Question about MSi Drivers

Why is it that the 53.03 drivers from msi installs winsys.exe into the registry so it resides in memory? I belive this code is a keylogger Win-spy parasite.
The strange thing is, that with winsys activated my result on 3dmark2001se is 13200+, with it diabled the result drops to 12700.
Anyone else noticed this??

Thank you ever so much for the help, my mind is put at rest now!!
BTW what do you think of my powersupply is it good enough for a geforcefx 5900 ultra?
Also is the performance for my setup about right with 13200+ 3dMark2001se & 4170 in 3DMark 2003?
Thanks again Glennvidia
Mike.......

Similar Messages

Question about MSI K8N SLI Platinum

i have a question about this mobo.
my previous msi boards had a feature where if u overclocked too much, and the system couldnt handle it, it would load the default settings in the bios. I really liked this feature and am wondering if it will be present in this board.
is it?

sorry m8 after that post i double checked and i thought you were talking about neo1 - didnt notice the SLI bit . i think a couple of others got caught by that one too.
so i did some investigating:
it uses the same award phoenix bios 6.00PG as neo1 and 2. every board i have owned since kt266a fom various manufacturers with that bios has had that feature. plus the insert key trick even works on a lot of 486 and early pentium 1 machines. i am still 99% sure it will put it that way.

Question about MSI 865 PE NEO3-v

could you help me , please
I ask about msi 865 PE neo3-v mainboard
does it support cpu type :Pentium D 820 (2.8GHz ,95w) (dual core)
and can I get the full performance of this cpu (dual core) on this mainboard without problems?
Because your site tell us that this mainboard is support cpu Pentium D 820 (2.8GHz ,95w) on this link
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=654&NAME=MS-7097&kind=1
pleas help me before I buy the cpu
1.Product Type: msi 865 pe neo 3- v
2.BIOS version: 1.xx (PCB 1.0)
3.External VGA Type: Nvidia GF fx 5500 128 AGP
4.CPU Type:Pentium D 820 (2.8GHz ,95w)
5.Memory Type:512 mb twinmos DDR1 PC 400
6.Power Supply Type:P4 lga 400 watt
7.Operating System:winxp pro sp2
8.Problem Description: does this mainboard support cpu type Pentium D 820 (2.8GHz ,95w) (dual core)
and can I get the full performance of this cpu (dual core) on this mainboard without problems?
thank you for helping

Look at this: http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=654&kind=1
Quote
Pentium D (65nm, Presler, Dual Core, FSB800, L2 Cache 2x2MB)(B1 version)
Pentium D 920 (2.8GHz ,95w) 800 14 OK
Pentium D 930 (3.0GHz ,95w) 800 15 OK
Pentium D 940 (3.2GHz ,130w) 800 16 OK
Pentium D 950 (3.4GHz ,130w) 800 17 OK
Pentium D (64-bit, Smithfield, Dual Core, FSB800, L2 Cache 2x1MB)
Pentium D 820 (2.8GHz ,95w) 800 14 OK
Pentium D 830 (3.0GHz ,130w) 800 15 NO
Pentium D 840 (3.2GHz ,130w) 800 16 NO
Pentium D (64-bit, Smithfield, Dual Core, FSB533, L2 Cache 2x1MB)
Pentium D 805 (2.66GHz ,95w) 533 20 Under testing

Question about installing drivers on Vi

Hey,?Within the next couple of weeks, I intend to purchase a?X-Fi Fatalty FPS card. I know the Vista drivers aren't up to scratch at the moment, but I'm in no rush to upgrade to Vista, although I have access to the RTM through TechNet. As soon as all drivers are of a good standard then I'll upgrade - until then I'd stick with XP which works great. My question is this, If I buy this card it'll ship with a driver CD. I'll need to install the drivers/creative applications from this CD and then update them from the website. The drivers on the disc will be for Windows XP, and not compatible with Vista. When I format the dri've and install Vista, how do I go about installing the Creative Vista drivers. The downloadable ones from the website require the main CD drivers to be installed, which I won't be able to install as they're for XP. Hope that makes sense. Thanks.

Ooh, perhaps I got the wrong end of the stick then. Im basing this on my experience with an old Creative Audigy card I had years ago, but If memory serves me correctly it was actually an OEM card. So what you're saying is, when I receive my X-Fi, I can not use the CD and straight away download the latest drivers/apps from the creative website and install them without needing to run the CD through first?Thanks for your reply.

*Solved* Question about ATI Drivers

Ok, I'm just finished installing, and I know most distro's, ask you to remove the open source drivers, before adding in FGLRX drivers. Looking at the wiki, I didn't noticed if this needed to be done, and after going through the install, I rebooted. It went as planned until kdm went to load. The screen was unreadable. I used the cd media to mount root, and removed catalyst, and re-installed the opensource drivers. All is well atm, so I'm trying to figure out what I missed. My question atm though is during the FGLRX install, it ask's if you want to removed the opensource drivers due to conflict. If I hit yes, will pacman it automatically remove the required drivers, or do I need to manually remove the Fx86 drivers on my own?
I do apologize for not having a /etc/X11/xorg.conf report, as it slipped my mind while fixing everything. I'll try to make a better habbit of getting it made. I did do a aticonig --inital before the reboot, so i know it won't that.
If I missed anything on the wiki, please let me know, I'll look again at it after dinner.
Thank you all for your time in the matter.
Last edited by bigcountryva (2012-09-30 01:01:49)

Silex89 wrote:
Hi there
First off, which installation method are you following? (ABS using the AUR package, the unofficial repository or the AMD installer). Depending on which method you use, you'll have (or not) a resolved dependency. For instance, you have to remove both the open source driver and your former xorg.conf file (safer is to back it up) to be able to install Catalyst with the AMD's site installer.
If you use AUR (with a tool like Yaourt for example) or the repo method, pacman/yaourt should do it for you, but in a lot of cases it doesn't (I switched to Catalyst having my OpenBox session built already, so when I tried to remove the open source driver it complained about all of the apps that I had installed for removing a dependency like libgl or mesa) and you'll have to do a pacman -Rdd xf86-video-ati to make it work
I'm wondering if you remembered to add the mkinitcpio hook (which is needed to make Catalyst work).
What I would suggest is to re-read the wiki page for Catalyst, see if your card is still supported by Catalyst, maybe your card needs Catalyst-Legacy...
Best of Luck with that
I figured it out, and got it working. I had a typo adding the module for flgxr driver. Fixed it and a soft boot later, all is well. I also deicided to make it so I have to "startx" into my gui, incase this happens again, I won't need the installation media. Thanks for the input.

Question about MSI NX7300GS-TD256E

Hi Everybody.
I know this not something one should ask. But I would like to ask what is the difference between MSI NX7300GS and MSI NX7300GT? Second I would like to know something. My brother tells this problem is because my Graphic card is MSI and my motherboard is from Asrock. Now I don't know much about this. But sometimes my computer just switch off and switch on again and when I start Windows it tells me that it has been restored from a problem. Now my brother tells it is because of the Graphic card. Can a Graphic card do that to a computer? Or can be something else. My mother uses Northbrigde and southbrigde from VIA. And he said it is not something that one likes to have on ones motherboard. Can that do what I said? And can one change ones graphic card after some time? Like can I change my MSi NX7300GS to a MSI NX7300GT? Or should one take another card? Like 7600GT? I usually don't play much games since I am not very found of games. I hope someone can help me with an answer to these question.
Yours
Krille70

Quote from: krille70 on 30-June-06, 04:04:00
My brother tells this problem is because my Graphic card is MSI and my motherboard is from Asrock.
That statement from your brother shows he does not know anything about computers. Ignore it.
Take Care,
RIchard

Questions about MSI FX5600-VTDR128

Hi,
I'm considering purchasing the MSI FX5600-VTDR128 graphics card, but I have a few questions that I wondered if anyone could help me with. First, has anyone had major problems with the card? Also, I wondered if the tv-out feature would work using only rca composite cable because I do not have an S-video port on my tv.
Thanks

I'll be honnest... it might not be a good purchase if you are a gamer. You can find other MSI card doing better.
The major problems i've seen is:
- Slow for games
- IRx application for the remote control have serious
memory leak and i don't know if MSI really care about
that. People yell about that in every forums but
there's simply no MSI answer! You often have to
kill this task and throw the remote control in the
garbage if you don't want to loose memory.
I'm acutally loosing 8k per second. Any programmer
from MSI forgot to do a "MyObject = Nothing" after
a "MyObject = New Something()"??? Common, it's easy
to find this problem. it take exactly 8192 bytes...
someone can find where you ask to the OS to give you
8K of ram!? ANSWER MSI!!!!!
- Media Center reset your screen to 1024x768 with a
screen refresh of 60Hz!!! Each time you get out of
Media Center, it keep that stupid resolution.
(Everybody yell after that too in the forums, this
is crappy programmation).
Of course like the moderator said... satisfied customer never come to write on the forums. But to be honnest, not every customer are computer Wiz and many customer think that it's normal to reboot a PC every 1-2 hours... "It's normal, it's just a PC after all"... lol. Common! The problem is that the PC works FINE! The bad programs doesn't! And it's not normal to find such an untested software on the market!
Hopefuly, thoses who make hardware only are more serious and test their stuff before selling them.
And to finish, you asked if it was able to work with an RCA because you don't have an S-video yet. I would say, yes because there's an adaptor with 2 plugs of each (input/ouput, for s-video and rca).
I've not been able to make mine work yet... i'm trying to find out what's wrong. mine is plugged onto my video RCA output. I setup my video to send the signal on the rear RCA plugs but the Media Center just get nothing! But i'm sure there's something i didn't understood. It's the first time i try to watch tv on a comp...
hope this might help to make your choice.
Quote
Originally posted by ksu_fan
Hi,
I\'m considering purchasing the MSI FX5600-VTDR128 graphics card, but I have a few questions that I wondered if anyone could help me with. First, has anyone had major problems with the card? Also, I wondered if the tv-out feature would work using only rca composite cable because I do not have an S-video port on my tv.
Thanks

Some questions about MSI K8N Neo4 Platinum nForce4 Ultra

Hi to all!
First of all sorry for my bad english :P
I have some questions regarding this motherboard that i would like to buy.
I've red some times ago that nForce 4 chipset had a bug with the HyperTransport (or similar) so all the motherboards with this chipset were post-poned. Now the german MSI site has posted a press-release of the MSI Neo4 saying that mass-volumes distribution will be in mid december.
I would like to know if some Neo4 were distribuited before nVidia found the bug and (if so) if there's a method to identify the "good" from the "bugged" versions.
The second question is about the possible heatsink. I would like to install a Zalman CNPS-7700 AlCu (with 12x12 silent fan) but I dunno if the heatsink "dimensions" could create problems to some motherboard component.
Thanks!

Hi to all!
First of all sorry for my bad english :P
I have some questions regarding this motherboard that i would like to buy.
I've red some times ago that nForce 4 chipset had a bug with the HyperTransport (or similar) so all the motherboards with this chipset were post-poned. Now the german MSI site has posted a press-release of the MSI Neo4 saying that mass-volumes distribution will be in mid december.
I would like to know if some Neo4 were distribuited before nVidia found the bug and (if so) if there's a method to identify the "good" from the "bugged" versions.
The second question is about the possible heatsink. I would like to install a Zalman CNPS-7700 AlCu (with 12x12 silent fan) but I dunno if the heatsink "dimensions" could create problems to some motherboard component.
Thanks!

Questions About MSI Z87-GD65 System fan Currents!

Hi,
I have a few questions on the MSI Z87-GD65 System Fan currents. I want to hook up 2-4 120mm case fans together through a PWM Female to 4 x PWM Male Computer Case Fan Splitter and connect it to one of the SYSfans on the Motherboard, but I am unsure about the current limit on the SYSfan1-3 on the motherboard. Also I was unsure if I needed to have a 4-pin connector or 3-pin connector. On the online manual it says that for Sysfans1-3
Pin #1 is Ground
Pin #2 Is Speed Control
Pin #3 is Sense
And Pin #4 is NC
What does NC mean? Do I need a 3 pin or 4 pin connector?
Thank You For any assistance!

NC isn't used.
The sys fans you only need to get a 3 wire fan for the cpu fans a 4 wire fan would be indicated.
The amp rating is 1amp I believe.
If you want to really control and monitor your fans, it is best to use an outside fan controller. I use the Corsair Link in one of my computers which I like, but is overkill.

Questions about MSI K8T NEO FIS2R

I've just got the board and updated to the latest bios, everything is ROCK STABLE with my HyperX 3500 ram at rated timings( a suprise since ive read that they wouldn't!).
Now the questions:
1. After update to 1.2 BIOS the temp in BIOS appeared as 64 degreas C! CoreCenter says 30 idle as before.....EDIT: After yet another restart the temp is back to normal in BIOS?!
2. In version 1.1 I noticed that the vcore options were available upto 1.625 now with this BIOS ists 1.55V.....I saw that the BIOS contained some vcore settings updates, but never thought that this would be it.....
So far very impressed with the board, installation was easy and the system is rock solid from day 1.....

1.2 BIOS puts the max vCore to 1.55 just like you said, and after your BIOS is cleared at first boot up you will always get a bad temp reading, only after a restart will you get the correct temp reading. It is quite annoying when you are building with this mobo for the first time but I figured it out after I tightened my timings to much and had to reset the BIOS about 15 times, looking for the best performance possible. It would be nice if MSI fixed that temp problem.

Question about Via drivers

I've been using PCs since '94 but am still learning....
How do I know if my system has the latest Via 4-in-1 (4.43.) drivers installed? I'm using OS WIN ME....
Thanks in advance....

maybe it is possible to use the program 'msi live update 2' to check which via drivers you are using at the moment and which are the newest to download according MSI.
you can download the program here http://www.msi.com.tw/html/support/liveupdate/main.htm
after download/install you can use the program to check which via driver is the newest online and by the way you can see which via driver you are using at the moment.

Some questions about MSI Z97M Gaming before I buy...

First question is, there seems to be some issues with updating firmware, whats the issue of using M Flash thats built into the BIOS? I was reading the sticky and it's talking about making a boot disc to do it. Also how is the Killer NIC? Once again I see a lot of problems with it here on this forum. I prefer Intel NICs but i'm willing to give something a chance. Last question, can the LED audio accent lighting strip (the one for the audio) be turned off? I downloaded the PDF manual and it didn't say anything about it.
Thanks for your time guys

The BIOS comes with the BIOS + ME update for that BIOS version and if you do use M-flash make sure to use Update BIOS and ME option....
Quote from: badboy2k on 02-September-14, 05:19:25
3: no idea... (it may be possible but i just do not know)
I do not have one of those boards so I do not know
Quote from: JLio01 on 02-September-14, 15:53:26
Also, you could turn off some of the LEDs including the audio strip under BIOS settings. I have the same LED stripe on my MB, I believe it's the same design and can be turned off.
like this guy said if its like his it can probably be turned off (my quote: (it may be possible but i just do not know)) in the BIOS settings somewhere but you would have to go section by section to find it (I do not see why they wouldn't have some option to disable it but it may be a little tricky to find and probably in some obscure sub menus under lighting or chipset features or something)!

Questions about JDBC-Drivers

Hi,
I'm working with JDBC-Drivers for the first time.
How can I get detailed information about the database, subprotocol etc. the driver supports. In ODBC there exist some information functions like SQLGetInfo to explore drivers. But there seems to be no way to do this with JDBC.
Can anybody give me some advice how to get this information ?
J�rgen

Hi,
after instantiating an object implementing the Driver interface I want to know what database this driver works for. If possible, this should be done without connecting to the database. I supposed a driver should store such information in itself but there seems no way to get this information.
The Driver interface declares a method 'getPropertyInfo' to extract information about the possible properties for this driver. Unfortunately I didn't found any description what lookup strings can be used.
Do you know how to go on ?
Thanks and regards
Jugi

Satellite C50-A-571 -Two questions about Toshiba drivers download

Hello all , great day .. how is it doin?
I'm new to this forum , it's good to be here hoping will find solution to every problem we facing
My first question is : why the drivers download from "http://www.toshibamea.com/" is so slow and limited or something? , it never finish downloading , I'm always having connection interrupted when trying to download a driver, isnt there other mirrors or something?
Second question:
why is there so many unnecessary drivers ? like I set all my preferences, product type, family,model , series ... and it gave me 33 driver , and some of them aren't drivers for my laptop
I have a Satellite C50-A-571 notebook

Hi and welcome
Im not some expert but Ill try to offer my answers.
1/
As far as I know support page you use is offered for Middle East and Arica. I don't know where is the server placed but download should not be problematic. In the past I used it few times for drivers check and everything was OK. Maybe is there some problem with your Internet connectivity.
Toshiba support and download page is definitely not limited and can be used anytime you want.
2/
Ive checked download page and found 33 results for Win7 64bit so I presume you want to install this Windows version.
Anyway all listed stuff are not just the drivers but also useful Toshiba specific tools and utilities. This tools and utilities control some special useful special features like special keys functionality or HDD protection.
I can just recommend you to install all of them and have full control over your machine. Of course if you don't like or don't need some of them they can be disabled or removed from the system.
I hope my opinion is useful for you. If you have more questions you are welcome.

Question about msi k9nu neo V !

hello to everyone!i have a little question for you guys.i have bought a msi k9nu neo v motherboard and a athlon64 3500+(orleans core),and know here comes the question.if y buy ram memory wich runs at 800 mhz it will work fine with my processor?plaese help me with this!

The motherboard works with the DDR2 800 so there should be no problem. It may not run at its maximum rated speed in your system but should work otherwise.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=739

Question about MSi Drivers

Similar Messages

Maybe you are looking for