Question about replacement hard drives and clean win7 install fo x61

We are getting a X61-7674 from my wife's job- they are removing the original hard drive so I need to get a new one and do a fresh install of Windows 7.
Two questions- can I get any laptop hard drive or are there certain brands that won't work with the x61- I have looked at the prices on the Lenovo site vs. newegg so would like to be able to buy a generic 2.5 drive.
second question- in terms of doing a clean install of windows 7, what is the sequence for installing drivers- assume I load w7 first- what drivers will I need to load- do I have to put them on a thumb drive to load them? Basically wondering what will work once I have loaded W7 and what drivers i'll need to download.
Would appreciate any help on either question-
Thanks.

1) you can use any 2.5 inch sata hdd of 9.5 mm thickness.
2) Windows update should pick up most of the hardware and install the correct drivers for them. However, there are still some stuffs that you have to install yourself. Such as:
http://forum.lenovo.com/t5/Windows-7-Knowledge-Base/Will-the-ThinkPad-X301-run-Win7-x64/ta-p/325173
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Question about replacing hard drive

Hey everyone. I had a question about replacing a hard drive for a 2012 midyear pro. I have replaced hard drives before on windows machines, but this is the first mac I have owned. It didn't come with a hard drive when I bought it, but I do have mavericks installed on a usb. As far as a new hard drive, will any 2.5 laptop hard drive work? I read it needs to be 9.5mm thick. Is that correct? As far as I am concerned, hardware is hardware and should be the same as replacing a hard drive on a dell laptop but wanted to see if apple has any weird restrictions.
Also, is there anything I need to consider or be aware of when putting in a new hard drive? Or can I just hook up the hard drive and plug in the USB and install the software onto the hard drive. Thanks
Excuse and ny ignorance as I am new to macs.

scottrf8 wrote:
As far as a new hard drive, will any 2.5 laptop hard drive work? I read it needs to be 9.5mm thick. Is that correct?
Yes. Any SATA drive will do with those specifications.
Also, is there anything I need to consider or be aware of when putting in a new hard drive? Or can I just hook up the hard drive and plug in the USB and install the software onto the hard drive.
Assuming that the installer is functioning correctly, install the HDD in the MBP and engage the installer. You should come across a 4 option menu. Select Disk Utility from it. Open Disk Utility>Erase and format the HDD to Mac OS Extended (Journlaled). One you finish that, you may install the OSX.
Ciao.

How can I wipe my hard drive and clean install Mountain Lion?

Hi I have a 21.5 inch mid 2011 iMac running Mountain Lion, I want to wipe my hard drive and clean install Mountain Lion. I dont want all my stuff back, just photos and music, the rest I'll reinstall my self. I also dont have a exteranl harddrive. only two USB's one 2 GB and the other 8 GB. How do I do this? And I dont want to pay for mountain lion again. Thanks!

I made my partition and am currently reinstalling mountain lion to put on my flash drive. I'm using Lion disk maker 2 thats compatible with mountain lion. I'm doing it right, correct?

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Power on the computer and insert the DVD immediately.
Hold down the 'C' key to boot from the Snow Leopard DVD.
http://support.apple.com/kb/ht1533
After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
You'll likely need to partition and format the new drive before it's recognized.
http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
(Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

How do I reinstall CS6 Extended 64-bit after replacing hard drive and OS?

How do I reinstall CS6 Extended 64-bit after replacing hard drive and Windows 7 64-bit OS?

You can download the trial installer directly. Find the appropriate link below.
You must be on a trial download page to use the links, otherwise you get an error message.
For example, load the following page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
before pasting the link into the address bar.
http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.7z
http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.exe
You need to kepp both files downloaded into same folder and after download click on .exe file to extract .7z

New hard drive and cannot re-install Windows 7

RE: HP Pavillion DV7-4270us
Windows 7 64-bit
4MB Ram 640 GB Hard Drive
After receiving the S.M.A.R.T. warning about possible hard drive failure soon, I installed a Seagate 500GB hard drive. Next I began the recovery process by using my rescue discs. All that went fine.
Then the screen stated that after the pc restarts it will load all software and drivers. It will turn off and on several times and this will be normal. Please do not shut down pc.
Now is where my problem began. It never loaded the software and drivers even after running for 7.5 hours. I new this was extreme.
I just noticed on this forum someone else had a similar issue. The reply said to be aware and not to install a smaller hard drive than you originally had.
I am assuming this is my problem also. If anyone knows for sure, please let me know. I suppose I will install a 1TB hard drive, even though that is more than I will ever need.
Thank you!

Hi:
That could be the issue, or the recovery disks you made won't work--even on a 1 TB hard drive.
Rather than tossing money into a new HDD, if you can read the 25 character product key on the bottom of your notebook, you can make your own plain W7 x64 installation media, which will install on any size hard drive.
Here is how to do that...
Link to the W7 ISO file downloads is below. Download the applicable version of Windows 7 that is on your product key (Home Premium, Pro, or Ultimate). The SP1 Media Refresh files are the latest ISO files.
http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-Multiple-Languag...
Use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link below. You need a DVD or a 4 GB flash drive to use the USB method of compilation.
Use the 25 character windows 7 product key to activate your installation.
http://download.cnet.com/Windows-7-USB-DVD-Download-Tool/3000-18513_4-10972600.html
Then go to the PC's support and driver page to install the drivers you need.
Before you try the above, see if making this CD patch works for the factory recovery disks.

I have bought a photoshop elements and have installed it on my MacBookPro. I have just bought an iMac and what to install on this computer as well. The iMac does not have a disc drive. I have copied the file onto a remote hard drive and tried to install b

I have bought a photoshop elements and have installed it on my MacBookPro. I have just bought an iMac and what to install on this computer as well. The iMac does not have a disc drive. I have copied the file onto a remote hard drive and tried to install but it thinks I have a pirate copy. What can I do?

If you click the link in my first post in this thread, then click "still need help? Contact us" it takes you to a page that looks exactly like the page where you started, but isn't. Select PSE for the program you want help with, click "Activation and Signing In" for the problem area and you will see this:
The gray area below the blue bar is a link to start a chat.

Emac Hard Drive and Cleaning Question

Hello to all,
Sorry for all the crazy questions about this emac. I have never owned a mac before so this is a learning experience as I go and I hope no one minds the questions.
Here is my latest question. I needed a new hard drive and it came out really easy. Within in about 20 minutes I had the hard drive out and in my hands. Wasn't as tough as I read. Anyway, my quesition is, I don't have the original software that came with the mac but I can get that from apple.
If I would put a new hard drive in would I still need the original software for the mac or would I get a new disc with the hard drive that would now be the software for this mac?
Also, I noticed on the green pc board that there is some slight corrosion around some of the solder points and things. Could I use a electronic contact cleaner on this to clean it up? Or is there anyway to clean it up safely without messing up the board. The mac runs but wanted to clean it up.
Thanks for any help and sorry for the loooooooooong question.
Xray

Apple does not bundle Mac OS X with any replacement hard drives; you must purchase OS X (or contact Apple for a replacement set of the eMac's original discs) separately. You can then boot from the OS X Install disc, launch Disk Utility from the Installer/Utilities menu, and use Disk Utility to format (and if desired, partition) the hard drive as Mac OS X Extended.
I've not heard of corrosion internal to the eMac. Do you know if the Mac was kept in an unusually humid or wet environment, such as a beach house? While contact cleaner itself should be harmless if it's dried thoroughly before re-powering the computer, I'd be reluctant to do any sorrt of scrubbing, even light pressure with a cotten swab, on the wires on the logic board.

Just Replaced Hard Drive and Time Capsule Suddenly Almost Full

I just replaced my 200GB hard drive (with approx. 165GB used) with a 500GB hard drive. My Time Capsule now shows about 330GB in storage...about my original 165GB x 2. So, I'm thinking that I now have my 165GB from my old hard drive in storage, and the 165GB from my new hard drive.
My question is...how do I correct this?

Was this an internal drive that was replaced? If so, my guess would be that the Time Capsule sees this as a new computer and will backup the contents of the entire drive.
Open your Hard Drive and look for the SHARED heading on the left. Click the Time Capsule icon and a Time Capsule folder will appear in the window on the right. Double click this folder.
You should now see a xxxxx.sparesbundle file for each computer that has been backing up. The sparsebundle file contains the name of your Mac and MAC address. If you see the same listing twice, you will know that the TC has made a new complete backup of your computer.
I haven't experienced your situation first hand, so I'm not clear on whether you will be able to access the "old" backups from your "new" computer. That might be the subject of a new post if that is the case.

Replacing Hard Driver and RAM

Is it okay to replace the Internal Hard Drive and RAM at the same time? Also, once I replace the hardware how do I restore my last Time Capsule Backup to the new hard drive?

Hello Jason Castellani -Usually best to do one major change at a time in case something goes wrong. That said I can see where you are going here once you got your MBP apart. If you are a gambling man go for both, esp if you have done the procedures before and comfortable with the operation.
See this knowledge base article for your migration question.
http://support.apple.com/kb/HT1177
Hope this helps
Message was edited by: leroydouglas

Replaced hard drive and iTunes does not recognize my laptop

My 2011 MacBook Pro froze up and when I rebooted the folder error came up. Replaced hard drive with a SSD drive and my new OS has a new name. When I logged into ITunes I had to delete an account due to my limit being reached. My old Mac ID was showing and it was signed up for the cloud at a fee of $24.00. The same MacBook but with a new hard drive had a new ID and I can not restore any of my pics or ITunes music. Am I missing a step or can I rename my Mac so it will match my old ID? If I rename it can I download my old info off of ITunes?? Thanks

I'm not following much of the question and for me it would help to get some terms straight. You only "log into" the iTunes Store (online). What account was this and what limit??
Old Mac ID? Your AppleID is what you use to log into the store. It does not change with computers. You always use the same one, perhaps updating the email address from time to time.
By the cloud do you mean iTunes Match?
Sure, your computer hard drive has a new name (you can rename it -- my series of drives have kept the same name for 23 years now). That doesn't affect logging into the Store. Start up iTunes, log into the Store using your same Apple ID, download available past purchases, and if you have the Match service download your other music too. You may have to authorize the computer again. I don't know which part of the computer is used for authentication and if that got lost with the old drive.

New Internal Hard Drive and Clean Install: Errors, Frustration and Hopelessness

First Off:
Macbook 13" (late 2009) ... It was running Mountain Lion 10.8.5 with 2 gigs of memory and 160gig stock hard drive.
I started this process almost a week ago and despite numerous attempts every night I have had no luck. I appologize if the details here are fuzzy, my head is spinning after reading dozens of threads and attempting multiple solutions to each error I've received and i cant remember everything I've tried so far...
I got my new memory in the mail first, upgraded to 4 gigs and everything works fine with that..
Next came my new Seagate Momentus 750 gb 7200 rpm SATA 3gb/s 16Mb Internal Hard Drive.
Using this guide: http://osxdaily.com/2012/02/17/make-bootable-os-x-10-8-mountain-lion-usb-install -drive/ (and cross checking other guides) I ended up creating a bootable external drive using my 160gb External Firewire drive for my clean install to my new hard drive. So far so good.
I then shut down the computer, removed the old internal hard drive, installed the new, restarted the computer holding option key and booted up using the External Hard Drive, and the install software started fine. Note: I have attempted to re-erase the drive so many times without luck that I cant remember if I actually successfully erased the drive originally to begin with the installation, but either way I started the OSX reinstall and it got almost all the way finished before it gave me the error message:
"Install failed. Mac OS X Lion couldn’t be installed, because the disk (volume name) is damaged and can’t be repaired. Click restart to restart your computer and try installing again."
restarting of course did nothing, it repeatedly gave me error messages and made me quit installation...
Disk Utility isnt getting me anywhere, im either getting errors like:
"POSIX reports: the operation couldnt be completed. device no configured"
it wont allow me to erase the drive or partition the drive
"Disk Erase failed with the error: File System Formatter Failed"
and everytime the drive fails to erase or partition, it disappears from the list of drives on the left of the disk utility screen and i have to restart the computer for it to reappear for a second try. Typically the volume under the drive is greyed out and says that it is unmounted.
Ive zapped the PRAM.... and Ive done other things that I cant quite remember right now because my brain is boiling from reading too many **** threads on multiple devices....
halp.
halp me plase.

So funny story...
While writing this discussion I had to come to the computer and try to erase the drive so I could see the error code for reference. The erase didnt work as usual but I wrote the error code down here.
I also could not remember the error code for partitioning the drive so I attempted that as well so I could write down the code, and this time it magically partitioned successfully! The only thing I did differently was that I didn't rename the partition because i figured it wouldn't matter anyway. Since the partition was successful, I attempted the Reinstall of ML and it magically worked!!
I dont know what the **** happened but ive been attempting this install every night for like 3 hours since Monday and this is the first time it went through... for no apparent reason?
Ghosts? Magic? Full Moon?
we may never know...
Thanks anyways guys!

How to replace hard drive and transfer everything over?

I've looked everywhere but am unable to find a definitive guide on how to do this.
Currently I have an early 2011 MBP that came with Snow Leopard and upgraded to Lion later. It has an HDD and I want to replace it with an SSD and transfer everything over to the SSD. Considering Lion created a Recovery partition (and there is also an EFI partition), I'm confused on how to do this the best way to basically copy my current hard drive to the new SSD.
The best I've figured out is to connect the SSD with a SATA-USB cable, use the Lion Recovery Disk Assistant ( http://support.apple.com/kb/dl1433 ) to create a Recovery partition on the new SSD, then, booting into Recovery, install Lion on the new SSD, and then use Migration Assistant to transfer all my files over.
Is there a simpler or better-explained way to basically copy my current hard drive over to a new SSD and then remove the HDD and use the SSD?

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

G5 Tower, replaced hard drive and now can not get it to work- HELP

My G5 (tower) crashed hard & after a trip to the Genius Bar at my local Mac Store I found out the hard drive was dieing.
The Mac person fixed some problem files & told that I could replace the hard drive. I bought a 350 GB SATA 3.5in hard drive and placed it in the second slot in the tower. I then used time machine & backed up the hard drive to the second slot (after I backed up on an external hard drive- just to be safe).
I removed the hard drives & placed the new one in the A slot. When I turned on the computer I had the ? folder. I turned off & restarted holding the option key and got two folders, one with a turn back arrow & a rt facing arrow. Clicked either did nothing. Does any1 know what I am doing wrong?? If so please let me know. Much appreciated.

Did you reset your PRAM?
command-option- p-r
Hold down all four keys as the mac starts up and wait for the chimes to ring twice. Then let the machine start up as usual.
If it works be sure to check your date and time settings (the system will tell you)
You can also start up from your system disk holding down the c key as it starts-- go past the language screen and open disk utilities from the menu bar run disk repair and then repair permissions. Set your startup disk to your new drive.
Hopefully that will take care of the problem.

Question about 2nd hard drive set up

i have 2 hard drives and i wanted to know, do i have to install mac osx on the second hd so i can save stuff on it. i tried resetting my scratch disks in fcp to the second hd and it says its "write-protected." i also tried moving folders to the second hd but it says it cant cause it cant be modified. would i be able to undo the reinstalltion and install again to correct it?
thx

FCP second or third drives only need to be Mac OS X Extended, not journaled, when no OS is installed. You absolutely do not need an OS installed to access other drives in your computer.
While 'ignore ownership' could work, it won't if the permissions are messed up and the drive is rated as Read Only. Use Get Info after selecting the drive, Cmd-I. Access info is listed first in the Ownership and Permissions section. There is a disclosure triangle to show more about the ownership and a lock to allow opening and changing the permissions.
Once you have set the ownership properly you can use the FCP scratch disk preferences to set the drive.
Rick

Question about replacement hard drives and clean win7 install fo x61

Similar Messages

Maybe you are looking for