Question about MP3-Disc

How can I make a mp3 disc with each music cd in another directory ??? Example I have ' got cd1 with song 1 and song 2 , another cd : cd2 with song 1. The name of the first directory is cd1 with the 2 songs and an another directory "cd 2" with song 1. Can somebody help me ?? Itunes did it 1 time. But I don't know how.
Wim

podsorcerer wrote:
I currently have two dell computers one laptop and one desktop. I am planning on going to get a new Mac laptop this weekend and i had a question about the windows install disk that came with the computer i already own. the disk is distributed by dell and says only for installation on dell systems. could i use this to install windows into boot camp on my new mac, or will it mess up the bios and such?
It won't work. Dell only supplies recovery CDs. They have the hardware needed for the Dell and that's it. I would also guess that it does not have SP2 incorporated into it. You could mess up your Mac, but it would not install so why even bother with it?
You need the full XP with SP2 embedded or Vista CD or DVD. Anything less won't work.

Similar Messages

  • I have a question about MP3 recorders but cannot even get contact us to work

    My question is are the recorders in the Zen MP3 players mono and are they a .025 kHz?
    However, I am disturbed that none of the links to "contact us" work is this a typical problem with
    Creative? If not, how do I reach someone preferably by phone, but even by e-mail when I have a question about a product and even worse if I buy one about a problem thanks

    As far as I know the "contact us" links are some sort of guided tour to some documents that might help, and otherwise an e-mail form. I don't know if you can phone them, but you can e-mail them and for general questions there is this forum.
    The X-Fi 2 saves recordings as IMA ADPCM 6000Hz mono 64kb
    ps.
    I'm not sure about other Zens, although I believe they all are mono, I think my Vision recorded in regular wave (uncompressed PCM) but since I don't have that one anymore I can't check.

  • Basic  question about MP3 format

    This is really simple (if you know how) but how but how do I convert a MP3 Disc so that I can play it on my ipod that needs MP4? Many thanks!

    You don't need to convert. iPods handle mp3 just fine.

  • Question about MP3

    I have MP3's on my computer that I have converted to (AAC) and I want to burn them to a disc from iTunes. Can you do this? If so, how?

    Yes you can do this with iTunes. If you want to make a audio CD to play and listin to just make a playlist of the songs you want and then hit the "burn" button at the top right corner of iTunes.
    If your wanting to make a data CD for backing up your AAC songs, goto preferences in the edit menu and select the sub tab "Burning" under advance. there you can switch it from burning audio CDs to burning Data CDs

  • A simple question about mp3's in a Flash music player

    I have a music player for a Flash site that I'm working on that plays 3 mp3's.  Right now it just has some short sound loops, but I find them repetitive and annoying.  I'd like to replace them with mp3's of full songs.  Is it ok to add 3 mp3's of songs that are like 3 minutes long and are 128 kbps or will those be too big of files?  The mp3's are all between 2 and 3 mpgs.  Is it better to try to find ones at say 64 kbps?  Or is there a way to bump them down to a smaller size just for the player but still get decent sound quality?
    Thanks!

    Valeriy,
    Please provide some more information about the technologies you are using to build your application in order to get some appropriate help.
    For example, if you are using ADF BC/ADF Faces, I will say, "please read section 25.8 of the ADF Developer's Guide for Forms/4GL Developers," which describes how to do this using those technologies.
    Obviously, if you're not using ADF BC, then it's not much help... so... help us help you; what technologies are you using.
    John

  • Questions about recovery discs and partitioning Satellite A200-QH0

    I bought a Satellite A200-QH0 model in Australia and due to lack of forums in our country I'd like to ask some questions here if that's ok.
    The notebook contains 3 partitions - a 1.6GB "EISA Configuration" partition, the large OS partition, and the recovery partition. So I've made the recovery DVD??s using the Recovery Disc Creator tool as we aren't supplied with an actual disc. But I would like to know what these discs will do? My questions:
    1. Will they truly return the hard drive back to _exactly_ how it was including the partition layout and pre-installed software?
    2. Will the recovery DVDs work even if the drive has been repartioned? I would like to split the system partition to give space for data files etc. But will this extra partition stop the recovery procedure working properly?
    Please understand that I'm not interested in reformatting the entire drive. I just want to split the OS partition. But in case I have to replace the drive in the future or something I'd like to know how close to "original" these discs will get me, no matter what I do to the drive?
    Thanks,
    Dave

    Hi
    Im not 100% sure how the recovery works on the Toshiba Australian notebooks but I presume the Recovery CD contains the Toshiba image with the Windows OS, drivers, tools and utilities.
    I think if you would use the Recovery CD then the whole HDD will be formatted and all partitions will be erased.
    I think the recovery partition will be not created using the recovery CD because the recovery CD was already created so the recovery partition is not necessary anymore
    Regards

  • Sound in FCP - Questions about MP3

    Hi
    Which is the best way to convert MP3 to AIF file ( 48HZ & 16 bt) ?
    (The sound that i am using in my project, i have it only in MP3 it's specific and i can't change it.)
    Write now i make it with Adobe Audition CS6 - is it OK? or its best to do it with  Compressor? The quality is the same or not?
    I am asking all of them because my project  export sound is  on 5.1 (for DVD)  and for the music  i put every file  to Pan Mode to Stereo Left/Right in order to have better perfomance but when i do that the music sounds very low!! The rest of the sound(effects etc..) its sounds very good!!
    Do i have other solution? or i am making something wrong?
    Please give me your guideness...... 
    Thank you!!!!

    Don't know about that. Good conversion to AIFF should be identical. I don't use Audition but I've never had a conversion lose sound level.

  • Question about mp3 file stor

    i just bought a creative gb zen nano plus. just wondering if i take it over my friends house to get a 700mb .avi file do i have to install the software on his computer or will it show up as a jump or flash dri've.he all has software on his computer for a sansa mp3 player & his phone and says he dont want to install any more software which i understand. thanks in advance

    That will depend on what type of OS he is currently using. If it's Windows 2000 and higher, you don't need to install any driver to work with the player.
    Jason

  • Question about mp3 fi

    I was just wondering if defragmenting your computer would affect the quality of music files since the computer moves them to a different location on the hard dri've. I know converting files decreases quality but I'm not too sure about defragmenting.

    Defragmenting won't hurt them since you aren't changing the files, just the physical locations of the data.

  • Question about MP3 players in Ital

    Hello!I'm an italian boy!I have some problems with my micro zen mp3, there are italian people in this forum?i'm not speak english very well!!help me help me thanksMessage Edited by Catherina-CL on 06-20-2006 09:48 AM

    Rather than waiting for some Italian to respond, it's a good idea to try your best expressing your problem by writing it down here. It doesn't have to be a perfect english

  • QUESTION ABOUT MP3S

    when converting to an mp3 from a wav file , does the mp3 lose alttle clarity?

    I must add: it's better to work (read: mix and bast
    of all record) your stuff at 96kHz samplerate, 24bit.
    When possible of course. This way you don't loose too
    much data when mixing.
    For the complete explanation see your reference
    manual p 288.
    Hi,
    I usually test what I am going to records first...before deciding on sample rate...i.e. an electric guitar doe snot contain any info much above 15,000 Hz..so there is no point in recording it at 96kHz(48,000 hertz being the limit on that),just a lot of zeroes added on to make the file bigger,not better.
    Also a LOT of microphones especially old ones do not pass audio past 15-18kHz either,so again,why record a source that does not give you anything above 20kHz??? I keep asking this,and people keep telling me they "hear" the difference...
    I have been tested by an otolaryngologist (ear-nose-throat doctor) and he proved to me I can listen all the way to 26,000 Hz...
    So when I cannot tell the difference between a source at 44.1kHz and the same one at 96kHz,it's not because I'm deaf...which I'm not,it's because THERE IS NO DIFFERENCE...the spectral content is the same...
    Cheers

  • HT201364 Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont k

    Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont know how.  It tells me lets say i have 30 GB movies but i dont have anything ! Can you help me with any way ? If i can do something to see what movies let's say means !  
    Thank you !!

    Hope this helps.
    1. Empty Trash.
        http://support.apple.com/kb/PH10677
    2. Start up in Safe Mode
        http://support.apple.com/kb/PH11212
    3. Delete "Recovered Messages", if any.
        Hold the option key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Mail > V2 > Mailboxes
        Delete "Recovered Messages", if any.
        Empty Trash. Restart.
    4. Repair Disk
        Steps 1 through 7
        http://support.apple.com/kb/PH5836
    5. Disk space / Time Machine ?/ Local Snapshots
       http://support.apple.com/kb/ht4878
    6. Re-index Macintosh HD
       System Preferences > Spotlight > Privacy
       http://support.apple.com/kb/ht2409
    If this does not help, you have to buy an external HD and move your movies photos.etc to
    the external HD.

  • Question about Charging ZEN MP3 Pla

    Hello, I just got a brand-new ZEN 4GB MP3 player. I have a question about charging it. Is the device done charging when the battery icon blinking in the top-right displays as full, or should I be waiting for some other indication (done charging message, etc.)?
    Thanks,
    Brett

    The icon should be a full bar with a little plug in the middle when it's fully charged.

  • Questions about using the Voice Memos app

    I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
    -Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
    -When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
    -In your opinion, how is the recording quality of the voice memos app?

    You cannot import your Android voice memos to your iPhone's voice memo app.  You might be able to play the Android memos and have the iPhone pick up the audio and record it.
    Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
    App quality is excellent.

  • Receiving "internal error" when trying to burn mp3 disc from playlist

    I'm trying to burn an mp3 disc from a playlist that I've created. Unfortunately, I keep getting an error. I'm currently running iTunes 11.0.2 on my iMac which is currently running 10.8.3.  I've done this many times before, and this is the first that I've had this problem. Here's the error I keep getting:
    The attempt to burn a disc failed. An internal error occured.
    If you want to retry the current failed burn, click on Retry. If you want to go to the next disc burn, click on Next. Otherwise click on Cancel.
    Here's how it goes down:
    I've created a very long playlist which will require the use of multiple discs.
    I right-click on the playlist and select to burn the playlist to disc.
    I then get the usual burn settings pop-up menu where I select the "MP3 CD" format with a preferred speed of "Maximum Possible"
    Note: Since experiencing this error, I have tried varried speeds ranging from 8x to 24x; I still get the error.
    Note Also: I have tried selecting "Audio CD" instead, and the playlist will burn and the error does not appear. This is not an option I want to go with, however, because of the length of the playlist — it would take, like, 25 discs...
    For a moment iTunes will read the disc, then ask permission for the playlist to be split across multiple discs. I say "ok".
    At this point, iTunes will say that it is initiallizing for about a split second then immediately say it's finalizing and spit out the disc. This is when the error pops up.If I select to "Retry", it doesn't retry to burn; it just saves a .txt file to my desktop that is  a copy of the error message. There's no error code/number or anything, though - just the exact same message. "Cancel" and "Next" seem to behave correctly, though.
    I have tried repairing disk permissions and restarting my computer. I've also tried using different brands of CDs: Memorex CD-R and Innovera CD-R. The error persists.
    Any help on this issue would be greatly appreciated. Thanks in advance!

    Some people (for reasons I don't know) have problems with Dynamic Link
    What happens if you export MPEG2-DVD from Premiere Pro... import the 2 files (audio and video) into Encore... and do ALL of your authoring work in Encore?

Maybe you are looking for

  • Why can't I recieve or send mail on my macbook pro? Mail works just fine on iphone4

    The account comes up with a little warning triangle by the name of the account, when I click on it this is the first message : There may be a problem with the mail server or network. Verify the settings for account "@rogers.com" or try again. The ser

  • The screen of iphone 5s turn to red!

    I would like to ask about why is my iphone 5s screen suddenly turn to red and it is very hard to turn off ? I also cannot turn it on. I am from Vietnam so I cannot go to the Apple stores to solve this issue. Are there any suggest for me? Thanks you!

  • Printed Photos color very saturated

    When I print this photo: on photo paper on my Photosmart C309a Series, the color is too saturated.  and yet when I print on plain paper the photo looks fine. The photo paper used is HP Premium and the ink is HP.  The print quality report looks OK: Wh

  • Display Templates based on Roles

    Hi, I have a requirement in which i need to display different template based on the user roles(eg : Manager, Clerk ..) .Is it posible?? Thank you

  • Runnable v/s Thread class.

    Hi ya Folks, Any MAJOR difference between using the Runnable interface or extending the Thread class? Which is more beneficial.?