Question about R7500 ( Gaming Related )

So I have had this router for a couple of days and have had really no issues with it at all, just one thing about the the QOS that kinda bugs me but...

I just got this router yesterday and I wanted to know if there is any other 3rd party FW that I could flash it with?
I seen a thread about Myopen...

Similar Messages

HT5312 a question about the security-related emails

Excuse me.ive forgot my security questions and answers.and what was worse my yahoo e-mail(which is the security-related emails ) has been closed few days ago.could u help me?

The Three Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

A Question about Z97A Gaming 9 ACK

Hello there guys.
I'm upgrading my PC and I would like a good Z97 Chipset motherboard.
I've found that the "Z97A Gaming 9 ACK" Would be a good one, I've found the specs to suit me.
But the problem is. I can't find it!!!
Like anywhere! It's out of stock from websites like NewEgg. and not even on Amazon!.
No one reviewed it before and not even a video about it on YouTube!.
Despite it's good specs and from a well known company!
You only can find it on not very well known website and with low In-Stock numbers.
Is it like... RARE?! or did MSI Get it out of the market maybe because the Few problems that people had?
Should I buy it or consider getting the Gaming 7 at a lower price?
I need an advice.
Thanks guys!

Quote from: Nichrome on 15-June-15, 22:40:35
Where do you live? Country
Quote from: badboy2k on 16-June-15, 04:56:28
looks like he is in Saudi Arabia if i'm reading it right for his area location where he comes from!
Just like "badboy2k" said I live in Saudi Arabia.
But im definitely sure that I'll not find it over here you know
But i've found one in one of the biggest dedicated PC components websites located in Saudi Arabia.
Softland: http://goo.gl/KJrKwi (English Website)
You need to register to reveal the price. I registered and now it says please contact us for the price.
Im going to contact them and ask them about the Gaming 7 and the Gaming 9 ACK Prices and compare them.
But if you have any other trusted websites out there like in the US or the UK, Feel free to tell me.
Thank you guys again and sorry for my bad English.

A simple question about Drag and Relate navigation

Dear experts
I have found SAP help or related manuals only good at talking difficult things such as how to customise the drag and relate targets, etc. However, after I followed exactly and then how to test.
Then I just see pieces of information, very unstructured. Spending me a whole day, even I can't get a good simple example on how to really perform a drag and relate at least for the proof of concept at EP 6.0. It spent a lot of time in describing what the navgiation panels about, what drag and relate targets. Then how to do it in once transversal. That is, with all customisation, how to drag and relate an object.
My step is with iview A, shows a purchase order details showing a drag and relate enabled object like vendor no.
Then I try to drag this vendor no. to a display vendor iview, iview B.
I have known I have to put iview A and iview B to a Drag-and-relate targets. I am sure I have done this. Does it mean opening the portal, I will see both iview A and iview B appearing at the same time in the drag-and-relate target area? However, in my case, it is not, iview A only appears in that area when I load it once, same to view B. When I load iview B, iview A links from D&R target will be wiped off. Then how I can drag an item from iview A to B while each one of them can only appear at any time.
Can anyone give me a simple guide (don't give me an internet link from help.com) I have been tired of this.
First, I would to make sure if my so called self-learnt drag-and-relate simple action is correct in the steps or really I have made something wrong in the customisation or even a bug there.
Can anyone on the planet have this experience, pls. act as my teacher in this area?
Rgds
Stephen

Thanks
I have tried the 1st way already. But I can see both iviews existing in the D & R targets. Now I try to drag an item with business object BUS2002 from iview A to relate to LFA1 of iview B of the same back end system.
But iview B shown up with that data of LFA1 shown up (in my case the vendor no.)
I have used autocomplete relationship and I have checked it has been well-defined already. Also check from metadata at backend they are both active.
Do you have any clues to the pitfall in my case?
Rgds

Question about n:1 relation

Hi,
I have a question. If I have two persistence classes (say A and B)with n:1
relation. The B class has a collection that should contain all the
instances of A class that reference the B class instance. The question is:
If I create the instance of B class and then create n classes of the A
class, do I have to explicitly set the created collection of those n
classes to the instance of B or the creation of those n classes
referencing B and making them persistent is enough, i.e. that relation is
bidirectional automatically ?
(Forgive me if I missed something in this issue.)
Regards,
Anton

Hello Anton,
The way your instances refers to one another is purely a Java issue, while
the way it is made persistent is a JDO issue.
As a Java developper, you have to set-up the associations between you A
and B instances. This is implementation details. You may use existing
classes which helps you manage such an bi-directionnal association.
As soon as your java objects refers to one another, if class A and B are
persistent capable, you just have to make the B instance persistent, so
that, all A instances it refers to, will be persistent too. This is called
persistence by reachability.
Hope this clears any doubt.
Cheers,
Patrick Guillot
Versant France S.A.
Anton Kommar wrote:
Hi,
I have a question. If I have two persistence classes (say A and B)with n:1
relation. The B class has a collection that should contain all the
instances of A class that reference the B class instance. The question is:
If I create the instance of B class and then create n classes of the A
class, do I have to explicitly set the created collection of those n
classes to the instance of B or the creation of those n classes
referencing B and making them persistent is enough, i.e. that relation is
bidirectional automatically ?
(Forgive me if I missed something in this issue.)
Regards,
Anton

Question about Series, Gaming X, GDXX, HXX ? Which is better?

I have been seen lots of acronyms that I don't know what it mean to be.
What make me decide for z97 GD65 Gaming instead z97 Gaming 7 was the price, the GD65 was more expensive so I thought if is more expensive, is better!
The questions is: What's means GD? H? or just gaming séries? have difference between these acronyms? What GD/H means exactly?
The z97 GD65 have a mSata and gaming 7 have m.2 Port and I still don't understand why z97 gd65 gaming is more expensive.
Can you guys clear my mind?

There are slight differences, and the price difference (here in the US anyway....) is only $10 depending on where you get those 2 boards.
The GD65 has VGA and DVI video outputs for the CPU video.
The Gaming 7 has HDMI and Display Port outputs for the CPU video.
The GD65 has mSATA while the Gaming 7 has M.2.
The GD65 has 6 USB ports (4USB 3.0, 2USB 2.0) and the Gaming 7 has 10 (8USB 3.0, 2USB 2.0).
There's minor differences, but they are there.

Question about Parent Child relation at "Define Asset Number" screen

Hi, all
I suppose that while I assign a parent asset to an other asset
"Subinventory" value at the "Location" tab should be disappeared. Namely an asset which is connected to a parent asset
could not be found in a subinventory
The problem: While I assign a parent asset to an other asset Subinventory do not disappear.
could you please help be about this?
Thank you
Ceyhun

Hey JAson,
Have a look at http://iadviseblog.wordpress.com/category/collections/
Please mind that in my example I used an old version of apex,
wwv_flow_collection should be replaced by apex_collections.
Please refer to the user manual
Regards,
Oli

SLI questions about Z97 Gaming 7

Greetings, folks!
I've accidentally tore off the 2nd PCI-E slot on attempting to remove its VGA for maintenance. Don't ask me how! Somehow the VGA lock bracket hadn't worked as usual.
Well, my question is: SLI works from 1st slot to the 3rd slot? I've not found any SLI bridges of that long, because the out-of-the-box bridge is too short. There's any risks on leaving the PCI-E tracks exposed? The board won't power on while they're touching themselves, but is working like a charm, sustaining my 4.6GHz i7 4790K.
Thanks a lot, everybody. Peace.

Should have 120mm long bridge online (I think it's enough?).

Quick question about Z97 Gaming 5 fan headers

How many fans can I daisy-chain in one of the CPU and System fan header?
I'm adding a few corsair sp120s silent edition non-pwm and want to have control of the speed from BIOS.

Quote from: badboy2k on 08-March-15, 01:53:46
how any you can daisy chain is down to mainly how much each fan draws power wise!
the SP120 Quiet editions are fairly low .08A draw fans so you may be able to power upto 2 off one header as long as they are low power draw fans (below .15A per fan)!
thank's for this info

Question about Z87-GD65 Gaming 7.1 HD Audio

Hi, I am interested in the new Z87 GD65 gaming motherboard, it looks cool but I have a question about the 7.1 HD Audio.
Does it only support through S/PDIF output? or, by using the Sound Blaster Cinema suite, it able to simulate virtual 7.1 surround
to my Stereo headset, just like other standalone 7.1 virtual sound cards do?
Sorry for poor English
Thanks in advance.

Quote from: mongkb on 06-June-13, 12:49:25
Does it only support through S/PDIF output?
Yes.
http://www.msi.com/product/mb/Z87-GD65-GAMING.html
Click on Specifications / Detail.
Audio
• Realtek® ALC1150 Codec
- 7.1-Channel High Definition Audio
- Supports S/PDIF output

Question about Tritton AX 720 Dolby Digital Surround Gaming Headset

Hello, I have a question about the AX 720 that I hope someone can answer. I emailed Tritton and I'm not sure they understood what I was asking, so Ill try here. Ok, my question is this, Will I get audio through the headset if my set up is this: My X-BOX 360, my PS3 , and my Direct TV box are all hooked up to my TV via HDMI. My TV has an optical audio output, so if I hook up the AX 720's amp to my TV with the optical cable will I get the audio that is coming from that output into my headset? I'm using the Tritton AX 180's now hooked up almost exactly the same, except instead of the optical out, I'm using the red and white out that is right next to the optical out, and it works perfect. I get full audio from all 3, and the only time I have to change any cables is when I want to chat, but thats rare. I'm looking to upgrade to the 720 because I'm on my 3rd set of broken AX 180's. Ive read several reviews about the 720's and a few of them said that if your TV has an optical output that you can use that, and I hope its true. I hope this question makes sense, and thanks in advance for the help.

@Rockadile: You are totally right about the AX 180's breaking, like I said Im on my 3rd set. Thankfully for the first break it was within the return period, then I made sure to buy the warranty when I got the second. Now that the 3rd has broken in the same exact place Im done with these. The problem is my heads big (wide), and because of this theres extra pressure on the plastic piece that connects to the ear piece. I had to make a custom metal bracket to fix it. What I did was take 2 pieces of flat metal and bent them into the shape and angle of the plastic that attaches the earpiece, then I electrical taped them VERY tight. So basically instead of the plastic getting the stress, the metal does. And it worked great up until now, its breaking just below the adjustable part where the plastic goes into top of the headset. I looked at the AX 720's and it seems like there alot wider and stronger in that area. But if I do get them I will be sure to buy the replacement warranty. Sucks having a big head!

Two basic, related questions about external HDs and trashing/erasing

I have a couple of questions about using an external hard drive that I can't seem to get answered by surfing around. They'll probably seem stupid and basic, but ... Here they are:
1. When you drag a file from your external hard drive to the trash, does that file actually transfer to the main hard drive's trash, and thus the main hard drive? For instance, say I'm deleting a 4 GIG file. Will I temporarily add 4 GIGs to my main drive in the process of deleting it?
2. With a multipartitioned ext. drive, can you erase the contents of a single partition with the disk utility, thus bypassing having to drag-trash everything on that partition?
Thanks.
G5 iMac Mac OS X (10.4.2) Powerbook (10.4.6)

1. No. The files are moved to an invisible .Trash directory on the external volume. No copying of data takes place between volumes when you move stuff to the trash.
2. Yes. You can use Disk Utility to erase or securely erase just a single Volume on a disk, leaving the other volumes unaffected. Simply click on the name of the Volume in the left pane of Disk Utilitly, click on the Erase tab in the right pane, and choose the options you want for erasing the volume.

Questions about Audigy 2 ZS connecti

Hello,
New to these forums, so bear with me. I'm considering purchasing an Audigy 2 ZS gamer card, and have some questions about the card and speaker setup. I've read the FAQ's in the forum, and they have been a big help, but I still have questions related specifically to my setup. Here's the system specs:
AMD Athlon 64 3000+
Asus K8V SE Deluxe
VisionTek Radeon X800 XT PE
Seagate 250 gig SATA HDD
gig Crucial ram
Antec P80 case
Antec TruePower 430 ps
Altec Lansing ADA885 digital speakers (awesome sound)
Altec Lansing headset (cheap but works for voice and gaming)
ADI AD980 onboard sound
Windows XP Home
. I currently am able to run both the speakers and headset at the same time by using the front panel audio outlets on the case (helps with the immersion in IL2 946). I would like to continue doing this(using front panel audio) with the new card. I've found several places that have an adapter cable for sale, http://www.x-tap.com/
http://www.performance-pcs.com/catal...oducts_id=2700
http://ask.americas.creative.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=ww_english_add,U={B8F6030-DA4F-D3-94F4-00500463020E},Company={CEAE26D-879-4C00-AC9F-03BC258F7B70},d=3025443648,VARSET=ws:http://us.creative.com,case=5764
The plug that I have has only 3 separators, not 4. Will this work with the Audigy 2? I don't have a link for this plug, unfortunately.
4. I had been considering purchasing? a set of USB headphones, but I've been told that when you plug them in, the sound is cut off for the speakers. If there was a workaround for this, I might consider getting them. Then I wouldn't have to use the front panel audio or the connections on the card.
5. I've heard of an issue with this particular set of speakers and the Audigy 2 card, particularly that the speakers were originally designed for a Dell system, and the wiring was phased differently than in other systems. Is this something to be concerned with, and if so, is there a workaround?
I like to research a particular product before I buy it, in order to make an informed decision and avoid problems if possible. Sometimes it works, sometimes it don't
Thanks in advance for the help.
Message Edited by mrj_455 on 03-05-2008 05:28 PMMessage Edited by mrj_455 on 03-05-2008 05:32 PM

The inputs are easy to find and select:?
Right-click the Mixer icon on the taskbar and select "Playback Devices".<
There should open a new Window with the options of "Speakers" and "SPDIF"<
With Speakers highlighted click the?"Properties" button on the lower?right corner<
Go to the 4th tab (I believe it is "volume" in english, "Pegel" in german)<
There you have your inputs!<
Unmute Line-In and set its volume according to your desires.<
Also remember that software designed for XP, that should control the Line-IN settings, (ie. Hauppauge WinTV or Dscaler) will be unable to do so in Vista, do to the architecture change. You can however enable "Compatibility Mode for Windows XP SP2" for these applications (right-click on their executable) and restore control of the inputs directly from the program. (You should however unmute it first as explained above). PS:? All Creative Software that came on the CD is incompatible to Vista. Only the included Audio Console should work as expected.Message Edited by alexs3d2 on 05-07-200707:3 PM

Just installed iOS6, questions about "iMessage" and other things...

I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Some questions about configuration in MAX.

Hello,everyone!
I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
My question as following:
1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
If I select stepper,though motor can work but I can't test encoder in MAX.
2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
My English is poor,Pls pardon me!I come from China.
Thank you for your help!
EnquanLi
Striving is without limit!

Hi,Jochen,
Thank you for your kindly help!
The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
1,Motor can't run.
2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
Except for the two points mentioned above,"Following Error" is occured frequently,I don't know why.
I am still not clear why I must set the motor type be stepper in MAX .
And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
I am verry sorry I have too many questions!
I am very appreciate for your kingly help!Thanks again!
EnquanLi
China
Striving is without limit!

Question about R7500 ( Gaming Related )

Similar Messages

Maybe you are looking for