Question about oradim and windows services

Hello.
I have a db instance on my W-XP Pro machine that was created with this command:
oradim -new -sid <my_sid> -startmode m -pfile <my_pfile>
Since the creation I only used to need to start the windows service in order to work with the db.
I decided to delete the instance.
oradim -delete -sid <my_sid>
Afterwards I recreated the instance:
oradim -new -sid <my_sid> -startmode m -pfile <my_pfile>
And now I have this strange situation:
First I need to start the windows service (although it does not startup the db) and then starting the db with sqlplus.
Would it be possible restoring to the initial situation?
Thanks in advance.

Did you tried changing the database startup as Auto
oradim -edit -sid <my_sid> -startmode auto -SRVCSTART
systemThanks.
Although the above solution is working ok, I am also trying your solution but it seems there must be a syntax error:
D:\>oradim -edit -sid <my_sid> -startmode auto -SRVCSTART system
DIM-00036: Ha introducido una opci¾n no vßlida para el comando -DELETE
D:\>oradim -edit -sid <my_sid> -startmode a -SRVCSTART system
DIM-00003: Falta un argumento para el parßmetro
(I am sorry but I do not understand all the oradim options).

Similar Messages

Beginner's questions about WCF and web services

For the purpose of this forum let me just say that I got my certs back in Dot Net 2.0. I know how to write simple web services. Now someone has dumped a huge package of code on my desk that (I think) contains a WCF project (without documentation
of course). Contains references to System.ServiceModel.
So my questions...
1. What (if anything) is the difference between WCF and Web API?
2. If there is a difference, how do you decide which one to use?
3. Assuming that this project on my desk is a WCF project, where can I find some hints on how to run it in VS2013 Community?

WEB API is restricted to ASP.NET and HTTP.
http://captechconsulting.com/blog/john-nein/aspnet-web-api-vs-windows-communication-foundation-wcf
WCF uses more communication protocols than just HTTP, there are more ways to host a WCF service other than IIS, like a selfhosting exe type WCF server, and WCF is a SOA solution.
WCF is a more robust solution in a whole lot of ways is the bottom line.
http://en.wikipedia.org/wiki/Service-oriented_architecture
http://www.codeproject.com/Articles/515253/Service-Oriented-Architecture-and-WCF

File Saving.. question about Mac and Windows..

Hi all!
Just a quick question, is there anything that needs to be considered between saving a file from a java application on either Mac or Windows? Or does java "do" the work and I don't have to worry?
So far I saved some text from using my application on a Mac but havent got to a PC yet, and would rather make the changes now..
Thanks

FYI, this is just on my iphone, not when I view through the web or on my iPad. This is how it looks on my iPhone though... 2 iCloud accounts? Please help.

Question about Local and Central Services Registry

Hi guru,
We are using CE7.2 and have deployed some BPM DC to it.
After deployment, we can see the web service (we made to start the process) from the local SR.
Now we want to build a central SR on aonther machine (AS Java + SLD + SR) and re-point the previous CE7.2's service reg to this central SR. We did it by running the configuration wizard.
I GUESS after the change, the web service in new BPM DC deployment will be automatically published to the CENTRAL SR, rather than the LOCAL, but it didn't happen, am I wrong ?
I'm wondering what kind of situation will cause automatically registration ?
Please shed some light
thanks

Tim,
They will be fully documented in the 11g XML DB Developer's guide.
The documentation is still covered by the beta NDA, so I can't show it to you.
I can describe them, though.
They will work through the HTTP server that is part of XML DB, similar to the way that you can currently access data as XML:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb15dbu.htm#i1025534
Or the way you can call stored procedures through the PL/SQL geteway.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14251/adfns_web.htm#ADFNS015
If there is an 11g XE, I expect native web services would work because they don't depend on Java.
They applied for a patent on it:
http://www.freshpatents.com/Techniques-for-automatically-exposing-as-web-services-procedures-and-functions-stored-in-a-database-dt20060622ptan20060136351.php
Doug

Diff b/w Web service and window service

What is the difference between web service and window service, whether the both are same or not, Give some explain about that each one and give some examples also.

An XML Web service is a component that implements program
logic and provides functionality for diseparate
applications. These applications use standard protocols,
such as HTTP, XML, and SOAP, to access the functionality.
XML Web services use XML-based messaging to send and
receive data, which enables heterogeneous applications to
interoperate with each other. You can use XML Web services
to integrate applications that are written in different
programming languages and deployed on different platforms.
In addition, you can deploy XML Web services within an
intranet as well as on the Internet. While the Internet
brings users closer to organizations, XML Web services
allow organizations to integrate their applications.
A Windows service starts much before any user logs in to
the system (if it has been setup to start at boot up
process). A Windows service can also be setup in such a way
that it requires a user to start it manually ? the ultimate
customization!
Windows services run as background processes. These
applications do not have a user interface, which makes them
ideal for tasks that do not require any user interaction.
You can install a Windows service on any server or computer
that is running Windows 2000, Windows XP, or Windows NT.
You can also specify a Windows service to run in the
security context of a specific user account that is
different from the logged on user account or the default
computer account. For example, you can create a Windows
service to monitor performance counter data and react to
threshold values in a database.

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
Is there any way to get more VRAM to play games on steam?
I've learned by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
So the two questions are...
Is there any way to upgrade my VRAM, so that I can play games on steam?
Why do I only have 256MB VRAM when I have 8GB total RAM?
Other Info:
I have a quad core i7 Processor.
My graphcics card is the AMD Radeon HD 6490M.
I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
THANK YOU SO MUCH IF YOU CAN REPLY,
Dylan

The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included). You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
If you are very much into gaming, the I suggest A PC. They are far superior for that type of application to a MBP.
Ciao.

A few questions about MacBooks and Parallels Desktop.

I have a few questions about MacBooks and Parallels Desktop.
1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
Thanks
Keith

1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
Remember to leave at least 2 or 3 Gb for virtual memory usage.
3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
Good Luck

2 question about GPU and Lens correction ,cs5

Hi
i have 2 questions about Gpu and lens correction in Cs5
1)Filter->lens correction->search online
i get often and almost every connection time out at the first click on search online , at the second click i get no online profile
is it normal?
2) question is about Gpu
it run faster , but talking about ajustament layer
like saturation or vibrance for example
i found with the gpu on , a light slow refresh compared with gpu off
i have set cache levels 6 ,history 20
i guess are the defaul
well i add a saturation layer and move the saturation slide ,increase o decrease saturation
with Gpu Off , the changes are immedially , i mean i can see in real time the increase o decrease of saturation
with Gpu On it takes a few(very few) time more
again is normal ?
don't be angry , i'm going to buy cs5 and i'm unsecure ... the price make a big role
thanks

For what it's worth, I also see a timeout on the first [ Search Online ] click, after about half a minute delay. Second click turns up results immediately. This happens each time Lens Correction is started, even without restarting Photoshop, and in both 32 and 64 bit versions. Also note that I started with one profile listed by default (though from the wrong camera) for my 40D with 28-135 zoom.
I alsow noticed that I was seeing progress bar activity in the Lens Correction dialog while I was typing this (even though Lens Correction was NOT the active window) every time I hit the 'L' key. Strange.
Windows 7 x64.
-Noel

Question about document/literal web service

Hello every body.
I have some question about document/literal web service.
I’ve been working with Axis before.
Axis has four valid signatures for your message-style service methods:
public Element [] method(Element [] bodies);
public SOAPBodyElement [] method (SOAPBodyElement [] bodies);
public Document method(Document body);
public void method(SOAPEnvelope req, SOAPEnvelope resp);
The same I am trying to do with WebLogic API for webservices.
But when I am trying to test web service (public Document method (Document body); )
I have serialized exceptions for org.w3c.dom.Document.
Do I have to write a custom class for org.w3c.dom.Document serialization?
If yes can you give me some idea or example?
The all idea behind this web service is. I have just one web service and mane classes for XML processing. Depends what xml document will be during runtime, web service will be using different class for xml processing. It works fine with Axis, but in case of WebLogic I have some problem.
One more question… How I have to call this web service from java client?
I have seen this example http://www.manojc.com/?sample31 ,
but this web service looks like (Document helloDom()). I need to send Document.
This example works for Dynamic Proxy, but does not work for static call.
Any ideas?? Thank in advance.

Hi,
I am getting a similar issue. I created a Document-style/literal webservice and deployed on Weblogic 9.2 . Then I generated client stubs using clientgen. I get the following exception stack trace:
java.rmi.RemoteException: web service invoke failed: javax.xml.soap.SOAPException:
failed to serialize class java.lang.Objectweblogic.xml.schema.binding.SerializationException: type mapping lookup failure on
class=class com.sun.org.apache.xerces.internal.dom.DeferredDocumentImpl TypeMapping=TYPEMAPPING SIZE=3
ENTRY 1:
class: java.lang.Object
xsd_type: ['http://xmlns.ozarkexpress.com/business/sell']:stns:echoDocumentResponse
ser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@1125127
deser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@18dfef8
ENTRY 2:
class: java.lang.Object
xsd_type: ['http://xmlns.ozarkexpress.com/business/sell']:stns:echoDocument
ser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@15e83f9
deser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@2a5330
ENTRY 3:
class: java.lang.Object
xsd_type: ['http://www.w3.org/2001/XMLSchema']:xsd:anyType
ser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@bb7465
deser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@d6c16c

A question about grub and USB

Hi All
I have a quick question about grub and USB that I can't quite find the answer to by searching. Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this. I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife). I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR. So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick? My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive.
Thanks
Kev

i cant say for hp's
havent worked on any in a while
recent machines have been coupleof dell's , vaio & emachine
which dells do offer it at least the ones i tried , my laptop does(dell)
all home pc's are built by me which do offer to boot individual drives
what hp you getting it may tell in specs
are both discs sata? if so it might not offer this option with 2 drives of same interface
check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
& will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
you may want to consider this in your next venture for pc

One question about Pricing and Conditions puzzle me for a long time!

One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
1-First,my sale order use pricing procedure RVAA01.
2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
4-Next,the Access Sequences PR00 have some Condition tables,such as:
     table 118 : "Empties" Prices (Material-Dependent)
     table 5 : Customer/Material
     table 6 : Price List Type/Currency/Material
     table 4 : Material
5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

Hi,
You said that you are using the T.codes VK31 or VK32.
These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
Pl check using T.code VK11 OR VK12 (change mode)
Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
You can give all the required values and save the conditon record.
Hope this is clear.
REWARD IF HELPFUL.
Regards,
praveen

Three questions about Java and Ftp

Hello, i've the following questions about Java and Ftp:
1- .netrc file is in $HOME directory but i can't access to this directory from java code. The following line producesan Exception (directory doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");
2- .netrc file must have the following permissions: -rw- --- --- but when i create the .netrc file the following permissions are on default: -rw- r-- r--, how can i change this permissions? (In java code, i can't use chmod.....)
3- Are there any way to pass parameters to a .netrc file? If i get to do this i needn't change the permissions because i can't modify or create/destroy this file.
Thanks in advanced!!!
Kike

1- .netrc file is in $HOME directory but i can't
access to this directory from java code. The
following line producesan Exception (directory
doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");$HOME would have to be replaced by a shell, I don't
think you can use it as part of a legal path.
Instead, use System.getProperty("user.home");
Ok, thanks
2- .netrc file must have the followingpermissions:
-rw- --- --- but when i create the .netrc file the
following permissions are on default: -rw- r--r--,
how can i change this permissions? (In java code,i
can't use chmod.....)Yes, you can: Runtime.exec("chmod ...");
I need to use estrictly the .netrc with -rw- --- --- permissions
Yes, i can use Runtime.exec ("chmod ..."); but i don't like very much this solution because is a slow solution, am i right?
3- Are there any way to pass parameters to a.netrc
file? If i get to do this i needn't change the
permissions because i can't modify orcreate/destroy
this file.I don't think so. Why do you need the .netrc file in
Java at all? Writing a GUI frontend?I want to use automatic ftp in a java program and FTP server, the files and path are not always the same, so i can:
- modify .netrc (for me is the complex option)
- destroy and create a new .netrc (is easier but i have permissions problem)
- use .netrc with parameters but i haven't found any help about it
Thanks for your prompt reply!!!!
Kike

Basic question about storage and safety in iMovie '11

A very basic question about storage and safety:
I want to keep a backup of my raw footage on my external hard drive prior to begin working on the movie in iMovie. I want to do this:
1. Upload the digital files from my camcorder to my Desktop *(as opposed to iMovie)*
2. Duplicate that footage/clips.
3. Put the duplicate clips/footage into a folder labeled with the name of that footage (like "Fun At the Dentist" or "Jimmy Learns How to Yodel").
4. Drag the folder with the footage/clips into my external hard drive into a pre-existing folder titled "Backups/duplicates of all of my raw footage/clips." This big granddaddy folder will house all of the child folders of different movies.
5 Then, open up iMovie '11 and import the raw footage/clips from my Desktop rather than from my camcorder.
6. Then I want to make a duplicate of my finished movie and put it in my external hard drive in a "Finished Movies" folder.
I know that the original raw unedited footage will always be in iMovies '11 but I want the original to also exist immediately accessible in my external hard drive.
QUESTION:
Is this viable? Is it wise? (I know it goes an extra unnecessary step, but aside from that.)
*Do you have any precautionary advice?* Should I do something in my iMovies '11 preferences? What?
In earlier years with iMovie '04 or '06 (cannot recall) I made many novice errors and ended up losing audio to my finished movie. I also lost footage.
This time around with iMovie '11 I don't to make such novice, ignorant errors.
Thanks so much for any comments to this question.
-L

Yes I'm sure it will work great for you.
The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

Question about RAC and ASM

Hi,
We are thinking about build RAC using ASM for OEM database. It'll have two nodes, oracle 10g and Hitachi san with solaris ( or linux ). I've few questions about RAC and ASM.
1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )
2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?
3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?
4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..
5) I believe RMAN is the only option for backup since I'm using ASM, correct ?
I'm a newbie to RAC and ASM..
Thanks,

user4866039 wrote:
1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )yes.
2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?in 10g you can, in 11gr2 you cannot. and it might be better to seperate them because it will give you more flexibility with patching.
3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?if you share your oracle_home you won't be able to do rolling updates. so i recommend to keep oracle_homes local.
4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..follow the install guide for your respective version. for 10g you'd install clusterware first, then asm and database is last.
5) I believe RMAN is the only option for backup since I'm using ASM, correct ?pretty much. you could stop your database and dump the raw devices or use asmcmd/asmftp but rman is definitely the best choice
Bjoern

Question about MAXCPU and clearing data cache

Hi all,
We're running MaxDB 7.6.03.15 and have following questions. I apologize for not grouping them together with my earlier set of questions along the similar lines.
1. What would be an appropriate value for our application for MAXCPU when running on a quad processor machine. The application consists of the MaxDB along with 4 windows services and an instance of tomcat. Can we use 4 for MAXCPU or does it always need to be something less than the total number of CPUs on the machine (less than 4 here?). Please advise.
2. When we're doing query execution time analysis we need to be able to clear data cache in between query runs. We achieve this so far by simply bringing the database offline and then online again. The problem with this approach is its time consuming and if we do 100 query runs a lot of time is spent in waiting for the database go from online to offline to online again. Please let us know if there's an alternative faster way to achieve the same.
Thanks for your time.
Sincerely,
Sameer

> 1. What would be an appropriate value for our application for MAXCPU when running on a quad processor machine. The application consists of the MaxDB along with 4 windows services and an instance of tomcat. Can we use 4 for MAXCPU or does it always need to be something less than the total number of CPUs on the machine (less than 4 here?). Please advise.
Of course you may set MAXCPU to 4 - but you risk that the four Usertask UKTs will use up all CPU resources on your system then.
So it is usually better to be rather defensive with this. If you're unsure about the CPU needs of your other services better try out and check starting with MAXCPU 2.
> 2. When we're doing query execution time analysis we need to be able to clear data cache in between query runs. We achieve this so far by simply bringing the database offline and then online again. The problem with this approach is its time consuming and if we do 100 query runs a lot of time is spent in waiting for the database go from online to offline to online again. Please let us know if there's an alternative faster way to achieve the same.
Well, x_cons pagecache_release should do that for you.
But I never was able to really see the effect of it (e.g. reading the pages in again).
If I'm not mistaken in this point - which is pretty easy because the command is rarely used and sparsely documented - it just moves the pages to the lower end of the lru list and thereby making them candidates for getting moved out of cache but not actually doing it.
However why don't you just use the resource monitor to figure out how many pages are touched by your statements?
Then you don't have to bounce your instance.
regards,
Lars

Question about oradim and windows services

Similar Messages

Maybe you are looking for