Question about moving system board from domain C to domain B SF2000

Hello,
i would like to move the system board e this is my configuration:
Domain A with Domain B Solaris 10 Sun cluster 3.2
Domain C Solaris 10 no Sun Cluster.
I move the sytem board SB7 from domain C to domain B with the command from System Controller:
# moveboard -d B -r 2 -t 900 SB7
This command can be done during normal operation and it's totally transparent to Sun Cluster domain A-B.
Thankls

The subject line of your post mentions a "SF2000".
Could you actually mean you have a Sunfire E20K ?
[http://sunsolve.sun.com/handbook_pub/validateUser.do?target=Systems/SunFireE20K_R/SunFireE20K_R]
If yes, then I suggest you contact your local Sun Support Center and open a proper support case.
Get assistance from engineers specifically available for such expensive systems.
This is just an anonymous user-to-user discussion forum.

Similar Messages

Question about moving a project from FCP to Premiere to do color correcting/sound finalizing.

My friend and i have been editing a film on FCP express. I've been learning more about editing and color correcting recently and have been teaching myself on Adobe Premiere. I offered to color correct the film on Premiere on my system. I'm curious what the best way to do this would be. is it possible to take the timeline from FCB with the raw data and somehow open that in CS? Or should he export the pre corrected final cut without correcting as a certain type of file, then I work on that, then export that as the final cut?

If FCP express has XML export, then you can export the project and then import the XML into Premiere Pro. It will give you the basics of the timeline and basic transforms for each clip (position, scale, rotation). However, not everything comes across - titles and 3rd party effects will not come across.
Given that, another option is to render out the entire movie and then grade it in Premiere Pro. But you lose a lot of control if you go that way.
The third option is to import into Premiere Pro and rebuild the bits you might be missing from FCP and then you have both the control and options.
Hope this helps,
Dennis

Several questions about moving iPhoto library from PowerBook G4 to Mac Book Pro.

Hello,
So yes I was running an old PowerBook G4 laptop, had moved my iPhoto library onto a 2 TB external hard drive so I could free up space on my laptop. Now that I have a new Mac Book Pro, I decided to move the library onto it. Everything seems to have moved ok, except there seems to be a bunch of duplicates, some even have multiple copies. Now this is me looking at the events, and even the names are duplicated.
Can I safely remove and delete the duplicates, or is this just showing me the same photos / events / whathave you?
Also, I noticed when looking at the photos under library, the index shows a close up of any face that is in the photo. Is there any way to turn that feature off so I don't have to look at the same photo taking up a ton of space? Makes it harder to figure if I have duplicates.

decided to move the library onto it. Everything seems to have moved ok, except there seems to be a bunch of duplicates, some even have multiple copies
How did you move the library to the new MBP? The correct way was to connect external HD with the library to the MBP and just copy the library into the Pictures folder. Launch iPhoto with the Option key held down and select the newly copied library and open it.
At no time should one library be imported into another. That created multiple duplicates and creates a real mess of the library.
OT

Question about operating system

Hello.
I just got lenovo T400. I have question about operating system. I choose OS (Windows XP Professional preinstalled through downgrade rights in Genuine Windows 7 Professional). When I get the laptop, Windows XP is preinstalled but I don’t know how to upgrade to Window 7. Please, tell me the way to upgrade.
Have a nice day

you'd need the disks, and would need to do a fresh install, i.e. you can't just upgrade it. everything will be gone
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

Question about moving a site

This isn't a Dreamweaver question, but you guys have been
great help in the past. Perhaps you can help me here.
I have a customer, WC, who had a site through one of these
'template' companies. I have redesigned his site. His domain name
is registered through Network Solutions. If I leave the domain
registration with Network Solutions but CHANGE his hosting company,
will anything (settings, Cnames, MX records, etc) need to change on
their Microsoft Exchange server? They no longer have a network
admin, and I'm not familiar with Exchange. I don't want to risk
crashing their email for a day!
Thanks!
Brady

> Thanks Murray... I had talked to GoDaddy about moving
both my hosting
> account
> AND the domain, and they indicated that it could cause
problems for a day
> or
> so.
This will only be true if you are not using an exchange
server. When I do
this for non-exchange server domains, I always have the
clients set up a new
email account that grabs incoming email from the new
mailserver, while they
also continue to get it from the old one. In the 72 - 96
hours it takes to
be really sure all DN servers have propagated, they will
receive email from
both locations. After that time, they can then cancel their
original
hosting account, and remove the associated email account.
> Will I have to set up all of their email addresses again
after moving the
> hosting account?
No - not if they are using an exchange server.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"bradyg23" <[email protected]> wrote in
message
news:efj8et$oe0$[email protected]..
> Thanks Murray... I had talked to GoDaddy about moving
both my hosting
> account
> AND the domain, and they indicated that it could cause
problems for a day
> or
> so.
>
> Will I have to set up all of their email addresses again
after moving the
> hosting account? Or are they maintained on the Exchange
server? (In the
> past
> with non-Exchange businesses I moved, it was simply a
matter of updating
> their
> Outlook settings).
>
>
>
>
>
quote:
Originally posted by:
Newsgroup User
> I think you are safe. That's one of the really nice
things about using an
> exchange server....
>
>
>
>

Question about source system copy for BW

Dear all,
I have a quick question about copying a source system for BW.
We have two clients in the source ERP:
100 Customizing
200 Testing
Our BW is only linked to client 200, so when we now delete client 200 and make a copy from 100 to 200, are we then still able to restore the source system connection so that our extraction will work, or will it fail, as in client 100 I have no BW related (except the cross-client-objects like datasource) information, that can be used for a possible restore of this connection.
What is the procedure in this case?
Thanks,
Andreas

Unfortunately, you will lose your source connection and need to create a new one in R/3. You can use the same source system name in BW, but check the source system connection after the copy (SM59). Also, I would "Restore" the source system (in BW, right-click on Source system in RSA1, and click "Restore") to insure the datasources get replicated from R/3 to BW.
Depending on how much you want your BW and R/3 systems to be in synch, you will need to rebuild all your data providers (cubes/ODS's) from your R/3 system. This means deleting all the data and running the initializations from scratch. At the very least, you will need to rebuild the delta queues.
Curious, if 100 is just for customizing, is there any data in it? Are you just creating a new blank client 200?

DW CS4 Question about Moving Content to New Site

Hi,
I'm supposed to meet with a client later about creating a new website and moving all content from the old to the new. Right now, I have no idea how many pages the old one has. I'm assuming the worst, which means I'm assuming there will be a lot of pages.
So after I create a new home page and then a new secondary page, is there some kind of automated procedure Dreamweaver CS4 has that will help me quickly get all of this old content into the new content? I'm hoping there is because I really want to avoid having to go to each old page, copy the content, and then paste it one by one. As I think about this, though, if suppose the old site has 100 pages, I guess I'll have to create 100 new secondary pages, then somehow get the content of each of these 100 pages into the new 100 pages.
Any help is appreciated.

I agree. I'm thinking it will probably be easier to start from the ground up. My biggest fear is it will be 5,000 or 10,000 pages. And from what I understand (I'll get more specifics at the meeting) the job must be done by 10/27/10, which leaves precious little time.
I'm meeting with the client this week so as of right now, they cannot show me the existing site until the meeting.
Mike
designerandpublisher.com

Quick question about making system calls

hello all
i have a simple quick question regarding making system calls. Basically I want to mimic the command "system" for perl. I am not quite sure how to do this for java.
any feedback would be appreciated.

look at:
java.lang.RunTime

Question about speaker system

hi guys hows it going? I got a question about the creative inspire 5.1 P5800. So far I got the front and center speakers working, and the sub woofer. But i've tried everything to make the rear speakers work and they just wont work!! Think anyone can help me out with this problem? Thanks in advance.

alfredo,
What sound card are you using? If you are using Creative card, try turning on the CMSS feature. You can check out the Knowledgebase article for the steps.
http://us.creative.com/support/kb/ar...p?l=2&sid=4883
Jason

Questions about "Restore System From Time Machine"

Looking to fix an apparent system corruption problem on my work machine, I discovered the "Utilities > Restore System From Time Machine" option of the Leopard installation disc. I have some questions that are not answered in http://support.apple.com/kb/HT1177:
1. Does this option erase the hard drive and install a fresh system from DVD, or do I need to do that in a separate step?
2. What about software updates - when are they applied?
3. Will third-party system extensions be reinstalled OK?
4. I tried launching the process on my home machine, just to see how it works. At work I have a dedicated disk for Time Machine, but at home I have a Time Capsule, serving two Macs via Ethernet. I've also configured the TC to give us a shared volume; so in normal operation I have two network volumes, <Username>, containing Time Machine's sparsebundle file for that user's Mac, and "Shared". When I boot from the installation DVD and run "Utilities > Restore System From Time Machine", the backup volume list only shows the "Shared" volume. If I select it, I'm prompted for my TC username and password; I enter it, TC spins up, and then nothing. I cannot continue the restoration process, and reselecting the "Shared" volume does nothing. ???
Thanks in advance for your help.
-- Phil

For the record, here's what I've found out so far:
1. The "Restore System From Time Machine" option seems to want to restore everything, including the system, from the Time Machine backup. I wanted a clean system install, so I did an "Erase & install" followed by a "Restore from Time Machine" in the Migration Assistant. That got me most, but not all, of my settings back; exceptions include the printer configurations, the desktop picture, and the Dock settings.
2. Software updates can be applied after the new system is rebooted.
3. Most 3rd party extensions seem to have been restored OK, but some (like MacFuse) were not.
4. I'd still be grateful for any hints concerning how to get "Restore from Time Machine" to work with a Time Capsule.
-- Phil

Questions about moving from Mobile Me to iCloud

I just upgraded my iPhone to iOS5 and am curious about the move to iCloud for my mobileme account. I know there are articles out there, but they seem very generic and do not put my fears to rest.
Here are my questions and concerns. I figure they will be easy for a lot of you to answer, but I need to pose them before I make the jump.
1.) Do I need Lion to move to iCloud? (from the articles I read I'm pretty sure the answer is yes, but I thought I'd clarify)
2.) I have more than one mobileme account that has calendars and mail synced on my computer. If I upgrade one account do I have to upgrade the other at the same time for iCal and Mail to work?
3.) My husband's mobileme account syncs his work calendar. It is very important that I don't lose his information and that his calendar works flawlessly after the upgrade. Has anyone run into problems with the calendar syncing? I will not move anyone's accounts if iCloud is still experiencing a lot of bugs. I will of course make a backup copy of his calendar before upgrading, but his calendar changes often and is synced to two iMacs, a Macbook Pro, Mac Mini, an iPad and an iPhone it will not be practical to keep track of his calendar and if it is syncing properly.
4.) How do I actually make the switch to iCloud once I make up my mind to do it? My Phone told me to sign into me.com to do this, but when I signed in I didn't see how to say that I wanted to use the iCloud. Maybe this is because I haven't upgraded to Lion yet?
Thanks!

I am curious about the comment you can only use one iCloud account at a time. Right now I have my moblieme calendar and my husband's mobileme calendar both visible in iCal. That is very convenient for us because then he doesn't have to open up a separate user on the iMac just to check his calendar (this is our home computer that is mainly mine). Are you telling me that I won't be able to use both CalDAV accounts in iCal anymore? Will it force me to use only one?
Most of our music and videos was purchased under my .mac account, so iTunes isn't a problem, but we like to share one user on the computer and still be able to see both our calendars and e-mail.

Question about moving music from an iPod to your computer.

In my household, we have iTunes on three different computers. My mother downloaded music on my brother's computer, and it's on his library. We want to burn a cd with the purchased album, but his computer does not have a cd burner, but the other two do. Is there a way to move music from one computer to another, or possibly moving music from an iPod to a computer's library?

Music is synced to iphone from itunes.
Plug in iphone and select whatever you like to sync from itunes to iphone.
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

Quick Question about Moving from iPod Touch 2G to iPhone 4

I've had an iPod Touch for just over 2 years and am planning to get the Verizon iPhone 4 as soon as it is released. Does anyone know if I will be able to move all my apps with their data to the iPhone? For example, I have a weight watcher type app where I have been recording what I eat, weight loss, etc for months. I'd like to bring that information with me. Plus my game scores and levels I've beaten, etc. Before, when I have plugged in a new device iTunes has asked me if I want to restore data from my iPod 2G backup or from my iPad backup. If I do that, will it give me the desired result?

Ignore the previous post, as it's quite obvious the poster has no idea what they are talking about. App data is stored in your touch backups. Restoring your new phone from that backup will restore the data to your new phone. Follow the directions here:
http://support.apple.com/kb/ht2109

Question about moving all iTunes data from one computer to another.

I have a Windows XP. Now I have a windows 7. All of the songs from the XP are available on the new computer via a Z drive. But when I plug my iPod into the new computer it says that it is registered with a different library and asks me if I want to delete all the songs and apps and replace them from the ones on the new library. I don't want that to happen. And all of the apps on the old computer aren't available on the new one. How do I get the apps from one computer to another, and how do I sync my iPod on the new computer without erasing all high scores, app data, songs, and other information? And how do I get a song fro the new computer back to the old one?
Devin

This is the way I would normally recommend that you migrate your library from one computer to another.
Backup the library with this User Tip.
Restore the backup to your new computer using the same tool used to back it up.
Deauthorize the old computer if you no longer want to access protected content on it.
Keep your backup up-to-date in future.
If you have content on the new computer that you want to add to the library on the old one then copy that across via network/memory stick etc. before attempting to migrate the library again.
tt2

Question about 865PE Platinium board?

hey guys,
can anybody help me in good operation of 865PE Platinium board, i first started it, i heard large amount of noise from CPU fan i thought it would be finished soon but no progress then i installed MSI Corecenter and the sound died, that does mean MSI Core center works good right and one more question i installed latest MSI Live Update 3.6 version it came with live monitor what does live monitor do ? i mean live update not live monitor ?
any way the main question is i found that my CPU temperature is 51 C and system is 41 C is this temperate ok i mean if i turn on the Air Conditioner no affect neither room fan although there is no direct sunlight or anything and the other fact that i am living in a city which is very hot like 45-49 C usually . so what do i do i got two fans in the system one is power fand and the other is additional heat deciptation fan but the CPU is hot why? i have the following system
2.40 Prescott CPU
865PE Platiunium board
256 Kingston 400 Mhz single chip
MSI Geforce FX 5200 T128 (64bit) cause that was only available
i got a stabimatic stabilizer 500 V ok and i got monitor of Philips 14 inch with direct power cable to the CPU not seperate power only from CPU.
i proceed by turning the stabilizer on then monitor and then CPU cause big burden on the power of the monitor
help me out guys

I'll say, prove your uncle wrong then . I have my MSI 865PE Neo2 and MSI FX5950Ultra(see my signature below) running for 1 yr 6 months w/o any problems.
First of all, I just want to tell you that your NB chipset only comes with a NB heatsink w/o fan, so corecenter will report N/A on NB fan. Next corecenter will only detect the fan speeds from the CPU Fan and NB Fan(if any) that's connected to the 3 pin SFAN connector.
SpeedFan is definately a better alternative if you decide to switched detection utilities but the same goes for speedfan utility, where it'll report N/A if nothing is detected. It doesn't matters how many fans you have in a system, when it comes to detection of Fans and Fan Speeds, it totally depends on what is actually connected to the correct connectors.
Next, if you want a stable airflow within the system, you've got to try placing the inlet fans near to the bottom of the chassis and the exhuast fans near the top rear of the chassis. Too many fans isn't good, a 3 fans system will do just nice to maintain good airflow in and out.
You may want to refer to the Mobo Burnt Prevention Guide under my signature to get some ideas on what are the areas that could burnt a mobo/hardware/system down.

Question about moving system board from domain C to domain B SF2000

Similar Messages

Maybe you are looking for