Question about silent switch?

I've had my 3gs for about 3 weeks this sunday my switch seem's to be loose can i still exchange it?

You should still be within the warranty period for the phone. You'll want to make a Genius bar appointment and discuss the issue with them at your local Apple store. Alternatively, you can call Applecare and discuss the issue with them. They will make the final determination - we can't say for certain if they will replace or not.

Similar Messages

Question about central switching mode

Hi team
My customer's WLC is in following mode:
central authentication, central switching—In this state, the controller handles client authentication, and all client data is tunneled back to the controller. This state is valid only in connected mode.
He want to know what is the result if the AP loss the communication with WLC.
Does the AP can still provide service to clients?
If yes, is it all services?
In my opinion, in central switching mode, AP should not provide services any more after disconnect with WLC, and cannot add any clients too.
Do we have any URL or document about detail of flexconnect?
Best regards
QxiangZh

in local mode, once the link to the WLC goes down, the AP is down.
FlexConnect is what you would need to do:
http://www.cisco.com/en/US/docs/wireless/ncs/1.1/configuration/guide/hreap.pdf
Configuratio guide
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080b3690b.shtml
Feature Matrix
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Question about lock switch for smart phones

i would like to ask about the lock switch for smart phones like Nokia 5800 Xpressmusic or Nokia 5230.
Will the lock switch loosen if we always slide to unlock it?

i used my 5800 for 11 months and it didn't happen at all
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

Hyper-V: Questions about Virtual Switches

Hello,
This question concerns a computer running Windows 8 Pro.
Using Hyper-V, I have created a virtual machine running Windows XP Pro. (we must use it to run a very old CAD program so that we can access our legacy drawings from years ago)
I am not concerned with Internet access for the virtual machine; I just want it to connect to our LAN.
Anyway, so far, so good; I created an external virtual switch, and it works just fine. However, I have noticed that the virtual switch "takes over" the computer's physical NIC. This is making network access from other computers to
this machine very, very slow. (it has other functions in this office)
So, I tried changing the virtual switch to either Internal or Private. This "released" the physical NIC and greatly sped up access to the physical machine, but now I cannot access the LAN from "inside" the virtual machine.
So, my questions are:
1. How do I access the LAN with a virtual switch that is set to Internal or Private? Is that possible?
2. If not.... if I added a second physical NIC to the computer just for the virtual switch, would that work?
Thanks in advance,
-Kevin

1. How do I access the LAN with a virtual switch that is set to Internal or Private? Is that possible?
Not possible. Internal is local to the hardware. Private is local to the VMs that are being managed only.
2. If not.... if I added a second physical NIC to the computer just for the virtual switch, would that work?
Yes, this is one solution.
The other solution is most likely to tune the driver settings of the physical NIC. Disabling the multiple TCP Task offloading options.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Question about using Switches in different Software Layers

Hi all,
I have the following problem : I have Switch A and Business Function A in Software Layer 1, and Switch B and Business Function B in Software Layer 2(which is higher than Software Layer 1). Is it possible to assign both switches(A and B) to the Business Function B and switch them both on?Or is it possible to set the Business Function A as a prerequisite of the Business Function B?
Thanks,
Sukru

Hi
Please check this link
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/43/b494429d7c0631e10000000a1550b0/frameset.htm

Question about processor switch

Hello,
I just got my new 21.5 imac and I was wondering if anyone has changed processors before? I know, I know....this will void my warranty and all that good stuff, but its just a question. I see that the 21.5 inch uses the LGA 775 Socket T. In theory, this machine would support up to a Core 2 Quad Q9400. Am I correct to assume this? Thanks for the help.

Even if it works "in theory," the heat dissipation design may not be sufficient to handle the additional heat. And there may be additional power draw that is not accounted for in the design. I wouldn't "assume" it will work, just because the sockets are the same.

Question About "The Switch"

I am definitely thinking about purchasing a MacBook, but before I do that, I need to know if I will be able to do the same things with it that I am able to do with my windows machine. The most important thing is word processing, I don't think MacBook comes with Microsoft Word as my computer came with, so what software does it come with. I also use PowerPoint and Excell frequently. I already use iTunes everyday so I know that won't be a problem. I also just bought a new Sony Cybershot and the picture software does not support Mac OS X, so does the MacBook come with some sort of picture software?
Thanks in advance,
Dan

I think you can use any digital camera.Since iLife 06 we don't use manufacturers software.I threw away my Olympus software and I have imported from at least 5 different cameras to my PB without any additional software.I hink it's fully "plug-and-play".You can always test in a friend's Mac though...

Question about App Switcher

Would a contact appear in my app switcher list if I had not called or text them? If so, what reason might that be?

all the contacts in your favorites ( i believe) are listed even if you havent contacted them recently - i assume the ones that only show texts is because you only texted them (or they you) - the ones that show calls and texts should mean they did both

Firefox refuses to start up after I asked a question about aboutbrowser switch from "Google" to "Bing" I get error message "1712" and can't find a way to uninstall.

Firefox refuses to start up at all

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

Question about how the Robocopy /B switch works...

I've been experimenting with robocopy recently, and most switches seem self explanatory for the most part; although I have a question about the /B switch.
The help says the following:
/B :: copy files in Backup mode.
I've checked multiple forums and websites to try and elaborate on this a little more, and from my understanding this switch enables backup mode that essentially gives the ability to change the acls of a file/folder when the account running robocopy does
not have sufficient privileges, to perform a successful copy.
My question is, when the acls are changed when using this "backup mode" switch, with the /copyall switch, will the file still retain the same user access that it originally had - or does it change all of the security settings?
I'm hoping it will somehow change the security settings, create a copy, and retain the same acls as the original - so users can still access necessary files.
Can someone please explain how this "backup mode" works?
Thanks in advance.

This is a very useful thread with a lot of hostility in it.
I have to agree with Jonathan and hazymat: there are few other forums that will discuss the exact function of /b switch, the TechNet article just says "copies in Backup Mode" (I have the article bookmarked), and when doing a google search, THIS page comes
up as the top result! Kinda difficult to tell people they should go search, when you are the exact destination of that search, isn't it? ;)
No offense to anybody working hard to help out here, but this is why sites like Stack Exchange will overshadow every traditional tech forum very soon. More concise question/answer format, more civil, and they actually encourage old questions developing new
answers! All q&a is cataloged for future reference. Their focus is on being a 'resource'.
The negativity here is unfortunate, you guys have great potential to be a very helpful resource for people. Who are you trying to be, the guys with all the answers, or the guys who say "get out of here, your answer isn't in here. Go search for it."?
Regardless, many thanks to jrv! for helping me with my robocopy batch SCRIPT which I just used to create an automated backup! Take care boys. And yes, I just bumped your old-old thread.
Unfortunately I think you miss the point. RoboCopy is an application. It is not a script. This is a scripting forum. Many people come here nd never read the forum guidelines and do not ask script related questions.
The /b switch is documented in RoboCopy help. Of course it assumes the reader is a trained Windows tech and knows what backup mode is. It is used by nearly all backup software when backing up a live system..
¯\_(ツ)_/¯

Few questions about 3750X stack switch

Dear,
I have just joined this helpful community. Since I am still a newbie, it is my hope to comprehend through our discussions. I would like to ask few questions about 3750X stack switch:
What kind of switches are considered as provisioned switch?
What is the purpose of using provision switch?
Which advantages does a provision switch provide? If we don't use provision feature, what would be happened?
Thank you very much. Look forward to reading your replies.

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Ivan's reference provides the details, but in real world where provisioned switches are nice include: if a switch member fails, that's switch member's configuration is still present and can be used on a like model replacement.
Also: for new stack members, being able to provision the new switch stack, before you add it to the stack, save a little time when you add the stack member to the stack. I.e. you can provision the stack member ahead of time, and then when you add the stack member, as soon as it joins the stack, it has the desired configuration.

Just installed iOS6, questions about "iMessage" and other things...

I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Questions about Indexing and Using an Indexing POA

Although I have only about 50 users, at least 15 of them have in excess of 100,000 messages in their accounts and the POA (version 7.0.2) is regularly slowing to a crawl. (I just know that plans for revolution are fomenting!) I have embarked on a campaign to reduce these accounts by archiving everything off to get mail accounts down to 3000 or fewer pieces. I have achieved user buy-in, but have worked on only a few users so far.
In another closely related thread, it was suggested to me that the PO speed issues relate to broken indexes. And I suspect that given so many messages, the indexes were never getting fully rebuilt with the default QF POA settings. I am trying to fix that situation in addition to reducing mail account sizes. So, I have set up a second POA on another server and dedicated it to the indexing task. The /qfinterval is set for 1 hour, other /qf switches at default. The POA-QF does no mail delivery, but it does do nightly user upkeep.
The POA-QF seems to be steadily working away and making progress at reducing the number of unindexed messages. However, I have questions about what I am seeing and what more I can do:
1. Is the progress I am seeing real progress? For example I have a user with over 100,000 messages to be indexed and every time I check the logs, the count drops by about 500 messages per hourly QF cycle. I assume that if I just let it keep running, it will eventually get caught up and fixed. Not only with this user, but with all the others as well. Will my patience (and theirs) be rewarded? Are there any gotchas I need to prepare for?
2. One user has recently had virtually all of her messages successfully moved to archive. I can see them in the Archive, and do not see them in the online account. However, now over a week later, QF still shows >130,000 items still left to index for that user. The POA-QF is making slow, steady progress reducing that number, but why is this user's QF count still so high? Does it just need more time, or is there something amiss for this user?
3. I may want to rebuild indexes for single users from scratch. I have seen the TID 3105742 which tells how to do this: Essentially you turn off mail delivery functions, and make some other switch changes to dedicate the POA to indexing for just a single user, and then you let the POA rebuild the indexes. The implication of that scenario is that the POA is now enjoying exclusive access to the user's databases.
If I want to use my secondary POA-QF to rebuild a user's index from scratch, does the main POA have to be offline and the user out of GWise? That is, Does the QF process require exclusive access in order to rebuild indexes from scratch?
Thanks for any thoughts or suggestions.
Peter Smick

pgsmick wrote:
> 1. Is the progress I am seeing real progress? For example I have a user with
> over 100,000 messages to be indexed and every time I check the logs, the count
> drops by about 500 messages per hourly QF cycle. I assume that if I just let
> it keep running, it will eventually get caught up and fixed. Not only with
> this user, but with all the others as well. Will my patience (and theirs) be
> rewarded? Are there any gotchas I need to prepare for?
Set this switch for this indexing POA - /qflevel=999 - this will index
everything in one run. It will take a long time, but with no qflevel switch you
are indeed only indexing 500 messages at a time, and if the user has that much
mail, it might never really catch up.
>
> 2. One user has recently had virtually all of her messages successfully moved
> to archive. I can see them in the Archive, and do not see them in the online
> account. However, now over a week later, QF still shows >130,000 items still
> left to index for that user. The POA-QF is making slow, steady progress
> reducing that number, but why is this user's QF count still so high? Does it
> just need more time, or is there something amiss for this user?
>
This is odd, because really the index count should drop to nothing, but with the
above switch this might get resolved as well.
> 3. I may want to rebuild indexes for single users from scratch. I have seen
> the TID 3105742 which tells how to do this: Essentially you turn off mail
> delivery functions, and make some other switch changes to dedicate the POA to
> indexing for just a single user, and then you let the POA rebuild the indexes.
> The implication of that scenario is that the POA is now enjoying exclusive
> access to the user's databases.
Not really - the POA is not enjoying exclusive access to the user's database,
the indexer is just avoiding an attempt to index anything else.
> If I want to use my secondary POA-QF to rebuild a user's index from scratch,
> does the main POA have to be offline and the user out of GWise? That is, Does
> the QF process require exclusive access in order to rebuild indexes from
> scratch?
No - QF never requires exclusive access. That said, you may find that an
extremely vigorous QF can cause slowdowns for the user.
Danita
Novell Knowledge Partner
Moving GroupWise to Linux?
http://www.caledonia.net/gwmove.html

Question about using multiple iPods on the same PC

I've read the FAQs on this subject but I still have a couple of questions about multiple users with separate iPods using the same PC.
I want to use my family's desktop (A new Gateway with Vista, if it matters) for my new iPod Classic, but my father already has an iTunes account on there for his iPod. I know I can create a new user account on the PC and move iTunes to a shared folder so that we can share music, but will this second account be able to purchase music from the iTunes store or am I going to have to switch between Windows User accounts to make purchases and then move new songs into my separate iTunes account via the shared folder? Will it be its own separate iTunes account (separate user name, separate credit card used, etc.) or will it just be a second library that's dependant on the first?
I want to be able to have my own iTunes account, make my own purchases in it, and maybe occasionally share tv shows or something with my father.
If this can't be done, would I be better off just creating new playlists for our two iPods from the same library, or creating a second library on my Father's account?
Also, if I want to access things I've purchased from iTunes on this desktop in iTunes on my notebook, will I be able to?
I hope that made sense.
Sorry if these seem like silly questions. This will be my first iPod as I'm really excited about the 160gig and want to know if these things are possible.
Thanks in advance for any help

Hi, Wes.
Congratulations on your new iPod Classic and Welcome to the Apple Discussions.
For no particular reason, let's answer your last question first ...
... if I want to access things I've purchased from iTunes on this desktop in iTunes on my notebook, will I be able to?
The iTunes Store operates on a one download per purchase policy so you will have to copy the purchases from one computer to the other and make sure that you authorize the laptop to play the songs.
As to your first question ...
... will this second account be able to purchase music from the iTunes store or am I going to have to switch between Windows User accounts to make purchases ...
Whatever XP User Account you are logged in to doesn't really matter. What's important is which Apple Account you sign in to ... yours or your Dad's or - if you had my Apple ID and password - The Mimico Kid's for that matter. You can sign in to any Apple Account on any XP User Account. Or any computer for that matter.
Where the XP User Account comes into play is that it will determine where on your computer the purchases are downloaded. Files will be sent to the iTunes Music folder as specified in the iTunes Edit menu > Preferences > Advanced tab > General sub-tab. Default settings will have a different location for each User Account - C:\Documents and Settings\ user name \My Documents\My Music\iTunes - but if you've read this article in the Apple Knowledge Base, you will know you can change the location of the iTunes Music folder in each XP Account to a common location such as C:\Documents and Settings\All Users\Documents\My Music\iTunes.
Post back if all this hasn't been as clear as mud and you need anything clarified.

Question about silent switch?

Similar Messages

Maybe you are looking for