Question about receiving mesage from those not on ...

I have a question about recieving message from those who are not on my contacts
I enable anyone to contact me through IM and call. a friend who I did not yet add as a friend (not in contact)call me by mistake. he sent message of apology to me, say "sorry for mistakeing call,"
but, i did not recieve such mesage, even thoughh i got notification of call, why did not i recieve his mesage if i Can receive IM from anyone not on contact list??
i try to send him mesage to test. He also did not see my mesage show up ,, on his screen it only show that he call by mistake and that he sent mesage ((which, i never recieve).
i try this on some of my friend's friend who has enable all call and IM through, they also did not recieving mesage I sent them however can see notification of call i make.
does this mean, Only you can see mesage of those in contact list even though you recieve from any body? am i misunderstand How skype is working? Please enligthen me, thx...
thx for info.....

I'm not sure I understand you entirely, but you could put the CDs on the computer with a CD ROM drive and then boot that computer as a firewire drive to the computer without a CD ROM drive and then copy your music over.

Similar Messages

Some question about receiving messages from Skype ...

Hello there,
I have a question or two about recieving messages from Skype users, who are not on my contact list"
1. If I have enabled to only receive messages from people in my contact list, will they be notified when they try to send me an instant message, that they need to add me first?
2. Will I still be able to see messages sent by contacts who are not in my contact list and them see my messages*, if we are both in a Skype conversation group but not on each other's contact list? *The messages either one of us posts in the Skype group conversation
I appreciate the information
Thanks
Solved!
Go to Solution.

1. The person sending this message will not receive any notification about failing message delivery. The message will just disappear in nowhere.
2. Messages exchanged in group chats will be seen both by you and the other person, even if this person is not in your Contact List.

Question about adding tracks from computer not your own

Hi, Before I ask my question I'll just describe the situation. I have a primary computer which is archaic in that it does not have a cd rom drive. Therefore, I have to download mp3's to put them on my playlist because I can't access them through cd. Now, my sister has a computer with a cd-rom drive and an itunes too. However, when I connect to her computer, itunes does not recognize my playlist and pretty much says that I have to erase my playlist in order to create a new one. So, I have to sacrifice the tracks I have in order to upload my cds in my ipod. Now the question which you all probably have guessed: What can I do so that this does not happen? I'd like to put some of my cd's on my ipod because I do like particular albums that is not necessarily available to download. Anyone who can help in bringing light to the situation would be great.
Windows ME

I'm not sure I understand you entirely, but you could put the CDs on the computer with a CD ROM drive and then boot that computer as a firewire drive to the computer without a CD ROM drive and then copy your music over.

Question about tranferring data from iPhone 3gs to iPhone 4

I just had a couple quick questions about transferring data from my old phone from my new iPhone 4. The reason i am wondering is because i am worried about whether i will encounter any problems when doing so.
First off i have already sold my phone today, i reset all data and settings from the phone and gave it to my buddy so its gone. I did a full sync and backup yesterday so all the necessary files should be on my computer(windows 7). Now, im basically wondering if i will run into any problems if i restore my iphone 4 from a backup. My 3gs was running 3.1.2 on att. Now i know IDEALLY i would have updated it to iOS 4 before backing it up and used the newest version of itunes, but i did not. Does anyone think this will be a problem for me?
Now with that out of the way, my biggest fear is losing my old data(text messages and notes mainly because i am a pack rat for those type of things) so id like to be SURE that none of my old backups will be deleted in any scenario. The reason i dont just restore it right now is because i want my new phone to be as clutter free as possible. I am going to be putting on here only the apps that i used often and would basically like to transfer over the BARE minimum; texts, notes, and highly used apps... So i guess my main question is can you transfer over only certain things like texts and notes after setting up the phone as a new phone. And if i were to set up the phone as a new phone what would happen to my old backups? Would i be able to selectively restore?
Im afraid that it might not be a possibility to transfer only certain things even though it should be.. i should be able to select a text messages folder and put it on my new phone and be done with it... But anyway i dont want to rant. Can anyone explain to me how this all will work?
ULTIMATE GOAL: Transfer only texts, notes, certain apps(and their data) and NOTHING ELSE.
MOST IMPORTANT THING: Not losing texts and notes. I can deal with putting all the old **** on my new phone and cluttering/slowing it down if i NEED to.
Thank you in advance, sorry for the long post.

If the most important thing for you is keeping old text messages, notes, and voicemail, then you'll need to sync the phone from your existing backup. I know of no other way to access those items.
Once you have synced to the new phone, check that you have those items that were important. Then you can reconnect your phone to iTunes, and change the sync settings to remove the apps or other items you no longer want to keep on the phone.
iPhone backups are stored by iTunes; you can see them by opening your iTunes preferences, clicking on "Devices" and then looking in the window. You can delete old backups from here. I don't know how you can open/read the backups though.
I don't expect you'd have any problems syncing from your old phone's backup, but it's definitely an either/or situation. Since you got rid of the old phone already, it's too late to email yourself your notes, or copy the text messages. Your previous backup is your only solution.

Hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

Hi,
How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
Get-MailboxFolderPermission -Identity
CEO’s email address:\Calendar -User assistant’s email address
Also check with:
Get-Mailbox -Identity CEO’s mailbox
| fl *GrantSendOnBehalfTo
Please let me know the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Question about Offset printing from Indesign

Hello everyone, I have a question about printing too a DPX rip platemaker from Indesign. When I print my file to the rip, it seems to bold the text when it should not be bold, I do not know if this is an Indesign or rip error, but if anyone has a solution I would be grateful for any assistance.
I dont know if it's necessary, but the OS with Indesign is Mac OSX, printing to a ripmate on Windows 2000.

Have you applied an outline to the text?
Try unoutlined text
Is the text near an effect like drop shadow or other filter?
Move the text to top layer or above any effects.
Is it just this file or any file?
Need to figure out if it's just this job or all of them or at least let us know.
Have you got the fonts installed at the RIP end, perhaps it's rasterising text that the RIP has not got the font?
You could try exporting to PDF first, that would embed the fonts in the PDF.
Let us know if any of this helps?

Another one question about how to download applet (not using external tool)

Hi
i write tool for downloading applet on card. I use apdu trace from NXP eclipse plugin as source of information and i read also about cap-file format in Java Card Virtual Machine specification. And i have questions about data transferred by LOAD command.
As example - from apdu trace i see that transferred data are "C4820E33 DATA1 DATA2". Full length of transferred data is 0x2EE2.
C4 - OK, this is "Load File Data Block" tag as specified in Global Platform
820E33 - OK, this length of tag, =0x0E33
DATA1 - sequence of cap-file components: Header.cap, Directory.cap, Import.cap, Applet.cap, Class.cap, Method.cap, StaticField.cap, ConstantPool.cap, RefLocation.cap. Length of DATA1 is 0x0E33, i.e. DATA1 = 'C4'-tag value.
DATA2 - sequence of two cap-file components: Descriptor.cap and Debug.cap. These components are out of 'C4'-tag.
the questions mentioned above... here they are:
1. Global Platform does not define any data in LOAD command except 'E2' and 'C4' tag. Why DATA2 is transferred out of any tags?
2. Whether the sequence of cap-file components is important? i.e. Can i load Header.cap, Directory.cap etc. in other order than i see in DATA1 field from apdu-trace?
3. Debug.cap seems to be optional component. And what about Descriptor.cap component? Need i load it on card?

666 wrote:
1. Global Platform does not define any data in LOAD command except 'E2' and 'C4' tag. Why DATA2 is transferred out of any tags?Because the components are either optional or only required when communicating with a JCRE that has debugging capabilities. I assume you ran the project in JCOP Tools in debug mode against the simulator? If you did this against a real card it would fail as it does not have an instrumented JCRE capable of debugging code. You could try running the project as opposed to debugging to see the difference.
2. Whether the sequence of cap-file components is important? i.e. Can i load Header.cap, Directory.cap etc. in other order than i see in DATA1 field from apdu-trace?Yes it is. It is defined in the JCVM specification available from the Oracle website.
3. Debug.cap seems to be optional component. And what about Descriptor.cap component? Need i load it on card?No, it is optional and is not referenced by any other CAP file component.
Cheers,
Shane

Question About Adding Ram from other laptop to T-series Thinkpad

Hi,
I have a question about adding additional RAM. Right now I have a 4gb ram stick in the t510. I have an acer laptop which I do not need and there is a 4GB ram stick onboard (maybe two 2gb ram sticks) there in that older laptop. Would it be possible to add one stick of 2gb ram (or 4gb i need to check if it is 2 or 1) from the acer to the lenovo thinkpad making the total ram in the thinkpad over 4gb????
Thanks in advance

Hi Richk,
Yes, I am using a 64-bit operating system. I am running on windows 7. And as for reported incompatibilities....technically taking a RAM from another laptop and placing it in the laptop should be the same as purchasing a RAM card from ebay or something and putting into the laptop right?

Question about Removing Permissions from the System Folder with chmod

Hi
I have a question about the removal of permissions from the System folder (and sub directories and files).
Background
Since installing a new HD, clean install of 10.6, application of updates and moving over backed up user directories I have had several issues with permissions.
I have read several threads on this and using disk warrior and other tools I have been able to fix most of the issues.
The Problem
The issue that remains is a permissions check using Disk Utility keeps reporting
ACL found but not expected on "System".
followed by an extensive list of sub directories and all.
Attempts to repair take hours and the same errors are reported.
Found Solutions
I have read about changing and/or completely removing the ACL from the permissions from the System using two different commands:
sudo chmod -R -N ./System/* ( to remove all ACLs)
or
sudo chmod -R -E ./System/* ( to replace all ACLs )
My Question is ( to the UNIX gurus):
What is the difference between the usage with -E and -R and which is the best approach for a Systems directory and (subordinates)?
Many thanks!!

OK
So I misread on the your instructions about the PW reset, did it, no harm in that. I did also select the options to reset all the permissions for all the accounts and the ACL issues were not resolved. My bad, I forgot to note that.
You do suggest getting and expert opinion but alas these are rather elusive. In most cases the Apple solutions is to do a complete reinstall... I have found that unless you completely wipe a drive and rebuild everything there are often artifacts left behind. Since I have full and redundant back-ups I would rather explore and hack a little instead of a dull old system reinstall. The irony is the system issue I had was it was the result a reinstall and combo update on a new drive. I recognize the risks of entering the realms of the System folders but I am willing to explore knowing full well that I have a path to recovery.
Thanks again for your insights. I come to the forums looking for insights and ideas but not a lecture...

Could someone help with question about PNG export from Illustrator?

I am having issues with PNG exports from Illustrator not opening up once exported.

ANd exactly sorry, this is useless. You have not provided any details about your export settings, version of AI, system info, how you are trying to view and so on. Just saying that it doesn't work is simply not good enough.
Mylenium

Question about taking music from mac to pc and pc to mac

I have a mac book and ipod nano that are only about 4 months old. Well the disk drive on my mac isn't working and I want to add some music to my ipod from a CD. I just downloaded itunes to my dad's PC(windows vista) so that I could upload the music. My cousin told me that she did this once nad t completely whiped all of her music off of her ipod when it synced. Will this really happen?
If I can't use the other computer is there a way I can use a flashdrive to add the music?

If your iPod is formatted for Mac it won't run natively on a PC because Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats). Mac formatted iPods can only be used on a PC that has a third party helper program such as XPlay or MacDrive installed. XPlay is currently only compatible with Windows XP, 2000, Me or 98SE, a new version for Vista is planned for release later this year. Alternatively since Macs can read Windows formatting the other way to use an iPod on both platforms would be to restore the iPod in iTunes for Windows which of course would erase any content from it, not a viable alternative in your case I'm afraid: How to determine your iPod's disk format
As for using an iPod on multiple computers, to do this you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. In this mode you can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
Using iPod with Multiple computers
Managing content manually on iPod
iPod 101: Fill 'er Up
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod

TS3899 I cannot receive emails from anyone not in my list of contacts.

I am only able to receive emails from my contacts. Emails sent to me from anyone else do not reach my inbox.

iOS: Unable to send or receive email
also see:
I can send email, but cannot get email...message i get says imap.gmail.comis not responding. Verify that you have entered the correct account info in Mail settings. Help

The Air Drop Icon is not available. Cannot send or receive messages from anyone not using Messenger.

I have checked to see that my iPad is using the latest software available and it is. I have followed on-line directions to access Air Drop, but I do not have the Icon for it anywhere.
I am not able to send or receive messages to anyone not using Messenger. Thee Apple page says I should be able to.
Any help appreciated.

Yes, it is 2 questions.
My iPad is Model MC763LL/A - I hope that is the answer! I do have Blue Tooth on. I am not connected to WiFi, but am on Cellular Data here. That should not have a bearing on the icon being loaded, should it?

Question about Receiver Determination step in BPM

Hello all,
I have a BPM process similar to Multicat BPM Pattern.
I have some questions regarding how the Receiver Determination works:
1. Does it have to have interface determination in the Integration Directory?
2. Does that interface determination (including the mapping) takes place when sending a message to a receiver from that Receiver Determination step,
or should I perform a Mapping step explicitly in the process?
Thanks ahead,
Yoav.

Yoav,
Am not sure if I understood your requirement compltely.
Case A:If you are using a send step without a Transformation Step.
Then Send will have message A being sent out from BPm and then , during Interface Determiantion this will be transformed into Message B by Mapping in Interface Determination and this message B will be received by receiver
Case B:If you have a transform and then a Send
In this case, the mapping has been done, so you have the message B with you and so, them message sent from the BPM will be message BHope this clarifies,
Regards,
Bhavesh
Message was edited by: Bhavesh Kantilal

Questions about "Restore System From Time Machine"

Looking to fix an apparent system corruption problem on my work machine, I discovered the "Utilities > Restore System From Time Machine" option of the Leopard installation disc. I have some questions that are not answered in http://support.apple.com/kb/HT1177:
1. Does this option erase the hard drive and install a fresh system from DVD, or do I need to do that in a separate step?
2. What about software updates - when are they applied?
3. Will third-party system extensions be reinstalled OK?
4. I tried launching the process on my home machine, just to see how it works. At work I have a dedicated disk for Time Machine, but at home I have a Time Capsule, serving two Macs via Ethernet. I've also configured the TC to give us a shared volume; so in normal operation I have two network volumes, <Username>, containing Time Machine's sparsebundle file for that user's Mac, and "Shared". When I boot from the installation DVD and run "Utilities > Restore System From Time Machine", the backup volume list only shows the "Shared" volume. If I select it, I'm prompted for my TC username and password; I enter it, TC spins up, and then nothing. I cannot continue the restoration process, and reselecting the "Shared" volume does nothing. ???
Thanks in advance for your help.
-- Phil

For the record, here's what I've found out so far:
1. The "Restore System From Time Machine" option seems to want to restore everything, including the system, from the Time Machine backup. I wanted a clean system install, so I did an "Erase & install" followed by a "Restore from Time Machine" in the Migration Assistant. That got me most, but not all, of my settings back; exceptions include the printer configurations, the desktop picture, and the Dock settings.
2. Software updates can be applied after the new system is rebooted.
3. Most 3rd party extensions seem to have been restored OK, but some (like MacFuse) were not.
4. I'd still be grateful for any hints concerning how to get "Restore from Time Machine" to work with a Time Capsule.
-- Phil

Question about receiving mesage from those not on ...

Similar Messages

Maybe you are looking for