Question about rfc sender

Hello,
I was reading a help.sap.com site. I don't understand that sentence:
"The communication channel in which the RFC adapter is defined must be defined for a service of type Business System in the area Service Without Party. In the PCK, you must create an empty party record." from http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm
So this means: I need a Business system. NO Business Service, right?
And what is meant by empty party record? Does this mean I need to let the partner fields empty?
thank you.

Parties are used when u exchange the data between different parties,B2B.
B2B means Business to Business communication .It is used when there is exchange of information between two different companies or landscape. In case of B2B every party has it own rules which must be followed if we want to communicate between different organization.
Check out this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/ca/efb540efe68631e10000000a1550b0/content.htm
So there lies the answer...
Regards
Reward points if useful

Similar Messages

Question about RFC adapter

Hi,
There is this little concept about RFC adapter
I would like a liitle clarifiaction about..
Here it goes..
Let's just say I have made an RFC in R/3.
The same I have imported In xi.
now when we say RFC ...By definition
it is a remote enabled function module.
We import the "interface" of the Same in Xi
So if I make changes in the BODY of the RFC in
R/3... do i need to reimport it in XI.
Besides when XI's reciver RFC adapter is using the
Rfc's interface to make changes in R/3
is it using a Copy of this RFC created in R/3
I would like to intercep at the point it's doing so...
tried putting a break point in the body of rfc.
Another question is regarding RFC sender adapter
Program ID..tcp Ip protocol.
Conceptually How does this connectivity takes place
I tried and it worked ...
I dunno How to explain this connectivity taking place
just on the basis of PROGRAM ID...
Kindly Help

Hi Deepak,
+
>>We import the "interface" of the Same in Xi.So if I make changes in the BODY of the RFC in R/3... do i need to reimport it in XI.+
Yes you have to.
>>Another question is regarding RFC sender adapter.Program ID..tcp Ip protocol.Conceptually How does this connectivity takes place I tried and it worked ...I dunno How to explain this connectivity taking place just on the basis of PROGRAM ID...
·An RFC server program registers itself under a program ID to an SAP gateway (not for a specific SAP system).
·If an RFC call is passed on from any SAP system to this SAP gateway with the option Connection with a registered program (with the same program ID), the connection takes place with the corresponding JCo server program.
http://help.sap.com/saphelp_nw04/helpdata/en/09/c88442a07b0e53e10000000a155106/content.htm
Hope this will clarify your doubts.
Regards
Suraj

Question about RFC 822

When I send mail with messenger express to [email protected],the attached *.doc file became AIMC362111431111.rfc822
Any question about messenger express ?
Thanks!

1 the version
root@jt-mail1 # ./imsimta version
Sun Java(tm) System Messaging Server 6.1 HotFix 0.02 (built Aug 25 2004)
libimta.so 6.1 HotFix 0.02 (built 17:36:06, Aug 25 2004)
SunOS jt-mail1 5.9 Generic_112233-11 sun4u sparc SUNW,Sun-Fire-880
root@jt-mail1 #
2 I send a mail with a attached file name 'test.doc' to [email protected],so I want to see this mail with attached file 'test.doc'.
But now I see the attached file became: AIMC362111431111.rfc822
That means 'test.doc' becames 'AIMC362111431111.rfc822' .
?

RFC Sender Adapter configuration - Program ID question

Hello All,
I am working on a Sync RFC(R/3) --> XI --> Webservice scenario. I have a question on Program ID's. We're going to be having different RFC's call the same webservice. In that case, we'll have one scenario for each RFC sender.
Do we need to create different TCP/IP ports and Program ID's in R/3 for each RFC sender or just one TCP/IP port and Program ID can be used by all RFC's from R/3?
Please respond with your suggestions.
Thanks in advance.
Karthik

Aamir,
Buddy please correct me if i'm wrong!! As u said u will design this as single scenario with conditional receiver determination, Wht happen if I create RFC channel under some other Business Service with same Program ID. In this case my receiver is different isn't it!!!
The key is Outbound Interface .. If the RFC sends BAPI_GET_DETAIL with say ProgramID TEST_1000 the corresponding interface in XI will be triggered, similarly if the RFC sends RFC_READ_TABLE with same program ID TEST_1000 the corresponding interface will be triggered?
Is the above example make sense, please correct me if my understanding is wrong.
raj.

RFC sender adapter question

Hi Experts,
if we take RFC as sender adapter for communication. from PI aspect, the trigger mechanism is pull or push?
in sender RFC configuration, we need to specify Application Server (Gateway), Application Server Service (Gateway), Program ID, Application Server, System Number and logon credentials. it is more like a pull mode, but i do not see any polling interval to be set, how does PI know when the data is ready?
if the data is pushed from RFC sender system to PI, then there is no need to use a sender RFC channel as in SAP server the destination (PI) information of the RFC is already configured.
Does someone can answer my query? Thanks in advance.
Best Regards,

Hi Aditya,
in sender RFC configuration, we need to specify Application Server (Gateway), Application Server Service (Gateway), Program ID, Application Server, System Number and logon credentials. it is more like a pull mode, but i do not see any polling interval to be set, how does PI know when the data is ready?
You would need to create a program that would trigger the Function Module and use the TCP/IP RFC destination you have configured in SM59.
if the data is pushed from RFC sender system to PI, then there is no need to use a sender RFC channel as in SAP server the destination (PI) information of the RFC is already configured.
The RFC adapter lies in the Java stack, that is why you would still need to configure the sender channel RFC in PI. Otherwise the connection will not work.
Hope this helps,
Mark

Help with RFC sender, Program And RFC Destination

Hi!!
my scenary is asynchronous
     RFC Sender -> SAP-XI -> Oracle reciever
I have a problem with abap, especially rfc, program and rfc destination. The connection with SAP-XI exist and SAP-XI receive the message but the message is empty.
1. In my program on the line
          CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
          catch an error system_failure = 2 and it dont execute the rfc ZBAPI_SD_PED_ORD_SERVIC
2. I rewrite my program, that line to
          CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' STARTING NEW TASK 'NEW' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
          catch an error communication_failure = 1 but the rfc ZBAPI_SD_PED_ORD_SERVIC is executed but no send to SAP-XI
3. I rewrite my program, that line to
          CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' IN BACKGROUND TASK DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
          No error but it dont execute the rfc ZBAPI_SD_PED_ORD_SERVIC and the message in SAP-XI is empty, display the tables but not the row. i check the table PED_ORDEN and RETURN but the controls fields dont are afected.
What is my Error?
Where am i making a mistake?
RFC
FUNCTION zbapi_sd_ped_ord_servic.
*"Interfase local
*" TABLES
*"      PED_ORDEN STRUCTURE ZSD_RFC_T04
*"      RETURN STRUCTURE ZSD_RFC_R06
TABLES: zsd_ped_orden, zsd_rfc_r01.
DATA: tb_ped_orden LIKE zsd_ped_orden OCCURS 0 WITH HEADER LINE,
               tb_rfc_orden_error LIKE zsd_rfc_r01 OCCURS 0 WITH HEADER LINE.
*Get Pedido by Ordenes
SELECT * INTO CORRESPONDING FIELDS OF TABLE tb_ped_orden
          FROM zsd_ped_orden
          WHERE estatus EQ space.
LOOP AT tb_ped_orden.
    MOVE-CORRESPONDING tb_ped_orden TO ped_orden.
    APPEND ped_orden.
    tb_ped_orden-estatus = 'X'.
    tb_ped_orden-fecha_actualiz = sy-datum.
    tb_ped_orden-hora_actualiz = sy-uzeit.
    MODIFY tb_ped_orden.
ENDLOOP.
MODIFY zsd_ped_orden FROM TABLE tb_ped_orden.
COMMIT WORK.
*Errors in Ordenes
SELECT * INTO CORRESPONDING FIELDS OF TABLE tb_rfc_orden_error
          FROM zsd_rfc_r01
          WHERE estatus EQ space.
LOOP AT tb_rfc_orden_error.
    MOVE-CORRESPONDING tb_rfc_orden_error TO return.
    APPEND return.
    tb_rfc_orden_error-estatus = 'X'.
    tb_rfc_orden_error-fecha_actualiz = sy-datum.
    tb_rfc_orden_error-hora_actualiz = sy-uzeit.
    MODIFY tb_rfc_orden_error.
ENDLOOP.
MODIFY zsd_rfc_r01 FROM TABLE tb_rfc_orden_error.
COMMIT WORK.
ENDFUNCTION.
PROGRAM
REPORT ZBAPI_SD_PED_ORD_SERVIC.
DATA: ped_orden LIKE ZSD_RFC_T04 OCCURS 0 WITH HEADER LINE,
      return LIKE ZSD_RFC_R06 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
     TABLES
          ped_orden             = ped_orden
          return                = return
EXCEPTIONS
    communication_failure = 1
    system_failure        = 2
    OTHERS                = 3.
IF sy-subrc <> 0.
MESSAGE 'error' type 'I'.
ENDIF.
COMMIT WORK.
RFC DESTINATION
RFC Destination: ZXI_ENVIAR_PED_ORD_SERVIC
Connection TYpe: TCP/IP Connection
Register Server Program: ZBAPI_SD_PED_ORD_SERVIC
Gateway host: host00
Gateway service: sapgw00

hi
For rfc sender adapter we hv to do some settings .Please chk whether this settings are well configured or not.
a) RFC destination
b) RFC channel in the XI directory
This weblog is a response to a few question about the basic configuration of the RFC sender adapter
that were posted on the XI forum (and also on my e-mail)
So here we go, basically we have to configure 2 things:
a) RFC destination
b) RFC channel in the XI directory
RFC destination:
1. To create the RFC go to TCODE: SM59
2. Create new destination of type T (TCP/IP)
3. Make sure you select Registered Server Program option before writing your program ID
4. Write you program ID (remember it's case-sensitive)
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server)
7. No configuration in the J2EE administrator nessecary
Now we can proceed to RFC channel configuration:
1. Enter your Application Server
2. Your Application Server Service
3. Enter your Program ID from the RFC destination
And we're done:)
Now you can test the RFC destination in SM59 to see if it works.
Please chk this following link.
1. RFC Processing with the RFC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/25/76cd3bae738826e10000000a11402f/content.htm
2. Configuring the Sender RFC Adapter -
http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm
3. /people/swaroopa.vishwanath/blog/2006/12/28/send-rfc-to-sap-xi-150-asynchronous
regards
Manas

RFC sender error

Hi,
I created RFC at SAP . RFC Sender.
SM59 registered progam ID
i am suing same program id and gateway server, host in XI
when i execute the FM from se37 using the RFC DEST it is showing the error
"JCO.Server could not find server function 'Z_BANK_RECONCILIATION'"
same program id has been defined in Visual admin JCO Serivce.
Could u locate where is the errore
jeff

hi Jeff,
>>>>Same program id i registered in JCORFC server in Visual admin.
what for ??
why didn't you follow my blog that I gave you in
which I show RFC configuration ? I don't mention anything
about Visual admin in it...
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

RFC Sender

Hi all,
Hi have defined a RFC Sender scenario. I think all in Design and Configuration time is OK.
But I can't define the TCP-IP destination in SM59...What's about Program ID in definition of destination? How I register the Program ID?
Thanks in advance,
Regards.

hi,
>>>The commit work must go after de call function, isn't it?
yes
>>>>Another silly question: the rfc must exits in XI server?
only in the repository - you import it into the repository
>>>>No XML traffic in SXMB_MONI, no file written...
check TCODE - SM58 on the r/3 if there are any errors over there
BTW
is the RFC connection to XI working in SM59?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Questions about using the Voice Memos app

I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
-Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
-When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
-In your opinion, how is the recording quality of the voice memos app?

You cannot import your Android voice memos to your iPhone's voice memo app. You might be able to play the Android memos and have the iPhone pick up the audio and record it.
Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
App quality is excellent.

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

Just installed iOS6, questions about "iMessage" and other things...

I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

A lot of questions about my MacBook Air

I am really new to re-using Apple computers.The last time I used an Apple computer was back in 1987 when the school and my family had Apple IIGS computers. I have been using PC's which reqiure Microsoft. I a lot of have questions (10 questions) about my MacBook Air and I hope you good people can and will help me.
Product: MacBook Air
Operating System: Mac OS X Version 10.7.4
1) I Downloaded MacKeeper because I was fooled. I had a bad feeling just before I Downloaded it and I should have listened to my heart. However, I didn't buy it or fully Install it. It was like a test run and then they wanted me to pay almost $100 for it. Thankfully, I didn't because I read it is Malware. I spoke with an Apple Tech at Apple Care and he helped me get rid of it (or so we think). I don't see it anymore on my computer. I read it can slow down your computer. How can you tell if it's really off of the computer?
2) When I open "Finder" and I see that there are people Sharing my computer with me. I went into AirDrop and it reads, "Other people can see your Mac as (my name) MacBook Air when their computer is nearby." I bought a HotSpot and while it's turned on and I selected it as my WI-FI connection I thought it would get rid of these people, protect what I type, me, my items, computer, etc. But it didn't.
I didn't know that I have to buy a exteral CD and/or DVD Player in order to connect to the brand new Modem and Router in one by NetGear. I am so used to PCs and the CD/DVD Players being built inside.
The people at Apple Store told me that there is an internal modem inside, but I don't know how to find it and what to do then. Should I use a Firewall?, An AntiVirus, AntiMalware, AntiSpyware, etc. Apple Care tech told me I don't need to get an AntiVirus.
3) Is there a new kind of Wireless Modem and Router that doesn't require a CD-ROM?
4) When I travel or fly and I am not close to home I was told by Best Buy and Sprint that I had to buy a mobile HotSpot to use the computer (WI-FI) safely. As I typed, I have one. But it's pretty expensive and only gives me 1 hour and 15 minutes per day to Stream. What can I do to use this computer safely Online when I am out of range from a Modem and Router? What do people do when they travel on airplanes?
5) This compter won't let me use "Raid." I think you have to have a newer version. I hard about Raid on the radio from Leo (can't recall his last name) who's a Tech expert.
6) Should I buy a ZipDrive? Apple Store Tech told me that I didn't need a ZipDrive. I just remember the episode of HBO's "Sex and The City" when Carrie looses everything because her copy crashed. Now, of course, I know that's a fictional show, but with PC's and Microsoft I have lost everything when it crashed, frooze up, etc. I know there's iClouds. I heard about Carbonite, but I have read the Pros and Cons about it. Mostly they are Cons about it. I just don't want to do anything wrong and mess up this computer.
7) Should I buy a new Printer/Copier/Scanner because mine is an HP. It's not new, but it works. I even have a CD-ROM for Macs. What about the new product called, "Neat"?
8) Is there a special product that I should buy to do Online Banking and/or other important stuff?
9) I saw and read about iWork in the Apps Store and it sounds cool. I still have alot of friends and colleagues who still use Microsoft. Is iWork good to use? Should I Download it from the Apple Apps Store or can a buy it at Apple? Is there another Word Processing Program that is great and user friendly and will work with Macs and PCs?
10) Should I Update the OS with OS X Mountian Lion Pro from the Apple Apps Store or buy it at Apple Store?
In advance, I wish to thank you in this Apple Support Communites for your help. Have a safe and happy holiday weekend!

1) Here are instructions for removing MacKeeper. Since it mostly consists of manually looking for folders and specific files, if you follow the instructions you either fail to find what you are told to find (because your AppleCare guide gave you complete instructions which you followed) or you'll find some additional files that need to be replaced.
2 & 3) I assume you are looking at the sidebar of a Finder window and seeing Shared and computers under it. Those are computers that you can potentionally share. To do so you'd need an account on their computer and a password. They are not sharing your computer.
AirDrop allows you to create an adhoc network for filesharing and it only functions when you have selected the AirDop item in the SideBar. Actually doing that merely announces to computers in the same network node that your computer is available for a file to be sent to. Even then you have to explicitly allow the file to be downloaded to your computer. Similarly you'd be able to see other computers with AirDrop selected and be able to send them a file - which they'd have to accept.
The only reason your NetGear Router comes with a CD is to install and run their 'easy' step by step configuration program. It can also be done manually with a browser. Read the manual to find the IP address you must enter to access the router's configuration menu. Apple's WiFi routers don't require a CD to install the software because the configuration software is already on your computer.
I do have my firewall turned on. AntiVirus software isn't a bad idea - I use Sophos having tested it for a review for our local User Group and I found I liked it better than ClamAVx which is what I'd been using before. Both are free.
4) I think you were scammed by Sprint and BestBuy. I use hotel, coffee shop, and restaurant WiFi spots and have for years. However, because they can be unsecured, I do not shop online or bank when I'm using them. I also use 1Password and don't reuse passwords so even if a sniffer should grab an account and password that's all it would get - one account.
5) Raid doesn't really make sense with a MacBook Air - a RAID involves 2 or more disks being used as if they were one.
6) Zip drive? No. External hard drive - yes. It isn't a question of if a computer's hard drive will malfunction, it is when. OWC has a nice selection of external drives and the Mac has a built in backup system called TimeMachine. Due to the way TimeMachine works, I've found that your TimeMachine drive should be at least twice as large - and preferably 3-4 times as large as the data you are backing up.
7) if your printer works and it has Mountain Lion drivers, why replace it?
8) Online banking is done with a browser - Use Safari or FireFox
9) If trading files with Windows users is important Mac: Office is your best bet. If not, iWork, Mac:Office, or LibreOffice are all good possibilities.
10) you can only buy Mt Lion via the App Store.

Follow-up question about forms and SharePoint Online

I asked a question about life after InfoPath earlier, and got a good answer:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fb23b3d9-8a09-4267-aab5-09929f6a3082/life-after-infopath-seeking-advice
After looking at all of the limitations of SharePoint Online, I'm wondering how developers are dealing with the limitations. Lets say you are asked to develop something that has complex logic, including fetching data from external web services, dynamically
displaying parts of a process to people depending on role, and ending up with a printable document. In our on-premises environment, InfoPath is well suited to this task, with some code behind for some things. Or, if not using InfoPath, we would use application
pages and workflow.
Neither of those are available in SharePoint Online, so what would you do?

Some things, such as the conditional display of content, can be done via JavaScript. More advanced items, such as integrating external web services would likely require a SharePoint "app". A SharePoint app is essentially a link to a separate site
that is running an asp.net web app (or PHP, or whatever). This asp.net site can do anything it needs with any web services, or conditional formatting, or anything. Because it's registered as a SharePoint app, it can also call back into the SharePoint site
and work with data. So, a SharePoint App could present the user with a robust form that simply sends the data back to a SharePoint list. The SharePoint app can also be surfaced on the SharePoint site itself in an iframe, so the user won't know that the form
is hosted by another server.
By the way, the ideas behind the app model permeate the entire SharePoint environment: instead of having the SharePoint server itself run all kinds of custom business logic, that workload is handled by other servers, so the SharePoint servers can be focused
on running the core bits of SharePoint. InfoPath puts a large load on the servers, so it's out. XSLT list views also put a load on the server, so they're also out. SSRS is an amazingly fantastic tool, but is not supported in the cloud (and there's no
alternative). Timer jobs, event handlers, workflow, and many other things have been re-architected to take the load off the SharePoint servers.
Mike G.

Ask for security question but they send the email to my other second account ! Not the same email which i logon it

I had a weird problem i have two id apple account one of them i forget the security question i try to ask for reset but when i login to first email and ask for reset they send the email to other email which is in other account !! I need it to send to the same email which i login through it i do not know how they know the other email is my second email
Now i can not reset my security question because they send it to other email which has been hacked !!

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

Question about Kurts comments discussing the seperation of AIA & CDP - Test Lab Guide: Deploying an AD CS Two-Tier PKI Hierarchy - Kurt L Hudson MSFT

Question about the sentence in bold. What is the meaning behind this comment?
How would you separate the role of the AIA and CDP from a CA subordinate server? I can see where I add a CES and CEP server which has those as well, but I don't completely understand his comment. Because in this second step, (http://technet.microsoft.com/en-us/library/tlg-key-based-renewal.aspx)
he shows how to implement CES and CEP.
This is from the guide located at: http://technet.microsoft.com/library/hh831348.aspx
Step 3: Configure APP1 to distribute certificates and CRLs
In the extensions of the root CA, it was stated that the CRL from the root CA would be available via http://www.contoso.com/pki. Currently, there is not a PKI virtual directory on APP1, so one must be created.
In a production environment, you would typically separate the issuing CA role from the role of hosting the AIA and CDP.
However, this lab combines both in order to reduce the number of resources needed to complete the lab.
Thanks,
James

My concern is, they have a 2-3k base of xp systems, over this year they are migrating them to Windows 7. During this time they will also be upgrading hardware for the existing windows 7 machines. The turnover of certificates are going to be high, which
from what I've read here, it worries me.
http://blogs.technet.com/b/askds/archive/2009/06/24/implementing-an-ocsp-responder-part-i-introducing-ocsp.aspx
The application then can go to those locations to download the CRL. There are, however, some potential issues with this scenario. CRLs over time can get rather large
depending on the number of certificates issued and revoked. If CRLs grow to a large size, and many clients have to download CRLs, this can have a negative impact on network performance. More importantly, by
default Windows clients will timeout after 15 seconds while trying to download a CRL. Additionally,
CRLs have information about every currently valid certificate that has been revoked, which is an excessive amount of data given the fact that an application may only need the revocation status for a few certificates. So,
aside from downloading the CRL, the application or the OS has to parse the CRL and find a match for the serial number of the certificate that has been revoked.
With the above limitations, which mostly revolve around scalability, it is clear that there are some drawbacks to using CRLs. Hence, the introduction of Online Certificate
Status Protocol (OCSP). OCSP reduces the overhead associated with CRLs. There are server/client components to OCSP: The OCSP responder, which is the server component, and the OCSP Client. The OCSP Responder accepts status
requests from OCSP Clients. When the OCSP Responder receives the request from the client it then needs to determine the status of the certificate using the serial number presented by the client. First the OCSP Responder determines if it has any cached responses
for the same request. If it does, it can then send that response to the client. If there is no cached response, the OCSP Responder then checks to see if it has the CRL issued by the CA cached locally on the OCSP. If it does, it can check the revocation status
locally, and send a response to the client stating whether the certificate is valid or revoked. The response is signed by the OCSP Signing Certificate that is selected during installation. If the OCSP does not have the CRL cached locally, the OCSP Responder
can retrieve the CRL from the CDP locations listed in the certificate. The OCSP Responder then can parse the CRL to determine the revocation status, and send the appropriate response to the client.

Question about rfc sender

Similar Messages

Maybe you are looking for