Question about setting Rows to "All" for defualt Interactive Report

I have a default report with 2 user requirements that I have some questions about.
1. The report in the data sould be 90 days old.
2. The report show "All" rows.
First to set the date I have this page process:
apex_util.ir_clear(p_page_id => 2);
apex_util.ir_filter(p_page_id=>2,
p_report_column=>'REQUISITION_DATE',
p_operator_abbr=>'GTE',
p_filter_value=>SYSDATE - 90);
I also set the rows to "All" and save the report to be the default. However I think when the "apex_util.ir_clear(p_page_id => 2)" is executed it clears someting and my report opens with rows set to "15".
Any ideas on this or even a better way to do it?

the following link may help...
It says that the ir_clear "Clears any report filters including default filters"
apex_util.ir_* documentation - where to find them?
Gus..

Similar Messages

Question about setting cookies and custom authentication

I have a question about setting cookies.
I have two different 'projects' in HTMLDB - we will call them App1 and App2.
I also have two different connection configurations setup in the DADs.conf file. - we will call them Connect1 and Connect2.
App1 is setup to use database authentication (no user is specified in the DAD) and uses Connect1. Once the user successfully logs in, we set a username cookie (this is a persistent connection).
We created a custom authenticatoin scheme for App2 - this scheme checks for the username cookie (set by App1). We would like for App2 to use Connect2 (HTMLDB_PUBLIC_USER is the default user specified and it uses connection pooling).
Is it possible to set a cookie from App1, Connect1 for App2, Connect2 - then redirect to App2 and pick up that cookie?
Here is an example of what we are trying to accomplish:
A user loggs into App1, we set a cookie, and the user is redirected to App2. If the cookie exists, we allow them access to the home page in App2, if no cookie, we redirect back to a 'Login Failed' page in App1. We don't want App2 to use the same database connection as App1 though, we need App2 to use connection pooling.
Is this possible? OR...Is there a better way to accomplish what we want to do?
This is an enhancement to an existing app. Our requirements are to use Database Authentication (setup where pass expires after 60 days or so, cannot reuse last 3 passwords, etc.) - which is already setup and being used by other applications in our organization. All of our users have accounts in the database. We don't want users to have a new username/pass - and we don't want to manage a separate group for HTMLDB apps.
The existing application uses HTMLDB's built in authentication - which uses database username/pass, and it uses connection pooling, but we cannot handle the pass expire stuff in it, unless there's something we're not seeing or understanding - at least that's how our DBA explained it to us.
Any help with this will be appreciated so much. I can send you the code we have if needed.
Thanks!

Same problem here. I have so many problems with this remote app. Is there an iTunes API? I would like to write my own remote app that actually works.

Question about Setting Window Title/the use of AVWindowSetTitle()

Hi everyone,
I have a question about setting the title of the window in which the Acrobat viewer normally opens a PDF file. The documentation states that AVWindowSetTitle() cannot be used in this case. However, using it has worked with versions of Acrobat/Reader up until and including version 8.
Everything breaks down starting with Acrobat 9.
According to the documentation I am supposed to do the following: "To set the title of a window in which the Acrobat viewer opens a PDF file, you must replace AVDocOpenFromASFileWithParams() and pass the window title in tempTitle."
Unfortunately, there are 2 problems I have with this approach:
     I do need to be able to change the document title on document Save, not only on document Open
     I do not know what AVDocOpenFromASFileWithParams() implementation has to look like if I have to replace it using HFTReplaceEntry().
Is there a sample customized implementation of AVDocOpenFromASFileWithParams() somewhere that I could take a look at?
Is there a way to change a document Title inside Acrobat/Reader window after a Save operation?
Thanks a million,
Lana2010K

     I am sorry. I don't know how you tested this and came to conclusion that this works correctly in Acrobat X.
     I just tested our Acrobat plug-in with a trial version of Acrobat X and this did not work.
     When we open a file in Acrobat (doing it ourselves in the plug-in by adding another specialized open) we set the window title to something different from the default file name. Then if a file gets edited and saved (File->Save), the window title gets reset to the file name. In the PDDocDidSave callback we call AVWindowSetTitle() to set it back to a more descriptive window title we need. This has worked up until and including Acrobat 8, but does not work in either version 9.0 or 10.0.
     Also, I just modified the plug-in code to always change the Window Title of every document (even if opened through native File->Open) on document Save. It does not work.
     Please help,
          Lana2010K

How to set number of rows in "Rows Per Page Selector" in Interactive Report

Hi Guys,
Is there any way to set the number of rows in "Rows Per Page Selector" in Interactive Report. By default it is set to 15.
I know one way is to change the number of rows when you are running the report and then set that as 'Default Report Setting'.
If anybody is aware of any other way, please let me know.
Cheers,
Ashish Agarwal
http://www.dbcon.com.sg

Hi Pavel,
can you please specify your question more clearly. If you are on NW 7.0 you can determine a number of colums for your filter item with following command:
COLUMNS
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/85/08e241aa8e9d39e10000000a155106/content.htm
If you meant the amount of rows within the analysis item you can use following command within your analysis item:
BLOCK_ROWS_SIZE (numbers of rows displayed at once)
BLOCK_ROWS_STEP_SIZE (numbers of rows to be scrolled for one step)
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/76/489d39d342de00e10000000a11402f/content.htm
Brgds,
Marcel
Edited by: Marcel Landsfried on Feb 10, 2009 7:45 PM
Edited due to wrong url

TITLE for the Interactive report

Hi,
I like to show a Title for the Interactive Report in several different languages.
But it seems if I just pick Interactive report, there will be no Title shown.
What is proper way of doing this ?
So, what I did was, I created a HTNL region, just to show the Title, but it seems the translation and XLF file doesn't pick it up
Please help
--John

I have further to report.
It looks like a bug.
The REGION title text is missing in "TRANSLATE APPLICATION" in "SHARED COMPONENTS" under WINDOWS environment.
The REGION title text is in SUN environment, but does not shown as translated in the browser.
Thx
--John

Plugin for Hyperion Interactive Reports

Is there an Eclipse plugin which may be used for Hyperion Interactive Reports?

Hi,
Have you ever managed to find some Eclipse plugin for Hyperion Interactive Reports?

Question about the Documentation Tags for Source Code

Hello,
I have a question about CVI's automatic source code documentation. My problem is that is seems like you need to write all documentation for a specific tag on one line. If you don't, a line break will be inserted when the documentation is displayed. Suppose I want to write a large amount of documentation for the function itself, using the HIFN tag. If I don't want linebreaks to be forced in the documentation, I need to write all this documentation on one single line, which kinda messes up my code. If I split the documentation over several HIFN tags, the documentation displayed to the user might look messed up because of all the linebreaks. Is there any escape character I can put at the end of a line, allowing me to split the documentation of several HIFN lines without forcing linebreaks in the documentation?
Thanks!
GEMIDIS - Innovating Display Technology
HQ Ghent, Belgium

This information is certainly useful. Note, however, that it can also be found in the documentation
Tag
Description
/// HIFN help text
Specifies the help text for the function. Use multiple /// HIFN tags to display help text for the function on separate lines. To separate help text with an empty line, use /// HIFN on a line by itself. You also can use HTML tags, but you must enclose the tags in <HTML><BODY></BODY></HTML> tags.
Example
/// HIFN SampleFunction returns the value of a control.
int SampleFunction (int controlID, ctrlType controlType, char label[], double *value)
SomeAction;

A zillion questions about setting up and using external hard drive

Hello. I recently purchased a Cavalry 440GB CACE USB/FW800 7200 RPM 3.5 in Mac Formatted hard drive. My Mac is a Power PC G4 using OS X 10.2.8.
After much back and forth with the Cavalry support desk, I was able to connect it to my Mac. (The USB cable included was not compatible--fortunately, my printer cable was.)
Through Disk Utility I see that my Mac is detecting the hard drive, but there's no icon on my desktop. My questions are as follows:
1. How do I get the icon on my desktop?
2. It was suggested on this board to partition the hard drive. What exactly is partitioning, and is it necessary?
3. If I do partition the hard drive, into how many partitions should I make it?
4. Once the number of partitions is set, can that number be changed? In other words, can it be repartioned without erasing anything?
5. My main purpose for getting the external hard drive is to move all my movies off my Mac. I'm sure I will want to back up other files as well. Should I create one partition for all the movies, and one for photos, one for files, etc.?
6. Once I get the icon on my desktop, is transferring files as simple as dragging the files onto the icon?
7. Once I move files to the hard drive, is it simple to move them back to the Mac if I need to use them again?
OK, that's all for now. I appreciate your patience in dealing with all my questions! Thanks.

Hello,
I'll try my best on the first seven. The remaining zillion minus seven questions will have to wait!
1. If the drive really is Mac-formatted it should just appear. Firstly check that hard disks are set to appear on the desktop. In the Finder go to Finder > Preferences... >General tab and ensure that the box to show hard disks on the desktop is checked. If that doesn't work go to Macintosh HD > Applications > Utilities >Disk Utility. Select the drive in the left hand pane and then click on the "Erase" tab. Erase the disk and ensure the format is "Mac OS Extended (with Journalling)".
2. Partitioning is splitting the physically drive into two or more volumes. This will allow you to compartmentalise your data. You will have two or more icons appear on the desktop if you do partition. Although they are on the same physical disk you will be limited on each of the volumes to the size you set at the time of partitioning. If you do partition the drive be sure to use the "Apple Partition Map" not "GUID Partition Map". The latter is for Intel Macs.
3. Whatever you want. My experience is that too many partitions and you loose flexibility in your storage space. Personally on my external drive I have a partition that is exactly the same size as my internal hard drive. I then use that to do a regular clone backup. I then have a second partition for general use. This means I can put files on the external but still guarantee I have enough spare to backup fully.
4. No. Not without third party tools.
5. As I said above, in my opinion the best use is to create a partition for backup and a partition for all other use.
6. Yes absolutely. However if you plan on moving libraries like iTunes or iPhoto then you'll need to show the applications where the libraries are again.
7. Yes.
Some extra pointers:
A. Use Carbon Copy Cloner to backup your internal drive to the external. Clones are fantastic backups as even if the internal drive bursts into flames you will have an identical copy of all user data and settings: http://www.bombich.com/software/ccc.html (scroll to the very bottom for the version suitable for 10.2.8).
B. Don't use USB to connect the hard drive it's not very fast. Firewire 400 is significantly faster and will allow the iMac to be booted from the external drive in an emergency (USB will not boot a G4 Mac).
Hope that helps a little.
mrtotes

Question about setting track level

Hi I finally got my new macbook pro and moto 8 pre and have just today tried a bit of recording just to get used to it. I am at the moment using garage band. I have a question about track levels. In Garage Band when I select a track to record there is a slider for input level or an option of clicking the automatic level control. But for some reason they are both just that color of grey you get when something can not be selected on a computer. How do I activate this? It's strange as I did actually manage to record the track, I just can't seem to really adjust the level. I thought maybe it has to do with the motu and I can only select the track level there, and that garage band level setting are (rightfully) disabled? Maybe that's what I should be doing, but just a bit confused. Anyway, thanks in advance for whoever takes the time to help out a newbie.

Ah, ok. Good to know. Thanks for the info.

Question about SET FRMLBOTTOMUP

I'm getting unexpected resutls when using this set command and could use some feedback. EXAMPLE OF CALC - SET FRMLBOTTOMUP ON;SET UPDATECALC OFF;SET CACHE HIGH;/*This step multiplies UNITS times RATE and records the results on AMT, for all level 0 entities of North America SS */FIX(&Svar_Years,&Svar_Scenario,"FA10","FA11","FA12","FA13","FA14",@RELATIVE("XX SS",0), Local,"4111_AMT" ) "Current Version"="4111_UNITS" * "4111_RATE";ENDFIXWith SET FRMLBOTTOMUP ON Essbase calcs "4111_UNITS" * "4111_RATE" correctly but places the result in not only "4111_AMT" but also in "4111_UNITS" and "4111_RATE", erasing what was previously there. This only happens with SET FRMLBOTTOMUP ON otherwise the calc of unit times rates works fine. It also works fine if I replace the left side of the equation from "Current Version" to the account "4111_AMT" which is a dense member. I don't understand why that should matter and what about SET FRMLBOTTOMUP ON causes Essbase to place the result of the formula in the members used to generate the result in the first place. Any suggestions would be much appreciated. Thanks.

thanks, can u explain when this server serialization
occurs and why? the application i am using uses lots
of beans with data coming from database, and those
beans are used for display and calculation during
user interaction(one session). is there a risk of
lossing information during the interaction when
server serializes session? thanksIt depends on the Server, and on the session manager used.
For instance, Tomcat, with the default manager, will try to serialize sessions when the context is restarted so that user data is not lost during application upgrades. It will also attempt to serialize if the JVM begins to run out of memory.
A second manager available in Tomcat will try to store all session data in a database, the file system, and the like so that it does not take JVM resources. This requires serialization.
Finally, You can use load balancing or other clustering techniques to back up Tomcat (so one server doesn't do all the work, or if it goes down, other servers will handle requests). Since sessions will need to be shared (or sharable) between different servers, the data must be serializable so it can be sent from one to the other (or actually sent and received through an external storage system like a DB) they must be serializable for this to work...

A question about the option Reset All Settings

Hello, I have a question about the reset all settings function in the IPad. I need to keep all of the installed applications on the device yet I need to remove any log in information and contacts. Is this the correct option or would the Erase All Content and Settings be what I want?

If you read the OP's request, they "need to keep all of the installed applications on the device". Selecting "Erase All Content and Settings" will do just that, erase everything.
Faroff, you can remove accounts in Settings/ Mail, Contacts, Calendar ... that would remove contacts only if the contacts were synced to such an account. If contacts were synced from iTunes, you'd have to un-sync them from iTunes by changing the sync settings. If the contacts were just manually entered and not synced with anything, you have to delete them one by one. However, iOS will remember past usage of a contact, so even if you remove them they may be recalled by you initiating an email or iMessage to something close to what used to be in the Contacts app. The only way to clear that I think is to do a full erase of the iPad.
As for log-in information, go to Settings/ Safari/ Passwords & Autofill, where you can erase passwords and saved credit card info. You can also clear cookies and data in this menu.
You might be better off doing a full erase of the iPad. Why do you not want to remove the apps? You can re-sync them from iTunes or re-download them if necessary. Or did you inherit this device from someone else and you're wanting to keep their apps installed but remove their private information?

Hi! Question about setting default size when opening existing PDF's.

The pdf documents i download all seem to open up at 202% size. Is there a way to set my default size (for opening and reading documents) to something smaller, so I don't have to always use the magnifying tool to shrink them? Thanks!

Under Preferences | Page Display, set Zoom to 100% or whatever you would like to open it with.

Newbie question about setting the date of a UIDatePicker

I created a UIDatePicker in my view and called it targetDate.
If I don't set targetDate's date property, the UIDatePicker shows up by default with a date of November 30, 0002.
So, when the view loads, I did this:
NSDate *today = [NSDate date];
targetDate.date = today;
(Note: in the above expression, the square brackets around "NSDate date" don't show up and are turning the expression into a link instead.)
After doing that, when the view loads the UIDatePicker object initially shows the correct month and date, but it shows 0001 as the year.
So my question is, why doesn't this set the correct year?
In the Interface Builder the UIDatePicker's minimum and maximum dates are set from 1/1/0001 to 1/1/4001. I don't know if that has anything to do with the problem. I assumed that was just setting the allowed range for picking.
I don't know what the "Date" setting field in the IB above the minimum date field is supposed to be for either.
Anyway, am I not setting the date property correctly?
Thanks,
doug
Message was edited by: Doug Lerner2

Instead of setting the .date property when the view loads I ended setting it when the UIDatePicker is displayed and the date setting works ok now.
By the by, if you have very early dates set, like January 1, 0001, the dates of the months are off by a few days. I guess that has to do with the whatever happened like 1000 years ago when they made a big adjustment to the calendars.
doug

Question about sets in report painter.

Hi, everybody. Please, could someone help me in this matter?.
I wanna delete a set with the GS04 transaction in Report Painter but I cannot.
When I put the set's id (XXX) in the set's name and push Delete-Set-F8 button, I get the following error:
The XXX set cannot be deleted.I consult the error with the help and SAP tells me that I need to use the set-usage option to view where the set is used in the system.
I select this set-usage option under the utilities menu and SAP tells me that the set is being used in a report.
The thing is that the report doesnt exist. I deleted the report before. Why the error is then.
However, I created, generated and compiled the report again in report painter with other different set so that I confirmed that the report was not using the XXX set and the error continues with report or without it.
That I tried to say was that the XXX set is not being used anywhere and the question then is why report painter is telling me that the set is being used in a report. Thing that is not true.
Thanks and I hope someone can help me out!!

Hi, everybody. Please, could someone help me in this matter?.
I wanna delete a set with the GS04 transaction in Report Painter but I cannot.
When I put the set's id (XXX) in the set's name and push Delete-Set-F8 button, I get the following error:
The XXX set cannot be deleted.I consult the error with the help and SAP tells me that I need to use the set-usage option to view where the set is used in the system.
I select this set-usage option under the utilities menu and SAP tells me that the set is being used in a report.
The thing is that the report doesnt exist. I deleted the report before. Why the error is then.
However, I created, generated and compiled the report again in report painter with other different set so that I confirmed that the report was not using the XXX set and the error continues with report or without it.
That I tried to say was that the XXX set is not being used anywhere and the question then is why report painter is telling me that the set is being used in a report. Thing that is not true.
Thanks and I hope someone can help me out!!

Trying to programmatically set the data-source for a Crystal reports report.

I've got the following existing procedure that I need to add to in order to programmatically set the data-source (server, database, username, and password) for a Crystal reports report.
I added the connectionInfo parts, but can’t figure out how to attach this to the existing
this._report object.
This is currently getting the connection data from the report file, but I now need to populate this connection data from a 'config.xml' text file.
Am I trying to do this all wrong?
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using CrystalDecisions.CrystalReports.Engine;
using WGS.Reports.Reports;
using CrystalDecisions.Shared;
using WGS.Reports.Forms;
namespace WGS.Reports
public class ReportService
ReportClass _report;
ParameterFields paramFields;
ConnectionInfo connectionInfo; // <- I added this
public ReportService()
public void DisplayReport(string reportName, int allocationNo)
if (reportName.ToLower() == "allocationexceptions")
this._report = new AllocationExceptions();
PrepareConnection(); // <- I added this
PrepareAllocationExceptionReport(allocationNo);
this.DisplayReport();
private void PrepareConnection() // <- I added this
//test - these will come from the config.xml file
this.connectionInfo = new ConnectionInfo();
this.connectionInfo.ServerName = "testserv\\test";
this.connectionInfo.DatabaseName = "testdb";
this.connectionInfo.UserID = "testuser";
this.connectionInfo.Password = "test";
this.connectionInfo.Type = ConnectionInfoType.SQL;
private void PrepareAllocationExceptionReport(int allocationNo)
this.paramFields = new ParameterFields();
this.paramFields.Clear();
ParameterField paramField = new ParameterField { ParameterFieldName = "@AllocationNo" };
ParameterDiscreteValue discreteVal = new ParameterDiscreteValue { Value = allocationNo };
paramField.CurrentValues.Add(discreteVal);
paramFields.Add(paramField);
private void DisplayReport()
frmReportViewer showReport = new frmReportViewer();
showReport.ReportViewer.ReportSource = this._report;
showReport.ReportViewer.ParameterFieldInfo = paramFields;
showReport.ShowDialog();
showReport.Dispose();
Any help would be much appreciated.

Hi Garry,
Please post SAP Crystal Reports questions in their own forums here:
SAP Crystal Reports, version for Visual Studio
We don't provide support for this control now. Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Question about setting Rows to "All" for defualt Interactive Report

Similar Messages

Maybe you are looking for