Question about N95 8G can I get your answers??plzz...
hi every one I want to buy Nokia N95 8G but I heard that when I put many movies and songs in it..it become slow amd hang alot..plz can any one tell me if this problem is true or not??thanks alot.
The only reason it may get slow is if you start running out of memory.
As long as you manage your memory and keep some free space you should be fine.
640K Should be enough for everybody
El_Loco Nokia Video Blog
Similar Messages
-
Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...
Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user posted the following:
I got some help from an apple assistant on the phone.
It is kind of round about way to get in
Here is what he said to do and it is working for me...
1) on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
2) Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
3) sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
4) At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends! -
How can you get your submit buttons to be a single click instead of the default double click? (The
How can you get your submit buttons on the quiz template to be a single click instead of the default double click? (The option to choose double click or not is not showing in properties for this).
Hmmm... Submit button doesn't need a double click at all. Maybe you are talking about the two-step process? When you click on Submit, the feedback appears with the message to click anywhere or press Y. Is that what you are talking about? If you are talking about a real double-click, something must be wrong in your file. And which version are you using?
http://blog.lilybiri.com/question-question-slides-in-captivate
Lilybiri -
HT204088 How can I get the answers of Security questions?
Hello,
How can I get the answers of the security questions?If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Questions' or 'iTunes Store account security' (it appears to vary by country) and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox).
Or you could see if the second half of Kappy's reply in this thread helps : https://discussions.apple.com/message/20357006#20357006 -
How can you get your photos in the order they are in your computer
How can you get your photos synced to your phone in the same order as the file on your computer?
The iPhone Photos app orders photos by date.
-
How can you get your i pod touch screen fixed
How can you get your screen on an i pod fixed
Apple will exchange your iPod for a refurbished one for $199 for the 64 GB one and $99 for the others. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
How can you get your iTunes music back when your iTunes Match expires & you no longer have access to the computer it ws stored on?
Try here:
iTunes: Error 13019 during sync -
How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Can you get your photos back after the iphone does a restore
Can you get your photos back after the iphone does a restore?
Actually, wrong.
The tech support people can help with Playbook purchased apps. If you've called and they said they cannot, you were lied to.
Even in the link you posted, in #10, it states clearly "App Refund related matters are handled by BlackBerry Customer Care." That, my friend is accessed by the support number. Again, if you were told otherwise, you should inform them of such or ask for a manage/supervisor.
And, you don't have a "Partner ID" because you are not a "Partner". The section you're referring to applies to mobile providers, which are the Partners.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Can you get your previously purchased ringtones from itunes back when you switch to a new device?
Try here:
iTunes: Error 13019 during sync -
HT3529 How can you get your picture to show up in iMessage?
How can you get your picture to show up in iMessage?
What do you mean by picture?
Picture in a message or like a contact picture? -
HT5624 how can you get your password sent to your email address I do not want to change my password.
How can you get your password sent to your email address I do not want to change my password.
If you cannot remember the passcode for the Screen Lock, you will need to Restore the device...
1) Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
How sparse can you get your xorg.conf?
how small can you get your xorg.conf with everything working for your system? (without being blank)
Section "InputDevice"
Identifier "k0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "m0"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "Buttons" "7"
Option "ZAxisMapping" "4 5"
Option "ButtonMapping" "1 2 3 6 7"
Option "Emulate3Buttons" "0"
Option "Resolution" "2000"
Option "SampleRate" "1000"
EndSection
Section "Device"
Identifier "v0"
Driver "fglrx"
Option "VideoOverlay" "1"
Option "OpenGLOverlay" "0"
EndSection
Section "Monitor"
Identifier "m0"
DisplaySize 336 269
EndSection
Section "Screen"
Identifier "s0"
Device "v0"
Monitor "m0"
DefaultDepth 24
EndSection
Things i had to set manually;
1) Keyboard layout, because it defaults to US
2) Two mouse keys don't work had to manually set, Emulate3Buttons defaults on (wanted it off)
3) "VideoOverlay" is off by default (or is not auto detected)
3) needed to set DPI to 96
4) needed to set color to 24 (defaulted to 8?)
apart from that, the auto detection is vastly improving IMO.
The main premise behind this, is to debate the auto detection capabilities of hardware by xorg.
Last edited by gav616 (2008-03-10 00:59:37)Man, all I run is dwm, but i'm still so afraid to edit anything here. Anyone have any suggestions as to how I can prune this baby?
By the way this is a laptop with an ATI card.
lspci shows: 01:05.0 VGA compatible controller: ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP]
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "xtrap"
Load "record"
Load "GLcore"
Load "dbe"
Load "dri"
Load "freetype"
Load "type1"
Load "drm"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "CPT"
ModelName "13a6"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "RS485 [Radeon Xpress 1100 IGP]"
Option "XAANoOffscreenPixmaps" "true" #needed for aiglx
BusID "PCI:1:5:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Last edited by F (2008-03-11 06:35:07) -
How can you get your facebook pictures to sync with your contacts?
take a look at the link
http://www.iphonestuffs4u.com/how-to-sync-facebook-contacts-to-iphone/ -
How can you get your iPhone videos to compress to one video instead of 5 different frames?
How can you get your iPhone videos to compree to one video instead of different frames
It sounds like you to 5 separate videos. If you start recording, then stop it, then start it again, you will have 2 videos. Not 1. As for splicing them together, you will need a video editing package for your PC. I don't know if Windows Movie Maker (or whatever they're calling it now) can handle this or not. On a Mac, I'd say just use iMovie.
Maybe you are looking for
-
Getting error while trying to upload the data in excel from SSIS package through sql agent job
We are getting below errors. Error: The Microsoft Jet database engine cannot open the file '\\serversdev\Documents\QC Files\Prod.xls'. It is already opened exclusively by another user, or you need permission to view its data. Please suggest ASAP Rega
-
I have been requesting help for this for the past HOUR. Firefox is placing ads on my screen at start-up (and they remain there) to get firefox on Android (I don't have a cell phone that uses it), and to go to the firefox site with information on how
-
Hello, I am having the same issues over and over again. I design an animation in Adobe Edge Animate and import it into InDesign. If I upload it to my IPad and open it with the Adobe Content Viewer I have the following problem: I go onto the designed
-
Hi Friends , I have a reference table Ref_table_code, Ref_table_code ID Table_name Related_table Code Status, Description Definition ------ e.t.c Table name is like a domain , and you can have multiple codes for a table_name. The requirement is to cr
-
Does there exist a callback method for DBMS_ALERT.WaitOne in OO4O? And How to use the callback object for AQ in OO4O?