Question about redeploying a Project with multiple packages

I know that if I make changes to a single package within a project in SSIS 2012 that the entire project must be re-deployed. Also, I know that the project version is updated when it is re-deployed. My question
is about the packages in the re-deployed project that have not changed. Does anything actually change in the unaffected packages when only a single package is modified? Do the Identifiers for the all packages change or just the package
(or packages) that have been modified? I'd really like to hear from someone with actual experience with this issue.
Harold Jackson

Since you rebuild the version of the package gets incremented. No structural changes occur.
Arthur
MyBlog
Twitter

Similar Messages

Quick question about rendering and exporting with multiple presets

Probably a very simple question but I'm pretty new to PPro, so I'd appreciate your help...
I've got an uncompressed AVI video that I want to export to mp4 using several presets (that means several exports). What I intend to do is the following:
I create a sequence and put my AVI file in there and then I just apply the preset and without rendering go to export media, select my export setting, and put it in the encoding queue at the Media Encoder. Then on the same sequence, I clear the preset and apply a new one, and again without rendering, go to export and then to the encoding queue. I repeat this for as many times as presets as I want to apply. At the end I have created (in no more than 2-3 minutes) several exports in the Adobe Media Encoder queue, that I can launch and go and do something else while encoding...
My question: will the export files each have the different preset applied even though it was not rendered? if it does not work, would that work if I were to do this with each preset applied on a different sequence, even without rendering?
Thanks in advance for your input!

I create a sequence and put my AVI file in there and then I just apply the preset.
Then on the same sequence, I clear the preset and apply a new one, and again without rendering, go to export and then to the encoding queue.
Does "apply the preset" mean selecting an encoding preset
before sending the Sequence to the Queue?
If I understand what you are trying to do...
It sounds like you want to do multiple, different format
exports from the same Premiere Sequence.
If so...
I would Queue the Sequence to Media Encoder once from Premiere,
then duplicate the entry in the Queue (Ctrl+D) and assign the
different encode types to the duplicates in Media Encoder,
(instead of Queueing the Sequence multiple times).
...will the export files each have the different preset applied even though it was not rendered?
A Sequence will be encoded using the assigned settings.
You can set multiple encodes in the Queue, each with different settings.
I'm not sure what you mean by "even though it was not rendered...".
Unless you have specified 'Use Preview Files' in your encoding,
it will make no difference if your Sequence is 'Timeline Preview'
rendered or not.

Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

You should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
Heather

In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt

Is there a way to set up browse sequences for project with multiple TOCs and conditionalized modules

I'm using RoboHelp 9 with WebHelp output.
I've got five outputs, one of which contains Help for common functions, while the other four contain Help for licensed modules. When a user opens the Help for a licensed module, the user sees the core Help and the licensed Help. In addition, files are conditionalized so that searching for unlicensed content from a licensed Help module brings up nothing.
I've been troubleshooting problems with the Previous Topic and Next Topic which, thanks to William, I learned are related to browse sequences. After trying assorted configurations, I've got a couple of questions:
Does RH support only a single browse sequence in a project, even when the project has multiple outputs & TOCs?
If RH supports only a single browse sequence, does that mean there is no way to create a unique browse sequence for each separate output?
If RH supports multiple browse sequences, what is the workflow?
I also maintain a 'master' TOC that contains all the modules, both common and unlicensed. What I've done for now is to autocreate a browse sequence based on the 'master TOC'. When I generate output for a licensed module, which is conditionalized, I only see the TOC for that module and, therefore, can only browse between books and subbooks in that module. I've also verified that topics that do not appear in the conditionalized module, such as for another licensed module, do not appear in the Search results list either.
Carol

Me again, Carol
You also asked about the functional differences between WebHelp and WebHelp Pro, so let me elaborate.
I'm aware of only two major differences (other than the extra benefits of feedback analytics reports and management of "Areas" with authentication in RoboHelp Server).
The behavior of Browse Sequences as explained above
The fact that Content Categories are not supported in WebHelp Pro for this latest version 9.
As for the Browse Sequences you are trying to provide for different modules (licensed, etc.): Multiple Browse Sequences are included in a single .BRS file. The sequences are defined in the XML within the single file.
As a workaround (for either WebHelp or WebHelp Pro) you could create a NGP Help.brs. which you have already created for one module; then backup and archive it. Then, create a modification for the different module before you generate again. The NGP Help.brs. will need to have the same name as your project so you will have to manage the desired .brs file into the project folder when you generate that version. All of your other choices (TOC, Index, Conditional Tags, etc.) would remain the same for the respective modules.
Finally, I note that you are apparently generating WebHelp Pro right now even though you are not publishing it to the RH Server? This is really not the best practice. You should generate plain WebHelp for a web server that does not have RH Server on it (even though you may be getting away with it). As for your concern about "breaking" something; each output is placed in a different !SSL! folder automatically when you generate, so you should be able to generate WebHelp without interferring with the WebHelp Pro output. Then, you can re-publish to the RH Server using WebHelp Pro whenever the server is ready.
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

I am trying to upload a project with multiple tracks to iTunes. only the first track seems to be uploading. what do I do?

I am trying to upload a project from garageband with multiple tracks to itunes but only the first track is uploading. what do i do to make them all upload together?

Couple of questions:
What type of Tracks are they (MIDI, AUdio, Drummer)?
WHen you play your Project, do You hear all Tracks playing?
What happens when you change the Track order, i.e. A-B-C to B-C-A? WHen you export, do you still get only one Track and if so, is it talways the first Track in the list or a specific Track regardless if it is the first, second, or third?
Are you sure you don't have any Tracks Muted or Soloed (which auto-mutes the other Tracks)?
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Command Line Compilation of a Project with different packages

Hi,
I am trying to compile a project through command line, which has different packages with many classes in it. Now If I try to compile package by package It's complaining about other referenced classes of different packages. So I created .bat file, which includes all the packages, but it's complaining input line is too long.
D:\jdk1.3.1\bin>app.bat
My bat file is
javac -d d:\Application\build d:\Application\source\com\ibc\rules\login\*.java d:\Application\source\com\ibc\rules\lookup\*.java .................d:\Application\source\com\ibc\wid\events\*.java d:\Application\source\com\ibc\wid\frames\cust\*.java ...
and so on............
Is there any solution for this problem?
Thanks in advance....

I think the prefered and more elegant way to compile project including packages should be writing makefiles including their compilation, installation, deploying - rules ..
Make is really powerful, the maybe only weak-point is that there are some distribution of them, gnu-make, microsoft nmake .. which are slightly different, that made porting among platforms difficult.
The jakarta-ant was a new approach to this which uses xml parser to proof the dependencies, etc ..
Because I'm not familiar yet with xml & ant and as a in-blooded unix user, "make" is still my prefered way to do roject.
The easiest way to get unix environment required for using make in Windows platforms is to download the "unxutils". It includes make, bzip2, diff, ... and other unix-tools. Refer to this (found from search by google) :
http://www.weihenstephan.de/~syring/win32/
http://www.weihenstephan.de/~syring/win32/UnxUtils.zip
http://sourceforge.net/projects/unxutils/
For more documentation on how to write makefile, use make -tool, see
http://www.gnu.org/manual/
http://www.gnu.org/manual/make-3.79.1/html_mono/make.html

How do I create a NetBeans project with multiple JavaFX (FXML) dialogs?

I'm very new to Java and JavaFX, so forgive what is probably a question asked a thousand times, but I can't seem to find the answer.
I come from a Visual Studio (C# with WPF) background. I'm used to creating a Solution then adding a Project for each dialog/window that gets included in the Solution. Each dialog/window is a class derived from Window, and I simply create an instance of that class when I need to use the dialog.
What I need to do is have a main window (stage) that contains two lists of participants (a red team and a blue team).
Then I need a separate dialog for entering the information for the participant. So when a button on the main stage is pressed ("Add Red Participant"), I want to open the ParticipantDialog. When the "OK" or "Close" button on the Participant dialog is clicked, I want the dialog to be able to return a participant object to the main stage.
Then the main stage adds that participant to the appropriate list.
What I've gathered so far is that I will be creating an FXML file for the Participant dialog (and I assume an associated controller). Then when the "Add" button is pressed, I will call an FXMLLoader to load that FXML dialog. Something like this:
FXMLLoader fxmlLoader = new FXMLLoader(getClass().getResource("ParticipantDialog.fxml"));
Scene scene = (Scene)fxmlLoader.load();
final Stage participantDialog = new Stage();
participantDialog.setScene(scene);
First question is: is that correct so far? Am I at least on the right track?
Next question is: how or where do I create the FXML and controller files for the participant dialog using NetBeans? Should I create a separate project to make the participant dialog and then copy those files over, or is there a way to make the files within the parent project? And if I make the participant dialog in a separate project, what's the easiest way to access it from my main stage?
I feel like I'm missing something simple here because this seems a lot harder than it should be.
Thanks in advance for any advice.

> is that correct so far?
Yes the sample code you have is fine to launch a new dialog when your Add button is pressed .
> I create the FXML and controller files for the participant dialog using NetBeans?
You can edit FXML text in NetBeans, but I think that is kind of tedious.
You might want to create the FXML using SceneBuilder.
You can use SceneBuilder in NetBeans.
You may want to get it working without FXML first.
For example, use the JavaFX scene graph API, then convert your program to use FXML once you are more comfortable with the JavaFX system.
The piecemeal approach cuts down on the amount of learning you need to do at one time.
> Should I create a separate project to make the participant dialog and then copy those files over.
No.
Just use a single NetBeans project.
You will have separate FXML files for your main stage and your participant dialog, but they will both be placed in the same NetBeans project.
> is there a way to make the files within the parent project?
In NetBeans 7.3.1, do the following:
File | New Project | JavaFX | JavaFX FXML Application
This will create a sample project with a sample fxml file.
Modify the sample project files to get what you want, changing the sample fxml to your main stage fxml and adding a new participant fxml to the same directory.

I have a question about Configuration of Post with Clearing

I have a question about confiruation of the post with clearing which is t-doce 'FB05'.
When I make post with clearing on 'FB05', I can change the additional selections.
Where can I control the confiruation of the additional selections in t-code 'FB05'
Please, tell me the menu path.

Hi,
In SPRO, go to
Financial Accounting (New) > Accounts Receivable and Accounts Payable > Business Transactions > Incoming Payments > Manual Incoming Payments > Make Settings for Processing Open Items > Choose Selection Fields
Hope this helps.
Thanks

Question about autodiscover in case of multiple bound namespace

Hi Experts,
I have a question about the autodiscover behaviour. Let's assume we have the below infrastructure:
SiteA :
MBX-Server-SiteA : Member of a DAG
CAS-Server-SiteA : outlook anywhere url = siteA.domain.com
SiteB :
MBX-Server-SiteB : Member of a DAG
CAS-Server-SiteB-1 : outlook anywhere url = siteB-1.domain.com
CAS-Server-SiteB-2: outlook anywhere url = siteB-2.domain.com
We have DB-1 and DB-2 that have copies in both MBX servers.
My question is how does exchange select the access URLs to return in the autodiscover process? I know that it depends on where the mailbox is hosted but can't find details about the process in the technet articles.
Thanks.

There's quite a few details that are involved in the Autodiscover process. First of all - probably the most important thing is that there are 2 stages to the whole process.
In the first stage, the client is simply concerned with getting the address of a CAS server that will help it further. We'll keep things simple and assume your scenario where the client is located inside the network and is domain-joined. The details of the
LDAP query are detailed in
this link. (At the time I was investigating this I've actually went ahead and ran the queries using the ldp.exe client against the Configuration partition of the respective AD domain - it's worth seeing the actual responses.) An interesting trick here is
the 'keywords' attribute that's stamped on those SCP entries. The reason behind it is that you don't want a client located in a site to go half across the globe in order to connect to a CAS server, when there's one available in its own site. One simple way
to get the 'keywords' attribute stamped is through the Set-ClientAccessServer cmdlet, using the -AutodiscoverSiteScope parameter. In your example, you'd probably want to run it against the CAS server in Site A and specify the name of the corresponding AD site
('SiteA') and correspondingly against the 2 CAS servers in Site B (using 'SiteB'). Once the client has got the response to his query, it will attempt to select one server that's handling the site he's in (essentially it will filter the results based on 'keywords'
-contains <client-site>). Now that we got our endpoint we can go to stage 2.
In stage 2, the client will actually use EWS in order to query the Autodiscover service itself running on our target server. There are 2 possible interfaces of accessing the Autodiscover service: POX (Plain Old XML) and SOAP. POX will be targeting the ../Autodiscover.xml
URLS, while the SOAP one will be using ../Autodiscover.svc URLs. Details about this including some hardcoded parts are
here. What happens next is detailed in point 3, section 2.1 The Autodiscover Process
here. This last link is the key to the whole process:
"It provides a list of CAS that has AutodiscoverSiteScope information set for the
Associated AD site of the Database where the client Mailbox is located."
In other words, the CAS is smart enough to return the URLs belonging to a CAS server in the AD site where the client's mailbox' database is active.
My advice is to test this on your scenario. Tests can be done here first-hand: the Outlook's tray icon Test E-Mail AutoConfiguration can be used or alternatively - if you want to see the details in the communication - SoapUI
for the SOAP access method, for POX there's an extension called 'Postman for Chrome' that can be used. I've used all these in my tests back when I was fighting conflicting results from the articles around the web about Autodiscover.
That's a long way of saying we get the AutoD URL of a CAS server closest to the workstation, which then provides the configuration to use which are the the URLs closest to the mailbox :)
By all means look at the SOAP response, but Outlook will only use POX. Lync does SOAP along with other 3rd party apps.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Loading project with multiple libs.execs error

I used workshop to create a project with several shared libraries and several executables. Things were going along just fine until I quit and tried to re-load the project. Now I get the following error:
"${PATH}/Foo.prd", line 448: Error Object ""Foo.so"" used in assignment has not been defined.
Error: Internal consistency error in "../src/prdparse.cc", line 1105.
I have see one other post on this error but it did not have any replies.
Thanks for any help I can get!

I'm working on a java project divided in 2 packages
"test" and "agentslibrary".I'm working on a project divided into roughly 200 packages.
I have to retrieve some results frome some classes
(even in different package).So? No difference to classes in the same package, apart from the import.
Now I am using static methods to do this,What does static have to do with anything?
but I have
some problems and getting some nullpointer
exception.Then you have bugs in your code.
Which is the best way to do it?
Moreover I have a class("myagent") which extends
another("agent"). From a main class I instanciate
"myagent" but when I try to use a get method inside
Agent (the superclass of the class I just
instanciated) , I get a nullpointer error.Probably because you implemented something incorrectly. NPEs have nothing to do with packages or the "static" keyword or whatever.

Question about creating a report with variable columns

Post Author: Archmage
CA Forum: General
Hi,
Is there a way to create a Crystal report based on the following situation?
Run a stored procedure with two date parameters:
If you run from 9/1/07 to 9/30/07, then the data result would be as follows: (example only) and the report format would follow
Cust        Sept 07
AB100     2000
If run from 8/01/07 to 9/30/07
Cust       Aug 07       Sept 07
AB100     1000          2000
if run from 7/01/07 to 9/30/07
Cust       July 07      Aug 07       Sept 07
AB100     1000         1000          2000
So Basically, based on the parameters chosen, it could be a report with one, two, three, or even 40 columns, each column representing the month.
Thanks for any ideas

Post Author: Archmage
CA Forum: General
Does this require that the stored procedure has already created the different columns by month first? Or can the raw data be a three column source
like
CUSTNO DATE     AMT
AA100      8/1/07    1000
AA100      9/1/07     2000
AA100      10/1/07 2500
And checking the format with multiple columns will create the Crystal report like:
CustNo     Aug 07        Sept 07        Oct 07
AA100      1000            2000            2500

Question About streaming live video with FMS3

Thank you very much for you efforts ...
I've tested an exciting tutorial about   streaming live video with Flash Media Server 3.5..
every thing went good and i could see my webcam broadcast from my machine through my web site but unfortunately I can't see it from any other machine
I'm using Microsoft windows XP SP2
and flash media live encoder 3
but my web server run UNIX
is this a problem???
Please send me feedback if its possible
thank you very much

Dear Janaki
Thank you very much for you efforts ....
i've done what you asked me exactly
this is what i got when I've opened the URL from my machine which runs the FMS
#Date: 2010-03-25
#Fields: x-category    x-event    date    time    x-pid    c-ip    cs-bytes    sc-bytes    x-sname    sc-stream-bytes    x-file-size    x-file-length    x-status    x-comment
session    connect    2010-03-25    23:11:17    7932    127.0.0.1    3073    3073    -    -    -    -    200    -
session    connect    2010-03-25    23:12:43    7932    127.0.0.1    3073    3377    -    -    -    -    200    -
stream    play    2010-03-25    23:12:43    7932    127.0.0.1    3139    3451    mylivestream    0    -    -    200    -
and when i opened it from another machine nothing changed or added to the log file
is it a problem with my webserver ??? its Lunix server and my OS is windows???
thank you very much

Question about idvd project with multiple movies

Is there a way to drop in multiple movies and have each movie play right away when it is clicked? Right now the first movie plays on one click but the rest go to another menu where you have to click play movie. I just want my main menu to show the 4 movies I have and then immediately play them when they are clicked.

You can put them in an iDVD slideshow and they will play consecutively. But don't assign a transition in the slideshow:
Click to view full size
It won't matter what slide duration you select.
OT

Question about redeploying a Project with multiple packages

Similar Messages

Maybe you are looking for