Question about pending friend request.

I just wanted to know if you can send messages/chat to pending friend requests or people who have deleted you (but didn't block you). I'm trying to chat with someone who deleted me by accident and it doesn't say pending or loading message or anything, as if they blocked me or went offline, it appears to have been sent. Has the message been sent? That's all I'd like to know.

If you have configure the request based provisioning,
check the Auto Save, auto prepop.
Root cause for this, may be after requst there is is some task that is not successfully completed. So make sure about post process after request completed.
-kuldeep

Similar Messages

Pending friend request glitch

when i went on my skype most of the people are offline or online or do not desturb and stuff like that but a freind was online and then it switch to pending freind request because i know i'm there freind on skype but the only thing is that i go on almost every time to talk to my freinds but i can't and i can't send messages to them ether can you help fix it please before this glitch gets out of hand

mont348 wrote:
The message will be visibly clear depending on system or Playstation App the message is received on,you will get a header or part of the message until the message is fully opened. It is good practice to send a little message because many don't like to receive or totally ignore blank friend requests.Yup, if its a name I don't recognise, I check to see if they may be on the forums, if not I delete it If it's someone I recognise from here I don't mind I hate the default message, "will you be my friend please" or something along those lines isn't it ??? sounds desperate

Gamecenter says I have a friend request but I don't

Hello - Gamecenter in my iPhone 5, iOS 7.0.3 shows a badge indicating that I have a pending request. When I load Gamecenter, it also says 1 pending friend request. However, when I load the "friends" section, there are no pending requests. This is only happening on my iPhone, even though the same account is on my iPad and MacBook. None of the other devices have this issue - only the iPhone.
Any suggestions on what could be wrong / how to fix would be appreciated!

Sorry for this long thing, but hopefully it helps.
Have you tried closing the application from the multitasking, then restarting your phone? This could solve the problem. Sometimes our apps just get exhausted and need to restart in the same way our phones need to.
Have you tried logging out and logging back into game center? This can reset game centers information, which should reset friends as well. This can be found in settings>game center
Have you verified your apple ID? Since you're on here I'd guess thats a yes but just in case you haven't go here: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Is your iOS up to date? sometimes servers get upgraded with the updates so older iOS versions might not be compatible in silly small ways (like Game Center not displaying friends).
The other issue could be related to an error my own phone was having. Basically I couldn't add friends (whether I was sending the request or receiving it) or play multiplayer on game center. In that case the issue is in the iPhone/iPad/iPod software itself, which is something we'd all expect (at least I would) when a company creates a new operating from scratch. In this case what's happening is your game center is responding to the iOS restrictions found in your settings menu (even though restrictions are disabled).
To fix this problem
go to settings>general>restrictions
Enable restrictions and choose a password you'll remember in 45 seconds
Scroll to the bottom where you see the section labeled "Game Center"
Now flip the switch on both Multiplayer Games and Adding Friends so both switches are green.
Scroll back to the top and disable restrictions
So let me know if you try any of that and let me know if any of it works.

Question about Quality Gate Management

Hi Solman profis,
I have questions about the transport requests in QGM.
My Solution Manager is 7.1.
I have a Solman project, in which I activated QGM and created a Change and created two transport requests (one workbench, one customizing) attached to it, .
I'm little bit confused by the concept.
My questions are:
1. Why I cannot see the transport requests that I created previously in the DEV system manually? If it's normal, for which reason is this designed like this? If it's not normal, how can I configure to see those requests?
2. What is the difference between the Change here in QGM and the Change in ChaRM?
3. In practice, how should the transport requests be created? By the developer in DEV systems, or by the responsibles in Solution Manager Workbench (Change Management Workbench)?
Thanks a lot!
Edited by: Charlie Red on Feb 13, 2012 12:08 PM
Edited by: Charlie Red on Feb 13, 2012 12:09 PM

For the 3rd question, I think TRs should be created in Change Management Workcenter, is it the correct process?
For the other questions, can somebody give some input?

Getting random friend requests on BBM

I have gotten about 30 friend requests from people i don't know on BBM. Any way I can change my PIN? Any help would be great!

No, u can not change your pin. Some one just probably bc your pin or something. But you can get a brand new phone.

Friends Suddenly Became Pending Contact Request

A friend of mine who had appeared "online" earlier tonight suddenly became "pending contact request". What does this mean? Am I deleted or blocked by him? How can I solve this problem?
Thanks!

I have just had the same issue whereby many contacts became "request pending" most of whom would not disconnect me! I think skype has been comprised? I suggest that the forum managers escalate this issue....!
MyGloria wrote:
A friend of mine who had appeared "online" earlier tonight suddenly became "pending contact request". What does this mean? Am I deleted or blocked by him? How can I solve this problem?
Thanks!
MyGloria wrote:
A friend of mine who had appeared "online" earlier tonight suddenly became "pending contact request". What does this mean? Am I deleted or blocked by him? How can I solve this problem?
Thanks!

Request for a unlocked BIOS for GT70 0ND 202US and question about donation

I am using GT70 0ND 202US。 The current BIOS version is E1762IMS.10R from the official MSI website.
The features I need are basically, exchange the Fn and Win keys, disable a SATA drive.
I also like to play around with some other unlocked features in BIOS, if you would like to provide one.
Also a question about donation, how much I should donate?
Thanks.

Tell EC version used[along with BIOS version] in BIOS Setup, system info.
Quote
Also a question about donation, how much I should donate?
It's up to you, its left to people to decide depend of their possibilities.
Quote
The features I need are basically, exchange the Fn and Win keys, disable a SATA drive.
IE like this:
Quote
I also like to play around with some other unlocked features in BIOS, if you would like to provide one.
oki

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

Important conceptual question about Application Module, Maximum Pool Size

Hello everyone,
We have a critical question about the Application Module default settings (taking the DB connections from a DataSource)
I know that on the Web it is generally suggested that each request must end with either a commit or rollback when executing PL/SQL blocks "directly" on the DB without the framework BC/ViewObject/Entity service intervention.
Now, for some reasons, we started to develop our applications with thinking that each Web Session would reference exactly one DB session (opened by any instance taken from the AM pool) for the whole duration of the session, so that the changes made by each Web session to its DB session would never interfere with the changes made by "other" Web Sessions to "other" DB sessions .
In other words, because of that convincement we often implemented sort of "transactions" that open and close (with either commit or rollback) each DB session not in/after a single HTTP request, but during many HTTP Requests.
As a concrete example think of this scenario:
1. the user presses the "Insert" button. An HTTP request is fired. The action listener is executed and ends up with inserting rows in a table via a PL SQL block (not via the ViewObjects API).
2. no commit or rollback after the above PL/SQL block is done yet.
3. finally the user presses a "Commit" or "Rollback" button, firing the call to the appropriate AM methos.
Those three requests consist of what I called "transaction".
From the documentation it's clear that there is no guarantee that the couple AM istance + DB session is the same during all the requests.
This means that, during step 2, it's possible that another user might reference the same "pending" AM/DbSession for his needs and "steal" somehow the work done via PL/SQL after step 1. (This happens because sessions taken by the pool are always rolled back by default.)
Now my question is:
Suppose we set the "Maximum Pool Size" parameter to very a great number (always inferior to the maximum number of concurrent users):
Is there any guarantee that all the requests will be isolated in that case?
I hope the problem is clear.
Let me know if you want more details.

Thanks for the answers.
If I am right, from all your answers about resource avaiability, this means that even supposing the framework is able to always give us the same AM instance back from the AM pool (by following the session-affinity criterias), there is, however, no "connection affinity" with the connections from the DataSource. This means that the "same AM instance" might take the "a new DB connection", if necessary, from the connection pool of the DataSource. If that happens, that could give us the same problems as taking "a new AM instance" (that is, not following session-affinity) from the beginning, since each time an a new connection is taken (either via a new AM instance or via the same AM instance plus a new DB connection), the corresponding DB session is rolle back by default, clearing all the pending transactions we might have performed before with direct PL/SQL calls bypassing the AM services during the life cycle of our application, so that the new HTTP request will have a clean DB session to start to work with.

What in the hell are all these friend requests?

So about a week ago, I was getting friend requests from FirstName LastName, and was just deleting them. Now, ONLY LAST NIGHT, I have had 16 more requests. What the hell is this and apart from manually deleting ONE INDIVIDUAL REQUEST AT A TIME for the rest of my life, how do I stop it?
Cheers,
Marc

Hi and welcome to the Skype Community,
Please block and report about for these contacts requests as explained in http://blogs.skype.com/2014/05/20/handling-spam-and-unwanted-contacts-in-skype/
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

A lot of questions about my MacBook Air

I am really new to re-using Apple computers.The last time I used an Apple computer was back in 1987 when the school and my family had Apple IIGS computers. I have been using PC's which reqiure Microsoft. I a lot of have questions (10 questions) about my MacBook Air and I hope you good people can and will help me.
Product: MacBook Air
Operating System: Mac OS X Version 10.7.4
1) I Downloaded MacKeeper because I was fooled. I had a bad feeling just before I Downloaded it and I should have listened to my heart. However, I didn't buy it or fully Install it. It was like a test run and then they wanted me to pay almost $100 for it. Thankfully, I didn't because I read it is Malware. I spoke with an Apple Tech at Apple Care and he helped me get rid of it (or so we think). I don't see it anymore on my computer. I read it can slow down your computer. How can you tell if it's really off of the computer?
2) When I open "Finder" and I see that there are people Sharing my computer with me. I went into AirDrop and it reads, "Other people can see your Mac as (my name) MacBook Air when their computer is nearby." I bought a HotSpot and while it's turned on and I selected it as my WI-FI connection I thought it would get rid of these people, protect what I type, me, my items, computer, etc. But it didn't.
I didn't know that I have to buy a exteral CD and/or DVD Player in order to connect to the brand new Modem and Router in one by NetGear. I am so used to PCs and the CD/DVD Players being built inside.
The people at Apple Store told me that there is an internal modem inside, but I don't know how to find it and what to do then. Should I use a Firewall?, An AntiVirus, AntiMalware, AntiSpyware, etc. Apple Care tech told me I don't need to get an AntiVirus.
3) Is there a new kind of Wireless Modem and Router that doesn't require a CD-ROM?
4) When I travel or fly and I am not close to home I was told by Best Buy and Sprint that I had to buy a mobile HotSpot to use the computer (WI-FI) safely. As I typed, I have one. But it's pretty expensive and only gives me 1 hour and 15 minutes per day to Stream. What can I do to use this computer safely Online when I am out of range from a Modem and Router? What do people do when they travel on airplanes?
5) This compter won't let me use "Raid." I think you have to have a newer version. I hard about Raid on the radio from Leo (can't recall his last name) who's a Tech expert.
6) Should I buy a ZipDrive? Apple Store Tech told me that I didn't need a ZipDrive. I just remember the episode of HBO's "Sex and The City" when Carrie looses everything because her copy crashed. Now, of course, I know that's a fictional show, but with PC's and Microsoft I have lost everything when it crashed, frooze up, etc. I know there's iClouds. I heard about Carbonite, but I have read the Pros and Cons about it. Mostly they are Cons about it. I just don't want to do anything wrong and mess up this computer.
7) Should I buy a new Printer/Copier/Scanner because mine is an HP. It's not new, but it works. I even have a CD-ROM for Macs. What about the new product called, "Neat"?
8) Is there a special product that I should buy to do Online Banking and/or other important stuff?
9) I saw and read about iWork in the Apps Store and it sounds cool. I still have alot of friends and colleagues who still use Microsoft. Is iWork good to use? Should I Download it from the Apple Apps Store or can a buy it at Apple? Is there another Word Processing Program that is great and user friendly and will work with Macs and PCs?
10) Should I Update the OS with OS X Mountian Lion Pro from the Apple Apps Store or buy it at Apple Store?
In advance, I wish to thank you in this Apple Support Communites for your help. Have a safe and happy holiday weekend!

1) Here are instructions for removing MacKeeper. Since it mostly consists of manually looking for folders and specific files, if you follow the instructions you either fail to find what you are told to find (because your AppleCare guide gave you complete instructions which you followed) or you'll find some additional files that need to be replaced.
2 & 3) I assume you are looking at the sidebar of a Finder window and seeing Shared and computers under it. Those are computers that you can potentionally share. To do so you'd need an account on their computer and a password. They are not sharing your computer.
AirDrop allows you to create an adhoc network for filesharing and it only functions when you have selected the AirDop item in the SideBar. Actually doing that merely announces to computers in the same network node that your computer is available for a file to be sent to. Even then you have to explicitly allow the file to be downloaded to your computer. Similarly you'd be able to see other computers with AirDrop selected and be able to send them a file - which they'd have to accept.
The only reason your NetGear Router comes with a CD is to install and run their 'easy' step by step configuration program. It can also be done manually with a browser. Read the manual to find the IP address you must enter to access the router's configuration menu. Apple's WiFi routers don't require a CD to install the software because the configuration software is already on your computer.
I do have my firewall turned on. AntiVirus software isn't a bad idea - I use Sophos having tested it for a review for our local User Group and I found I liked it better than ClamAVx which is what I'd been using before. Both are free.
4) I think you were scammed by Sprint and BestBuy. I use hotel, coffee shop, and restaurant WiFi spots and have for years. However, because they can be unsecured, I do not shop online or bank when I'm using them. I also use 1Password and don't reuse passwords so even if a sniffer should grab an account and password that's all it would get - one account.
5) Raid doesn't really make sense with a MacBook Air - a RAID involves 2 or more disks being used as if they were one.
6) Zip drive? No. External hard drive - yes. It isn't a question of if a computer's hard drive will malfunction, it is when. OWC has a nice selection of external drives and the Mac has a built in backup system called TimeMachine. Due to the way TimeMachine works, I've found that your TimeMachine drive should be at least twice as large - and preferably 3-4 times as large as the data you are backing up.
7) if your printer works and it has Mountain Lion drivers, why replace it?
8) Online banking is done with a browser - Use Safari or FireFox
9) If trading files with Windows users is important Mac: Office is your best bet. If not, iWork, Mac:Office, or LibreOffice are all good possibilities.
10) you can only buy Mt Lion via the App Store.

Two questions about Risk Management 2.0

hi experts,
Please find below two questions about Risk Management:
-In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
include "/ORM/LORM_API_SERVICESU10 " in
line 97:
"Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
"parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
"bel."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Do you know where it could come from?
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links?
Thank you !
Regards,
Julien

Hi Julien ,
I have the same error what u described as :-
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links? "
Are you able to solve this. Please let me know how to resolve this???
Thanks
Regards,
Atul

Game Center friend request problems

I've tried to add my friend through Game Center and I sent the friend request fine via email, but when I asked her if she got the request, she said that she did and that on her friends list it said that I was added to her list and that she could see the scores on my games and everything. When she removed me, she sent me a request and I never got one. Anyone else have this problem?
3rd gen iTouch, version 4.1

Be sure to send Apple feedback about the problem.
http://www.apple.com/feedback/

Question about my account

Question about item that has been paid with my credit card

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Question about graphic card

Question about graphic card
my friend has Macbook pro 13 with intel HD 3000 he upgraded his ram from 4 to 8gb and his graphic card updated from 384mb to 512mb why ?
and i have macbook 2010 and i upgraded from 2gb to 8gb and my graphic card didnt upgraded why ? its still 256mb
can someone till me whats the trick !!!

You have a Core 2 Duo MacBook and not a i7 MacBook Pro.

Question about pending friend request.

Similar Messages

Maybe you are looking for