Question about role query
Hi all,
I have created a rolequery and i made it as PUBLIC.
But when i go to fieldmapping and then selected the rolename radio button and when i tried to see the list in drop down box, i could not see my rolequery.
Did i miss anything?
Let me know if you do not understand the question.
Please help me.
Thank you.
Hi,
In order to be able to select the rolequery in the dropdownlist, you have to create a new role. Preferably you copy an existing role, based on another existing rolwquery and name it like your rolequery.
When the role is created, add your role query to the role on the workflow routing page of the role. When this is done the role query will appear in the drop down list.
Kind regards,
Joris Verdonschot
Similar Messages
-
Some question about the query designer
hello, dear all,
I am a new comer of here, and I am intersting in BI, but I have no basic knowledge about it.
so I just want someone could give me some advice about it.
our boss need I do the developer about the query designer, I just have searched in this forum. but nothing founded for I am a new comer here,
I heard there are some training document of the query designer, could someone give me the URL, thanks.Hi,
Query desinger is used to develop a Query, Query can be created on following data targets
-Info Cube
-DSO
Virtual data target
-MultiCube
-Infoset
-Multiprovider
We have 5 section in query designer
- Infoprovider : where we select the data target , on which report to be created
-Filter : to restrict value at infoprovider level ( if you want data for year 2008, for example)
-Free Characterstic : this allow you to drill down
-Columns : char/keyfigs to be display in columns can be added here
Row: key/char to be display in Rows can be added here
gv me ur mailid i will let u have Bex manual,
I would suggest , if you have any IDES ( training ) system , where you can log in and then go to RRMX,
and try to create new query and add any data target ( which is already created ) and then drag and drop the char/key fig to the required section ,
save it and execute it .....
if you play arround and see the output , that would help u to understand how to work with query designer.
Hope this helps
Sukhi
Edited by: Sukhvidner Singh on Nov 4, 2009 5:36 PM -
Question about the Query Optimizer
For an Excercise during my database lecture the following table
CREATE TABLE TASKS
"ID" NUMBER NOT NULL ENABLE,
"START_DATE" DATE,
"END_DATE" DATE,
"DESCRIPTION" VARCHAR2(50 BYTE)
) ;with about 1.5 Million Entries were given. In addition there was the following Query:
SELECT START_DATE, COUNT(START_DATE) FROM TASKS
GROUP BY START_DATE
ORDER BY START_DATE;And the Index:
create index blub on Tasks (start_date asc);The main excercise was to speed up queries with indexes. Because all data is accessed the optimizer ignores the index and just did a full table scan.
Here the QEP:
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 9343 | 74744 | 3423 (6)| 00:00:42 |
| 1 | SORT GROUP BY | | 9343 | 74744 | 3423 (6)| 00:00:42 |
| 2 | TABLE ACCESS FULL| TASKS | 1981K| 15M| 3276 (2)| 00:00:40 |
----------------------------------------------------------------------------Then we tried to force him to do the index with this query:
ALTER SESSION SET OPTIMIZER_MODE = FIRST_ROWS_1;
SELECT /* + INDEX (TASKS BLUB) */ START_DATE, COUNT(START_DATE) FROM TASKS
GROUP BY START_DATE
ORDER BY START_DATE;but again it ignored the index. The optimizer guide states clearly, that each time you access all data from a table it has to do a full scan.
So we tricked him in doing a fast index scan with this query:
create or replace function bla
return date deterministic is
ret date;
begin
select MIN(start_date) into ret from Tasks;
return ret;
end bla;
ALTER SESSION SET OPTIMIZER_MODE = FIRST_ROWS_1;
SELECT /* + INDEX (TASKS BLUB) */ START_DATE, COUNT(START_DATE) FROM TASKS
where start_date >= bla
GROUP BY START_DATE
ORDER BY START_DATE; now we got the following QEP:
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 8 | 3 (0)| 00:00:01 |
| 1 | SORT GROUP BY NOSORT| | 1 | 8 | 3 (0)| 00:00:01 |
|* 2 | INDEX RANGE SCAN | BLUB | 1 | 8 | 3 (0)| 00:00:01 |
----------------------------------------------------------------------------- So it do use the index.
Now to my two questions:
1. Why should it always do a full scan (because the optimizer documentation answer is a little bit unsatisfying)?
2. After looking at the difference between the costs (FS: 3276 IR: 3) and the time the system needs (FS: 9,6 sec IR: 4,45) why does the optimizer refuse the clearly better plan?
Thanks in advance,
Kai Gödde
Edited by: Kai Gödde on May 30, 2011 6:54 PM
Edited by: Kai Gödde on May 30, 2011 6:56 PMJohn Spencer mentioned already the most important point (the role of NULL values) but here are some minor additions:
* with the additional NOT NULL condition Oracle will do an INDEX FAST FULL SCAN (a multiblock scan of the index segment, similar to a FULL TABLE SCAN)
* with the additional NOT NULL condition you don't need a hint and Oracle will choose the IFFS access
* if the index was a bitmap index you would not need a NOT NULL condition because Oracle stores NULL-values in bitmap indexes (but you should not define bitmap indexes in an OLTP system because they bring massive locking issues)
* if the index would contain a second value the additional NOT NULL condition would also be needless
CREATE TABLE TASKS
"ID" NUMBER NOT NULL ENABLE,
"START_DATE" DATE,
"END_DATE" DATE,
"DESCRIPTION" VARCHAR2(50 BYTE)
insert into tasks
select rownum
, case when mod(rownum, 5) = 0 then null else sysdate - round(rownum/100) end
, case when mod(rownum, 4) = 0 then null else sysdate - round(rownum/50) end
, lpad('*', 50 , '*')
from dual
connect by level <= 1500000;
exec dbms_stats.gather_table_stats(user, 'TASKS')
-- the IFFS access without a hint:
create index blub on Tasks (start_date);
SELECT START_DATE
, COUNT(START_DATE)
FROM TASKS
WHERE START_DATE IS NOT NULL
GROUP BY START_DATE
ORDER BY START_DATE;
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 15001 | 102K| 1871 (16)| 00:00:10 |
| 1 | SORT GROUP BY | | 15001 | 102K| 1871 (16)| 00:00:10 |
|* 2 | INDEX FAST FULL SCAN| BLUB | 1200K| 8203K| 1631 (3)| 00:00:09 |
Statistiken
0 recursive calls
0 db block gets
3198 consistent gets
0 physical reads
0 redo size
378627 bytes sent via SQL*Net to client
11520 bytes received via SQL*Net from client
1002 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
15001 rows processed
-- the bitmap index
create bitmap index blub on tasks(START_DATE);
SELECT START_DATE
, COUNT(START_DATE)
FROM TASKS
GROUP BY START_DATE
ORDER BY START_DATE
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 15001 | 102K| 132 (1)| 00:00:01 |
| 1 | SORT GROUP BY NOSORT | | 15001 | 102K| 132 (1)| 00:00:01 |
| 2 | BITMAP CONVERSION TO ROWIDS| | 1500K| 10M| 132 (1)| 00:00:01 |
| 3 | BITMAP INDEX FULL SCAN | BLUB | | | | |
Statistiken
1 recursive calls
0 db block gets
1126 consistent gets
0 physical reads
0 redo size
378682 bytes sent via SQL*Net to client
11520 bytes received via SQL*Net from client
1002 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
15002 rows processed
-- the composite index
create index blub on tasks(START_DATE, 0);
SELECT START_DATE
, COUNT(START_DATE)
FROM TASKS
GROUP BY START_DATE
ORDER BY START_DATE;
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 15001 | 102K| 2400 (15)| 00:00:12 |
| 1 | SORT GROUP BY | | 15001 | 102K| 2400 (15)| 00:00:12 |
| 2 | INDEX FAST FULL SCAN| BLUB | 1500K| 10M| 2095 (3)| 00:00:11 |
Statistiken
0 recursive calls
0 db block gets
4120 consistent gets
0 physical reads
0 redo size
378682 bytes sent via SQL*Net to client
11520 bytes received via SQL*Net from client
1002 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
15002 rows processedRegards
Martin Preiss -
Hi all ,
I have small question related to bad query .
what is the affecting happens to database if there is lot of bad query , i know the performance issue is there what's other things .like archive log generated database time , IO , TMP tablespace , please give me information about it's .
thanks & regards.user11969912 wrote:
I have small question related to bad query . What do you consider a bad query? A bad query can be the result of poorly written and illogical SQL. It can be due to not using bind variables. It can be due to a on-optimal execution plan generated by the CBO. It can be due to poorly designed code that uses what seems to be a "good query", badly and in the wrong way (using bulk collection when a native SQL alone suffices, or hitting the very same data multiple times, etc).
what is the affecting happens to database if there is lot of bad query Each of these have a different impact on the database. A "bad query" can cause a snapshot-too-old error. A deadlock error. A shared pool memory allocation error. Can cause no error and simple increase I/O. Or increase CPU. Etc.
It is a lot more complex than what you seem to think, given your question. -
Hello Expert,
I'm a beginner in BW. Now I'm trying to generate Demo Content for InfoCube SAP DemoCube(0D_DECU) and use it in query.
But I'm blocked by installing role SAP_BWC_0D_SAPDEMO (I got the role from the data flow network of the InfoCube).
I can find Role SAP_BWC_0D_SAPDEMO in the Medadata Repository->Activated Objects->Role, but canu2019t find it in BI Content->Role
Since the role SAP_BWC_0D_SAPDEMO is not available in BI Content->Role, I'm not able to install it.
Can any expert help me on how to make the role available in BI Content->Role
Thanks & Best Regards, Johnney.Hi,
Check, the sap help..
http://help.sap.com/saphelp_nw70/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/frameset.htm
Thanks
Reddy -
Question about Resultant Query
Documentary Table
Doc_No Title Ranking YearReleased
1 Hoop Dreams A 1994
2 The Thin Blue Line B 2000
3 Surprise Me A 2004
4 Trouble the Water C 2008
5 Dark Days B 2000
6 Paris of Burning B 1991
7 Man on Wire A 2008
Please tell What will be the resultant relation that will be produced by the following SQL SELECT statement.
Query:
SELECT Doc_No, Title, YearReleased
FROM
Documentary
WHERE YearReleased <>‘2000’;
Please replyGhulam Yassen wrote:
I am asking about the relation after its output.
SELECT Doc_No, Title, YearReleased
FROM
Documentary
WHERE YearReleased ‘2000’;What do you mean with relation?
If you mean the output here you are:
WITH documentary AS
SELECT 1 Doc_no, 'Hoop Dreams' Title, 'A' Ranking, 1994 YearReleased FROM DUAL UNION
SELECT 2 Doc_no, 'The Thin Blue Line' Title, 'B' Ranking, 2000 YearReleased FROM DUAL UNION
SELECT 3 Doc_no, 'Surprise Me' Title, 'A' Ranking, 2004 YearReleased FROM DUAL UNION
SELECT 4 Doc_no, 'Trouble the Water' Title, 'C' Ranking, 2008 YearReleased FROM DUAL UNION
SELECT 5 Doc_no, 'Dark Days' Title, 'B' Ranking, 2000 YearReleased FROM DUAL UNION
SELECT 6 Doc_no, 'Paris of Burning' Title, 'B' Ranking, 1991 YearReleased FROM DUAL UNION
SELECT 7 Doc_no, 'Man on Wire' Title, 'A' Ranking, 2008 YearReleased FROM DUAL
SELECT doc_no, title, yearreleased
FROM documentary
WHERE yearreleased {noformat}<{noformat}{noformat}>{noformat} '2000';
DOC_NO TITLE YEARRELEASED
1 Hoop Dreams 1994
3 Surprise Me 2004
4 Trouble the Water 2008
6 Paris of Burning 1991
7 Man on Wire 2008
{code}
Regards.
Al
Edited by: Alberto Faenza on Jun 7, 2012 12:54 PM
Modified to show lt and gt signs -
Question about different query results with wildcard
Hi, I'm working with a third party app on SQL Server 2000, and from what I can gather, programmed in C# & VisualFoxPro.
When we search with
Note contains 94949
we get 571 results, when we search with
Note contains 94949*
we get 575 results.
There should be at least a hundred different entries that start with "94949-1" so I expected the query with the wildcard to return something like 680 results, not an additional four rows.
Searching with
Note contains 94949-1*
got 483 results
Note contains 94949-10*
got 0 results
Could someone explain or point me to more documentation on the difference results we get?
ThanksHi Arnie, thanks for your response.
My situation is more basic than what appears in your example. Unfortunately, I am working solely through this application so I do not have access to the SQL to test out what you supplied, so my question is more of a need for an explanation of the search results. I do find lots of references to LIKE, Wildcards and pattern matching, but I don't find a way to explain to the users the best and most complete way to search. They mostly need a "this will always get us the results without missing anything" search technique and then to be able to select from a smaller group. I guess I need a basic course in understanding search results: how to get different ones and what they mean.
Using
Note contains 94949-'%'
returned one more result than when using an asterisk. I don't understand this difference.
Note contains 94949-'%1' or
Note contains 94949-'1%'
brings nothing nor does not using quotes. But there are hundreds of records which have the string starting with 94949-1 and a varying number of characters after that.
?Does the dash read not as a character in the string but as an expression?
When I use WITHIN 3 characters, I get too few results (eight). If I use AND, I get text unrelated to the account number I am looking for.
Again when I tried to narrow the search by adding one digit to the string to be matched, I did not get any results, but 500 results from the more general search is too much to scan by opening individual records.
Thanks for pondering this with me. -
Question about WebLogic query syntax
Hello,
I am using WebLogic Server 6.0, which came as part of the WebGain
Studio SE 4.5 development kit. My question regards the Web Logic query
syntax, which I have not yet mastered.
I am trying to create a finder method that takes a single argument
of type "char" and finds all matching fields of the column "keyword" in
which the argument is the first letter of keyword. That is, if I were
only looking for fields beginning with the letter "M", I'd use:
(like keyword 'M%')
However, I'm looking for all fields beginning with the first letter
defined by the first argument. Sadly, this syntax:
(like keyword '$0%')
doesn't seem to be working. Any suggestions on the correct syntax?
If this is not the right forum for this question, could someone
suggest an appropriate newsgroup?
Thanks, Dave962466 wrote:
Hi all,
I have an issue I need help with. I have created a script for an automated partition create on a monthly basis. It creates a monthly partition containing all dates within the respective month. The script is essentially this:
ALTER TABLE SCHEMA.TABLE
ADD PARTITION &&1
VALUES LESS THAN (to_number(to_char(to_date('&&2', 'DD-MON-YY'), 'YYYYMMDD')))
TABLESPACE LARGE_DATA94 COMPRESS;
I continually get this error message "ORA-14019: partition bound element must be one of: string, datetime or interval literal, number, or MAXVALUE"
The variable &&2 is passing in character data for the first of the month (E.G. '01-SEP-12'). &&1 passes character data for the month in MONYY (AUG12) I can run this query:
select
(to_number(to_char(to_date('&&2', 'DD-MON-YY'), 'YYYYMMDD')))
from dual;
With the output of 20120801. I cannot understand why I am able to run this partition create statement by hardcoding 20120901 but passing it in as a variable I receive the error. Note that I am not having problems with the &&1 variable. If anyone has any ideas please let me know. Thanks!I don't understand why you are taking a string, converting it to a date, then converting the date BACK TO a string ... then trying to convert that string to a number.
What is the data type of the partitioning key? It appears that it is a NUMBER, but actually represents a DATE. If so, that is a fundamentally flawed design. -
Question about select query.
Hi,
i want to insert the result of query to a table,
all the fields are corresponding except one field.
is there a way to this or i need to do
insert ( f1 , f2 ....)
i did this way
INTO CORRESPONDING FIELDS OF TABLE It_Return_Date
but i have another field which i want to insert to table.
is it possible??
10Xlets say you are getting values from a table
select & into X_TAB1 from TAB1.
data : x_tab2 type table2.
x_tab2-newfield = 'new value'. "Populate that new field value
move corresponding X_TAB1 TO X_TAB2. "all other will copy here
then use X_TAB2 to insert to your TABLE2.
INSERT TABLE2 FROM X_TAB2.
it would be a good practice to use same structure of the table while you use Insert/modify etc.. commands.
else you can declare TABLES ZTABLE2.
MOVE CORRESPONDING ZTABLE1 TO ZTABLE2.
ZTABLE2-NEW_FIELD = <NEW VALUE>.
then use INSERT.
INSERT ZTABLE2.
Regards
srikanth
Message was edited by: Srikanth Kidambi -
Question about infoset query with code
Hi experts.
I always appreciate your help. Today, I have some problem. I made infoset query using SQ01 and got some data. Those data include WBS no but some of them didn't. So I tried to put some code into the infoset query that any data has not WBS has some value, for example 'X', in WBS no field.
I needed to know what field or table I should control to display value 'X' in WBS no field in case that WBS field has no value.
I tried to put code at "END-OF-SELECTION(before display)" and control %dtab. But I met error message there is no such table %dtab. So, I define %dtab then during runtime, I also met error message %dtab has already been defiend.
How can I do? Is it impossible thing?? I'm wating for your answer.
regards.Hi, if you just want to fill the field if it is blank, you can do this in the Record Processing Section.
I'm not familar with the WBS number, so for this example, I will fill the BISMT in MARA during the "Recording Processing" Section.
if mara-bismt is initial.
mara-bismt = 'X'.
endif.
Regards,
Rich Heilman -
Question about caml query with UserID/ parameter (working outside of sharepoint )
I have to develop a custom view. I should take the current user and query it in List1 to obtain owned group names. Then I am supposed to query each group name in a List2 to obtain corresponding users. And In a new custom list view I should display those users..
Let's assume I'm working in a c# class in VS. Below is my initial code to fetche owned groups by the current user.
SPQuery query = new SPQuery();
query.ViewFields = @"<FieldRef Name='Title'/>";
query.Query = @"<Where><Eq><FieldRef Name='Title' /><Value Type='Integer'><UserID/></Value></Eq></Where>";
SPList lstUsers = web.Lists["Users"];
SPListItemCollection userItems = lstUsers.GetItems(query);
foreach (SPListItem myitem in userItems)
{Response.Write(myitem["Title"].ToString());}
The "<UserID/>" parameter in caml query does not work outside...
query.Query = @"<Where><Eq><FieldRef Name='Title' /><Value Type='Integer'><UserID/></Value></Eq></Where>";
How can I obtained the current logged user from outside of sharepoint?
Should I write my code somewhere other then a seperate vs c# class?
I appreciate any idea and suggestions....If you are quering a User ID of UserField, you need to add LookupId='True'/ to FieldRef
<Eq>
<FieldRef Name=Owner' LookupId='True'/>
<Value Type='User' >2</Value>
</Eq>
Thanks, Rocky Fernandes -
Question about hirarchical query
Hi gurus!
I have a problem with a hirarchical query. I want to if its possible to query the informations shown in table a and table b in a hierarchical way.
Table a
<pre>
e_id e_num e_name
1 100 ABC
2 200 DEF
</pre>
Table b
<pre>
d_id d_num d_name e_id
1 300 ABC 1
2 400 DEF 1
3 500 GHI 2
4 600 JKL 2
</pre>
The rows should be displayed like this:
<pre>
e_id e_num e_name d_id d_num d_name
1 100 ABC
1 300 ABC
2 400 DEF
2 200 DEF
3 500 GHI
4 600 JKL
</pre>
Please tell me if this is possible.
I'm looking forward to your responses.
yours sincerely
Florian W.Another solution with model
select e_id1 , e_num1 , e_name1 ,d_id, d_num, d_name
from (SELECT a.e_id, e_num, e_name, d_id, d_num, d_name
FROM a, b
WHERE a.e_id = b.e_id)
model
partition by (e_id, e_num, e_name)
dimension by ( row_number()over(partition by e_id, e_num, e_name order by d_id) rn )
measures( e_id e_id1, e_num e_num1, e_name e_name1, d_id, d_num, d_name)
rules
upsert
iterate(100)
until (presentv(e_id1[iteration_number+2],1,0)=0)
(e_id1[0]=cv(e_id) ,
e_num1[0]=cv(e_num),
e_name1[0]=cv(e_name),
e_id1[rn>=1] =null,
e_num1[rn>=1]=null,
e_name1[rn>=1]=null)
order by e_id, rn
SQL> select e_id1, e_num1, e_name1,d_id, d_num, d_name
2 from (SELECT a.e_id, e_num, e_name, d_id, d_num, d_name
3 FROM a, b
4 WHERE a.e_id = b.e_id)
5 model
6 partition by (e_id, e_num, e_name)
7 dimension by ( row_number()over(partition by e_id, e_num, e_name order by d_id) rn )
8 measures( e_id e_id1, e_num e_num1, e_name e_name1, d_id, d_num, d_name)
9 rules
10 upsert
11 iterate(100)
12 until (presentv(e_id1[iteration_number+2],1,0)=0)
13 (e_id1[0]=cv(e_id) ,
14 e_num1[0]=cv(e_num),
15 e_name1[0]=cv(e_name),
16 e_id1[rn>=1] =null,
17 e_num1[rn>=1]=null,
18 e_name1[rn>=1]=null)
19 order by e_id, rn
20 /
E_ID1 E_NUM1 E_N D_ID D_NUM D_N
1 100 ABC
1 300 ABC
2 400 DEF
2 200 DEF
3 500 GHI
4 600 JKL
6 rows selected.
SQL> -
Hi,
I have a SQ01 query .. based on that query i have to call another query
ie : when my basic list gets diplayed .. after i click on it a detailed list should be displayed (this again is another SQ01 query)... is this possible through abap Query and if it is where am i supposed to code this
Thanks a lot in advanceHI
GOOD
GO THROUGH THIS LINK
http://www.ams.utoronto.ca/Asset353.aspx
THANKS
MRUTYUN -
Hi friends,
I have two tables countries ( countries_province varchar2(20) , en_province varchar2 (20))
- countries_province THE PRIMARY KEY.
The Other table Victims ( Victims_province varchar2(20) , ..... )
-Victims_province is a foreign key for countries_province column in counties table .
I want to show en_province in the following report, but I am getting: subquery retrieves more than one value:
select Victims_province,
(select c.en_province from countries c , victims v where c.countries_province = v.Victims_province) as "en_province",
FROM VICTIMS
I hope my question is clear ...
Regards,
FatehFateh,
You are trying to use a "scalar subquery" technique. Frank has shown you a JOIN technique, which I think is the best solution.
You may still want to know why your statement failed. First, if you run your subquery alone:select c.en_province from countries c , victims v where c.countries_province = v.Victims_provinceyou get every province that is in both tables. You don't want that list in every row, but your subquery is supposed to run once for every row.
Second, here is a scalar subquery that seems to work:select Victims_province,
(SELECT C.EN_PROVINCE FROM COUNTRIES C WHERE C.COUNTRIES_PROVINCE = V.VICTIMS_PROVINCE) AS "en_province"
FROM VICTIMS V;Now the subquery will run once per row, and each time it will look up a different province and return one result.
Again, this is not the best solution in this context. I just wanted to help you understand the "scalar subquery" technique. -
Currently running Oracle 8.1.7.3 on 32 CPU HP box. I'm doing some data analysis and ran in to some inconsistencies on what columns parallel query works on. For most columns it kicks off all the threads(ora_pxxx) but on a few of the columns, it will only run 1 thread. These queries run full table scans.
Example SQL:
Select /* parallel (column1, 10) */ column1
from table1
I can't seem to find much documentation on parallel queries.sorry. correction on the SQL format:
Select /*+ parallel(tb1, 20)*/ column1
from table1 tb1
Maybe you are looking for
-
I have to changed wrong maintain IT0000 & IT0001 far away from earliest retro active allowed in SAP. For Exampe : Earliest Retro is on January 2005 Data in IT0001 as below: 01/01/1980 - 12/31/1990 as Position A. Data should be changed as below: 01/01
-
REport on Monthwise period closed.
Hai SAP gurus Could u please help in getting the report on Mothwise period closed (ie., date on which the period have been closed for any entires) Though i tried through S_ALR_87003642 - Open and Close Posting Periods . I Could not get the exact da
-
Does Verizon Fios intend to compete with AT&T U-verse and upgrade the recording capability to include more than 2 shows at a time (and if so, when)? I often have to watch tv on one of the smaller televisions because I'm recording 2 shows on the main
-
Hi, We are using Oralce Obfuscation Kit to encrypt some of the information like password and Card Number. We need to encode the binary data and store it as a String in the DB.(One type of encoding is a Base 64 Encoding) I got a sample program from Or
-
Hi All, I have written some System.out.println() in my Java Embedding Activity. But theses messages are not appearing. Can anyone tell me where exactly these messages are posted ? Thanks, Ashutosh Singh