Question about Nexus 5596 log.

Dear Mister
When I connect toward Nexus 5596, using ipv4 telnet, send the next message:
NITE3# 2013 May 9 18:32:53 NITE3 %LOCAL7-4-SYSTEM_MSG: service telnet, IPV6_ADDRFORM - dcos-xinetd[3193]
What is the reason for this?
Could be a bug?
Best Regards

Hi,
If you want to view the changes made to any an order than open that order and click on EXTRAS--> CHANGE DOCUMENTS in the main menu.
Also if u want to see the changes made it the status u can refer the table CRM_JCDS.
Regards,
PePe

Similar Messages

Question about Nexus 7010.

Hello everybody,
Just a quick question, how do you restore a running-config (or a Nexus .bin file) to a Nexus 7010. Is it thesame process as the IOS base scenario. Please explain and help. Thank you in advance.
--chie

Copy tftp: running-config should work. See below there are other options as well.
NX7K02-agg# copy ?
bootflash:      Select source filesystem
core:           Select source filesystem
debug:          Select source filesystem
ftp:            Select source filesystem
log:            Select source filesystem
logflash:       Select source filesystem
nvram:          Select source filesystem
running-config Copy running configuration to destination
scp:            Select source filesystem
sftp:           Select source filesystem
slot0:          Select source filesystem
startup-config Copy startup configuration to destination
system:         Select source filesystem
tftp:           Select source filesystem
usb1:           Select source filesystem
usb2:           Select source filesystem
volatile:       Select source filesystem
NX7K02-agg# copy tftp: ?
bootflash:      Select destination filesystem
debug:          Select destination filesystem
log:            Select destination filesystem
logflash:       Select destination filesystem
nvram:          Select destination filesystem
running-config Copy from source to running configuration
slot0:          Select destination filesystem
startup-config Copy from source to startup configuration
system:         Select destination filesystem
usb1:           Select destination filesystem
usb2:           Select destination filesystem
volatile:       Select destination filesystem
NX7K02-agg# copy tftp: running-config

Question about ASM Online log files

Hi All,
Wondering if this setup is desirable?
SQL> show parameter db_create
NAME TYPE VALUE
db_create_file_dest string +SYS1
db_create_online_log_dest_1 string +SYS1
db_create_online_log_dest_2 string +SYS2
db_create_online_log_dest_3 string +SYS3
db_create_online_log_dest_4 string +SYS4
db_create_online_log_dest_5 string
SQL>
Looks like logs are being sent to 4 DG's....

HI,
DB_CREATE_ONLINE_LOG_DEST_n (where n = 1, 2, 3, ... 5) specifies the default location for Oracle-managed control files and online redo logs. If more than one DB_CREATE_ONLINE_LOG_DEST_n parameter is specified, then the control file or online redo log is multiplexed across the locations of the other DB_CREATE_ONLINE_LOG_DEST_n parameters. One member of each online redo log is created in each location, and one control file is created in each location.
Specifying at least two parameters provides greater fault tolerance for the control files and online redo logs if one of the locations should fail.
If a file system directory is specified as the default location, then the directory must already exist; Oracle does not create it. The directory must have appropriate permissions that allow Oracle to create files in it. Oracle generates unique names for the files, and a file thus created is an Oracle Managed File.
Cheers

Question about nexus 7 tablet

When I open digital editions it does not list my device. Nexus 7 tablet

Thank you for your report, we will investigate this issue internally.
Could you try using earphones with microphone and replugging it when you notice that the microphone stops working? Does this work?

Question about patch/patch log

Hi,
I just applied the patch R12.TXK.A.Delta.6 patch 7237313.
The adpatch session ran and completed.
When reviewing the log file, i can see the following:
"Cause: Error while trying to read metadata from file /apps/ebs/demo/demoora/10.1.3/j2ee/home/lib/<lib>.jar: No metadata entry META-INF/JRIMETA.DAT found."
I just want to validate if this is really an error or just an informative message?
Thank you,
Felix

Felix,
This is an acceptable warning message, so you can ignore it.
Note: 401424.1 - Oracle Applications DBA Minipack R12.AD.A
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=401424.1
Note: 312594.1 - Getting warning messages when starting adadmin - generate JAR Files
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=312594.1
Regards,
Hussein

Question about Nexus 3548 vPC setup

Hi.
We have just installed our two first Nexus 3548 switches in our Catalyst environment. We want to set up a vPC domain between the Nexuses, to use for connections to storage and other equipment.
I have read the guide at http://www.cisco.com/c/en/us/products/collateral/switches/nexus-3000-series-switches/white_paper_c11-685753.html and tried setting it up. I created a vPC domain on both switches like this:
nexus1:
vpc domain 1
role priority 2000
system-priority 4000
peer-keepalive destination 192.168.105.40 source 192.168.105.39 vrf default
nexus2:
vpc domain 1
system-priority 4000
peer-keepalive destination 192.168.105.39 source 192.168.105.40 vrf default
The switches are connected with a port-channel consisting of 2x 10GE. The IP addresses above are the ones we use for managing the switches. When I configure the port-channel as "vpc peer-link", the vpc status looks OK:
vPC domain id                     : 1
Peer status                       : peer adjacency formed ok
vPC keep-alive status             : peer is alive
Configuration consistency status : success
Per-vlan consistency status       : success
Type-2 consistency status         : success
vPC role                          : primary
Number of vPCs configured         : 0
Peer Gateway                      : Disabled
Dual-active excluded VLANs        : -
Graceful Consistency Check        : Enabled
Auto-recovery status              : Disabled
vPC Peer-link status
id   Port   Status Active vlans
1    Po2    up     1,6,100,102,106
The problem I have is that I lose connection to nexus2 when I bring up the vPC. I can no longer access it on its IP (192.168.105.40). I cannot ping it from nexus1 either. The Nexus switches are connected to our core switches, which are Catalyst 6509. nexus1 is connected to coreswitch1 using a portchannel of 2xGE and nexus2 is connected to coreswitch2 the same way. A spanning-tree cost has been set on the uplink from nexus2, to make spanning tree block that uplink, and allow traffic between the nexuses to go over the 2x 10GE portchannel instead of over the core switches. I have attached a drawing of this.
Maybe I shouldn't use the management IP:s for peer keepalive? Does the peer keepalive need to be on a different physical link than the peer-link?
Regards,
Johan

We are not using the management ports for management, but an ordinary Vlan Interface in the default vrf, as seen below. We can of course change that and instead use the mgmt0 port if that is the best approach.
vrf context management
vlan configuration 1,100
vlan 1
vlan 100
name DMMgmtPriv
vpc domain 1
role priority 2000
system-priority 4000
peer-keepalive destination 192.168.105.40 source 192.168.105.39 vrf default
interface Vlan1
interface Vlan100
no shutdown
no ip redirects
ip address 192.168.105.39/23

Question about ODI execution log

Hi guys,
I need to delete the result of the execution of a package I'm referring to get in a table if the scenario runs with status of warning, mistake or sucess. I can see the values in the operation.
Do you know uin which table ODI stores this values?
Thanks in advance.

ORV wrote:
Hi guys,
I need to delete the result of the execution of a package I'm referring to get in a table if the scenario runs with status of warning, mistake or sucess. I can see the values in the operation.
Do you know uin which table ODI stores this values?
Look for SNP_SESSION
SNP_STEP_LOG
Thanks in advance.

Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in. Thanks

Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in.

You don't. Email comes in either by push or when you invoke the email app. Ther is no password except when you first set up the account. If your iPad is not being used as your personal device and you need to shield emails from other users, then don't use the email app. Instead, use web mail if available from your provider.

Urgent - Question about logging and debugging.

Hi,
I have a question about the logging and debugging supported by
Weblogic 6.0. From what I understood by reading the documentation
it has classes e.g. NotCatalogLogger class for logging the information.
The class has one method callded
debug() for writing the debugging information. I want to log the
debug messages only in some situation. Can I control this using
some property? Because the documentation says that the debug information
is logged only if application is running in debug mode. Now how
do I change the mode of an application??
Thanks and Reagrds,
Manoj

Hi,
I have a question about the logging and debugging supported by
Weblogic 6.0. From what I understood by reading the documentation
it has classes e.g. NotCatalogLogger class for logging the information.
The class has one method callded
debug() for writing the debugging information. I want to log the
debug messages only in some situation. Can I control this using
some property? Because the documentation says that the debug information
is logged only if application is running in debug mode. Now how
do I change the mode of an application??
Thanks and Reagrds,
Manoj

Question about imap log format.

I hava a question about imap log file.
Here are sample imap log lines
[26/Dec/2005:13:21:24 +0900] mail imapd[513]: Account Notice: close [203.231.11.113] ywmoon 2005/12/26 13:21:24 0:00:00 1013 2843 2
[26/Dec/2005:13:21:32 +0900] mail imapd[513]: Account Notice: close [203.231.14.251] hkchoi 2005/12/26 13:20:37 0:00:55 446 1196 0
Above line...
First line
ywmoon : UserID
2005/12/26 : Date
13:21:24 : login time (hour:minute:second)
0:00:00 : ?
1013 : bytes from client to server
2843 : bytes from server to client
2 : ?
next line
13:20:37 : same above
0:00:55 : ?
446 : same above
1196 : same above
0 : ?
From above, I don't know "?" mark fields.
0:00:00 or 0:00:55 ==> expenditure time to login ? And is this "hour:minute:second" OR "minute:second:milliSecond" ?
2 or 0 ==> 1 means INBOX. 0 and 2, what they are mean ?
Thank you in advance...

I hava a question about imap log file.
Here are sample imap log lines
[26/Dec/2005:13:21:24 +0900] mail imapd[513]: Account
Notice: close [203.231.11.113] ywmoon 2005/12/26
13:21:24 0:00:00 1013 2843 2
[26/Dec/2005:13:21:32 +0900] mail imapd[513]: Account
Notice: close [203.231.14.251] hkchoi 2005/12/26
13:20:37 0:00:55 446 1196 0
Above line...
First line
ywmoon : UserID
2005/12/26 : Date
13:21:24 : login time (hour:minute:second)
0:00:00 : ?how long the connection lasted.
1013 : bytes from client to server
2843 : bytes from server to client
2 : ?Number of messages?
that's a guess. we don't actually document this stuff.
>
next line
13:20:37 : same above
0:00:55 : ?
446 : same above
1196 : same above
0 : ?
From above, I don't know "?" mark fields.
0:00:00 or 0:00:55 ==> expenditure time to login ?
And is this "hour:minute:second" OR
"minute:second:milliSecond" ?
2 or 0 ==> 1 means INBOX. 0 and 2, what they are mean
Thank you in advance...

Nexus 5596 Ethernet Port Configuration

I have a Cisco Nexus 5596 with 48 Ethernet Ports (two of which are now configured for Fibre Channel). It has a FEX attached to it as well.
I was able to configure ANY Ethernet port with the typical interface commands when in interface configuration mode. However, I can now only configure existing and new Port Channel interfaces, FEX ports and standard Ethernet ports that have never been configured before.
If I try to configure an Ethernet interface that was configured in the past, I only seem to have access to global interface commands when in interface configuration mode. I can set spanning-tree, duplex, speed or any other interface parameters. The CLI acts like I'm not in interface config mode, but the prompt shows that I am.
Anyone else seen such a thing? I am logged in as admin.

Hi Mark
I suspect the interface in question is configured to be in a channel. Once an ethernet interface is configured to be in a port-channel. most interface commands need to be configured under the port-channel interface
Thanks
-Prashanth

Problem reset Nexus 5596

Hello,
Some equipments Nexus 5596 from a customer have reinitiated and it seems to have been provoked by an OSPF problem although I am not sure.
The logs from the equipment show:
2013 Jan 9 07:29:42 ROISBPRE2CN %BTCM-5-BTCM_LOG_L3_READY: system becomes L3 Ready
2013 Jan 9 07:29:44 ROISBPRE2CN %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by on ppm.3726
2013 Jan 9 07:29:45 ROISBPRE2CN %OSPF-5-ADJCHANGE: ospf-1 [3236] Nbr 180.101.250.26 on Vlan902 went TWOWAY
2013 Jan 9 07:29:48 ROISBPRE2CN %OSPF-5-ADJCHANGE: ospf-1 [3236] Nbr 180.101.250.29 on Vlan902 went TWOWAY
2013 Jan 9 07:29:49 ROISBPRE2CN %OSPF-5-ADJCHANGE: ospf-1 [3236] Nbr 180.101.250.28 on Vlan902 went TWOWAY
2013 Jan 9 07:29:52 ROISBPRE2CN %OSPF-5-ADJCHANGE: ospf-1 [3236] Nbr 180.101.250.17 on Vlan902 went TWOWAY
2013 Jan 9 07:29:52 ROISBPRE2CN %OSPF-5-ADJCHANGE: ospf-1 [3236] Nbr 180.101.250.29 on Vlan902 went FULL
2013 Jan 9 07:29:52 ROISBPRE2CN %OSPF-5-ADJCHANGE: ospf-1 [3236] Nbr 180.101.250.26 on Vlan902 went FULL
2013 Jan 9 07:30:41 ROISBPRE2CN %ETHPORT-5-IF_DOWN_INITIALIZING: Interface port-channel902 is down (Initializing)
2013 Jan 9 07:30:41 ROISBPRE2CN %ETHPORT-5-IF_DOWN_INITIALIZING: Interface port-channel100 is down (Initializing)
2013 Jan 9 07:30:41 ROISBPRE2CN %ETHPORT-5-IF_DOWN_INITIALIZING: Interface Ethernet1/31 is down (Initializing)
2013 Jan 9 07:30:41 ROISBPRE2CN %ETHPORT-5-IF_DOWN_INITIALIZING: Interface Ethernet1/32 is down (Initializing)
2013 Jan 9 07:30:41 ROISBPRE2CN %ETHPORT-5-IF_DOWN_PORT_CHANNEL_MEMBERS_DOWN: Interface port-channel112 is down (No operational mem
bers)
2013 Jan 9 07:30:41 ROISBPRE2CN %ETHPORT-5-IF_DOWN_PORT_CHANNEL_MEMBERS_DOWN: Interface port-channel111 is down (No operational mem
bers)
I wanted to know if you know something about a problem with OSPF in next version:
cisco Nexus5596 Chassis ("O2 48X10GE/Modular Supervisor")
Intel(R) Xeon(R) CPU with 8263880 kB of memory.
bootflash: 2007040 kB
Kernel uptime is 0 day(s), 2 hour(s), 25 minute(s), 35 second(s)
System version: 5.1(3)N1(1a)
Thank you very much.

OSPF logs say that your switch is fully adjacent with 180.101.250.26 and .29, this means normal operation.
Bi-directional communication has been established between the Nexus and 180.101.250.17 and .28. They are in the middle of the OSPF neighboring process.
Some interfaces are initializing, and Po111 and 112 have no member ports (the channel-group <111|112> command hasn't been issued on any physical interfaces).
More information about OSPF neighbor states can be found here.

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

Questions about Indexing and Using an Indexing POA

Although I have only about 50 users, at least 15 of them have in excess of 100,000 messages in their accounts and the POA (version 7.0.2) is regularly slowing to a crawl. (I just know that plans for revolution are fomenting!) I have embarked on a campaign to reduce these accounts by archiving everything off to get mail accounts down to 3000 or fewer pieces. I have achieved user buy-in, but have worked on only a few users so far.
In another closely related thread, it was suggested to me that the PO speed issues relate to broken indexes. And I suspect that given so many messages, the indexes were never getting fully rebuilt with the default QF POA settings. I am trying to fix that situation in addition to reducing mail account sizes. So, I have set up a second POA on another server and dedicated it to the indexing task. The /qfinterval is set for 1 hour, other /qf switches at default. The POA-QF does no mail delivery, but it does do nightly user upkeep.
The POA-QF seems to be steadily working away and making progress at reducing the number of unindexed messages. However, I have questions about what I am seeing and what more I can do:
1. Is the progress I am seeing real progress? For example I have a user with over 100,000 messages to be indexed and every time I check the logs, the count drops by about 500 messages per hourly QF cycle. I assume that if I just let it keep running, it will eventually get caught up and fixed. Not only with this user, but with all the others as well. Will my patience (and theirs) be rewarded? Are there any gotchas I need to prepare for?
2. One user has recently had virtually all of her messages successfully moved to archive. I can see them in the Archive, and do not see them in the online account. However, now over a week later, QF still shows >130,000 items still left to index for that user. The POA-QF is making slow, steady progress reducing that number, but why is this user's QF count still so high? Does it just need more time, or is there something amiss for this user?
3. I may want to rebuild indexes for single users from scratch. I have seen the TID 3105742 which tells how to do this: Essentially you turn off mail delivery functions, and make some other switch changes to dedicate the POA to indexing for just a single user, and then you let the POA rebuild the indexes. The implication of that scenario is that the POA is now enjoying exclusive access to the user's databases.
If I want to use my secondary POA-QF to rebuild a user's index from scratch, does the main POA have to be offline and the user out of GWise? That is, Does the QF process require exclusive access in order to rebuild indexes from scratch?
Thanks for any thoughts or suggestions.
Peter Smick

pgsmick wrote:
> 1. Is the progress I am seeing real progress? For example I have a user with
> over 100,000 messages to be indexed and every time I check the logs, the count
> drops by about 500 messages per hourly QF cycle. I assume that if I just let
> it keep running, it will eventually get caught up and fixed. Not only with
> this user, but with all the others as well. Will my patience (and theirs) be
> rewarded? Are there any gotchas I need to prepare for?
Set this switch for this indexing POA - /qflevel=999 - this will index
everything in one run. It will take a long time, but with no qflevel switch you
are indeed only indexing 500 messages at a time, and if the user has that much
mail, it might never really catch up.
>
> 2. One user has recently had virtually all of her messages successfully moved
> to archive. I can see them in the Archive, and do not see them in the online
> account. However, now over a week later, QF still shows >130,000 items still
> left to index for that user. The POA-QF is making slow, steady progress
> reducing that number, but why is this user's QF count still so high? Does it
> just need more time, or is there something amiss for this user?
>
This is odd, because really the index count should drop to nothing, but with the
above switch this might get resolved as well.
> 3. I may want to rebuild indexes for single users from scratch. I have seen
> the TID 3105742 which tells how to do this: Essentially you turn off mail
> delivery functions, and make some other switch changes to dedicate the POA to
> indexing for just a single user, and then you let the POA rebuild the indexes.
> The implication of that scenario is that the POA is now enjoying exclusive
> access to the user's databases.
Not really - the POA is not enjoying exclusive access to the user's database,
the indexer is just avoiding an attempt to index anything else.
> If I want to use my secondary POA-QF to rebuild a user's index from scratch,
> does the main POA have to be offline and the user out of GWise? That is, Does
> the QF process require exclusive access in order to rebuild indexes from
> scratch?
No - QF never requires exclusive access. That said, you may find that an
extremely vigorous QF can cause slowdowns for the user.
Danita
Novell Knowledge Partner
Moving GroupWise to Linux?
http://www.caledonia.net/gwmove.html

Legality questions about Home Sharing

I have some legality questions about Apple's Home Sharing technology.
As I understand it, you can share (that is, copy it from one computer to another) your music, movies, applications and other iTunes-managed files amongst five computers. The only 'trick' is that each computer must have an iTunes Store account and must be logged in in order for it to work.
My question concerns the copying aspect and the legality of it. For content that was purchased through the iTunes Store I can see how Home Sharing can provide a limitation on content sharing, since all of the machines would need to be connected to Apple's servers in order for the validation process to happen. But what about content that was added to iTunes through other means, e.g., ripping my own CDs or converting my DVDs? These items can still be copied via Home Sharing and as there's no DRM on them there's no way they can be protected against "illegal" or "unauthorized" use.
It was my understanding that if I gave a copy of a song to someone else, that's illegal. Apple's Home Sharing technology seems to facilitate this action. If I rip a CD or DVD into iTunes and someone copies it out, isn't that making an illegal copy? Can I be held liable for distribution of content?
And how far does this extend? If I live in a house with four unrelated people, are they legally (?) allowed to copy music and media amongst each another? Is there a perceived or actual difference between using Home Sharing to copy a movie versus, say, using a USB flash drive? And what if one of them moves out? Am I legally obligated to go through that person's hard drive and remove content that they copied from me before they leave the building?
Does Home Sharing somehow retroactively change the copyright application on a given CD or DVD? Most of my CDs and DVDs contain notices and warnings against distributing copies. Can these warnings now be ignored, or at least amended with "...unless you're using iTunes Home Sharing" at the ends of them?
I am not trying to stir up a hornet's nest here. I'm only trying to better understand the legal issues surrounding Home Sharing and particularly how they relate to unprotected content. It seems very contradictory that the RIAA and MPAA would be fighting so hard against peer-to-peer services like BitTorrent and Gnutella while apparently allowing peer-to-peer services through iTunes Home Sharing.
Furthermore, I also understand that the intention of this system was to allow families who are living together to have common access to all of the "household" music, but my issues aren't about this. I envision, for example, a college dorm building where there's several hundred people living together on the same network subnet, and all of them have Home Sharing enabled and everyone is copying thousands and thousands of songs to/from one another. Is this now legal?
Any insights would be appreciated. Thanks.

If I rip a CD or DVD into iTunes and someone copies it out, isn't that making an illegal copy?
RIPping of commercial, encrypted DVDs (most of them) is illegal to begin with. Or rather, breaking the encryption on a DVD is illegal and in order to RIP the DVD, you must break the encryption. SO you have already "broken the law" by having a copy on your computer.
Most of my CDs and DVDs contain notices and warnings against distributing copies.
Most of your DVDs have a notice about even simply making a copy, not only distributing copies.
Much of your post has been cussed and discussed by many, many people (lawyers, corporations, organizations, individuals, etc.) and no one has come (or likely ever will come) to a complete agreement.
Generally, "sharing" in the same house hold amongst family members seems to be okay. Outside the same household/family is almost always not okay.
I envision, for example, a college dorm building where there's several hundred people living together on the same network subnet, and all of them have Home Sharing enabled and everyone is copying thousands and thousands of songs to/from one another. Is this now legal?
No.
This is exactly what Napster was and why they were sued & shut down.
I imagine Apple lawyers have done their homework as well as consulted with the labels to discuss these exact issues.
And it's called "Home Sharing" to indicate that it is not "Dorm Sharing" or "Workplace Sharing", or even simply "Library Sharing"etc. even though it may be possible to use it in other places than the Home.
Users on other computers need to know your iTunes ID and password to enable it Home Sharing. Likely this is how Apple got the lables to be okay with it.
Are you gonna give (and get) dozens/hundreds/thousands/any other users your iTunesID & password?
You can contact Apple Legal here -> http://www.apple.com/legal

Question about Nexus 5596 log.

Similar Messages

Maybe you are looking for