Question about operating system

Hello.
I just got lenovo T400. I have question about operating system. I choose OS (Windows XP Professional preinstalled through downgrade rights in Genuine Windows 7 Professional). When I get the laptop, Windows XP is preinstalled but I don’t know how to upgrade to Window 7. Please, tell me the way to upgrade.
Have a nice day

you'd need the disks, and would need to do a fresh install, i.e. you can't just upgrade it. everything will be gone
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

Similar Messages

Question about operating system reinstall on Portege R500

I have purchased the R500 64SSD version, and for some reason it never struck me to check if there was a DVD drive on it.
That was rather embarassing.
I know it is easy to purchase an external drve to copy software etc on to the Portege, so that isnt so bad.
However, I am considering a re-install, possibly to XP, but maybe just to reduce the repulsive amount of bloatware i got on my machine when i switched it on.
Now to the crux of the matter: if i use an external USB disk drive, i need USB drivers. If i delete the OS, that will delete the drivers.
So, finally, my question is: How in the name of Hell is anyone supposed to put a fresh install into an R500?
Thanks for your patience.

I understand everything till the point with the bloatware.
But what I dont understand is: what do you want with a USB disk drive? I hope you dont mean a USB-HDD (its a little bit confusing). ;)
Usually you can use all drives without the need of some drivers because the machine offers you the option to boot from a USB device after powering the machine up and see the Toshiba logo pass...
You must only press F12 and choose the option to boot from an external USB CD/DVD drive. Thats all.
Greets

Question about operating systems and flash storage

im looking to buy an 11 mac air and would like to know what the difference between 2.ghz,i7,128 flash storage,4000 graphics and the 1.3 ghz,i5,256 flash storage, 5000 graphics. ??

Go to Apple's website and study the specs.

How to collect info in AD about operational system, installed on all computers in AD domain?

The problem is to collect info in AD about operational system, installed on all computers in AD domain?

The problem is to collect info in AD about operational system, installed on all computers in AD domain?
In addition this is a nice article which covers your needs with good explanation:
Count the number of Windows XXX computers with PowerShell and Active Directory
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Question about source system copy for BW

Dear all,
I have a quick question about copying a source system for BW.
We have two clients in the source ERP:
100 Customizing
200 Testing
Our BW is only linked to client 200, so when we now delete client 200 and make a copy from 100 to 200, are we then still able to restore the source system connection so that our extraction will work, or will it fail, as in client 100 I have no BW related (except the cross-client-objects like datasource) information, that can be used for a possible restore of this connection.
What is the procedure in this case?
Thanks,
Andreas

Unfortunately, you will lose your source connection and need to create a new one in R/3. You can use the same source system name in BW, but check the source system connection after the copy (SM59). Also, I would "Restore" the source system (in BW, right-click on Source system in RSA1, and click "Restore") to insure the datasources get replicated from R/3 to BW.
Depending on how much you want your BW and R/3 systems to be in synch, you will need to rebuild all your data providers (cubes/ODS's) from your R/3 system. This means deleting all the data and running the initializations from scratch. At the very least, you will need to rebuild the delta queues.
Curious, if 100 is just for customizing, is there any data in it? Are you just creating a new blank client 200?

Quick question about making system calls

hello all
i have a simple quick question regarding making system calls. Basically I want to mimic the command "system" for perl. I am not quite sure how to do this for java.
any feedback would be appreciated.

look at:
java.lang.RunTime

Question about speaker system

hi guys hows it going? I got a question about the creative inspire 5.1 P5800. So far I got the front and center speakers working, and the sub woofer. But i've tried everything to make the rear speakers work and they just wont work!! Think anyone can help me out with this problem? Thanks in advance.

alfredo,
What sound card are you using? If you are using Creative card, try turning on the CMSS feature. You can check out the Knowledgebase article for the steps.
http://us.creative.com/support/kb/ar...p?l=2&sid=4883
Jason

Questions about "Restore System From Time Machine"

Looking to fix an apparent system corruption problem on my work machine, I discovered the "Utilities > Restore System From Time Machine" option of the Leopard installation disc. I have some questions that are not answered in http://support.apple.com/kb/HT1177:
1. Does this option erase the hard drive and install a fresh system from DVD, or do I need to do that in a separate step?
2. What about software updates - when are they applied?
3. Will third-party system extensions be reinstalled OK?
4. I tried launching the process on my home machine, just to see how it works. At work I have a dedicated disk for Time Machine, but at home I have a Time Capsule, serving two Macs via Ethernet. I've also configured the TC to give us a shared volume; so in normal operation I have two network volumes, <Username>, containing Time Machine's sparsebundle file for that user's Mac, and "Shared". When I boot from the installation DVD and run "Utilities > Restore System From Time Machine", the backup volume list only shows the "Shared" volume. If I select it, I'm prompted for my TC username and password; I enter it, TC spins up, and then nothing. I cannot continue the restoration process, and reselecting the "Shared" volume does nothing. ???
Thanks in advance for your help.
-- Phil

For the record, here's what I've found out so far:
1. The "Restore System From Time Machine" option seems to want to restore everything, including the system, from the Time Machine backup. I wanted a clean system install, so I did an "Erase & install" followed by a "Restore from Time Machine" in the Migration Assistant. That got me most, but not all, of my settings back; exceptions include the printer configurations, the desktop picture, and the Dock settings.
2. Software updates can be applied after the new system is rebooted.
3. Most 3rd party extensions seem to have been restored OK, but some (like MacFuse) were not.
4. I'd still be grateful for any hints concerning how to get "Restore from Time Machine" to work with a Time Capsule.
-- Phil

Some questions about iOS system framework, APNS and so on

Hi everyone!
im quite interested in iPhone developement.by reading some dev books of iOS i can learn the general steps of creating an iPhone app. however, i cant find much of iPhone's system archetecture or framework information on the internet, so sometimes i was confused by the running process and principle of an app. so, im wondering cannnnnnn u guuuuuuuuuys doooooooo meeeee a little favor by answering the following questions and i appreciate that:
1. can u recommend some articles or sites from which i can take a look at the system framework of iOS?
2.'backgrounder' is an application for jailbroken iPhone to run an app in the background, i.e. multitasking. do u know what's the principle of 'backgrounder'? can u offer some links that i can get more information of 'backgrounder'?
3,the function of Multitasking, as Apple mentioned in the release of iOS 4, brought another word 'APNS', i.e. apple push notification service. i googled APNS and learned that the servers are provided by Apple and perhaps the servers are located in the U.S. so im wondering, if im using PUSH message, does that mean each PUSH message gotta travel between my country and America twice? if it's true, its gotta cost a lot and there'll be huge delay! and since APNS are maintained by Apple, is it correct to say that Apple can read every PUSH message? and the last question, there're lotta companies providing PUSH messages, and is Apple able to handle all the PUSH flow? that's really great burden i think!
im a college student and an iPhone rookie, and people around me dont know too much about Apple and iPhone, so i have to ask professionals like u for help. ur reply can really help me a lot and im looking for ur reply eagerly. sorry for my poor english and THX a million.

A good place to ask question regarding the Actor Framework is in the community:
https://decibel.ni.com/content/groups/actor-framework-2011
And yes I have used and is using the Actor Framework.

Question about heat & system fan ? with Corecenter software?

hello guys,
i am having some strange experience well i just happened to clean my CPU well just external clean with cloth well then when i started i heard sound of some sort it turned out to be a plastic piece with the fan anyway i just did not do anything else well recently my CPU is very running cool i mean does System temeperature goes high will my CPU fan go high too i mean i dont' get a reading for my System fan speed in corecenter why ? can i do something about it please tell me. ? should i check the inside of my CPU well i am no expert but i am still ameteure well what do you say

I don't think CoreCenter uses the system temperature to control fan speed.
Is your cpu fan still working? When you say a plastic piece is broken, do you mean a fan blade? If so you should replace the fan.

Question about transport system configure

I have two system dev & prd, the prd is domain controller, the router is from dev to prd.
I want to delete all transport configure and reconfigure it.   Now I login to prd 000, and delete dev from transport system, and use se06 to initial the stms, then I go to stms, the configure has been initialized.
But when I login dev000, the two systems configuration and the transport router is still exist in stms and I can not use se06 to inital it.   I am sure that in prd 000, the configuration has been deleted succussfully.
the configuration is still exists in dev000, and I can not do any operation from dev000 which is not domain controller, and the real control prd000 has been delete by me.
I try to use se06 , but after reinstall cts, I can still see the configuration in stms.
Could you give some solutions , Is there any problem with my operation?
thanks a lot.
Edited by: victor on Jan 11, 2009 9:17 AM
Edited by: victor on Jan 11, 2009 11:07 AM

Hello Victor,
you said PRD is the domain controller and successfully you
deleted previous configuration in PRD ,now login into DEV and
in the same delete the cofiguration in DEV too.when everything
is cleared you start from the first and start adding DEV to the
domain PRD.hope this helps.
regards,
Manjula.

Question about AAS System 9

Well finally I resolve the problem with my partitions between different servers, we put all the applications in only one server but we see that if you add too much analytic services servers on the AAS we have the same problem with the "ERROR 1056550: Unsolved hostname" , so we remove the other analytic servers from our AAS fro create the partitions, so I question myself if there's some configuration parameter of the AAS or Analytic Services that I need to configure to don't have the same problem and if I can add my other Analytic Server to my AAS without have the same problem and get the same ERROR, Anybody knows something about it?? Any help will be appreciated. Thank's in advance.

Here is part of an entry that I posted in my blog about almost two years ago that might help
http://glennschwartzbergs-essbase-blog.blogspot.com/2008/08/partitions.html
The other day I ran into a problem that I never expected. I built a partition and every time I saved it, it showed as orphaned. Interestingly enough, it still worked, don’t know why, but it did. After trying different things to fix it, different ID, using MaxL to define it, trying it on different cubes, simplifying it, etc, I had to go to support for an answer. They gave an answer that I didn’t expect. I had to change the Essbase server names from friendly network names to the IP addresses. Seems it had problems understanding the friendly name.

Question about ++ operator

int i = 0;
i = i ++;
System.out.println(i);
the result is 0.
i know the executing sequence is: first =, then ++.
but, ++ operator DOES execute. so, if it doesn't affect the i's value, then it affects what?
anyway, i couldn't understand why the output is 0!

i know the executing sequence is: first =, then ++.Check that precedence table again. ++ is a full 13 or 14 levels higher than =.
This means that i = i++; is equivalent to i = (i++);Because i++ == 0, the above statement has the same effect as i = 0;

Question about moving system board from domain C to domain B SF2000

Hello,
i would like to move the system board e this is my configuration:
Domain A with Domain B Solaris 10 Sun cluster 3.2
Domain C Solaris 10 no Sun Cluster.
I move the sytem board SB7 from domain C to domain B with the command from System Controller:
# moveboard -d B -r 2 -t 900 SB7
This command can be done during normal operation and it's totally transparent to Sun Cluster domain A-B.
Thankls

The subject line of your post mentions a "SF2000".
Could you actually mean you have a Sunfire E20K ?
[http://sunsolve.sun.com/handbook_pub/validateUser.do?target=Systems/SunFireE20K_R/SunFireE20K_R]
If yes, then I suggest you contact your local Sun Support Center and open a proper support case.
Get assistance from engineers specifically available for such expensive systems.
This is just an anonymous user-to-user discussion forum.

Question about OO Systems

I've been wondering this for a while now.
I had to design and build a software system for college as a project and i was going to design the classes attributes methods etc. but then i realized i would need a database to store the information and i could simply build an application on top of the database and query, update and store any information that was needed. I simply could not see any need for using OO design. I asked my lecturer about it and he agreed with me so that didn't help!
Can anyone tell me why we need to organize data in objects when we already have a relational database system?
Cause i really don't get it.

Jahvah wrote:
I'm doing a module this year called Object Database Systems and it sounds like it may help my understanding of these issues:
+"This module is an advanced module in the study of database systems. It concentrates on+ +current and emerging developments in object-oriented database systems, object-relational+ +database systems, semi-structured database systems, XML and related technologies. While+ +object-oriented database systems may not be considered mainstream, some of the concepts+ +and approaches are important and elements can be seen within the more mainstream+ +development of object-relational database systems. The module examines standards in these+ +areas, namely the ODMG Object Model/Object Query Language, the latest SQL standard+
+(which incorporates support for both objects and XML), and a number of the XML standards,+ +principally XPath/XQuery.++Given the importance of database systems to the development of modern information systems,+
+this module will provide extremely valuable knowledge and skills for a range of jobs, such as+ +software developer, systems analyst, system designer, database professional, and software+ +consultant."+
I would say that the conclusion in the above is false.
Object type databases have been around for a long time and they are used very seldom. So seldom that it is effectively zero.
And certainly nothing that I have seen would suggest that object query languages are going to pervade the market in an significant way.
This is in constrast to relatively recent idioms that have in fact have made extensive impact on the industry such as Java, C#, XML, Agile, functional programming (and additions to existing languages to support it). The first four came into existence after object type databases and the last has been gaining interest over time.
At best learning about object type databases is more of curiosity than anything else. Learning assembly is probably more useful even though using it is as likely (for most industries.)

Question about operating system

Similar Messages

Maybe you are looking for