Question about SAP standard functionality related to the GL master record.

My question is;
Is this a SAP standard functionality to update the description ( long text or short) of a GL account (in master record) in one company code when we change the description of the same GL account in another company code which is assigned to the same chart of account?
For example we have two company codes and both are assigned to the same chart of account and we are changing long text of one GL account in one CoCd. Should it update the long text of the same GL account in other CoCd assigned to the same chart of account? If so, then is this a standard SAP functionality or there is any setting where we can turn this functionality on or off.
Thanks in advance for help n answer.

Hi
GL accounts control takes place two leval
1.Chart of account leval
2.Comapany code leval
In chart of account leval Type/Description,Keywoard Translation,Information of Chart of Account of account tabs are controlled ,if u made any changes above tabs that should be applicable to all company codes using same chart of accounts.
u r changing the short text,long text these are controlled by char of accounts leval this should be applicalbe to all company codes, u can't maintain company code leval type and description.

Similar Messages

Question about SAP "Techno Functional" label

Hello all,
I am going on my 4th year of SAP BASIS. I am in a very small basis team (3 people) and have experience with implementation and administration of Netweaver 2004s (BI 7.0, ECC 5, CRM 5.0) Yes, not the newest, I know. I also do DBA administration with Oracle 10g, and JAVA due to CRM dual-stack and EP.
My training and focus is on Authorizations and I have quite a bit of experience from projects helping our BA's with both MM and FICO. So I have had a lot of experience on that side from the functional perspective, as well as the BI Analytics and Analysis Auth in our portal.
So I do "a little bit of everything." I have spoken with some contacts who claim I am "techno functional" and should list that. I just wanted some advice on whether this is true, and I should list that, or whether it would be misleading? I know this is generally sought after by smaller shops.
Also, it was suggested that since I do not have much interest in learning ABAP programming in depth, I look more towards PMI training to sharpen my project management skills on the functional side. I am not sure whether PMP or CAPM would be beneficial versus further SAP classes/certifications.
Thanks and hopefully someone can give me an idea whether I can be labelled as "techno functional."

Hi
The following link help your requirement on documentation.
http://help.sap.com/saphelp_banking463/helpdata/en/23/07d128f31011d296330000e82de14a/content.htm
Regards
Shan

About SAP standard reference value of the statistics data ST03N or ST03

Dear all,
Did you have a reference value of the statistics data ST03N or ST03?
Because when I saw the statistics data, I realy could not analysis these statistics data, and I also did not sure the value of the statistics data was right or not.
Could anybody give me a good advice?
Thanks a lot~

Hi CX,
Glad to know you coming from Mainland China
Let me help you to check the very 'old' SAP training book BC315 2003 version on Chapter 4-18 it says:
n     If a problem is detected, the data in the Workload Monitor (Transaction ST03N) can be used as follows to identify the area of the system where the problem is located.
n     First check for general performance problems affecting all transactions. Good general performance is normally indicated by:
     Wait time < 10% response time
     Main menu (choose Transaction Profile) < 100 ms
n     In the Workload Monitor, the following values normally indicate good performance:
     Average roll-in time < 20 ms
     Average roll wait time < 200 ms
     Average load (and generation) time < 10 % of response time (<50 ms)
     Average database request time < 40 % of (response time - wait time)
     Average CPU time < 40 % of (response time - wait time)
     Average CPU time Not much less than processing time
     Average response time - Depends on customer requirements there is no general rule
The last statement is pretty much reasonable coz you cannot expect an old machine running latest SAP version like ECC 6.0 performs as fast as current big giant machine like IBM p5 595.
From my experience sometimes hardware upgrade/configuration is much easier than an SAP Basis to try to drain his brain to get the 5% performance increase. For example, an ECC 5.0 instance which using EMC storage was configured as RAID 5 initially, however later when it was configured as RAID 1+0 the performance increased a lot --- Bottle net was the storage.
Many cases like that...What I mean is that by maximum the hardware of the machine is the first thing to do for an SAP Basis... It's not surprised that a box is only utilized 40% of its memory, of course, by mistake.
Nice to know you again my Mainland friend I've been missing that hometown for long.

Question about SAP client setting when create new connection in CR2008

Dear All,
I have a question about SAP client setting in Crystal Report 2008 when I try to create a new connection use SAP OpenSQL(SAP Table,Cluster,or Function).
I have a SAP IDES environment with 5 clients.
While I try to create a CR standard report use SAP OpenSQL, I entered 800 into Client field in u201CUser logon credentialsu201D. The connection can be created and I can get table list. After I built a report ,I can not get data from IDES client 800, but I can get data from client 000.
I am sure client 800 has data.I checked client 800 table with Tcord se16.
I also did other tests and felt confused a lot.
Even inexistent client, such as u201C00u201Dand u201C8000u201D can be used for creating connection.
I just want to know how can I get data from client 800.
Thanks for your kindly help!
Wayne

Dear Ingo,
Thanks for your reply!
I am not sure about your suggestion clearly. What's your mean all the authorizations to use CR?
Maybe I should clarify my operations.
I logon CR2008 as administrator and created two SAP connections with different client.
There is a table named "/BEV3/CHBALLG" be showed in these connections.
I checked clients "000" and "800" both have data in the table.
I can use client 000 connection create report and get right data, but the report base on client 800 connection could not get data.
If change to another table,such as "/SAPDMC/LSOFIL", I can get data both form these connections.
I found one thing is very weird. Client "00" and "8000" do not exist in my IDES environment, but I can use them for creating connection.
May I have your further suggestions?
Wayne

Is there any detail description of SAP standard function?

HI
I just curious about wheather any references of SAP standard function exist.
for example. I found 'UMB_VAR_TO_FISCPER' function which is someone's abap code but I can't get any clue what that function use for.
I only can see type description in function source code.
Is there any references of SAP function?
thanks.

Go thru the below link
<a href="http://http://www.sapdevelopment.co.uk/fmodules/fmssap.htm"></a>
You will find Function Modules with description and with example.

Questions about user-defined functions

Hello all,
I've got some questions about user-defined function in a message mapping:
1) How can I get the current date/time in format yyyy-mm-dd hh:mm:ss ? What is the java code for this?
2) I want to use the StreamTransformation constant TIME_SENT, only this is not in the right time-zone.
It is GMT and it should be CET (1 hour difference). How can I convert this in Java?
Can somebody help me with this?
Thanks in advance.
Kind regards,
Marco van Iersel

Hi Marco,
If the date format is fixed as you have mentioned,please use this:
                                String test = "2009-03-27 23:15:30";
          String test1 = test.substring(11,13);
          if(!test1.equals("23"))
          int a = Integer.parseInt(test1);
          int b = a+1;
          System.out.println("b"+b);
          String c = Integer.toString(b);
                                test = test.substring(0,10)+" " + c + test.substring(13,19);
                                return test;
          if(test1.equals("23"))
          test = test.substring(0,10)+ " 00" + test.substring(13,19);
          return test;
                                else return "";
Kindly let me know if this works.
Thanks.
Regards.
Shweta

Where-Used List: Modifying SAP standard function module

Hi,
We have decided to modify SAP standard function module SD_SCHEDULING. But before that, we need to understand what impact this modification will have in the system. We will also estimate the risks with this modification.
Therefore, I have taken Where-Used List for this function module. We are aware that this list is not comprehensive.
Do you know any other way we could use to understand better what impacts this kind of modification may have? My colleagues say that this is the only way.
Thanks in advance for your help.
Regards,
Jarmo Tuominen

Hi Jarmo,
Try this
1). Goto Se16 and check the contents of table 'CROSS'.
2). Enter 'F' in the first selection screen field
3). In the NAME field enter the Function module SD_SCHEDULING and execute.
4). The list will give you where all the FM has been used.
Kindly note this is almost the same as doing a where used list. The where used list will only work correctly if the 'Update Navigation Index' works correctly in your system. So just to ensure the result of your where used list you can follow the above steps. This does not require the Update Navigation Index.
Hope this helps
Cheers
VJ

Lst of all sap standard function modules???

can anyone provide with a list of all sap standard function modules??? I am currently working in Product costing.As per my Functional specification i need to find the number of cost centers in a cost center group.we guess that this information will be available from a function modules.so can anyone provide all the function modules of sap.

Hi,
Check this link :
<a href="http://www.erpgenie.com/abap/functions.htm">http://www.erpgenie.com/abap/functions.htm</a>
-SatyaPriya

Some questions about SAP esourcing

Hi expert,
I have one question about SAP eSourcing. In RFQ document, before RFQ award is published, our customer do not want the price of RFx response disclosed to collaborators. After the award is published, the price can be released to collaborators. As I know, we can use page customization to hide page field. But the price is collection field. So I failed to use page customization to hide it.
Pls advise me how to realize it.

Hi
Please go through the relevant pointers ->
eSourcing covers some scenarios in SRM for Bidding and Auctioning.
Have a look at following link for some infos:
http://help.sap.com/saphelp_srm50/helpdata/en/56/c34e3c59bfe747e10000000a11402f/frameset.htm
Re: e-sourcing
eSourcing 4.2 - Page Customization/Extensions
Re: eSourcing withSRM or eSourcing with ECC?
Hope this will help. Do let me know.
Regards
- Atul

3 important questions about SAP HANA

Hello Community!
I have got 3 important questions about SAP HANA.
1.
- Our Company has all up about 150 SAP - Systems.
- 12 Systems are ERP-Systems.
=> We consider about SAP HANA at the moment.
=> Is it possible to put all the 12 ERP-Systems in ONE SAP HANA or do I need one seperate HANA for each ERP-System?
=> If it is possible, can you tell me the disadvantages when I use 1 HANA for the 12 ERP-Systems.
=> Is there a Storage-Limit in the HANA (I think no, because of 64 bit).
=> Can I still make realtime-analytics with 1 HANA for 12 SAP Systems?
2.
=> Can I run ONE HANA with different non-SAP-Systems?
3.
=> Is there a Demo-Center from SAP or IBM, where I can test and see the HANA before I buy it?
(I do not mean the Fujitsu TDS Demo Center)
It would be nice, when you would answer all my questions.
Thank you.

I have got 3 important questions about SAP HANA.
1.
- Our Company has all up about 150 SAP - Systems.
- 12 Systems are ERP-Systems.
=> We consider about SAP HANA at the moment.
=> Is it possible to put all the 12 ERP-Systems in ONE SAP HANA or do I need one seperate HANA for each ERP-System? Yes it is quite possible to put all the ERP/CRM/SCM or other components on one HANA. You need to check for pricing/users/RAM (storage)
=> If it is possible, can you tell me the disadvantages when I use 1 HANA for the 12 ERP-Systems.
There are no disadvantages as of now.. improve existing planning, forecasting, pricing
optimization and other processes
=> Is there a Storage-Limit in the HANA (I think no, because of 64 bit).
There is no limit on Stotrage: You need check how much Data you need on RAM (Real time processing) Storage.Minimum you can buy is 64 GB and multiple of it for (RAM)
=> Can I still make realtime-analytics with 1 HANA for 12 SAP Systems?
Yes certainly..
2.
=> Can I run ONE HANA with different non-SAP-Systems?
YEs you can run HANA for 3rd party S/W or non-sap systems for your real time anlytics.
It has ODBC and JDBC both and you can combine it with other systems.
3.
=> Is there a Demo-Center from SAP or IBM, where I can test and see the HANA before I buy it?
(I do not mean the Fujitsu TDS Demo Center)
This you need to check with your local SAP Service channel..
It would be nice, when you would answer all my questions.
Thank you.
PY

SAP Standard Functionality ?

Hello PP members:
In GAP analysis, the clients requirement is "capacity to be checked during MRP run and if sufficient capacity is there then MRP run should not create orders"
But SAP standard functionality MRP run always creates orders irrespective of capacity checking
Is there any work around for this problem, If yes please let me know
Thanks for your time & efforts
Thanks Again,
Suren

Hi Suren,
basically what MRP does it create Planned order that means it is booking hours into m/c, when you do lead time scheduling dates will be thrown to free period where no capacity is booked and if dates not matching it reschedule the planning
Thats wat standard SAP does
Thanks
Bala

Does SAP have function to allow the prices for the activities type to copy

Hi Expert,
Would like to seek for your help refer to above subject.
Does SAP have function to allow the prices for the activities type to copy from previuos fiscal year to current fiscal year so that we do not need to manually set up the acitvities types prices via KP26.
What are the T-code and what are the configuration need to be set in order to use the function.
Please help.
Regards,
KH

Hi,
Thank you for the prompt reply.
However, would like to seek for your advise does SAP provide standard report to view the cost of activities incur?What are the T-code?
Thank you.
Regards,
Karen

Question about SAP Router Version

Hi All,
I have a question about SAP Rotuer. How can I check what is my sap router version?
I plan to upgrade my sap router to version 23 because It can monitor by windows services.
Does any one know about this ? Please kindly explain.
Thank you & Regards,
Vipu

Go to saprouter directory in command prompt cd :\usr\sap\saprouter
> type saprouter -v
You can see result like below
SAP Network Interface Router, Version 38.10
compiled Mar 1 2010 01:38:53
start router : saprouter -r
stop router : saprouter -s
soft shutdown: saprouter -p
router info : saprouter -l (-L)
new routtab : saprouter -n

Product hierarchy in the material master record

Hi,
I am handig Data migration project.
This is related to Product Hirerarchy.
I one business Product Hirerarchy have been configured. But in another buisiness, Product Hirerarchy has not been configured.
There are some common materials using by both business processes.
For coomon mateials if I am maintaining Product Hirerarchy value in the material master record, is there any impact on business which is not being used Product Hirerarchy. Whether it will stop / impact on business processes.
Can you explain plz
Thanks in advance
Regards

Hi karthink,
Thanks for your inputs.
we are meging two servers. In that in one server, product highrechy have been configuredand in another server not configured.
There are some materials with the numbers calling as a common parts exists in both servers.
ex: plat 0001 in one server 1 & plant 0002 in server2
Common part is : m1
plant 0001 not using product hierarchy and plant 0002 not using product hierarchy,.
After golive, all the common parts are being used by both plants and same basic data 1 view.
If we are maintaing product hierarchy in the basic data 1 view, it will flow into sales view as well.
Then what about impact on the plant 0001 business since it is not using product hierarchy.
In the configuration, is there any settings to activate / deactive product hierarchy at sales area level.
Is there any impact on MM / FICO side.
Please explain.
THANKS IN ADVANCE.
Regards
KRK

Output Determination from the Customer Master Record

Dear All,
Can anybody please help me out with the configuration level settings for output proposal from the customer master record.
Thanks
Deepak Joshi

Hi there,
Can you pls let me know from where did you get the information that O/p can be triggered from customer master records? & in what scenarios you can trigger them?
My experience in SAP tells me that O/p can only be truggered through condition techique where you will assign the determination procedure to the sales doc type.
No where I have seen assigning the O/p determination procedure to something related to customer / customer types.
For the O/p to trigger you need to maintain condition master records. I hope you are not getting confused between condition records & customer master records.
Regards,
Sivanand

Question about SAP standard functionality related to the GL master record.

Similar Messages

Maybe you are looking for