Question about reseting the time of day trigger.

A little while back the college was running a promotion and at the last minuet they decided to stay open later then normal to server the needs of our students.  I reset the time of dayclosing time with the CCX editor and ga 6 the phone shut down when I had change it to 7:00.  I then rebooted our contact center servers so that the new close time would be active but in rebooting the 2 servers all the callers in queue were dropped.  Is there a way to change  the time of day trigger and rest it with out rebooting the servers? 
Thanks
Eric

Hi Eric,
When you edit the UCCX scripts \ prompts \grammers \ applications, please refresh these pages from the UCCX Admin-> Application path.
Yes, as the UCCX high Availability works in "Warm standby" modes it is expected that the calls in Queue will be dropped, where as the connected calls will continue at the cost of missing Call details.
Hope it helps.
Anand
Please rate helpful posts by clicking on the stars below the right answers!!

Similar Messages

  • Need to reset my DLink 2750B about 3-4 times a day.

    Well, It has been a few months since I posted about the same problem here. About 3-4 times a day (almost always when I am online), I lose my internet connection in the entire house. All I have to do is unplug the modem, wait 15 seconds, plug it back in, and everything is fine. A few hours later, rinse and repeat. I have called Verizon several times about this issue. The last time, I wasted about 2 hours of my evening. One of the "customer service" reps had me repeat all of the test that I had already done myself, only to arrive at the same result. She transferred me to "tech support", and I spent an hour on the phone with someone else, repeating the same tests over again. Guess what - same result. I was told that a Supervisor would call me within 2 hours. Clearly, this was just to get me off the phone, because nobody called. Now, here we are, 5 months later, and the same modem, same problem. No way I am wasting another 2 or 3 hours repeating the same steps all over again, I will just end up going off on some rep who really doesn't belong in that position. I just thought I would post another example of the "fine" customer support we have all come to expect from Verizon. I will now go on eBay, to see if I can find another Verizon modem for sale, because Verizon won't even let me purchase a better modem. Good luck with your concerns, I hope you have better luck than I did.

    Not sure if you will see this, but it's somewhat refreshing to see that others are having similar issues and that it's not just me. My Dlink 2750B needs a reboot every couple days so I guess I should count my blessings...
    I spent about 45 minutes on the phone with support doing the same tests as have been done multiple times on my line, (no issues found) and finally convinced them that I was having a modem issue, not a DSL issue.
    My modem would keep the internet light on solid green even if I unplugged the DSL line. all my devices would be locked out (no connection) and when attempting to connect, the device would bounce between "authenticating" and "obtaining IP" until it finally failed.
    Received a new Actiontec from verizon (free) to replace the Dlink. This morning, sure as can be, the modem locked us out.
    As I stood in front of it thinking "yay.... this crap again" ready to install the Actiontec, it rebooted on it's own. Connections are good, speed is good.... ~sigh~
    I would like to know what you mean by "signal is better" with the Actiontec. Do you mean more range or faster speeds when comparing to the 2750?

  • Iphone 5 resets the time several xs a day??

    My iphone 5 resets the "time" several times a day to the incorrect time.  My settings are to set the time automatically, but when the "reset" happens, I have to go back into settings and turn "set automatically" off and then back on again.  Then the correct time shows until it resets itself again (to the wrong time).  Does anyone know of a solution?

    Go to settings -- sound and scroll down.  You will see a list with entries like Ringtone, Text Tone, etc.  Select Text Tone.  Scroll up and turn off, or change, the vibration.

  • DVR STB will not hold the display of the time of day.

    I am new to FIOS.  I have a DVR Set Top Box for my HD TV.  I prefer to see the time of day displayed.  I set this option in Menu/Settings/Set Top/Display and it works OK UNTIL you change the channel.  Then it displays the new channel and DOES NOT revert back to the time of day as it is supposed to do.
    Called Verizon.  They reset the box.  It worked OK for about 30 minutes then went back to the same problem.  I don't want them to reset it again because when they did it wiped all of my favorites.
    Any solutions will be greatly appreciated.
    Solved!
    Go to Solution.

    Try rebooting the STB and then change the clock setting and change it back. That worked for me when i had this issue. I have seen this reported a couple of times and most of the time if this fix didnt work, the issue resolved itself within a couple of days.
    Also, it should be noted that with the 1.7IMG release they changed the way the front display functioned. It now changes to show the channel number at every program change and then reverts back to showing the clock after about 2 minutes.
    "If your problem has been solved, please mark it as such. Don't forget to hand out your Kudos!"

  • With my iPod Touch I need to reboot the wi-fi about half the time when accessing wi-fi connected apps, more like 80 percent when using Viggle. Irritating.

    My iPod Touch has a quirky wi-fi connection. About half the time I need to go to settings and reboot the wi-fi to use apps like weather and mail, more like 80 percent with Viggle. It is irritating. Is it an iPod software problem? I don't have this problem with other platforms.

    Do you have this problem when connected to other networks?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If you ony have the problem with your network that indicates a problem with your router.

  • My MacPro 1.1 Keeps Crashing about 4-5 times a day

    Can anyone give me an idea what to do.
    My Mac Pro 1.1 12GB Ram connected to a 30 Cinema Dislpay keeps crashing about 4-5 times a day. I have a ATY, Radeon X1900 graphics card.
    Not sure what to do?

    Normally I would say get rid of the X1900 if you plan to continue to use it.
    You have been cleaning it every 3-4 months, as those cards are terrible on dust and heat.
    Also get down to one good set of RAM or just pick up a 4GB kit 2x2 $25 from Amazon.
    While at it, can't hurt and definitely a big plus to go with 250GB $139 Samsung EVO SSD.
    Got a good older clone? should. Every freeze and crash is likely contributing to more corruption of ifles and directory making it worse. So good idea to start with new RAM, newly formatted drive, clean install of system.

  • Can the iPhone have settings profiles?  I want the settings of what apps are using the "call home" automatically set based on my location or the time of day.  Is this possible?

    Can the iPhone have settings profiles?  I want the settings of what apps are using the "call home" automatically set based on my location or the time of day.  Is this possible?  Of course the GPS location feature will need to be on in order for this to work.  But the idea here would be to optimize battery life by disabling the 'call home' requests of apps.  The settings profile should also support downloads as I would like to download and allow it when I am on WiFi but not so much when I am using my cellular data.

    No, this is not possible as the sandboxed nature of iOS would not allow any app to modify another app like that. Such a feature would have to be enabled by Apple as a part of iOS itself. You can submit feedback to Apple about the idea if you wish to.
    https://www.apple.com/feedback/

  • After iOS 7 download have to do "hard resets" several times a day...phone freezes and shuts off

    After ios7 I have to do "hard resets" several times a day. Phone freezes and shuts off.

    Hello Hockey2013,
    Thank you for using Apple Support Communities.
    Usually for an iPhone that is doing this I would recommend resetting the device, but you do that already. Next I would have to recommend backing up to iTunes, then restoring the device.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    After you restore the device I would set it up as new and use it for a bit to see if the issue persists. If it does not, restore from your backup and then test it for a bit again to verify that it works.
    Regards,
    Sterling

  • How can I print a month calendar without the times of day from the day calendar

    The obvious way to put items into iCal is via the day calendar. But I want to print the calendar as one month to a page and there I do not want the times of day.

    It seems like a simple solution must be at hand. There is an option in the iCal Preferences (General) panel--Show event times. With this command unchecked the screen view of the month view is free of the times of day, but when I print the month view the times of day are printed.

  • For iPhone4 with iOS7, how can i see the time of day for a voice memo instead of the length of time for the recording?

    For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

    For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

  • Hello THIS IS RAZA I GOT A MACBOOK PRO I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanks Screen Shot 2015-03-21 at 10.

    Hello
    THIS IS RAZA
    I GOT A MACBOOK PRO
    I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanks

    This is a scam. Do not phone these people, at best they will charge you for unnecessary 'cleaning' and at worst they will gain access to your Mac and steal your data. You've probably managed to install some 'adware' which is producing this fake warning. 'Adwaremedic' should remove it and is safe to use - please see
    http://www.adwaremedic.com/index.php

  • How do you change the time of day presets in ical?

    How do you change the time of day presets in ical?  I would like them to be only 1 hour difference, with the preset start times of 10:00 am and end time of 6:00 pm, if I have anything starting after 4:00 pm it also changes the date to the next day.  Incredibly annoying!

    Hi there jenni6,
    It looks like this is possible in the Calender prefernces. Take a look at the article below for more infromation.
    Calendar (Mavericks): General preferences
    http://support.apple.com/kb/PH14994
    -Griff W.

  • HT5312 i do not see the Rescue email link under the security questions to reset the questions and answer

    i do not see the Rescue email link under the security questions to reset the questions and answer ?

    You need to contact Apple, either through the link in that article or by phoning them and asking for the Account Security team.
    (82021)

  • The time of day doesn't sinc from my iphone to my pc is there a way to set that?

    The time of day on my PC doesn't sync with my iphone 4S in my calender. The PC shows the event 3 hours behind the iphone. Is there a setting I need to change?

    Unfortunately you can't restore an incomplete backup.

  • Reset the time when he is typing(keyboard event) any info in from.

    Hi All,
    We have implemented auto session logout(if user is ideal for 15 mins one message popup will come and after 5mins user gets  logged off) in our portal and it is working fine. when user navigate to other page the timer is getting reset  but if user working in same page for 15 mins popup message comes and if is not clicking 'ok'user gets logged off .
    For navigation i am using EPCM.subscribeEvent("urn:com.sapportals:navigation", "Navigate", pop);
    My requirement is to reset the time when he is typing(keyboard event) any info in from.
    Please provide your inputs.
    Thanks,
    Santosh.

    Dear Santosh
    Regarding events between WD and Portal you need to consider the interface
    IF_WD_PORTAL_INTEGRATION
    Please check this to see how it is done
    http://wiki.sdn.sap.com/wiki/display/Community/Usingportaleventtocommunicatemultipledatabetweendifferentwebapplication%28WDAandBSP%29
    Kind Regards
    /Ricardo Quintas

Maybe you are looking for