Question About Receiving Calls

I thought I posted this today, but I can't find it. Why is it that when I receive a call, that as soon as I hang up the phone goes to my phone favorites?? Why does it do that? Why will it not go to my home screen where it was? I am missing a setting somewhere?
Thanks,
Joe

Not with my phone.
1. Open Safari. While using Safari, call your phone from another line and answer the call. End the call, and the screen goes back to Safari.
2. Open Phone app, select the dial pad, close Phone app with the home button and lock your phone. Call your phone from another line, answer it and end the call. The phone then relocks. Unlock the phone and it will open to the dial pad screen.
If your phone doesn't do this, do the usual troubleshooting steps as needed:
1. Reset the phone - press both home and sleep/wake buttons until the Apple logo appears.
2. Restore in iTunes from a backup
3. Restore as a new iPhone.

Similar Messages

Question about receiving mesage from those not on ...

I have a question about recieving message from those who are not on my contacts
I enable anyone to contact me through IM and call. a friend who I did not yet add as a friend (not in contact)call me by mistake. he sent message of apology to me, say "sorry for mistakeing call,"
but, i did not recieve such mesage, even thoughh i got notification of call, why did not i recieve his mesage if i Can receive IM from anyone not on contact list??
i try to send him mesage to test. He also did not see my mesage show up ,, on his screen it only show that he call by mistake and that he sent mesage ((which, i never recieve).
i try this on some of my friend's friend who has enable all call and IM through, they also did not recieving mesage I sent them however can see notification of call i make.
does this mean, Only you can see mesage of those in contact list even though you recieve from any body? am i misunderstand How skype is working? Please enligthen me, thx...
thx for info.....

I'm not sure I understand you entirely, but you could put the CDs on the computer with a CD ROM drive and then boot that computer as a firewire drive to the computer without a CD ROM drive and then copy your music over.

About receiving call

Hi Friends, I purchased Nokia E63 last month. but now I have some problems. first, Whenever I receive call I does not do it. when I press Green Button, I can't receive the call. somes it gets restarted or I disconnect the call next time I receive the call. I face this problem daily. how I Solve this problem.
Second , I want to know that is it possible to mute the camera sound

try not to double post the same issue please
This sound cannot be turned off as it is a legal requirement in some countries. It is so that you cannot be photographed without you your knowledge.
there is software availble to disable it have a look here
http://dailymobile.se/forum/index.php/topic,2241.0.html
for the call button
you can try a reset on the phone back up data first if this fails its a hardwear issue and will need to go to a nokia care point
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Question about receiving International calls

I was waiting for a call from Europe (I am in the U.S.A.) and the caller states it rang busy. He tried twice to call my Skype number before reaching me on my cell phone. I know the phone wasn't busy because I could call it from my American cell phone number.
Do I need to enable or subscribe to international calls to receive them? I have an "Unlimited US & Canada" subscription.
Thanks.
Solved!
Go to Solution.

I'm sorry for such a thoughtless question. My privacy settings were blocking this incoming call.

Some question about receiving messages from Skype ...

Hello there,
I have a question or two about recieving messages from Skype users, who are not on my contact list"
1. If I have enabled to only receive messages from people in my contact list, will they be notified when they try to send me an instant message, that they need to add me first?
2. Will I still be able to see messages sent by contacts who are not in my contact list and them see my messages*, if we are both in a Skype conversation group but not on each other's contact list? *The messages either one of us posts in the Skype group conversation
I appreciate the information
Thanks
Solved!
Go to Solution.

1. The person sending this message will not receive any notification about failing message delivery. The message will just disappear in nowhere.
2. Messages exchanged in group chats will be seen both by you and the other person, even if this person is not in your Contact List.

Question about Receiver Determination step in BPM

Hello all,
I have a BPM process similar to Multicat BPM Pattern.
I have some questions regarding how the Receiver Determination works:
1. Does it have to have interface determination in the Integration Directory?
2. Does that interface determination (including the mapping) takes place when sending a message to a receiver from that Receiver Determination step,
or should I perform a Mapping step explicitly in the process?
Thanks ahead,
Yoav.

Yoav,
Am not sure if I understood your requirement compltely.
Case A:If you are using a send step without a Transformation Step.
Then Send will have message A being sent out from BPm and then , during Interface Determiantion this will be transformed into Message B by Mapping in Interface Determination and this message B will be received by receiver
Case B:If you have a transform and then a Send
In this case, the mapping has been done, so you have the message B with you and so, them message sent from the BPM will be message BHope this clarifies,
Regards,
Bhavesh
Message was edited by: Bhavesh Kantilal

Another question about receiver determination

Hi friends
Can we add a new receiver to the list of receivers in the receiver determination , based in some condition only for this new receiver.
Let us say we have the message 1 sent to receiver_1 and receiver_2 no matter what , but the message 1 should only be sent to receiver_3 according to some conditions.
my question if I can only put condition for the receiver_3 receiver determination , or do i have to write a UDF for mapping of the receiveres.
Thanks

Can we add a new receiver to the list of receivers in the receiver determination , based in some condition only for this new receiver.
yes you can add list of the receivers in the receiver determination , based on some condition .
my question if I can only put condition for the receiver_3 receiver determination , or do i have to write a UDF for mapping of the receiveres.
dont need to write any UDF's . u have to use Context Object/X-Path for REC3 in rec.det
for ex: field1 = 1000 -> rec3
field1 =900 ->rec1
Edited by: bhavanisankar.solasu on Feb 10, 2012 3:48 PM

Question about method calling (Java 1.5.0_05)

Imagine for example the javax.swing.border.Border hierarchy.
I'm writing a BorderEditor for some gui builder, so I need a function that takes a Border instance and returns the Java code. Here is my first try:
1 protected String getJavaInitializationString() {
2     Border border = (Border)getValue();
3     if (border == null)
4         return "null";
5
6     return getCode(border);
7 }
8
9 private String getCode(BevelBorder border) {...}
10 private String getCode(EmptyBorder border) {...}
11 private String getCode(EtchedBorder border) {...}
12 private String getCode(LineBorder border) {...}
13
14 private String getCode(Border border) {
15     throw new IllegalArgumentException("Unknown border class " + border.getClass());
16 }This piece of code fails. Because no matter of what class is border in line 6, this call always ends in String getCode(Border border).
So I replaced line 6 with:
6     return getCode(border.getClass().cast(border));But with the same result. So, I try with the asSubClass() method:
6     return getCode(Border.class.asSubClass(border.getClass()).cast(border));And the same result again! Then i try putting a concrete instance of some border, say BevelBorder:
6     return getCode(BevelBorder.class.cast(border));Guess what! It worked! But this is like:
6     return getCode((BevelBorder)border);And I don't want that! I want dynamic cast and correct method calling.
After all tests, I give up and put the old trusty and nasty if..else if... else chain.
Too bad! I'm doing some thing wrong?
Thank in advance
Quique.-
PS: Sorry about my english! it's not very good! Escribo mejor en espa�ol!

Hi, your spanish is quite good!
getCode(...) returns the Java code for the given border.
So getCode(BevelBorder border) returns a Java string that is something like this "new BevelBorder()".
I want Java to resolve the method to call.
For example: A1, A2 and A3, extends A.
public void m(A1 a) {...}
public void m(A2 a) {...}
public void m(A3 a) {...}
public void m(A a) {...}
public void p() {
    A a = (A)getValue();
    // At this point 'a' could be instance of A1, A2 or A3.
    m(a); // I want this method call, to call the right method.
}This did not work. So, i've used instead of m(a):
    m(a.getClass().cast(a));Didn't work either. Then:
    m(A.class.asSubClass(a.getClass()).cast(a));No luck! But:
    m(A1.class.cast(a)); // idem m((A1)a);Woks for A1!
I don't know why m(A1.class.cast(a)) works and m(a.getClass().cast(a)) doesn't!
thanks for replying!
Quique

Questions about Video calling - Subscription?

whenever i try calling my friends it says, "problem with playback device" why is that? and how can i fix it?

In Skype open Tools -> Options -> Audio settings. What device is sellected there as your Speakers? Is there more than one option available in the selection box?

Question About CVP Call Server Logs

Hi Members,
In the CallServer Logs i could see a [SIP_LEG_PRERTE_CORRID] - Publishing ,, [ICM_REQUEST_INSTRUCTION]
Could someone tellme what is the difference between [SIP_LEG] and [SIP_LEG_PRERTE_CORRID]
In what are all the scenarios i would get [SIP_LEG_PRERTE_CORRID] this leg
Regards,
Senthil

Hi Kris,
Thanks For your reply. Here is my Scenario.
PSTN---->VoiceGateway---->CUSP---->CVP CallServer----->ICM---->Script(Just to Play Music).
Here in ICM i have a Dialed Number configured and Mapped to a Calltype and Calltype is Associated in the Script where i have a IF Node (condition Match the Dialed Number).
We have lot of TFN's configured and everything is working fine without any issue.
Now i have to add new DID's in my Setup. When i test the Call it is not hitting my START NODE on the Script itself.
I have attached my ICM Router Logs here. Please let me know if you have any suggestion.
ICM Router Logs for the Dialog ID : 515149
07:21:29 rb-rtr Trace: Dialog (515149) has a correlation id (7 7) that is unknown.
07:21:29 rb-rtr Trace: For message (14) from routing client iyogi_CVP_PG_RC2 (ID 5003) could not find dialog id (7).
07:21:29 rb-rtr Trace: Router sending dialog fail reason (11) for dialog (515149).
CVP Call Server Logs for the Dialog ID : 515149
137620197: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %_Message-6-com.dynamicsoft.DsLibs.DsUALibs.DsSipObject.Message: In DsMimeEntity.parseBody() - Content type application/x-q931 is unregistered.
137620198: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %_Message-6-com.dynamicsoft.DsLibs.DsUALibs.DsSipObject.Message: In DsMimeEntity.parseBody() - Content type application/gtd is unregistered.
14036239: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %CVP_8_0_ICM-7-CALL: {Thrd=pool-1-thread-50-ICM-6090032} CALLGUID = 31D4D479100001305602249B0A6E0A12, DLGID = -1 [null] - Processing ,, [MsgBus:NEW_CALL],   ssId=SYS_SIP2,   mediaType=,   location=,   locationpkid=,   locationsiteid=,   srcaddr=10.100.0.9,   pstntrunkgroupid=10.100.0.9 ,   pstntrunkgroupchannelnum=2147483647,   sipheader=,   rckey=,   rcday=,   rcseq=,   uui=,   CallContext:,     user.media.id: 31D4D479100001305602249B0A6E0A12,, LEGID = null, DNIS = -1, ANI = -1
14036240: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %CVP_8_0_ICM-7-CALL: {Thrd=pool-1-thread-50-ICM-6090032} CALLGUID = 31D4D479100001305602249B0A6E0A12 - Correlation ID routed call
14036241: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %CVP_8_0_ICM-7-CALL: {Thrd=pool-1-thread-50-ICM-6090032} CALLGUID = 31D4D479100001305602249B0A6E0A12, DLGID = 515149 [SIP_LEG_PRERTE_CORRID] - Publishing ,, [ICM_REQUEST_INSTRUCTION],   dialogueId=515149,   sendSeqNo=1,   trunkGroupId=200,   trunkNumber=1,   serviceId=2,   uui=,   correlationId=7,   location=,   locationpkid=,   pstntrunkgroupid=10.100.0.9 ,   pstntrunkgroupchannelnum=2147483647,   sipheader=,, LEGID = 6B6C5D0A-87A311E0-8FF3C7B6-824C2EAB, DNIS = 35315260067, ANI = 18664281713
14036242: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %CVP_8_0_ICM-7-CALL: {Thrd=pool-1-thread-138-ICM-6090033} CALLGUID = 31D4D479100001305602249B0A6E0A12, DLGID = 515149 [SIP_LEG_PRERTE_CORRID] - Processing ,, [ICM_DIALOGUE_FAILURE_EVENT],   dialogueId=515149,   sendSeqNo=1,   errorCode = E_UNSPECIFIED_FAILURE,, LEGID = 6B6C5D0A-87A311E0-8FF3C7B6-824C2EAB, DNIS = 35315260067, ANI = 18664281713
14036243: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %CVP_8_0_ICM-7-CALL: {Thrd=pool-1-thread-138-ICM-6090033} CALLGUID = 31D4D479100001305602249B0A6E0A12, DLGID = 515149 [SIP_LEG_PRERTE_CORRID] - Publishing ,, [MsgBus:DIALOGUE_FAILURE],   ssId=SYS_SIP2,   errorCode=E_UNSPECIFIED_FAILURE,, LEGID = 6B6C5D0A-87A311E0-8FF3C7B6-824C2EAB, DNIS = 35315260067, ANI = 18664281713
12185266: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %CVP_8_0_SIP-3-SIP_CALL_ERROR: CALLGUID = 31D4D479100001305602249B0A6E0A12 LEGID = 6B6C5D0A-87A311E0-8FF3C7B6-824C2EAB - [INBOUND] - DIALOGUE_FAILURE from ICM Router sends 404 rejection to call. errorcode=15 [id:5004]
12185267: 10.110.10.18: May 27 2011 07:21:29.593 -0700: %CVP_8_0_SIP-3-SIP_CALL_ERROR: CALLGUID = 31D4D479100001305602249B0A6E0A12 LEGID = 6B6C5D0A-87A311E0-8FF3C7B6-824C2EAB - [INBOUND] - ABNORMALLY ENDING - SIP code [404], Reason Hdr [SIP;cause=404] Not Found, GW call using SURV TCL flag [false], NON NORMAL flag [true], USE ERROR REFER flag [true] with AGE (msecs) 0 and Call History : [id:5004]
Regards,
Senthil

A Question about Delphi Call stored procedure??

Hi! I use Delphi to develop a 3-tied application.and i write a stored procedure to insert data.If I use BDE to derectly to invoke this stored procedure ,it can insert data in proper. But in 3-tied Application, when I invoke the stored procedure though application server(middle-tied),Application Raise Error."ORA-06502:PL/SQL:numeric or value error:Character string buffer too small ora-06512:at "sfis1.insert_cpk_record" line 92,ora-06502:PL/SQL: numeric or value error:Character string buffer too small ora-06512 at line 1" .Please help me.It's urgent.

It's impossible to say without seeing the source of the procedure, but on line 92, there is an assignment made to a string variable that is sized too small for the value.
Something like:
is
v_variable varchar2(2);
begin
v_variable := 'ABC';
end;Is it possible that the middle tier is passing in a parameter value that is longer than you expect? We could comment further if you can post the PL/SQL code.
You might also throw in some debugging code to compare the parameter values between the BDE and middle tier calls.

Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
Heather

In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off.

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off. never had this trouble with my 3...I don't even want to talk to anyone on this phone! Is the sensor bad? That is what the AT&t rep suggested.

Restore as new... if the problem still continues then there is a hardware issue.
If it stops after a restore as new, then the issue is with the backup the device is currently setup with.

IPhone screen is dark. I can receive calls but can't make them because I can't see the numbers on the screen. Is there anything I can do about that?d

My phone got damp. It wouldn't work for about a week. Now the screen is completely dark, altho I can receive calls. I just can't make a call because I can't see the numbers. Anything I can do about that? Is this a simple repair?

Yup, it sounds like your iPhone needs to be sent in for service.

Question - I cannot make or receive calls need help !

I have an Iphone 5... I cannot make calls or receive calls. I reset network settings and I have reset the SIMS card and I am still having the same problem. My husband is on the same cell service as I am and he is not having any problems.
When I try to make a call - it goes directly to call ended - when people try to call me it goes directly to my voice mail. on the left hand side at the top all it says is seraching - my wifi is connected... i also keep getting NO Service..
Can anyone help?
Thanks

As do my wife and I... just because one is working does not mean that there is not a problem on the carrier side with the other one.
Start by contacting your carrier.

Question About Receiving Calls

Similar Messages

Maybe you are looking for