Question about multiple containers in PFAC rule

Hi,
I´m new working with PFAC rules. I created a Z rule with two parameters in container for an agent determination.
I´m making tests in simulator entering different values. When I enter a valid value in one of the two parameters, simulator return the agents.Obviously,when I insert a valid value for each parameter the rule returns agents too. My question is, what I have to do to make the rule return agents only when I insert correct values in the two parameters? I mean one correct value for first parameter and one correct value for second parameter at the same time.
I want to avoid the rule returns agents when only one parameter is informed.
Thanks in advance,
Pablo.

Hello,
Could you confirm that you're using a responsibility rule?
If so, it all depends how you have set it up. If you have listed all of the possible values then leaving one of the parameters blank should return no agent at all. If you have used '*' then that will match everything, even nothing. What sort of settings did you use?
regards
Rick Bakker
hanabi technology

Similar Messages

I bought a Canon 8400F scanner- question about multiple photos being scanne

Hi,
I have a question about about scanning photos. It was posted that if you scan something with multiple photos, it will separate the pictures.
If I put 6 pictures on the scanner, will it automatically scan them and separate them, or is there something in the software where I select it to separate each picture.
Thank you

I'm not at my Mac right now but it should be real obvious in the CanoScan software. Open it up and play around. It will jump out at you.
You don't tell it to select "each" picture. You merely tell it that there are multiple pictures and it then does everything automatically.

Questions about OLE containers

Hello,
I try to use an OLE container for save any type of documents, the majority are Microsoft Word (*.doc), Acrobat Reader (*.pdf) and images (*.jpeg, *.jpg, *.bmp, ...)
I prove to insert a document an save it in the database and all works fine. The document is saved in a BLOB column, and if I try to activate the OLE container I view the document correctly, but I have questions about OLE container:
1.- Once I saved the document into the database (the icon of the document is shown into the OLE container), if I query the database to retrieve the documents, the OLE container not shown the icon of the document, and if I try to activate the OLE container, making double-click, it doesn't make anything.
I think that the query to the database don't retrieve correctly the documents into the OLE container.
2.- Once I saved the document into the database (the icon of the document is shown into the OLE container), if I try to activate the OLE container, depend the document I need to do twice double-click to open the document.
If I try to open a Word document (*.doc) it need one double-click to activate, but if I try to open an Acrobat document (*.pdf) it need twice double-click to activate.
Why? How can I open any type of documents with one double-click?
3.- The form that I develop will work in client-server and in web mode.
The problem is that if I try to run the form into web mode with OLE container, I have an error:
"FRM-92100: Se ha interrumpido la conexiÃ³n con el Servidor. Puede ser el resultado de un error de red o fallo en el Servidor. Debe reestablecer la conexiÃ³n", and if I click in Details I have "Java Exception: java.lang.ArrayIndexOutOfBoundsException ...".
If I delete the OLE item, it works fine, and I don't have any errors.
I know that OLE container doesn't works in web mode, because this I will develop this functionality with JavaBean, but I would like that in client-server mode works with OLE container.
There are any way to do this, that in web mode doesn't has this error, and in client-server mode works with OLE container?
Thank you very much
Jordi

2. If you use Time Machine you can't browse those pictures on the Movable DIsk. It's not designed to work like that.
3. Don't use copy and paste, try drag and drop instead.
You don't tell us how you are managing these photos. I suggest that you use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the everything. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

Question about multiple application modules.

Hello,
Suppose I have 2 database schema’s. For both schemas I have 1 application module. All view objects are in the same project.
For each application module I have an application definition.
Is it possible to link between these two applications? Because sometimes these database schema’s link to each other and you would like to jump from one application directly to the other.
For example you have orders locates in 1 DB schema and customers in another DB schema.
You would want to jump from the order directly to the customer details in the second schema.
Is this possible? Or do I need to make nested application modules etc?
I can find very little info about this; the JHS def guide does not offer much information about multiple application modules etc.
-Anton

Anton,
Yes, you can jump aroundd as you like.
You just can't use view links between VO's based on different db schema tables.
Nesting AM's doesn't help there, the DB connection of the top-level AM will be used.
Why don't you create synomyms for the tables in the other schema?
Steven Davelaar,
JHeadstart Team.

Question about multiple audio tracks

Hello,
I see that imovie has only 2 audio tracks available when creating a movie. I need more than two since I will be working with a voiceover track, a soundtrack and at least one background/environment track all at one time. I won't be able to use the sound recorded with the video so that "track" is not an option.
My question is; Am I out of luck here and need to spend the 1K for studio pro to add more multiple audio tracks?
Also, I tried working with garageband but since all of my audio tracks import in at a minimum of 40 beats per minute, the voiceovers are all sped up and sound chipmunky.
Thanks for any help!

Well I didn't mean to irritate you...LOL And yes, I realize that this is the iM 6 forum but the gist of my question was related to multiple audio tracks in iM and thought I would ask about it in the forum pertaining to the latest release.
I had already posted a question in the GB forum regarding the bpm problem and found no answers so I was pretty much about to shelve that idea and forgo the whole garageband thing; this without knowing about the new "swap" features. I just updated to iM 6 yesterday.
As far as the "on-tape" raw audios: I was working on my movie in iM4. I wanted to add more audio bits but I don't have a proper mic for my G5 so I recorded the audio bits on dv8 tape through my camcorder. I imported the video (the image was the inside of my lens cap!), extracted the audio, took those audio files and imported them into GarageBand. That's when I noticed the bpm problem.
I'm sorry about the lack of info I originally gave but like I said, I had pretty much gave up on the idea of using GarageBand. I'm pretty new at this and I'm trying to decide what I need in terms of software to get what I want out of my movie. I'd be willing to pay for FCxp but still looking into whether I need to do just that or whether I can get by by using imovie and now it looks like GarageBand too.
ah, thanks for that
what irritates me, Prince wrote:
The audio tracks were voiceovers that came from my
dv8tape, imported into imovie4.
... ehm, but this is the iM 6(six) section, as said,
iM 6 allows now "swapping" files with GB3... (I'm way
back in the 90ies.... see my specs... )
so, video is in some iM, and he wants to use the
actual "on-tape" raw audios...
I thnik we need a little more detail...

OT: question about multiple root directories

ok, so on this website i just transferred to a new host, i
password
protected a directory, and for many people (possibly
everyone) it is
asking for the login info twice or three times before it lets
you in. i
contacted the host tech support, who gave me an explanation
that i don't
think makes sense. or maybe it does, but i don't think
applies to my
problem. and even if it does, they didn't offer any advice on
how to
solve the problem, just what might be causing it. bad tech
support.
anyway, i had a different idea about what the might be. there
are two
root directories on the server: public_html and www. they
both have the
same files, and therefore my protected directory is protected
in both
places. to me, that seems like it could be why it's asking
for login
info more than once.
so, i want to find out if this is the case by deleting the
one i'm not
uploading to. so basically, my question is, if i have chosen
public_html
as the directory that i upload to, is it safe to delete the
www
directory? or is there a reason that i need two root
directories and,
essentially, two copies of my site on the server?
i realize these are probably questions best suited for my
host, but i'm
unimpressed with their tech support so far (though i like
everything
else about them), and i'm confident that someone here will be
able to
answer this question for me.
thanks!

ok, well that's good to know! thanks.
also, i changed my mind about the tech support response.
here's what he
said:
Typically when you are seeing multiple login prompts like
what you
describe it has to do with content/site linking.
Here is a rather wordy explanation:
When entering a password-protected web site for the first
time, you
will occasionally notice that you are asked for your
password twice.
This may happen immediately after you entered the password
the first
time, or it may happen when you click on the first link
after
authenticating the first time.
This happens for a very simple, but nonetheless confusing,
reason,
again having to do with the way that the browser caches the
login
information.
Login information is stored on the browser based on the
authentication realm, specified by the AuthName directive,
and by
the server name. In this way, the browser can distinguish
between
the Private authentication realm on one site and on another.
So, if
you go to a site using one name for the server, and internal
links
on the server refer to that server by a different name, the
browser
has no way to know that they are in fact the same server.
For example, if you were to visit the URL
http://example.com/private/,
which required authentication, your
browser would remember the supplied username and password,
associated with the hostname example.com. If, by virtue of
an
internal redirect, or fully-qualified HTML links in pages,
you are
then sent to the URL
http://www.example.com/private/,
even though
this is really exactly the same URL, the browser does not
know this
for sure, and is forced to request the authentication
information
again, since example.com and www.example.com
<
http://www.example.com> are
not exactly the same hostname. Your
browser has no particular way to know that these are the
same web site.
at first i thought that didn't make any sense because i've
been using
the same url every time. but after paying closer attention
during the
login process, i see that he's right. i've been typing in the
url with
the www, but once you get logged in, there is no www. so i
tried typing
it in without the www, and i got right in with the first
attempt.
so, i suppose my question now is, can i make it so that
typing in the
url with the www, lets you in on the first login attempt? or
should i
just tell everyone to leave out the www?
thanks for the help!
Alan wrote:
>
>> there are two
>> root directories on the server: public_html and www
>>
>
> Usually, only one of them is a real folder. The other is
a symbolic link, a
> shortcut to the other.
>
> Don't delete either of them. You might delete the real
folder instead of the
> symbolic link. And- in most hosting setups, you wont
have permissions to
> delete the folder anyway. Changing the
ownership/permissions of those
> folders prevents panicked help ticket calls.
>
> You didn't say what the host says is the reason people
are asked for
> passwords several times. What did they say?
>
> and- is the first page that opens in the password
section a framed page?
> Or- does it draw images and other files from deeper
nested directories? Such
> an images folder?
>
>

Another question about multiple copies

I've seen several others posting questions lately about making multiple copies, but my question is just slightly different. I'll be making an iDVD project for our 5th Grade Recognition at school. Obviously, I'll be making it on my Mac at home. However, once it's finished and I have my final DVD, I'm going to need to make over 50 copies.
Last year, when I did the presentation as a Powerpoint show, it was easy enough to use multiple (Windows) computers at school to duplicate. There are 4 computers that I used to just rotate CD's in and out of to make copies.
Will I be able to use a Windows machine to make copies of an iDVD disk? I know that the computers can burn DVD's, so that's not an issue. I can't remember exactly which programs the computer have. I believe that one is Sonic something. The one that I used for CD's was IRecordNow (or something like that).
Is there any "protection" placed on the iDVD disk that will prevent me from placing the iDVD into the drive and choosing "copy" in whatever program that I use?

Is there any "protection" placed on the iDVD disk that will prevent me from placing the iDVD into the drive and choosing "copy" in whatever program that I use?
No. Only DVDs made in a production house have copy protection applied.
(31727)

Question about multiple Script declarations

I'm reading Flash Builder 4 and Flex 4 Bible.
On page 121 it states:
"Any particular <fx:Script> element can contain nested ActionScript or use the source property to link to an external Actionscript file, but it cannot do both at the same time. You can, however, have as many <Script> declarations in a single MXML file as you need>"
My questions are about the last sentence.
1) They specifically used <fx:Script> and <Script>. Are these two different entities?
2) I've never seen examples of using multiple <fx:Script> declarations in a project. How would this work?
3) Are they promoting bad practices by making this claim?
Thank you
Kristin

Although multiple script tags are allowed, I'd guess that they're not commonly used.
Gordon Smith
Adobe Flex SDK Team

A question about Logical Disk Performace collection Rules and how the Data is displayed in a Report view

Hello
I am currently on SCOM 2007 R2 CU6 and Window Server Operating System MP version 6.0.6989.0 (I cannot use the latest version of the MP as we still have some Windows 2000 Servers we need to support, yes I know :( )
Any way the issue is, I have never found the Logical Disk performance counter data very reliable from SCOM.
For example, I have a Windows 2008 R2 Server and when looking at a local Logical Disk (which holds an SQL temp DB on a busy SQL Server) and look at the performance counter
The SCOM collection rule is called "Collection Rule for Average Disk Seconds per Transfer"
The actual Windows Perfmon counter is called "Avg. Disk Bytes/Transfer"
if you look at the description of the above Perfmon counter it is described as
"Avg. Disk Bytes/Transfer is the average number of bytes transferred to or from the disk during write or read operations."
The problem I have is as follows:
The resulting SCOM performance chart over several days (which has a scale ox 1x) states the value never reach 3 (e.g. maximum wa s 2.7 say). I cannot believe the a drive holding the tempDB databases for a busy SQL Server does not transfer more then 2.7 "bytes"
of data at a given to to its tempDB databases!
Indeed when I look at Permon on the Server and looks at this counter over say 20 minutes or so, the figure is often in the 10,000 or 30,000 bytes etc. It does fall back to 0 (zero) momentarily but mostly it is in the 1000s, or 10,000s etc.
Therefore when my boss says show me the "Avg. Disk Bytes/Transfer" and SCOM says it has not exceeded 2.7 over the last business week (i.e. the chart never peak above this value on the chart with scale 1x) he naturally does not believe it!!
Any advice please regarding the above. Is it the fact if the counter ever falls to zero it messes up the SCOM report charts?
Thanks
AAnotherUser
AAnotherUser__

Create your own collection rule, to mirror the sample times, and what not. Look at the data from your rule vs the mp default rule. It probably has to do with the chart scale imho.
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Question about multiple ipods on one computer

I set up my own ipod nano on my computer and I have been using it without problems for some time. Now someone else in my family got the same ipod nano. I do not know how to set up this new ipod. Do i use the same software already on my computer? Do i just register this new ipod? Please help. Thank you

Hello!
Let me explain this in detail for you:
The Do Not Disconnect screen
It is normal for your iPod to say this message to you when you connect it to your computer.
When you need to disconnect it from your computer, you'll first need to eject it.
There are a few ways to eject your iPod; through iTunes, the Safely Remove Hardware program, and "My Computer".
Through iTunes
Ejecting your iPod via iTunes depends on what setting your iPod is on for.
Connect your iPod. Go into Edit> preferences> iPod. See what setting your iPod is on; "automatic" or "manual".
Automatic
If you aren't restoring, or updating your iPod, iTunes should automatically eject your iPod from iTunes. If it doesn't, then right-click the name of your iPod in iTunes, and make sure that the "enable for disk use" is un-checked.
Manual
If you need to eject your iPod from iTunes if the setting is "manual", click the little arrow that's next to the name of your iPod in the left source list in iTunes.
Through the "Safely Remove Hardware" program
Look at the bottom-right corner of your screen, and there's the system tray icons there. If the "Safely Remove Hardware" icon is there, click on it, select your iPod, and click "stop".
Through "My Computer"
Go to "My Computer".
Find your iPod's listing there (it's typically "E:" or "F:").
Right-click it, click on "eject".
For additional information about ejecting your iPod, check this Apple Support articles about it.
Safely disconnecting your iPod
About the "Do Not Disconnect" and "OK to Disconnect" screens on iPod
Any more questions? I'll be glad to try to help you again.
~~Kylene

Question about multiple computers on one iTunes Store account

I have an iPad which I need to sync with several (actually 8) different Macs around the country. This is the nature of the work I'm doing at the moment. I plan to set all 8 Macs to the same iTunes Store account. I don't need to authorise them to play music or video, but I do want to be able to transfer content and apps I purchase so that I can backup the iPad whichever office I happen to visit. If I purchase an app in one office, presumably I can download it again for free on any of the other Macs should I need to. Understand that this is purely so that I can sync and backup in multiple locations without losing my apps or content.
Does anyone know if what I'm proposing will work? Is the "Authorized Computer" limit purely a limit on playing back content in iTunes? Or will I be prevented from syncing my apps and content on more than 5 computers?

What is not yet clear is quite how the new rules square up with the old rules that one account can be authorized on up to five computers and up to five accounts authorized on any one device.
Unless I'm much mistaken I think you can backup an iPad/iPhone on any computer running iTunes without authorizing it to any of the individual accounts that may have been used for purchased content on it first, although transferring purchased content from the device to the computer does require prior account authorization.
Since you can re-download apps at any time and, at least if you are in the US, now re-download previously purchased music, I think you should be fine. Thought I'd still suggest that it might be easier to take a portable version of your library with you than set up eight independent instances of iTunes.
tt2

Question about multiple LTS

Hi,
I am currently working with the rpd and a general doubt pops up... in the physical layer I have dimensions related, like for example Person, related to another dimension City and for example Age (with Foreign Key join):
City -< Person
Age -< Person
So in order to have a true star schema in the BMM, I need to create a single logical table with these three physical tables, right? The question is how.
I can add the physical tables as 3 logical table sources, or have one single logical table source, mapped to these three physical tables.
What is the difference, if any? Can someone explain, please? I always use the first choice (multiple logical table sources, each of them mapped to one physical table), but is it better to have just one single logical table source?
Thanks in advanced :)

I'm not surprised that it works fine, but there is a chance that it can lead to some problems. Let me explain.
You now have three LTS in your Logical dimension table Person.
Person
Age
City
When you create a report with columns from City and the Fact table, the BI Server will need to set up a join path between Fact and City table. There is no other option then via the physical Person table. So the BI Server decides for you to create a join between fact and person and person and city.
When the City is joined to other tables in the physical layer then the BI Server might create another join path between Fact and City, because it thinks it is more efficient. This can lead to inccorect results.
When you add the three physical tables to one LTS, you explicitly tell the BI Server, to create a join path from Fact to City table via the Person table.

Question about multiple listeners and vip addresses in rac.

We have a 2 node rac cluster running 10.2.0.3 on rhel4 on the itanium platform. We have a need where we want to connect the 2 hosts up to another network temporarily by configuring an additional network interface on each server so that we can test some connections from a different network.
My question is can you configure multiple listeners on the same server in which the newly added listener can be configured to service requets on the new network interface?
Because it's rac would you need to configure an additional vip address? I am not sure that you can have multiple vip's on a server?
Has anyone configured rac in such a way, any help is appreciated.

can you configure multiple listeners on the same server in which the newly added listener can be configured to service requets on the new network interface?Yes, you can but you should not be doing this. Listener is a node specific resource and one listener can server multiple services. You actually can create multiple services within the database for different set of users and all can be registered to the same listener.
Because it's rac would you need to configure an additional vip address? What do you mean by additional IP?
You have installed 10g RAC where you have already configured virtual IPs. Why do you want to have additional one? node1 - static ip1, vip1, pvtip1
node2 - static ip2 vip2, pvtip2
total 6
I am not sure that you can have multiple vip's on a server?Nothing to do with the server, they are based on public IP. Yes you can create multiples vip's based on same public IP. This is possible, But you do not need to do this in RAC environment.

Question about multiple recovery partitions

Hello,
My question is: what is the default partition for toshiba z930 ultrabooks.
According to Windows 8 disk management, there are 6 partitions on my drive. From what I understand, the 6Gb is for hibernation (my computer's RAM is 6Gb), and the 101.38Gb is the main partition, and the 10.60Gb is for Toshiba recovery. I heard that the 450Mb partition is meant for Windows repair tools. But why are there two of such partitions?
Recently I did a reset using the built-in windows 8 function. Not sure if this caused the "duplicate" 450Mb partition.
What is the default partitioning scheme for toshiba z930 ultrabooks? My purpose of asking is partly out of curiosity but mainly because I am afraid of creating more of these 450Mb partitions if I should do a reset in future. Logically, a reset should not cause the duplicate partition but why are there two seemingly identical partitions? (I did not check the partition scheme when I first bought the computer, so I am not sure if I caused the duplicate. )
Thanks very much in advance for taking the time to help me. I've attached a screenshot of the partitions.
http://oi57.tinypic.com/2rw6zia.jpg

I don't have a Toshiba machine here, but I know something about Windows 8 and about UEFI/GPT partitioning. I can tell you what four of the six partitions are for.
Starting from the left side, the first partition contains the recovery environment (starts with the Choose-an-option menu); the second (System) partition contains the boot files; the C partition has Windows of course; and the 10.6 GB one is the recovery partition, which contains the image of the whole drive (including itself).
I don't know what Toshiba uses the other two partitions (450 MB and 6 GB) for. Perhaps somebody here will explain those to us.
Peculiar that Toshiba does not have the 128 MB Microsoft Reserved Partition. I thought everybody must have that one.
Configure UEFI/GPT-Based Hard Drive Partitions
PS A Reset preserves the partitioning and the hibernation image is the file C:\hiberfil.sys.
-Jerry

Question about Multiple Choice Quiz

I have multiple choice quiz that I'd like make more complex. The quiz is based on a movie clip with a series of questions on different frames and the same set of answer buttons on each frame (no keyframes on the answer button layer). The user clicks a button to go from one question to the next. There’s a scoring mechanism that displays the number of correct answers (score), the total number of answers clicked (right or wrong), and the percentage of right answers.
For each question, only the first answer counts toward the score. If you click correctly the first time, a point is added to the score and to the total. If you click incorrectly the first time, a point is added to the total only. After you give the first answer, right or wrong, you can still click on all the answers to see which answer was correct; the correct answer button changes in appearance and the correct sound cue plays but no point is added to the score or total. If you click on a wrong answer after you’ve given the first answer, the incorrect sound cue plays but no point is added to the total. In other words, you can’t help or hurt your score after clicking on the first answer, but you can determine which answer was correct.
This all works fine.
But now I want to make a similar exercise that has TWO questions on each frame. The answers both come from the same set of answer buttons. The question is how to preserve the “only the first click counts” mechanism for each of the two answers, since clicking on the answer to the first question will mark the frame as “answer has been given” and prevent any further scoring. There needs to be a point given for each correct answer on the frame.
Here’s the code from an answer button in the existing quiz. How would I modify this to allow for two answers per frame?
on (press) {
                /* This code executes whether this is the first click on the answer button or a subsequent click. If the answer is correct (if this is frame 1 or 3), the correct sound cue plays and the answer button changes its appearance, and if the answer is incorrect (if this is any other frame), the incorrect sound cue plays */
                if (_currentframe == 1){
                        _parent.snd_obj.playsound("correct", "cue1");
                        answer1_mc.gotoAndStop(2);
                }else if (_currentframe == 3){
                        _parent.snd_obj.playsound("correct", "cue1");
                        answer1_mc.gotoAndStop(2);
                }else{
                        _parent.snd_obj.playsound("incorrect", "cue2");
                /* This code executes only if this is the first click on the answer button. It checks to see if an answer has been clicked in this frame, and if not, it marks the answer as given (so this code will be executed only once) and then adds one point to the total, one point to the score for correct answers, and re-calculates the percentage */
                if (!_parent.answerGiven[_currentframe]) {
                        _parent.answerGiven[_currentframe] = true;
                        _parent.total = _parent.total + 1;
                        _parent.percent = Math.round((_parent.score / _parent.total) * 100);
                       if (_currentframe == 1){
                               answer1_mc.gotoAndStop(2);
                               _parent.score = _parent.score + 1;
                               _parent.percent = Math.round((_parent.score / _parent.total) * 100);
                      }else if (_currentframe == 3){
                           answer1_mc.gotoAndStop(2);
                           _parent.score = _parent.score + 1;
                           _parent.percent = Math.round((_parent.score / _parent.total) * 100);
                       }else{
                           _parent.snd_obj.playsound("incorrect", "cue2");

This is indeed a very random issue. I have seen this in earlier versions of Captivate as well. I always create my template files from the blank theme, so I don't think it is specific to the theme.
As for solutions, sometimes changing the quality of slide to high worked, other times just reopening Captivate worked. Here are some of the solutions I have found on these forums:
1. Create one more answer than I need (ie for a 4 answer question, create 5 answers) and then delete answer B.
2. Uninstalled/reinstalled my Captivate 6 software
Sreekanth

Question about multiple containers in PFAC rule

Similar Messages

Maybe you are looking for