Question about Network In/Out in the Monitor of the Cloud Service

Hi there
My question is that what kind of data is the monitor monitoring? The monitor is in the cloud service.
And what are network in/out in the monitor stand for? The network in/out are in the monitor.
The monitor had monitored a huge amount of data in my cloud, but I have no ides what are they.
Thanks a lot!

hi Tianchi,
Thanks for your posting!
>>what kind of data is the monitor monitoring? The monitor is in the cloud service
From the concepts side, By default, minimal monitoring is provided for a new cloud service using performance counters gathered from the host operating system for the roles instances (virtual machines). The minimal metrics are limited to
CPU Percentage, Data In, Data Out, Disk Read Throughput, and Disk Write Throughput.
If you want to monitor other metrics, you could use the azure Diagnostic to custom
performance counter in your cloud service or set
Verbose setting on the azure portal. For this issue, I suggest you could refer to the concepts part of this page (http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
>>And what are network in/out in the monitor stand for? The network in/out are in the monitor.
Base on my understanding, Network in/out include the
performance counter "Bytes receive" and "Bytes send". Maybe it seems that your data size of network in/out is huge amount. But only your outbound data
can be charged. Of course, if you have some doubt about data or data billing, you could contact Azure Billing support for more details.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Question about using iMac 2011 as a monitor

hi ,, i have imac 2011 21'5
can i use as a monitor to play xbox 360 on it using mini displayport to hdmi cable ??
if no then is there way else i can play xbox on my imac screen

Frank:
Thanks so much for responding! One question about your post. When you say that the Mac Mini cannot boot in OS 9, does that mean that if I wanted it to hold Filemaker Pro 4 files (which runs on OS 9), that it cannot do this? We would not be running Filemaker on the Mini, just storing the files. We would run Filemaker off of our desktop computers. Sorry, I don't know a ton about computers, so sometimes I need clarification about the terms that people use.-Rob

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I c

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it

Please authorize ADE 3 with same credentials that you used with older version of ADE

If I put my 7300 in slot4 at 8x, and a 8800GT at slot1, 16x, could I boot 10.4.11 on my mac pro 1,1 if I unplug the monitor from the 8800GT?

If I put my 7300 in slot4 at 8x, and a 8800GT at slot1, 16x, could I boot 10.4.11 on my mac pro 1,1 if I unplug the monitor from the 8800GT?
I have different os's installed on my different hard drives. I'm using 10.6.8 now, but I go back to 10.5.8 and 10.4.11 on accasion. Can I run 10.4.11 with the 7300 in the 8x lane? As long as I unplug the 8800GT but leave it installed in the 16x slot1? And attach a monitor to the 7300?
What about using the 7300 to run extra monitors or a monitor while running 10.5.8 and 10.6.8? Is that a problem? I have 10GB Ram and the 1,1 original machine.

I know the 8800 requires 10.5.2, but if it is installed (at 16x) but no monitor is connected, will it allow the 7300 to control one or two monitors in 10.4.11? When the 7300 is in the 8x lane? And will it boot?
I lost part of your train of thought. Are you telling me to get just an ATI 5770 to continue using this machine into the future?
I thought the original mac pro 1,1 needed cards of the same manufacturer. If I use the 5770, that eliminates the ability to boot 10.4.11, correct?
What if I keep the 7300 handy in a box and put it in when I have to use 10.4.11? ( select the start up disc, shut down, change the card, restart) Does the 5770 require a power cable to another board that I might damage with repeated changes?

I have an iMac (the desktop) I've stupidly left the cable you plug the monitor into the wall with there. What are they called and where can I get a new one?

I have an iMac (the desktop) I've stupidly left the cable you plug the monitor into the wall with there. What are they called and where can I get a new one?

Presumably the mains cable, which you can get from an Apple Store.

To switch off the monitor and the keyboard lights?

Hello,
Is it possible to switch off the monitor and the keyboard lights of a MacBook Air while I'm using it at home with an external monitor and keyboard?
Many thanks in advance!
manoka

You can turn off the keyboard lights by unchecking System Preferences > Keyboard > keyboard tab > Automatically illuminate keyboard in low light. Then use F5 to lower the keyboard to off.
The Monitor can't be switched off but can be reduced to almost off using the F1 key.

Question about playlist content moving to different positions on the LCD Monitor

Hello Experts,
I'm trying to find out if there is a way to have the content move to different positions on the LCD Monitor. The presentation we have always has the contenrt in the same position on the screen. Other than creating multiple playlist and scheduliung them to play at different times I'm not sure how this can be done. But if anyone knows how this can be accomplshed please let me know.
Thank you ,
Ben
ISC Inc.

Ah! Found it.

Questions about iphone with/out the SIM card

Someone is selling me his iPhone and I might or might not use it as a phone.
If I don't put my At&t SIM card in can I still use Safari (over Wifi) and the ipod function?
If I do put the SIM card in can I use all the functions of the iphone without a data plan?

If you purchase a used iPhone and take the iPhone with you to an at&t corporate store, more than likely at&t won't charge you for a new SIM card to activate the iPhone with at&t.
When activating an iPhone with at&t, as a new subscriber or as an existing subscriber, selecting the unlimited data plan for the iPhone, which includes 200 SMS, is required at that time. If you are an existing at&t subscriber, this replaces any existing data plan and SMS plan you currently have and are using with an existing phone with at&t.
Some have reported that were able to cancel the unlimited data plan after the activation process, but this will eliminate visual voicemail - which are downloaded to the iPhone via at&t's data network only, and if downloaded anyway without the data plan, you will be charged by the KB for each messages downloaded to the iPhone. The same when accessing the internet other than when connected via wi-fi with the iPhone. If you access the internet via at&t's data or EDGE network without the unlimited data plan, you will be charged by the KB for all data downloaded and uploaded - when checking email, web browsing with Safari, Maps access, youtube, etc., etc.
You say you won't use the unlimited data plan, but you will likely want or need to use it more often than you realize. If you don't want the unlimited data plan, you may want to consider purchasing an iPod Touch instead.

Questions about networking a desktop app

So the background first: I'm working on a hobby program, and wanted to try my hand at networking it. It's a desktop app (a simple game) that two or more users can play at the same time. There's no centralized server to connect to, it will be an ad hoc connection. One user hosts a game (starts a server) and then others join the game (start their clients). I've done a lot of research, but still have some unanswered questions. I plan on using ssl encrypted socket connections. I used this tutorial to learn about trust managers and such.
My questions are:
1) What's the best way to give the users the info they need to connect to each other? I haven't looked into it yet, but I'm assuming it's not to hard to display the server's ip address, which they can give to the clients to connect to the server. PC games used to do this years ago before companies began hosting matchmaking services. Is there more required than that?
2) What's the best way to pick a port number that all user's have access to? I know I need to pick a port that isn't registered by another app, and that the port number will need to be given to the clients along with the server's ip. If the server is able to open that port, is there a situation where clients wouldn't be able to access that port?
3) Since this is basically a toy, I don't want to to the trouble of something like Verisign for security. Will a self-signed certificate authority be adequate? My concerns are not opening user's computers to attack, and protecting the data in transit. I know ssl will protect the data, but I'm not knowledgable with security to be sure if a shared trust manager will be enough to only let the app access the connection. What are the risks of someone bypassing the security and gaining access to our systems?
I've never written an application that had to deal with network security, so please pardon my paranoia, and thanks very much for any help.

If you are getting the week or intermittent wireless connection then,try the following settings on the router...Under the Wireless tab,Change the Channel Width to 20MHz and Channel to 11..Provide unique SSID.Under the Advanced Wireless Settings..Change the Beacon Interval to 50,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...Power Cycle the network and check the connection.
WPA2 is very secured Secured type,so it is advisable to use it.However,it is not necessary to use WPA2.
If you are using "N"Router then,to get the full advantage of N Speed,you should "N" Adapter.
If you want to set the static DNS on the computer or any other wireless device then,you can set any DNS numbers.
To repeat the wireless signal of the N Router,I would suggest you to go for an Access Point like WAP610N.

Question about networking iMac and streaming video to TV

I have the 24" iMac 2.66GHz with 4 G ram. Currently using Motorola SBG900 (Docsis 2) cable modem & router to stream Comcast through house (another PC, iPhones, LG Blu Ray player/digital video streamer).
Recently acquired a Netgear Rangemax 3700 which is supposed to be the fastest current wireless router. Here are my questions:
1) Can I just use the Motorola SBG900 as modem ONLY and run the ethernet out of it to the Netgear router (thus bypassing the router built into the SBG900). Will this accelerate the streaming of video to other receivers?
2) Would I be better off with a Motorola 6120 Docsis 3 Cable modem feeding the Netgear router (even though my Comcast cable feed is Docsis 2, not 3)?
3) Since my Comcast account is rated 10 Mbps max (though it sometimes goes up to 15 or so late at night) and I believe the existing Motorola SBG90 is rated at 54 Mbps, is the limiting factor the speed of my Comcast connection and all else doesn't matter? That is, is it impossible to speed up my streaming or download speed without a faster connection to the Internet?
4) What kinds of connections are there that are faster than Comcast cable connections?
Basically, I don't want to waste money or time if I'm already at the maximum throughput available given my connection. If I can get marginal speed increases by adding new modem and router, that's fine. I'll do that.
Thanks for your help.
PS: I owned and returned the Airport Extreme Base Station. It did not increase the speed of my connection or streaming, but then it tested very poorly at www.smallnetbuilder.com -- about half the speed of the Netgear Rangemax.

Can't help with Q 1 + 2, but here are some things to consider re:
+3) Since my Comcast account is rated 10 Mbps max (though it sometimes goes up to 15 or so late at night) and I believe the existing Motorola SBG90 is rated at 54 Mbps, is the limiting factor the speed of my Comcast connection and all else doesn't matter? That is, is it impossible to speed up my streaming or download speed without a faster connection to the Internet?+
My Comcast account is rated 15 Mbps and I never get that. I've done everything I can here including Cat 6 cables (instead of Cat 5), but the major problem/hangup in my case is: Comcast is using 20-year old buried cables from their hub (approx. 10 mi across town) to the neighborhoods here - those cables are "leftovers" from the company Comcast purchased the rights from. So, we not only have old cables, but the little boxes all over the neighborhood feed at least 6 - 10 homes each, so you are sharing the available bandwidth with the neighbors. And, whenever everyone seems to be online at the same time, my downloads slow down to a c r a w l (as slow or slower than dialup occasionally!).
So, unless you have a better/newer cable setup where you are, you need to keep that in mind; in that case, no matter what you do, you are at the mercy of Comcast's equipment and your neighbors' usage.
4) The only one I know of is FioS (fiber optic).

Basic questions about Network Licence

Hi,
Before buying, I have some basics questions about the network licence of Acrobat
As an example, if I buy 5 network licence for 20 users.
If the 5 licence are used or if one user is outside and can't access the licence serveur, is there still some basic features available? I mean, is there a "acrobat reader" part that still allow users to read pdf?
In the same kind of problem, if 10 users are using Acrobat just for reading pdf file and that a user now want to use acrobat to create a pdf, is there still available licence or the 5 firsts that are just reading have take the 5 licences available?
Thank you for your answers

This is a user to user forum, with the space provided by Adobe
This is not official Adobe support... I think you need to contact Adobe

Question about Network (JNet)

Dear experts:
I use Network in my WebDynpro program, in the graphic, first node (A) act as a container, it contain two other nodes: B and C. I found that B and C displaied vertically in A, but I want them are horizontally displayed in A. Anyone know how to do that?
Thanks.

If you're talking about round robin DNS, then no.
DNS is completely blind as to the state of the servers in its table.
Sure, you can say that your server has two IP addresses, and BIND will happily hand out both addresses to each client, effectively splitting the load between them, but if one of the servers goes down BIND has no way of knowing that and will continue to offer the second IP address as valid, even if users can't get there.
There are load balancing technologies available that will automatically failover connections from a failed server, but they tend to cost $$$ (or, at the very least require running a separate 'traffic cop' server in front of your real servers and if that goes down then all bets are off).
That's not to say you're out of options altogether. It's possible to configure Mac OS X's IP Failover - a system that automatically kicks in when a partner server fails. You could use this to take over the second machine's IP address and start up services as soon as the partner fails - users would continue to connect to the hostname they're familiar with, but behind the scenes that IP address has moved to a different box. This is covered in the Mac OS X Server docs - look for IP Failover.

Question about configuration (ATI 5770) w/ 3 monitors

Ok I already know how to get three monitors running on the ATI 5770. I have one native mini DisplayPort, one mini DisplyPort to VGA and one native DVI or DVI to HDMI. What I need to know (before I buy another native mini DisplayPort monitor) is if the 5770 can run two native mini displayPort monitors and a native DVI? Has anyone done this?

i am currently running 3 displays on my macpro 1,1 with a 5770 card. here is my setup
mini display port to dvi (dual link active from monoprice) to an Acer 24" monitor
mini display port to dvi (sme as about) to and dvi to hdmi adapter to 65" 1080i television
dvi port to Acer 24" monitor.
i have to set it up this way because if i set both monitors to mini display port adapters and the tv to the dvi to hdmi adapter one of the monitors will not come on. setting it this way all three monitors are working. the only problem that i have is that my tv monitor flickers like the computer is refinding it all the time. i haven't really had a chance to look into it too much, but i can tell you that without the active link adapters only two of the three connections will work at one time.
hope this helps

Question about using KeyFrames without calling a Keyvalue in the constructo

I'm curious why in examples like this
          Timeline countdown = new Timeline(
               new KeyFrame(javafx.util.Duration.ZERO,
                         (event) -> secondsRemaining.set((int) Duration.between(Instant.now(), finishTime).getSeconds())
               new KeyFrame(javafx.util.Duration.seconds(1))
          );the first is KeyFrame(duration, event) then KeyFrame(duration)
according to the 2.2, and this being pasted from the fx 8 docs is the constructors for KeyFrame
KeyFrame(Duration time, EventHandler<ActionEvent> onFinished, KeyValue... values)
Constructor of KeyFrame
KeyFrame(Duration time, KeyValue... values)
Constructor of KeyFrame
KeyFrame(Duration time, java.lang.String name, EventHandler<ActionEvent> onFinished, java.util.Collection<KeyValue> values)
Constructor of KeyFrame
KeyFrame(Duration time, java.lang.String name, EventHandler<ActionEvent> onFinished, KeyValue... values)
Constructor of KeyFrame
KeyFrame(Duration time, java.lang.String name, KeyValue... values)
Constructor of KeyFrameSo no keyvalues....?
Example 1-5 Timeline Animation
final Rectangle rectBasicTimeline = new Rectangle(100, 50, 100, 50);
rectBasicTimeline.setFill(Color.RED);
final Timeline timeline = new Timeline();
timeline.setCycleCount(Timeline.INDEFINITE);
timeline.setAutoReverse(true);
final KeyValue kv = new KeyValue(rectBasicTimeline.xProperty(), 300);
final KeyFrame kf = new KeyFrame(Duration.millis(500), kv);
timeline.getKeyFrames().add(kf);
timeline.play();I've been a little confused with hod KeyValues and KeyFrames play a role, but it seems like the value specifies on what we are doing, and what we are changing it to (rectBasicTimeline.xProperty(), 300); and the "Frame" is the duration and which "KeyValue?" So the KeyValue is the important part, or an event.
It seems like the event takes place of the "KeyValue" so we don't need one? I see it says (KeyValue... values) and I never really thought about it, but that means as many values as needed?
It doesn't, however, show that Events take the place of the KeyValues soo.... thoughts anyone?
I've seen this posted by 2 members on here(who will most likely answer my question anyways :p) so I was curious how it all works, and if Event does replace a KeyValue, then I want to know when am I supposed to know in which classes this works on...?

The syntax "..." in the type of the last parameter of a method (or constructor) indicates 0 or more parameters of that type. It's called "varargs", or more formally a "variable arity parameter". See [url http://docs.oracle.com/javase/tutorial/java/javaOO/arguments.html]Arbitrary numbers of arguments in the Java tutorial, or the [url http://docs.oracle.com/javase/1.5.0/docs/guide/language/varargs.html]description of varargs from release 1.5.0 of the Java language (when varargs were introduced).
A timeline animation is composed of a collection of KeyFrames. Each KeyFrame consists of a Duration (the time on the timeline for that "frame"), zero or more KeyValues, and optionally an EventHandler.
The KeyValues consist of a writable property and a "target value" for that property.
When the timeline animation runs, it "smoothly" changes the values of all the properties that appear in KeyValues. The aim is that for each instant defined by a KeyFrame, the value of any property specified by a KeyValue in that KeyFrame will be equal to the corresponding target value. Values at times in between KeyFrames are interpolated between the times specified by the KeyFrames.
Additionally, when the time on the timeline passes the time specified in that key frame, and event will be fired to the event handler, if there is one.
So your constructor call with a Duration and EventHandler matches the constructor with signature
KeyFrame(Duration, EventHandler, KeyValues...)
with zero KeyValues. This key frame doesn't specify any values to be "targeted" at that moment, but will call the EventHandler's handle(...) method when the corresponding moment on the timeline is passed.
The code
final KeyValue kv = new KeyValue(rectBasicTimeline.xProperty(), 300);
final KeyFrame kf = new KeyFrame(Duration.millis(500), kv);creates a key frame at 500 milliseconds with a target value of 300 for rectBasicTimeline's x property. So the timeline will smoothly change rectBasicTimeline.xProperty from it's initial value at time 0 to 300 over a time period of 500 milliseconds (assuming no other KeyFrames in there).

Question about networking

So I've gotten placed into the role of UCS manager having only a basic understanding of upkeep (currently taking training). I've noticed some things that I'm curious about but don't know where I should look for more information.
For one. We were orinigally using port channels to do networking when we had a 1g connection to the core from the FI, now that we're 10g my network team told me that we wouldn't do port channel anymore and what I've got currently setup is 3 connections marked network and 1 connection marked unified uplink 2 Network in FI B and 1 Unified Uplink and 1 network in FI A.
This seems very incorrect to me but I also can't seem to set the unified uplink port back to a network port (I don't see that as a configure choice).
If anyone has some good info on what I really need to be looking at that'll be great but if you've run into a similar issue that would be awesome.
Thanks

Sean,
Doing a deeper research in our data base I found that this has no problems and actually is saying that it works as uplink port for FCoE and Ethernet at the same time and it should show up under the LAN and SAN tab as uplink ports.
We set the role of the port to either "Network", "FCoEUplink" or "UnifiedUplink" based on whehter the port is used as an ethernet uplink, fcoe uplink or both.
If you go to the LAN/SAN tab and check the interface you should be able to see the interface as uplink for both as these are Unified Ports that can be FC or Eth ports.
Can you try to unconfigure the port from the "Equipment" tab? the LAN/SAN tabs will only let you delete/disable the interface, and then just configure it as LAN OR SAN uplink?
Let me know what happens.
Rate ALL helpful answers.
-Kenny

Question about Network In/Out in the Monitor of the Cloud Service

Similar Messages

Maybe you are looking for