Question about sap license audit,could you help me
how many users can my test system use ? Does SAP concern the users I used in test system ?
could you give me some information about that? thanks a lot.
Hi,
We have hundreds of user on our production system, and several developer user and have been go live several years ago (SAP R/3) and proceed license audit annualy.
Typically, license audit is calculated by the number of user on your production system and the number of developer user on your (development) system. Hence, the number of usual user (which is not developer user) on your test system should not be brought into SAP license audit calculation.
to proceed, first you have to clasify contractual user type via SU01, and then proceed it using USMM transaction.
hope it help you,
rgds,
Alfonsus Guritno
Similar Messages
-
A question about SAP licensing
Hello:
I need a clarification about the SAP licensing. First, let me give you an introduction.
My company signed a license agreement in 1999 with SAP when buying SAP R/3 4.0B. Since then, and for cost reasons, there was not an agreement to migrate our licenses to the different schemas proposed by SAP along these years, i.e. mySAP or Business Suite. Currently, we are paying our annual maintenance since 1999.
We are in SAP 4.6C now and are we are forced to migrate to ECC6.0 because 4.6C will not be supported in 2011.
We are preparing the upgrade to ECC 6.0, but it seems that we should first "upgrade" our old licenses to Business Suite yes or yes, and pay for the difference; is that correct? So it means that our annual maintenace payment is not useful to upgrade SAP 4.6C to ECC 6.0 without cost?
Hope you can help me.
Thanks.Hi,
>So it means that our annual maintenace payment is not useful to upgrade SAP 4.6C to ECC 6.0 without cost?
We had exactly the same case when upgrading from R/3 4.7 to ECC6. We had to re negotiate all the prices to go from a R/3 license to a Netweaver license.
I even think this is the real reason of the name change to ECC (5 or 6) instead of R/3 5.0 !
"It's not a software upgrade; it is a change of software..."
Regards,
Olivier -
Question About SAP Basis Auditing
Hi Gurus,
I am a IT manager in our company. Our Basis has SAP_ALL authorization in our PRD circumstance. I
want to know how to audit his actions in PRD. Does anyone know any tool can do this?
BTW, I don't care the tool support by SAP-itself or third part.
Thanks in advance!
JasonHi Jason,
Try giving the date range, this will give you the report for the required time frame. In this way you have all the users which falls in actual 'Professional users' category.
Also try out T code USMM
Refer to this:
https://websmp108.sap-ag.de/licenseauditing
http://help.sap.com/saphelp_nw04/helpdata/en/84/41026810914c9d8603001a3d008f3b/content.htm
Hope this helps.
Regards,
Pranay -
License problem, Could you help me?
I have install a license to my ecc6 system using slicense.
but when I use saplicense command in AIX os, I get this message:
tsmtestserver:prdadm 8> saplicense -test pf=/sapmnt/PRD/profile/PRD_DVEBMGS00_tsmtestserver
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = PRD
Read message server host
ok, host = tsmtestserver
Read message server service port
ok, service port = sapmsPRD
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = R1067493288
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
no valid license found ***
tsmtestserver:prdadm 9> saplicense -show
saplicense: no license entries found
tsmtestserver:prdadm 10> saplicense -get
saplicense: HARDWARE KEY = R1067493288
why in OS, the system do not know the license I installed from GUI.
thanksHai,
Try this, saplicense -test pf=<Profile> TRACE=2. This will you locate the source of the problem.
http://help.sap.com/saphelp_nw04/helpdata/EN/a7/512caf407a11d1893b0000e8323c4f/frameset.htm
You should have made some typing error will installing the license, please check the following link for some useful SAP Notes.
http://help.sap.com/saphelp_nw04/helpdata/EN/67/4c8838c04b275de10000009b38f8cf/content.htm
Regards,
Yoganand.V -
I don't have a rescue email option and i want to reset the security questions , so what shall i do?? I have been trying to do so for about 2 weeks , please can you help???
You will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699
When they've been reset you can then use steps 1 to 7 half-way down the HT5312 page that you posted from to add a rescue email address for potential future use -
Could you help please ? I forgot my security questions answer
Hello to evewryone ! Could you help please ? I forgot my security questions answers !
The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
It is suggested that you contact Itunes Customer Support and ask that they transfer your issue to the Account Security Team to reset the questions so that you may configure them again.
iTunes Support -
http://www.apple.com/support/itunes/ -
Hi there, I just would like to suppress my ADOBE ID but I didn't find the right place to post my question ! Could you help me ?
What do you mean by "suppress my ADOBE ID" ?
The following link might be useful.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Adobe ID and registration chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service-c1.html ( http://adobe.ly/19r6ZDp ) -
Could you help me about table control .. ?
Dear All,
I've a problem in table Control.
I put table control inside tab control (there are many tab in one screen where one tab has one table control).
The schenario of the program, i wanna use table control to maintain the value from some table.
So certainly it has insert/add, delete function.
As we know to do one function in those e.g. add record button, we need specify some code on that button.
So ..
Once when that button is pressed, we can check what button is being pressed using that code.
And it can run well.
But this is the strange one, if i have schenario like this :
1. I click add record button
I will get the add code through ok_code/SY-UCOMM variable.
2. I scroll down/up the table control.
(THIS IS THE WEIRD), the ok_code/SY-UCOMM variable still keep having add code. So every we scroll down/up, application also will add one record.
Could you help me to make ok_code/SY-UCOMM blank in every time i scroll down/up the table control ??
Or could you help me how to i specify the code for scroll down/up the table control so I can identify when user is scrolling down/up the table control??
I really need your guidance/suggestion how to overcome it .. ?
Many tks for all your attention.
Best regards,
Daniel N.Following is a sample code of handling table control in BDC.
REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
DUMMY(100) TYPE C,
END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
LIFNR(10) TYPE C,
BUKRS(4) TYPE C,
EKORG(4) TYPE C,
KTOKK(4) TYPE C,
NAME1(30) TYPE C,
SORTL(10) TYPE C,
LAND1(3) TYPE C,
SPRAS(2) TYPE C,
AKONT(6) TYPE C,
FDGRV(2) TYPE C,
WAERS(3) TYPE C,
END OF IT_XK01,
BEGIN OF IT_BANK OCCURS 0,
BANKS(3) TYPE C,
BANKL(10) TYPE C,
BANKN(10) TYPE C,
KOINH(30) TYPE C,
LIFNR(10) TYPE C,
END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = 'C:\VENDOR.TXT'
FILETYPE = 'ASC'
TABLES
DATA_TAB = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
APPEND IT_XK01.
ELSE.
IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-REF_LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
IT_XK01-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
IT_XK01-BUKRS.
perform bdc_field using 'RF02K-EKORG'
IT_XK01-EKORG.
perform bdc_field using 'RF02K-KTOKK'
IT_XK01-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-TELX1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
IT_XK01-NAME1.
perform bdc_field using 'LFA1-SORTL'
IT_XK01-SORTL.
perform bdc_field using 'LFA1-LAND1'
IT_XK01-LAND1.
perform bdc_field using 'LFA1-SPRAS'
IT_XK01-SPRAS.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-KOINH(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
DATA : FNAM(20) TYPE C,
IDX TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFB1-AKONT'
IT_XK01-AKONT.
perform bdc_field using 'LFB1-FDGRV'
IT_XK01-FDGRV.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS'
IT_XK01-WAERS.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'WYT3-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
points plz (if this information is usefull).
Regard's
Raghunath.S -
Hey all,
I have a question about feature licensing for Cisco ISR 1800, 2800, 3800, 2900 series. I know there are differences between all of the series. My main question which applies for all the Cisco ISR series is this:
"If I want to upgrade the IOS to a newer version and upgrade from the basic feature set, do I need to get a license from Cisco? "
If yes:
And if so, how do I go about purchasing a license? Is a support contract needed?
Again, I need to know for each Cisco ISR series. I'd appreciate any help on this.
Thanks,
JohnYou probably want to reach your SE/AM about this so they can explain you exactly how this works, maybe some sales material, or you can also reach pre-sales.
-
Hi Friends,
If someone is familar to SAP License Audit, please give some suggestions about these questions.
questions here :
(1) I need to calculate active users in PRD system on all client ( 000, 001, 066, 900( our clinet ) ) or on only 900? How about QAS and DEV system?
(2) There is a SAP user ANKIT in PRD 900 & in 000 also. it is one license or two?
(3) We have also some communication user on 900 related to SOLMAN, BIW & other system. These will be calculated?
(4) What abt users on other syetm like BIW, SOLMAN ?
Thanks!
AnkitThis is a Forum for SAP Business One. Please mark this thread closed and post it to the appropriate Forum for replies.
-
Question about SAP client setting when create new connection in CR2008
Dear All,
I have a question about SAP client setting in Crystal Report 2008 when I try to create a new connection use SAP OpenSQL(SAP Table,Cluster,or Function).
I have a SAP IDES environment with 5 clients.
While I try to create a CR standard report use SAP OpenSQL, I entered 800 into Client field in u201CUser logon credentialsu201D. The connection can be created and I can get table list. After I built a report ,I can not get data from IDES client 800, but I can get data from client 000.
I am sure client 800 has data.I checked client 800 table with Tcord se16.
I also did other tests and felt confused a lot.
Even inexistent client, such as u201C00u201Dand u201C8000u201D can be used for creating connection.
I just want to know how can I get data from client 800.
Thanks for your kindly help!
WayneDear Ingo,
Thanks for your reply!
I am not sure about your suggestion clearly. What's your mean all the authorizations to use CR?
Maybe I should clarify my operations.
I logon CR2008 as administrator and created two SAP connections with different client.
There is a table named "/BEV3/CHBALLG" be showed in these connections.
I checked clients "000" and "800" both have data in the table.
I can use client 000 connection create report and get right data, but the report base on client 800 connection could not get data.
If change to another table,such as "/SAPDMC/LSOFIL", I can get data both form these connections.
I found one thing is very weird. Client "00" and "8000" do not exist in my IDES environment, but I can use them for creating connection.
May I have your further suggestions?
Wayne -
Some questions about SAP esourcing
Hi expert,
I have one question about SAP eSourcing. In RFQ document, before RFQ award is published, our customer do not want the price of RFx response disclosed to collaborators. After the award is published, the price can be released to collaborators. As I know, we can use page customization to hide page field. But the price is collection field. So I failed to use page customization to hide it.
Pls advise me how to realize it.Hi
Please go through the relevant pointers ->
eSourcing covers some scenarios in SRM for Bidding and Auctioning.
Have a look at following link for some infos:
http://help.sap.com/saphelp_srm50/helpdata/en/56/c34e3c59bfe747e10000000a11402f/frameset.htm
Re: e-sourcing
eSourcing 4.2 - Page Customization/Extensions
Re: eSourcing withSRM or eSourcing with ECC?
Hope this will help. Do let me know.
Regards
- Atul -
Hi
I connect my ipad to my pc (Windows xp SP3) and I can see my ipad and photos in my computer. When I install the itunes 11 , after installation , I can't connect the ipad again or any other apple device. The Apple Mobile Device USB Driver is listed in device manager, but has a yellow "!".
I have try to reinstall the drivers from c:\progamfiles\common files\apple\... but the problem persist. Could you help anyone about this ?You need to completely uninstall iTunes from your computer and then download and install it again.
You do know that Microsoft has a web site, right? -
Regarding replacement path.. Could you help me please .. ?
Dear all,
I have problem when i use variable replacement path, where it replace another variable.
The scenario is like this:
I have variable cal. month user input where the type is interval (let say it's called var A).
Then i create rep. path variable cal. month:
1. Replace with : Key
2. Use Interval : From Value.
I use this rep. path variable for restricted KF.
When i run the report:
I fill in the value for Var A:
01.2003 - 05.2003
The invalid things are:
1. Rep. Path variable only get the value 01.2003. The impact the KF is only restricted by 01.2003.
It supposed to be restricted by 01.2003, 02.2003, 03.2003, 04.2003.05.2003.
The questions are:
1. How can i overcome this problem?
2. How should i do, if i want to use replacement path in restricted KF that can restrict by 01.2003, 02..2003, 03.2003, 04.2003, 05.2003 ???
Could you help me to suggest what i should do please .. ?
Really need your guidances....
Regards,
Niel.Hi Niel,
When you use a variable(v1) of processing type replacement path and try to replace it wih another variable the replacement is only by single value. This you can find by details tab in the variable(v1) being created.
Hence you have only options of replacing it wih from value/ to value/ difference.
I didn't undersand why you wish to use variable(v1) wih processing type replacement path when you could have used the input variable type for restriction of the characteristic in the restricted key figure.
I think for your requirement variable processing by manual input is more suitable unless you have some reason for replacement which I didn't undestand.
Thanks and regards,
Sunmit. -
From Sweeden - could you help me please ( i've tryed to do that for almost one day)
i thing i have aloop problem, could you help me please. i trying to do if user not put in correct value (number instead of a letter or vice versa ) how can the program go back to first menu ( i have been studying for 3 weeks)
enter code here
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace @break
class Program
static void Main(string[] args)
//Meny
Console.WriteLine("\n HÄNGA GUBBE\n");
Console.WriteLine(" 1) Lägg till ord");
Console.WriteLine(" 2) Lista alla ord");
Console.WriteLine(" 3) Spela");
Console.WriteLine(" 4) Avsluta");
int Valet;
Console.Write("\n\tVälj 1-4: ");
Valet = int.Parse(Console.ReadLine());
switch (Valet)
case 1:
Console.WriteLine("\n lägg ett till ord! ");
break;
case 2:
Console.WriteLine("\n Lista med alla ord :\n");
string[] array = { " Lev", " Skratta", " Gledje", " Gråt", " Njut" };
Array.Sort<string>(array);
foreach (var c in array)
Console.WriteLine(c);
Console.WriteLine("\n");
break;
case 3:
string guesses, bokstäver;
Console.Write("\n Hur många fel får man ha? ");
guesses = (Console.ReadLine());
Console.WriteLine(" Utmärkt, då spelar vi!\n");
Console.WriteLine(" Felgisningar :" + "0/" + guesses);
Console.Write(" Gissade bokstäver " );
bokstäver = (Console.ReadLine());
Console.WriteLine("Aktuellt ord");
Console.Write("Gissa bokstav : "+bokstäver+" \n");
break;
case 4:
Console.WriteLine("\n HEJ DÅ! \n");
Console.Beep();
break;
//avbryter while loopen, avslutar spelet
What do you mean by "lots of problem"? The code I posted certainly compiles and runs just fine. Copy the following code into your Program.cs file in Visual Studio and run it and you will see that it works:
using System;
namespace ConsoleApplication1
class Program
static void Main(string[] args)
//Meny
Console.WriteLine("\n HÄNGA GUBBE\n");
Console.WriteLine(" 1) Lägg till ord");
Console.WriteLine(" 2) Lista alla ord");
Console.WriteLine(" 3) Spela");
Console.WriteLine(" 4) Avsluta");
bool exit = false;
do
int Valet;
Console.Write("\n\tVälj 1-4: ");
try
Valet = int.Parse(Console.ReadLine());
catch (Exception)
Console.WriteLine("Error....!");
continue;
switch (Valet)
case 1:
Console.WriteLine("\n lägg ett till ord! ");
break;
case 2:
Console.WriteLine("\n Lista med alla ord :\n");
string[] array = { " Lev", " Skratta", " Gledje", " Gråt", " Njut" };
Array.Sort<string>(array);
foreach (var c in array)
Console.WriteLine(c);
Console.WriteLine("\n");
break;
case 3:
string guesses, bokstäver;
Console.Write("\n Hur många fel får man ha? ");
guesses = (Console.ReadLine());
Console.WriteLine(" Utmärkt, då spelar vi!\n");
Console.WriteLine(" Felgisningar :" + "0/" + guesses);
Console.Write(" Gissade bokstäver ");
bokstäver = (Console.ReadLine());
Console.WriteLine("Aktuellt ord");
Console.Write("Gissa bokstav : " + bokstäver + " \n");
break;
case 4:
Console.WriteLine("\n HEJ DÅ! \n");
Console.Beep();
exit = true;
break;
//avbryter while loopen, avslutar spelet
} while (!exit);
If you can't get this to work despite someone actually giving the exact code you should probably ask some developer to help you.
If you have some logical issues in your code that's another issue. Please start a new thread if you have a new question.
Note that the forums are not for anyone else to write an entire application or class for you though :)
Please remember to close your threads by marking helpful posts as answer.
Maybe you are looking for
-
No service, sim not provisioned, copy numbers from old phone to iPhone!!!
As Apple don't provide any sort of useful instruction manual with the iphone here are the probs and answers I encountered with my iPhone 3GS. *copy numbers from old phone to iPhone* 1st problem is that my old Nokia had far more numbers stored on it t
-
I have a jailbroked iphone,and it seems that it has some viruses how can I remove them from my iphone?
-
What is the best way to manage photo's with multiple login accounts?
There are three people in my household and each has their own login into the computer. I also have and external drive. Space is becoming short on the computer, so I want to move all my photos and music to the external drive. I have moved all the mu
-
Need to reinstall, having problem. Design Suite Premium 5.x
Downloaded 3.74 of 3.76 GB of reinstallation file for Design Premium Suite 5.1, then download stopped, won't let me resume, gives error message of "You don't have permission to access the re. . ." It took over 12 hours to get that far. Do I have to s
-
Where to find apps for Playbook only?
I do not own a Playbook yet, but likes te buy one. First I want to see which apps are available for the Playbook. It is hard to find apps in the http://appworld.blackberry.com because most of them are for BB-phones, not foor tablets. Is there a way t