Question about moving chat and call history

Downgrading to an older version from the newest version of Skype. The older version is not supposed to support the horrendous formatting *the bold text between stars* and such. However, I have heard that when you downgrade, the formatting STAYS and the only way to get rid of it permanantly (without having to input a command every single time you start Skype up) is to completely reset Skype's settings by renaming the appdata directory and letting a new one be created. Of course, this means your chat history and such is in the OLD folder, not the new one.
My question is this:  If I do this reset, then move my chat history from the old folder to the new one so that said chat history is restored to Skype, will the unwanted formatting return WITH it, or will that still be disabled?
Solved!
Go to Solution.

Yunimori wrote:
Yes, but from everything I've seen, that doesn't actually fix the problem, it only works until you restart Skype or your computer. I am looking for a permanant solution; aka something I only have to do ONCE, not something I have to RE-DO every time I restart Skype/computer.
Temporary is not a solution. Permanant is. Thank you.
This was only an issue with the early 7.0 Skype version. The solution is permanent with the older Skype 6.21 version as well as with the latest Skype 7.1/7.2/7.3 versions.
http://community.skype.com/t5/Windows-desktop-client/Switch-off-Bold-and-striked-text/m-p/3840004#M3...
The chat command /setupkey *Lib/Conversation/EnableWiki 0, has exactly the same effect as editing the shared.xml file.

Similar Messages

  • The question about portlet customization and synchronization

    I have a question about portlet customization and synchronization.
    When I call
    NameValuePersonalizationObject data = (NameValuePersonalizationObject) PortletRendererUtil.getEditData(portletRenderRequest);
    portletRenderRequest.setPortletTitle(str);
    portletRenderRequest.putString(aKey, aValue);
    PortletRendererUtil.submitEditData(portletRenderRequest, data);
    Should I make any synchronization myself (use "synchronized" blocks or something else) or this procedure is made thread-safe on the level of the Portal API?

    HI Dimitry,
    I dont think you have to synchronize the block. i guess the code is synchronized internally.
    regards,
    Harsha

  • How to transfer SMS and Call History from Iphone 5 to Iphone 6 plus? Only the contacts, calendar, safari bookmarks and notes have synced.

    Hi! Please help. I have synced my IPhone 5 to Itunes. When I try to sync it to Iphone 6 plus, only the contacts, calendar, safari bookmarks and notes have synced to the latest date. The rest like SMS and Call History have only synced to June 2013.

    I upgraded from an iPhone 4S to iPhone 6 Plus, I don't like to run iTunes, and iCloud backup is not so reliable, I think. Then I searched on the Internet, and some articles told me that I can directly transfer data from Phone to iPhone with some tools.
    I doubt it first, then I gave a shot on one of them for the free trial. I follow the steps to transfer about 200 sms from my 4S to 6 Plus, and it works!
    Got this from here: http://www.cultofmac.com/296711/transfer-data-new-iphone-6-imazing/
    Hope this helps!

  • I deleted a contact out of my iPhone 4S but when I go to send a message the contact appears although that individual is no longer in my address book. I deleted all text and call history pertaining to the deleted contact but still shows up.

    I deleted a contact out of my iPhone 4S but when I go to send a message the contact appears although that individual is no longer in my address book. I deleted all text and call history pertaining to the deleted contact but still shows up. Does anyone have the same issue and how do I fix it?

    dam122577 wrote:
    but wont restoring as new delete all my info on my phone
    Yes. That is why I added...
    it will disappear over time due to non-use.

  • Question About Color's and Gradients

    Hi all,
    I have a question about color swatches and gradients.
    I am curious to know, if I have 2 color swatches that I make into a gradient color, is it posible to change the tint of each indivdual color in that gradient and have that applied to the gradient without having to adjust the gradients opacity.
    The reason that I'm asking this is because in creating a project I found that the colors that I chose for to make my gradient from my swatches were to dark, and while I can adjust each one's tint to my liking (if the object they were applied to was going to be a solid color) but that doesn't seem to apply to the overall gradient.
    I hope that makes sense, I know that this was something that was able to be accomplished in quark and was wondering if I can do something similar.

    If you double click your gradient swatch (after adding it to the swatches)
    Then click a colour stop in the gradient, and then change the drop down menu to CMYK (or rgb)
    And you can alter the percentages there. It's not much use for spot colours but it's a start.
    But making tint swatches would be a good start anyway.
    At least then when you double click the gradient (in the swatches) to edit it you can choose from CMYK, RGB, LAB, or Swatches and adjust each colour stop to your liking.

  • Question about clear page and reset pagination

    Hi,
    I have a question about clear pages and the reset pagination in an URL. What is the reason why a clear page doesn't also trigger a reset pagination on the pages which are cleared?
    I can't really imagine a business case where it makes sense to clear all data of page items on a page and don't reset the pagination of reports on that page which probably use a page item in there where clause...
    The drawback of this behavior is that a developer always has to set the reset pagination checkbox when he clears the target page and the even bigger drawback is that if you specify other pages to clear, you can't reset pagination for them, because reset pagination only works for the target page.
    Thanks for your input.
    Patrick
    *** New *** Oracle APEX Essentials *** http://essentials.oracleapex.info/
    My Blog, APEX Builder Plugin, ApexLib Framework: http://www.oracleapex.info/

    Enhancement request filed, thanks,
    Scott

  • A question about item "type and release" of  source system creation

    Hello expert,
    I have a question about item "type and release" of  source system creation.
    As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
    About the item "type and release",when we push "F4" button,there will be three default selections as below:
    "ORA 115     Oracle Applications 11i
    TLF 205     Tealeaf 2.05B
    XPD 020     SAP xPD".
    Who can tell me when and how should I use the three selections.
    And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
    Thank you and Best Regards,
    Maggie

    Hello DMK,
    Thank you very much for your answer.It is very helpful for me.
    Can I ask you further about it?
    I got that it is a semantic description item.
    You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
    Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
    Thank you and Best Regards,
    Maggie
    Message was edited by: Maggie

  • A few questions about the ka790gx and dka790gx

    i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

    It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section.  There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
    As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
    The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
    """Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
    Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
    The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
    For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
    Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
    It's better than nothing, but only just."""

  • IPhone Questions - iMessage and Call History

    Very new iPhone user.  I think I'm getting bad information so I have the following questions
    1. Can you set your iPhone so that the iMessage history deletes automatically after a few minutes (as opposed to say 30 days)?
    2. Is it possible that only part of an iMessage history on an iPhone would be deleted automatically? For example, if there was a conversation/thread then 10 minutes later there was an addition to the conversation/thread, would it be possible for the first part of the conversation to be deleted but not the second part to be deleted automatically or would it have to be done manually?
    3. Does regular call history (no iMessage) delete upon a reboot of the iPhone?
    Thanks,
    Mark

    Hi,
    The most frequent automatic deletion timeframe you can set is 30 days. If you have 30 days selected, then once the 30 day threshold is reached, messages threads that exceed that threshold will be deleted.
    Call history does not delete on a reboot. If you restore your device to Factory Settings and do not restore it using a backup, call history will be deleted.
    Cheers,
    GB

  • Question about using threads and synchronizing objects

    Hi all,
    I am not that familiar and I have 2 questions.
    QUESTION 1
    I have a server which just sits and accepts incomming connections, then I spawn off a new thread which implements Runnable, and then call the run method. But the loop would not iterate, it would just sit inside the run method (which has rather long loop in it). I changed the class to extend Thread and called the start() method, rather than run(), and everything worked out fine.
    Anyone know why this is?
    QUESTION 2
    So I am building a client server chat application where a user can be in multiple chat rooms. I have this personObject which has output/input streams. In the personObject, I create writeObject/ readObject method, which simply does as it implies.
    I figured that I should make these methods synchronized, to ensure things run smoothly. however, when I made a call to readObject, which sat there and waited, and then made a call to writeObject, I would not enter the writeObject method. I took out the synchronized on the writeObject, and everything worked out fine.
    I was under the assumption that synchronizing a method only synchronized on that method, not on the whole class. How come then was I not able to enter the writeObject method?
    The more I think about it, I don't think I need to have these methods synchronized, but I thought it wouldn't hurt.
    Thanks for the help.

    Hi all,
    I am not that familiar and I have 2 questions.
    QUESTION 1
    I have a server which just sits and accepts incomming
    connections, then I spawn off a new thread which
    implements Runnable, and then call the run method.
    But the loop would not iterate, it would just sit
    inside the run method (which has rather long loop in
    it). I changed the class to extend Thread and called
    the start() method, rather than run(), and everything
    worked out fine.
    Anyone know why this is?
    You should still implement Runnable, rather than extending Thread. Like this: Runnable r = new MyRunnable();
    Thread t = new Thread(r);
    t.start(); run() is just another method. Nothing special about it as far as multithreading or anything else goes.
    start() is the method that actually spawns a new thread of execution.
    I was under the assumption that synchronizing a
    method only synchronized on that method, not on the
    whole class. How come then was I not able to enter
    the writeObject method?When you synchronize, you obtain a lock. As long as you hold that lock--until you exit the sync block or call wait()--no other thread can enter that block or any other block that obtains the same lock.
    Two synchronized methods on the same object rely on obtaining the same lock--there's one lock for each object.

  • A quick question about WebDynpro SLD and R/3 with concurrent users

    Hello ,
    I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3  for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
    - I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
    Thanks Ubergeeks,
    Guy

    Hi Guy
    You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because  a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
    For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
    Regards
    Pran

  • How can I transfer text and call history from an iPhone 5 to an iPhone 6 Plus?

    I just received the iPhone 6 Plus today.  In moving information to it from my iPhone 5, I discovered that my text history, call history, and voicemail history haven't been transferred.  I had synced the iPhone 5 to iTunes and then synced the iPhone 6 Plus to iTunes.  But, since the operating system on the 6 Plus was newer than the 5, iTunes made me treat the 6 Plus as a new phone instead of just backing up the old phone.  How can I transfer the call, text, and voicemail history?

    Make a backup of the old device and restore the new device to that backup. You will get an exact duplicate of the old phone.

  • Some basic questions about foriegn key , and relationships.

    Hi
    Thank you for reading my post
    I read some documents about foreugn key and tables relation ships.
    but i still can not understnad some stuff.
    1-when we have a foreign key , we have two tables that we want to relate them together
    in a way that one of ? table columns forced to be a value from ?? table column.
    what is name of those two tables , i saw , child-parent , ..... which confuse me.
    can some one please tell me correct name of those two tables ?
    2-some times we need some kind of master details relation like :
    one-to-many : i this case MANY table will have a column to point a record in ONE table , can this relation be a foreign key relation ?
    3-we can achieve many-to-many relation only by using a helper table to host both tables primary keys in a record to relate them together.
    can you point me to some resources that help me to find answers to this questions ?
    or explain them to me ?
    thank you for your time.

    These are critical database basics that you need to understand. I would seriously recommend getting some study in, because proper relational database design relies on the basic principle of data and relationships and a process called normalization.
    In reality, you only really need one gigantic table to host data. It would include everything you would want to know about something - let's take a sales order for example. You would have to record the customer's name, address, etc. along with every item they ordered, etc. You would have a HUGE table full of data that appeared over and over and over again. This is bad design for two basic reasons: it is difficult to query, and it is very easy to have minor mistakes like capitalization or alternate spellings that prevent things from matching up properly. For example, let's say Bob orders 40 widgets and 40 digits. In our hypothetical table, we could put it in as Bob - 40 widgets and Robert - 40 digits. See how confusing this can get even in a simple example? And let's say you wanted to correct all of Robert's orders to say Bob and you found out there were 40 orders from "Robert" How would you know which ones to change?
    The process of normalization helps to reduce the chance for these types of errors in addition to creating a good basis for indexes. You normalize the data by creating sets of parent/child tables with a "key" value to match them. In our hypothetical situation, you could create a table for orders and a table for customers. In the customers table you give all the detail for the customer in one place, and you assign each customer a unique number or ID. In the orders table we add the customer ID (NOT the name) and we ensure that we are getting the customer we want, in addition to saving a lot of space and eliminating redundancy. In our example, the customers table is the "parent" table and the orders table is the "child" table. The child table references the unique entries in the parent table via that id. That reference is referred to as a foreign key. The foreign key in the child table points back to the original and complete record in the parent table and eliminates the redundancy of keeping all that extra data for every order. Foreign keys in child tables always refer to a primary/unique key in the parent field.
    That help?

  • Backup sms contact and call history to pc

    Hello ,
    I got the nokia 920 based on the camera hype at the time of it’s first unveiling. To my surprised it turned out my old Galaxy S2 took better pictures in my opinion.
    Here is my question, I am trying to backup my entire phone (has to be sent in for repairs led light died) and **bleep** to my surprised the most common and convenient way for me to backup my previous phones, which is to plug it into your pc and backup “everything” is not listed.
    With the pc option on the phon app it only allows me to save my photos, vids and music. I cannot comprehend why Nokia/MS did not add the option to save/backup sms, contacts, app settings and phone call history option to your pc. At some point and time MS/Nokia had to make a decision of phone users to backup your most personal information using their cloud, all the while forfeiting you from having the option of saving it to your “personal computer”. Let me think…hm it cost a lot of money to buy and maintain the cloud servers they use, and as far as I can tell you don’t pay a single cent, unless you want more cloud data ….ask yourself what’s in it for the perverted F**Ks. I think most of us won’t allow a stranger to just walk right up into your house and begin to observe your eating habits, tv shows you watch etc. Don’t tell me either that only you can access your info…it’s simply **bleep**.
    Why am I being forced to use the “cloud” why would I want my personal info on someone else’s machine. I do not own the server and do not have admin rights. If they had advertised you could not conduct a simple backup of everything via pc, I would never have gotten this phone. I like the ability to choose/have a choice especially after paying $600 for a phone, just to have MS/Nokia to make the decision for me.
    I can understand why some people would want to use the cloud, but not everyone should be forced to use it.
    How do I back up contacts, call history, sms messages to my pc without being fingered in the cloud, against my will.
    Thank you for your time

    it is a wp8 device, so go into your settings/backup
    and choose to have all that backed up to your ms account you have on the device.
    this will back up your sms/phone log info and your contacts (so long as you are saving your contacts to your live account)
    if your contacts are synced to another account, like google/etc. then that should be synced as well.
    when you log into your new wp8 device, and start to set it up, use the same MS account you currently do and it should automatically connect and restore your sms/contacts (provided you use the MS account)
    as for the applications...you can go to windowsphone.com and click on reinstall next to the apps you want to reinstall in your "my account"
    if those applications do not save a file to the skydrive or their own server, then i cannot say how that data would be backed up.

  • Question about moving a site

    This isn't a Dreamweaver question, but you guys have been
    great help in the past. Perhaps you can help me here.
    I have a customer, WC, who had a site through one of these
    'template' companies. I have redesigned his site. His domain name
    is registered through Network Solutions. If I leave the domain
    registration with Network Solutions but CHANGE his hosting company,
    will anything (settings, Cnames, MX records, etc) need to change on
    their Microsoft Exchange server? They no longer have a network
    admin, and I'm not familiar with Exchange. I don't want to risk
    crashing their email for a day!
    Thanks!
    Brady

    > Thanks Murray... I had talked to GoDaddy about moving
    both my hosting
    > account
    > AND the domain, and they indicated that it could cause
    problems for a day
    > or
    > so.
    This will only be true if you are not using an exchange
    server. When I do
    this for non-exchange server domains, I always have the
    clients set up a new
    email account that grabs incoming email from the new
    mailserver, while they
    also continue to get it from the old one. In the 72 - 96
    hours it takes to
    be really sure all DN servers have propagated, they will
    receive email from
    both locations. After that time, they can then cancel their
    original
    hosting account, and remove the associated email account.
    > Will I have to set up all of their email addresses again
    after moving the
    > hosting account?
    No - not if they are using an exchange server.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "bradyg23" <[email protected]> wrote in
    message
    news:efj8et$oe0$[email protected]..
    > Thanks Murray... I had talked to GoDaddy about moving
    both my hosting
    > account
    > AND the domain, and they indicated that it could cause
    problems for a day
    > or
    > so.
    >
    > Will I have to set up all of their email addresses again
    after moving the
    > hosting account? Or are they maintained on the Exchange
    server? (In the
    > past
    > with non-Exchange businesses I moved, it was simply a
    matter of updating
    > their
    > Outlook settings).
    >
    >
    >
    >
    >
    quote:
    Originally posted by:
    Newsgroup User
    > I think you are safe. That's one of the really nice
    things about using an
    > exchange server....
    >
    >
    >
    >

Maybe you are looking for

  • Security Breach on the Ubuntu Forums

    So apparently the ubuntu forums got hacked and someone made out with 2 million usernames, passwords and email adresses- ouch! Their site is currently down. Just posting as an FYI because their advice is to change your password if you have an account

  • New Google Earth does not run on my 24" iMac

    This morning I downloaded and installed the new Google Earth 4.0.2 beta on my 24" iMac. GE loads but crashes as soon as I attempt to navigate to any where. Now I am trying to download the previous version 3 from Google but it just downloads the newes

  • IOS6.1.2 downloaded but won't install. I get an error message each time that states I am not connected to the Internet but I am. Any ideas?

    I downloaded the update just after it came out but it wouldn't install. It is in the software update section in settings but I can't install it. When verifying I get an error message saying that it can't be installed because I am not connected to the

  • Applying patch on RAC seetup

    Dear all, Tomorrow i need to apply a bug fix patch on my RAC Set up database.For that please tell me the step by step process , how to apply it. it is 2 node RAC. Database version : 10.2.0.4 OS:linux rhel5 i have couple of doubts on it. 1)For patch t

  • Question on locked audio regions

    I saw a Logic 7 video a few days ago in which a locked audio region had its start point dragged to the right. This process shortened the region but left the new region with exactly the same bar/timecode position as before. I don't seem to be able to