to a UMC LCD TV. When it came to plugging the VGA end into the TV, I realised it has exactly the same connector (female I think) as the TV. This obviously means they will not connect, and I haven't been able to find a connector that will do the job. I was surprised to find that after a fair amount of searching no one else appears to have had this problem, so maybe I'm being stupid somewhere here. Thanks for help.

    You need a VGA male-to-male cable to connect the Apple mini-DVI to VGA adapter to your LCD TV:
    MacBook > Mini-DVI to VGA adapter > VGA male to male cable > LCD TV

  • Mini-DVI to VGA connector resolution isses.

    Hi all.
    I have a Packard Bell 19" Monitor that supports 1440x900 75hz Resolution and bought a Mini DVI to VGA cable to connect it to my MacBook(Late 2007). When I attempt to calibrate its resolution there is no 1440x900 option at all. Ive read online that this is due to the VGA adapter? Is this true? and would I be better swapping my adapter for the mini DVI to DVI adapter (Which I would rather not use as my windows desktop connects to this thus equaling more faf.)

    VGA maximum resolution I think is about 1200 x 800. If you want 1440 x 900, DVI to DVI would be the best way to achieve this. KVM switches, and A/B boxes exist for DVI that would allow your PC to share with the MacBook the display.

  • Mini DVi to VGA colour issues

    Hi,
    I recently purchased a projector to connect to my macbook. My intension was to use a mini-dvi to vga cable to do this, however when i connected everything up the projected image had a green tint. I must also state that i have connected a TV to the same port with a mini-dvi to s-video adaptor with no problems with the colour.
    My first thought was that the cable was the problem, so i borrowed my friends macbook to see if they had the same problem. There where no issues, so if figured it was either a software or hardware issue.
    My next step was to boot off the start up disk and plug the projector in, same issue - green tint.
    So i have concluded that it is a hardware issue. I know that the mini-dvi port is connected directly to the logic board, if i want to get this fixed will i have to replace the whole logic board or is there another way.
    All your help comes much appreciated.
    Thanks in advance
    Bob

    Hi DoDolom,
    First, welcome to Macintosh!
    Secondly, it sounds to me like what's happened is that OS X has extended your desktop onto a second monitor. Plug in an external mouse and keyboard and then close the MacBook's lid. It will go to sleep. Use the external mouse/keyboard to wake it up and you should be running on just the external display.

  • Mini DVI to VGA issues w/ LCD HDTV

    I have looked all over and I can't find a solution.
    I recently purchased an LCD HDTV, Insignia Brand which is a Best Buy Brand, and I bought a DVI cable to hook up to my Powerbook G4 using the Mini DVI to VGA cable. When I hook it up to my tv it works, but the screen on my Powerbook looks magnified as does the LCD TV. When I launch Safari or any other program it doesn't fit on my screen or the LCD TV and I have to resize it.
    After I look at displays in system prefernces it says my max resolution is 1024 x 768.
    Any help would be appreciated.
    Jeremy

    Just guessing - the TV's "VGA" input is limited to 1024x768, which is possible although some "VGA" inputs will work higher. Do the instructions mention a limitation like this?
    I think if you turn off mirroring on the Powerbook, at least the Powerbook screen will have normal resolution, and the TV 1024x768. The TV apparently scales up image to fill the screen unless using HDMI, where is leaves the extra 342 pixels blank on the sides (1366-1024). Perhaps the TV has a mode for adjusting how the TV handles lesser resolutions (stretch, dot-by-dot, etc)

  • Mini-dvi to vga problems.

    Hello,
    I recently bought a min-dvi to vga cable and tried to connect to my tv. The TV is relatively new and supports hd. However, when I click detect displays, the mac doesn't recognize the tv. The tv turns on for a split second and says 'no signal'. Then it goes of, and I have no second monitor. Can anyone help me?

    If the TV has an HDMI connector (it should if it's a recent HDTV), you should use it instead of VGA. HDMI will keep the signal all digital from the computer to the screen. VGA is analog.
    If your iMac is a model before the current 2009 model, you can get something like this to go from mini-DVI to HDMI.
    [PTC Mini-DVI to HDMI Adapter with 6ft HDMI Cable|http://www.amazon.com/gp/product/B001H0REVK/ref=s9subs_gw_s0_p23_t5?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=07SX5KQPE80BYX6 0XD8Z&pf_rd_t=101&pf_rd_p=470938631&pf_rdi=507846]
    or this one if you have or want to get the HDMI cable separately
    [Mini-DVI to HDMI Adapter|http://www.amazon.com/Mini-DVI-to-HDMI-Adapter/dp/B001PVUIL4/ref=sr16?ie=UTF8&s=electronics&qid=1242504557&sr=1-6]
    (there are other listings on Amazon)
    The iMac should properly recognize the HDTV over HDMI.

  • DVI to VGA cable disables trackpad

    Used the mini dvi to vga cable for months with no problem. Today i plugged in the DVI and the track pad was disabled - could not use track pad at all. Additionally when i select system preferences and display the display is automatically reverted to 800 resolution. Searches suggest that I go in to system preferences and display and select arrangement to use mirror mode - but when i go to displays arrangement is not an option. Perhaps this is only available when the dvi is plugged in, but alas when i plug in the mini dvi to vga i cant do anything as the trackpad is disabled.
    I dont know what happened, what changed or how to go back to where i can simply plug in the mini dvi and watch downloads on my TV -
    Very frustrated

    Welcome to the Apple Discussions!
    It sounds to me like you have a defective Mini-DisplayPort to VGA adapter. I would call AppleCare Support or take the adapter in to a local Apple store or Apple Authorized Service provider to have it checked out.
    -Doug

  • Mini DVI to VGA Adapter w/ extension cable

    I would like to get a Mini DVI to VGA Adapter for my macbook. Does anyone know how it would would if I used it with a VGA extension cable. Any experience will be helpful

    Depends on how long the cable is, and if it was of sufficient quality for computer use. The higher resolutions require better quality and shorter cables. You may get some signal loss for long cables. A standard monitor cable that comes with a computer monitor should be fine, but what kind of length extension cable are you talking about?

  • Mini dvi to VGA adapter to HDMI cable

    i have a mini dvi to vga adapter for my macbook (bought in 2007) and that works but I want to connect to hdmi cable to this? But don't exactly know how to do this or if it is possible?

    It is my understanding that 'VGA' is analog and HDMI is digital....from what I have read it won't work without a convert
    I use a Mini DVI to DVI adapter and then a DVI to HDMI adapter to run the HDMI cable to to TV
    the converter...VGA to HDMI...
    http://www.vgatohdmi.net/
    Mini DVI to DVI
    http://store.apple.com/us/product/M9321G/B?fnode=MTY1NDA3Ng&mco=MTA4NDU1MTM
    DVI to HDMI
    http://store.apple.com/us/product/TR842LL/A?fnode=MTY1NDA3Ng&mco=MTA4NDU1Mjk
    Personally I would shelf the VGA adapter and go with the new cable set up...if you already have the HDMI cable then an adapter from DVI to HDMI would be in order

  • IMac Adapter Out Questions (Mini-DVI to VGA)

    Hi everyone,
    I've got a 2.4ghz C2D 24" iMac. For two years I had the iMac hooked up to my LCD tv via this route: iMac -> Mini-DVI-to-VGA adapter -> 75' VGA Cable -> LCD TV. I recently upgraded my TV, and no longer have a VGA port on the TV. I'm not looking to replace any cables because it's quite costly, and at this point in my life I'm not willing to spend that much to replace the setup.
    My new TV has a DVI-D port on it. This is a very random connection, and yes, it is DVI-D (NOT DVI-I or DVI-A). What I'm wondering is if I get another adapter, a DVI-D male to VGA female adapter, will the iMac recognize the TV? I'm not sure how the video card treats the exterior Apple Mini-DVI to VGA adapter and am wondering if a simple $5 adapter will suffice.
    Any help or information regarding this would be great.

    That is a common adapter and it works, but the way it works is digital-to-analog. In other words, you plug the male DVI end into your computer and the female VGA end into the VGA cable (which then goes to your monitor/TV/whatever). Unfortunately it would not work if you went DVI(Mac)-to VGA cable-to DVI(TV) because it cannot convert the analog signal back into digital.
    Those adapters are handy to have anyway so you could always buy one and try it out, but I'm sure you'll just get a blank screen (or the dreaded "no signal" message). Sorry

  • What is the correct cable for iMac 11,2 Intel core i3, mini dvi to vga or mini display port to vga?

    What is the correct cable for iMac 11,2 Intel core i3, mini DVI to VGA or mini display port to VGA to hook up to projector? Thanks!

    mini-DisplayPort.
    Regards.

Maybe you are looking for