Question about planning using serialization point in transaction S2L

Hello colleagues!
Iu2019ve try to implement the supply of production line (supply area) just in sequence. R/3 received dependent requirements and backflushes of serialization point behind target Supply Area from APO.
Then I got a few dependent demands with indicator u201CXu201D in u201Crequirement is serializedu201D field in transaction S2L. I started the automatic planning but replenishment proposal was created to cover all dependent demands. from the selection horizon (with ind. u201CXu201D and without ). But I need to cover dep. demands only with ind. X in u201Crequirement is serializedu201D field. I looked through SAP help and SPRO but I couldnu2019t find helpful information.
Please, help me to find solution.
Thanks.
Ivan.

Thanks for the feedback. I followed the link but I guess I just don't understand about the extended file system. Is HFS+ the same as Mac OS extended (Journaled).
Basically, yes.
I understand that I guess that case sensitive means just that, but what is the difference between journaled and extended? Does it mena that a log file is only saved for the journaled system?
When a filesystem is journaled, all changes to it are written to a log.
Do most people just format as Extended without journaled? I am about to reformat my iMac and install Leopard on there and I was wondering if I should format using the extended or the extended with journal?
Using the journaling option slightly decreases the amount of space on the drive usable by you and increases the chance of recovering data from the drive if a problem occurred. If you want, you can use the Disk Utility to turn it on and off without erasing the drive again.
(25598)

Similar Messages

Re: Questions about Plan structure

Reply-To: "Duncan Kinnear" <[email protected]>
Q. if you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
A It is better to have them in the same plan.It depends on the design
you have
Q Why should the Managers be separated from their business classes?
A Managers are usually service objects which might require different
resources.
These managers when deployed might be required by several other
applications.
Seperating them as a different plan will help in just using one
installed partition to be
Used by different applications (refer about Reference Partition)
Q If you have the Database managers separate, what scope does each DB
manager cover?
A It is better to have the DB managers in user scope.
It depends on the numbers of users, u have for the system.
Since u are talking about 100 tables. It's a huge system.
It also depends on the user licenses u have for the backend.
Take care that u use proper load balancing of DB Managers for the
system.
Krishna CVSR
GoldStone Softech Inc
>
Hi there,
We are in the middle of designing the structure of a new system.
I have read/heard that it is best to break down the plans into the
following categories:
Business Classes
Managers/Services
Clients
I have a few questions about this structure:
Should related business classes be grouped together in Plans? E.g. if
you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
Why should the Managers be separated from their business classes?
E.g. if there is an EmployeeMgr service which deals with anything to do
with the Employee business class, why separate them in different
plans? If you need the manager to access the class, you will always
need both.
Some of the Forte documentation talks about "Policy" managers and
"Database" managers. How do the functions of these managers differ
for a simple CRUD (Create Read Update Delete) class?
If you have the Database managers separate, what scope does each
DB manager cover? I.e. do you have one for the entire database (over
100 tables in our case), or do you break it down by sub-system?
Thanks in advance for any answers.
Cheers,
Duncan Kinnear,
McCarthy and Associates, Email: [email protected]
PO Box 764, McLean Towers, Phone: +64 6 834 3360
Shakespeare Road, Napier, New Zealand. Fax: +64 6 834 3369
Providing Integrated Software to the Meat Processing Industry for over 10 years
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Reply-To: "Duncan Kinnear" <[email protected]>
Q. if you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
A It is better to have them in the same plan.It depends on the design
you have
Q Why should the Managers be separated from their business classes?
A Managers are usually service objects which might require different
resources.
These managers when deployed might be required by several other
applications.
Seperating them as a different plan will help in just using one
installed partition to be
Used by different applications (refer about Reference Partition)
Q If you have the Database managers separate, what scope does each DB
manager cover?
A It is better to have the DB managers in user scope.
It depends on the numbers of users, u have for the system.
Since u are talking about 100 tables. It's a huge system.
It also depends on the user licenses u have for the backend.
Take care that u use proper load balancing of DB Managers for the
system.
Krishna CVSR
GoldStone Softech Inc
>
Hi there,
We are in the middle of designing the structure of a new system.
I have read/heard that it is best to break down the plans into the
following categories:
Business Classes
Managers/Services
Clients
I have a few questions about this structure:
Should related business classes be grouped together in Plans? E.g. if
you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
Why should the Managers be separated from their business classes?
E.g. if there is an EmployeeMgr service which deals with anything to do
with the Employee business class, why separate them in different
plans? If you need the manager to access the class, you will always
need both.
Some of the Forte documentation talks about "Policy" managers and
"Database" managers. How do the functions of these managers differ
for a simple CRUD (Create Read Update Delete) class?
If you have the Database managers separate, what scope does each
DB manager cover? I.e. do you have one for the entire database (over
100 tables in our case), or do you break it down by sub-system?
Thanks in advance for any answers.
Cheers,
Duncan Kinnear,
McCarthy and Associates, Email: [email protected]
PO Box 764, McLean Towers, Phone: +64 6 834 3360
Shakespeare Road, Napier, New Zealand. Fax: +64 6 834 3369
Providing Integrated Software to the Meat Processing Industry for over 10 years
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Questions about Planning Cost Center - Cost Element

Hi,
I'm trying to find a solution to this customer requirement.
We need to do a transfer between cost center/cost element to another cost center/cost element for a planned value. This is possible using 2 time the KP06 transaction (first adding on the receiver, then decrease on the sender).
We need to do this in only one CO document or with a unique transaction (like KB11N for primary costs). How to do this?
Another question: we try to modify the text of the document (COBK-BLTXT) but we can't find the appropriate transaction (KABP is only display). How to do this task?
Thanks
Regards.

HI,
First Of all lets not have a fight
Now the solution
In Ksv1
Whne u define the segment header in the below tab U define the receiver rule ..
In the Variable portion type define " Planned cost"
Also dont forget to make the tick mark to Planned value in the sender header
then enter the receiver mention the receiver cost object
Regards,
Amit Shinde
Edited by: amitsap7 on Sep 21, 2011 1:57 PM

Question about distance of a point to a segment

The following code uses Line2D.ptSegDist in order to find the closest distance of each point from (0, 0), (0, 1)... to (100, 100). If the distance returned from the method is r (0), then the 1x1 rectangle being drawn is white, but the line drawn in the loops is dotted and not like the one drawn by the Graphics.drawLine method. The line is drawn correctly when r's value is changed to 0.5, but I do not believe that that is the proper way to handle the value returned, because if the line is diagonal (0, 0, 10, 10), then r can remain as 0. My goal is to test to see if a point is contained on a given line. I can achieve this by using the Bresenham line algorithm, but I was wondering if it's possible to do it using the Line2D.ptSegDist method, and if so, how could I go about doing this?
import java.awt.Color;
import java.awt.Graphics;
import java.awt.geom.Line2D;
import javax.swing.JFrame;
import javax.swing.JPanel;
public class PtSegDistTest extends JPanel {
    private final double x1 = 9;
    private final double y1 = 22;
    private final double x2 = 19;
    private final double y2 = 92;
    private final double r = 0.0;
    @Override
    public void paintComponent(Graphics g) {
        super.paintComponent(g);
        for (int i = 0; i < 100; i++) {
            for (int j = 0; j < 100; j++) {
                g.setColor(Line2D.ptSegDist(x1, y1, x2, y2, i, j) <= r
                        ? Color.WHITE : Color.BLACK);
                g.fillRect(i, j, 1, 1);
        g.setColor(Color.WHITE);
        g.drawLine((int) x1 + 10, (int) y1, (int) x2 + 10, (int) y2);
    public static void main(String[] args) {
        JFrame f = new JFrame();
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.add(new PtSegDistTest());
        f.setSize(250, 250);
        f.setVisible(true);
}Thank you for your help.

Thank you for helping me to understand. I was hoping that I could use the method in order to test to see if a point was on the line by using the distance method. The Bresenham line algorithm works fine, but do you know of any other way (just out of curiosity) that doesn't involve going through each individual point on the line that would achieve similar results?
What I'm trying to do is take two arbitrary points with a distance of 15, and see if any other arbitrary points fall between that line. I've found that the margin for "pixels sufficiently close to the line" is 0.5 (as noted above), but when I use this margin, some different points appear and are missing in comparison to the Bresenham line algorithm
Edited by: batj on May 16, 2010 6:23 AM

Question about Automator using Spaces.

I don't think this is the right place for this question, but I figured I am probably going to need to write an applescript to do what I want, so I decided to put it here.
I have an automation to open some Word documents on my idisk, then open Dictionary, then open Safari with some tabs. But the problem comes in with spaces. I have Word and Dictionary open on Space 1 and Safari open in Space 3. When the automation ends, I end on Space 3 and would like to know how I add a function to set the focus back to Space 1. It's not all that detrimental to the success of my Automation, but I only use Safari for research and would like to focus to end back on word. I have tried switching which apps open first, but I still end up on the 3rd Space.
My other question is, where can I go for reference to commands in Xcode and AppleScript that deal with Spaces? I love using that function and I have had some ideas about scripts that could help me with them, but I don't even know were I would start with commands.

There are several solutions to this.
The first option would be to send the appropriate key command to switch to space 1. If you've left your preferences as the defaults then you can:
<pre class=command>tell application "System Events" to keystroke "1" using {control down}</pre>
Which will send a Ctrl-1 and switch to space 1.
An alternative, which may be even better, is to activate the application you want to be frontmost:
<pre class=command>tell application "Microsoft Word" to activate</pre>
This should activate the application and switch to that application's space.

Question about multiple RequiresNew in Entity Bean transaction

Hi I've got a problem concerning transactions:
In both cases I've got a CMP Entity Bean called "Account" with some mothods like
increaseBalance(double amount)
decreaseBalance(double amount)
transferMoney(double amount)
for all methods the TransactionAttribute is "RequiresNew". When calling first decreaseBalance(amount) and afterwords
increaseBalance(amount), bothfrom within transferMoney(amount). When setting entityContext.RollbackOnly()
I would expect this rollback doesn't undo my changes because they are in a different transaction, which has been comitted
when the methods finished, but both are rolled back.
I thought there are no "nested transactions" in J2EE. Isn't this one?
Thanks!
Martin

Ahhhh! Right! If I call "this.increase(balance)" from the AccountBean method "transferMoney", the container has no chance to create a new transaction, so the same transaction as in "transferMoney" is used. I didn't think about that, but of course...
So one should never call a bean method directly even when it is a method of the same instance the thread is currently in.
Thanks a lot!

Question about forum use regarding an error I am receiving

I am looking for an answer to the proper process I should follow when running into issues with Azure Storage. As I don't want to annoy folks with tossing questions into this forum regarding errors I'm running into that are more usage related instead
of technical in scope.
For instance this morning I was attempting to view some details about a particular Storage item and was greeted with the following screen in the Azure Portal.
I was able to accomplish what I needed to (downloading some files out of this particular storage account) within the Manage.WindowsAzure.com site without issue. So this seems to be connected to the portal itself and it's interactions with Storage
(perhaps). I now have access to the above Storage item via the portal site, but for about 15 minutes I continually received the message above. Even after logging out, clearning cache, trying different browsers etc.
So my question(s) are; Are these forums the proper place to be posting information about issues we run into? If not what is the preferred method for reporting items like those above and getting help with remediating them in a timely manner?
I'm happy to put them here, just want to make sure there isn't a better place as I'm new to this.

Hi Darren,
You can post your issue with Azure Storage in here. Just make sure that you do not give out any PII data.
Also, the above portal which you are viewing is still in preview. You may use "manage.windowsazure.com" portal to access your resource.
Regards,
Manu

Question about DME file in payment run (transaction F110)

Hi expert,
I have made a payment run in transaction F110.
The payment was made and the bank file (DME file) was created. We are using DME format /BE_BEPDTA.
The bank number in the file is the bank account number from transaction FBZP (table V_T012K, field BANKN).
However, we would like to use the "alternative account number "in the DME file. This is table T012K, field BNKN2.
How can this field be used in the DME file for a specific bank ?
Thank you for your support.
Kind regards,
Linda

Hello,
Copy /BE_BEPDTA in DMEE transaction code to ZBE_BEPDTA and modify according to your needs.
Then use this format in FBZP settings. (payment method in country)
Regards,
Ravi

Qosmio G40-10Z: Question about energy use in sleepmode

When I turn my new Qosmio G40-10Z in sleeping mode, with full battery (and off the AC power), I can't start the computer next day. I can only start it up after connecting it to AC power. I get a message windows Vista wasn't closed properly and I am asked to start in normal way or safe mode.
After starting the battery indicates only 2% power. So, what is using power in sleeping mode? Why isn't the sleep mode not transferred to hibernation state when the battery is almost empty?
(New notebook, only vista and office installed and only television antenna is connected)

Hello guys
At first I just want to write a little bit about theory. Microsoft has implemented standby/Hibernation mode to offer PC users comfortable OS usage and make switch ON/OFF time much shorter.
According to the definition standby mode should be used for short time (launch, meeting and if you must leave the notebook for few hours). Hibernation mode should be used if you leave the notebook over the night or maybe day or two. In standby mode all data will be written in RAM and to keep them notebook needs power. In Hibernation mode all data will be saved on to HDD and notebook can be switched OFF. In hibernation mode the notebook does not need permanent power supply.
For me it is really strange that you use standby mode with battery and almost 20 hours. With this I do not want to say that described battery issue is normal but for 20 hours it is logic to use hibernation mode.
Back to battery issue: only 20 hours under standby mode is really to short. I have tested it with my Tecra and after 5 days I was able to switch ON notebook as usual (only battery power supply.
In your case I see only two explanations:
1. Somehow notebook can not switch into standby mode properly and stays running (I do not believe this because you can see if something like this happen)
2. The battery is defective
What you should do is to contact Authorized service partner in your country. Make a call and explain the situation. Maybe you will get new battery or they should test it using your battery.
Sorry for this long posting. I wish you luck and hope you will clarify this issue very soon.
Bye and good luck!

Question about Parallels using Bootcamp partition

I was about to install XP on bootcamp but i would mainly be using parallels to run XP from the bootcamp partition. What i was wondering is that if i was to make any changes to xp like install a software and create a new folder through parallels, would it reflect on the actual bootcamp partition when i load into the actual XP partition using bootcamp? Basically, do the changes made to windows using parallels carry over to the bootcamp partition given you are using the bootcamp partition on parallels?
Thanks

Thanks a lot. While i am at it, if i use the bootcamp partition with Parallels, i cannot suspend the VM right?
Parallels will behave the same, whether it has its own copy of Windows, or is using that on the Boot Camp partition.
The only difference is backup. If you use Parallels with Windows in a disk image file (Preferably a sparse bundle), Windows can be backed up with Time Machine. If Windows is on its own partition, Time Machine can't handle it.

Questions about Military use

Hey all, my wife is going on her second deployment to Kosovo and this time we were told they have WIFI in their rooms! Awesome! So through the wonders of ebay I bought us both iSight cams for our macs. They work great with iChat.
I was wondering if there are any issues we should look for? Or maybe a different messenger service we should have as a back up?
Anyone have any experience with this?
Thanks in advance!
-Stephen

Hi,
Like CodLBi has said it is going to be about Firewalls or at least which ports the LAN has open and the Connection speed and the Bandwidth share that are going to effect this the most. (Not to mention any "Security" concerns about apps that can send files and Pics)
If it is the Miltary that control the LAN and Internet link then they might move on the ports (they have in the Gulf).
As to Bandwidth that will depend on how many other people are using the LAN At them same time and what they are doing on-line.
I presume it is not the Mac Pro she is taking
That could run Windows XP with Boot Camp or Paralleles and would be one way round as AIM on a PC moves it's ports around and that may have provided a solution.
See the links 5-9 on this section of my page 5.
10:56 AM Friday; June 29, 2007

Can someone answer a question about copyright using itunes?

I'd like to make a presentation using music I purchased from itunes. The presentation will be played at a middle school. The presentation will NOT be sold. Am I breaking Apple copyright by doing this?

The terms of sale for the iTunes Store state that you agree to use the music for "personal use only". Whether or not using music in a presentation for a class would be considered "personal use" could be considered a grey area. I'm not an attorney and I cannot speak for Apple, but as long as this presentation is to be given only once and you don't plan to give copies of the presentation away, post it on a web site, or otherwise make it available to others in any way, I doubt that anyone would give you any trouble over the matter. That is just my personal opinion, though; consult your school for their official stance on the issue.''
By the way, this would not be a copyright issue as far as Apple themselves are concerned; Apple does not hold the copyrights to any of their material. The copyrights are held by the record companies, and would be a separate issue. Use of a music track in a presentation for educational purposes, again presuming that the track is not available outside of the class, generally would fall under "fair use" and so be legal. Again, though, talk with your school if you have serious concerns.
Regards.
Message was edited by: Dave Sawyer

Question about planning material

Is it possible in SAP to have MRP use the planning material field in the material master (MPGD-PRGRP) do the following function or if not is there an SAP solution to my issue:
Customer wants to use part ABC in BOM's, and also stock this material in inventory. However, the customer gets this material from another plant in their SAP system via a stock transport order but wants MRP to place the requirement on the supplying plant as part PABC which is the part in the supplying plant. The vision would be for the supplying plant to ship PABC and once it is received a 309 movement type would be done to convert the part back to ABC.
Any thoughts on this?

Hi,
It will be better if you use Special procurement key as 40 in MRP 2 view of the Material PABC in the Receiving Plant. Also Material PABC will be maintained for both the Plants (Supplying & Receiving both)
Then do MRP Run in Receiving Plant for Material PABC, as a result of this it will generate a Stock Transport PR in the Receiving Plant and then proceed with the STO Process and receive material in Receiving Plant. Then do transfer posting using movement type 309.

Some questions about the use of the relay

I connect Relay coil to the AC power source,but the switch always act.Is there any suitable relay for ac power ?
and when I replaced time delay relay in simulation, there was an error. I don't know how to get the right parameter setting ?
please help.
Attachments:
time_delay relay.png ‏5 KB

Hi there,
Thank you for your question. There are two ways to do this, for your origianl circuit you can connect the time delay relay in this way:
Set the frequency of the source to 1Hz and simulate, then you can see the NC and NO switch back and forth.
Second method: Instead of using a AC relay, we can use an AC coil which can be found at Electro_Mechanical-->COILS_RELAYS-->ENERGIZING_COIL_AC
In addition, we can add a normally closed (NC) contact or a normally open(NO) contact spicified for this AC coil(say K1)
Just type RELAY_CONTACT_NC or RELAY_CONTACT_NO to place the components and then place them under K1.
Change the Controlling device reference as shown in the picture below,
Now the AC relay can be constructed in this way.
For time delay, we can use TIME_DELAY_NC and TIME_DELAY_NO contact
Hope these two methods help!:-)
Best,
Chen_T
National Instruments

Question about design - use patch-panels or switches in racks?

I'm trying to suggest should I use patch-panels in server 19" racks and use stand-alone telecomm racks for access layer switches
OR
should I install 2-3 access layer switches in every server rack?
First version looks more correct, but than I have to use MUCH MORE cables, organizers etc - all of it eats place in data-center.
Maybe someone saw some guides for that question?
Thanks!

2 or 3 access layer switches in every server rack? Considering typical stand-alone rack switches offer 24 or 48 ports, how many servers per rack or how big are these racks?! Or, were your intended access layer switches only 4 port switches?! (laugh)
The main disadvantage of rack switches, you either run out of ports or have too many ports. Since server hosts often push bandwidth harder than user hosts, you also have the issue of how much aggregate bandwidth you need to move out of an individual rack. These issues are better addressed by your suggestion of using patch panels from each rack that come to a network switch rack.
You're correct, all the cables, and their organization, has an expense, but this has to be considered against switch costs. Assuming you intend to use Enterprise switches that offer gig to the servers and perhaps 10 gig uplinks, there's a cost to having extra swiches by deploying to each rack. Also switches per rack would disallow the advantages you might find with a chassis switch in a switch rack. Further, depending on performance to provide, do you want to be limited by uplink bandwidth from each rack, or pay for high bandwidth from each rack that's usually underutilized.
Besides "looking right", the foregoing is often why there are server rack patch panels, etc.
One design, that I found interesting, was using the 3750 "stacked" across racks (guess you could do same with newer 2975s).

Question about planning using serialization point in transaction S2L

Similar Messages

Maybe you are looking for