Question about Slow POST with Creative Fatal1ty Champion on P45T-C51 Board

I have recently installed the above-mentioned sound card on the P45T-C51 MB. I noticed a drastic change in boot up speed as if the MB is searching for something on POST. I am using Win 7 Ultimate 64. The system used to display all my hard drives and USB sources withing seconds of powering up. Now it takes almost a minute before the MB even gets to starting the OS. I have noticed that the new sound card is sharing IRQ 18 with many other devices. Is this the source of my problem? I am posting in this forum as I believe this is a MB issue. There is a more recent BIOS available in July 2010. I am currently using the January update to the 7519. Does this update address these issues? Any help offered would be greatly appreciated!
I am going to post this. Will bring my profile up to speed and repost with system specs.

PAX drivers are the only thing that will make my Creative card run under Win7 Ultimate 64. I tried everything to use the Creative drivers with no luck.
Eureka moment!!! Noticed that a hard drive I wanted some data off of tonight was not responding. It's an 11 year old WD 200GB drive, one of the first big drives. It has finally failed!! Reached in and sure enough the drive was smokin hot. Unplugged the power supply to it. Tried to plug it back in (HOT) and my power supply over-current tripped and shut down the computer. Never seen that happen before! With the hard drive disconnected POST is right quick now and the problem seems to be solved. This POST problem has been happening since mid-December, same time I put the sound card in...this means that drive has been failing since then but today it finally gave up. Good job I decided to vacuum a lot of data off of it just this weekend, I actually had it pretty busy. Guess that was the straw that broke the camels back. It was my last IDE drive. Guess I am going to have to go out and get another huge new SATA drive to take it's place...AWWW...Darn!!
Thanks for the help. We were not going to find that easily without a complete failure of the drive...which finally happened. Any other problems in the future I will be definitely be coming back to this forum to find knowledgeable answers!

Similar Messages

Question about Depreciation Posting Run

I Gurus:
I have a question about Depreciation Posting Run; I want to block two active assets for not entry in the Depreciation Posting Run and don´t affected it.
I try to blocked the fixed asset in AS06 transaction but de active asset is affected in Depreciation Posting Run.
Could you please help me??
Thanks a lot

Hi,
To my limited knowledge, one can deactivate the assets after transfering the value from the to be deactivated asset.
As per the generally accepted accounting principles, assets with value should have an impact in our financial statment. In SAP, deactivating assets means, wrongly created assets which will not have any value and will not have impact any of your financial books of accounts.
I think, you are looking for a functionality, where you do not want to depreciate the assets (ex. Land). If it is so, you can give the Zero percentage by creating a new dep. key if you are using depreciation key based calculation of depreciation.
Hope it clears your doubt,
Regards
A.Saravanan.

A question about a method with generic bounded type parameter

Hello everybody,
Sorry, if I ask a question which seems basic, but
I'm new to generic types. My problem is about a method
with a bounded type parameter. Consider the following
situation:
abstract class A{     }
class B extends A{     }
abstract class C
     public abstract <T extends A> T someMethod();
public class Test extends C
     public <T extends A> T someMethod()
          return new B();
}What I want to do inside the method someMethod in the class Test, is to
return an instance of the class B.
Normally, I'm supposed to be able to do that, because an instance of
B is also an instance of A (because B extends A).
However I cannot compile this program, and here is the error message:
Test.java:16: incompatible types
found   : B
required: T
                return new B();
                       ^
1 errorany idea?
many thanks,

Hello again,
First of all, thank you very much for all the answers. After I posted the comment, I worked on the program
and I understood that in fact, as spoon_ says the only returned value can be null.
I'm agree that I asked you a very strange (and a bit stupid) question. Actually, during recent months,
I have been working with cryptography API Core in Java. I understood that there are classes and
interfaces for defining keys and key factories specification, such as KeySpec (interface) and
KeyFactorySpi (abstract class). I wanted to have some experience with these classes in order to
understand them better. So I created a class implementing the interface KeySpec, following by a
corresponding Key subclass (with some XOR algorithm that I defined myself) and everything was
compiled (JDK 1.6) and worked perfectly. Except that, when I wanted to implement a factory spi
for my classes, I saw for the first time this strange method header:
protected abstract <T extends KeySpec> T engineGetKeySpec
(Key key, Class<T> keySpec) throws InvalidKeySpecExceptionThat's why yesterday, I gave you a similar example with the classes A, B, ...
in order to not to open a complicated security discussion but just to explain the ambiguous
part for me, that is, the use of T generic parameter.
The abstract class KeyFactorySpi was defined by Sun Microsystem, in order to give to security
providers, the possibility to implement cryptography services and algorithms according to a given
RFC (or whatever technical document). The methods in this class are invoked inside the
KeyFactory class (If you have installed the JDK sources provided by Sun, You can
verify this, by looking the source code of the KeyFactory class.) So here the T parameter is a
key specification, that is, a class that implements the interface KeySpec and this class is often
defined by the provider and not Sun.
stefan.schulz wrote:
>
If you define the method to return some bound T that extends A, you cannot
return a B, because T would be declared externally at invocation time.
The definition of T as is does not make sense at all.>
He is absolutely right about that, but the problem is, as I said, here we are
talking about the implementation and not the invocation. The implementation is done
by the provider whereas the invocation is done by Sun in the class KeyFactory.
So there are completely separated.
Therefore I wonder, how a provider can finally impelment this method??
Besides, dannyyates wrote
>
Find whoever wrote the signature and shoot them. Then rewrite their code.
Actually, before you shoot them, ask them what they were trying to achieve that
is different from my first suggestion!
>
As I said, I didn't choose this method header and I'm completely agree
with your suggestion, the following method header will do the job very well
protected abstract KeySpec engineGetKeySpec (Key key, KeySpec key_spec)
throws InvalidKeySpecException and personally I don't see any interest in using a generic bounded parameter T
in this method header definition.
Once agin, thanks a lot for the answers.

Questions about PDF exporting with InDe CS5.5

Hey all,
A couple questions about exporting to PDF from the latest version of InDe.
First, I have noticed that it seems to take a lot longer to get to a PDF. Any suggestions for how to speed up the process? It took 8 minutes or so to generate a low-res PDF (for print) of a 24pp document with a few placed images and vector graphics. Wow, that's a long time to wait, especially for a proof.
Second, the background task... if I get it going on making that 8-minute PDF and then work some more on the document, what exactly is in the PDF? Usually I save before making a PDF or printing. So, is the last version saved what will be in the PDF?
(As an aside, this ability to work on the doc while generating a PDF seems kind of weird. Generally one makes a PDF for proofing, or even for printing, when all the changes have been made and everything is "final". So, I see no benefit to being able to work on my document while it's making a PDF, as I'm probably finished making revisions for the time being. I have to say that I kind of like the progress bar you get when you make an interactive PDF, as you know you can't work on the document when that's on the screen... )
Thanks as always.

First, I have noticed that it seems to take a lot longer to get to a PDF. Any suggestions for how to speed up the process? It took 8 minutes or so to generate a low-res PDF (for print) of a 24pp document with a few placed images and vector graphics. Wow, that's a long time to wait, especially for a proof.
Yes, this is abnormally long (and too long), something is wrong. What's the full version of InDesign you are running, as reported by holding down Cmd or Control and selecting About InDesign?
Second, the background task... if I get it going on making that 8-minute PDF and then work some more on the document, what exactly is in the PDF? Usually I save before making a PDF or printing. So, is the last version saved what will be in the PDF?
Saving is not related. InDesign makes a database snapshot of your document the moment you begin the PDF export, and makes the export relative to that snapshot, regardless of edits you continue to make during the export process, and regardless of saving. Of course saving first is a good idea, for several reasons, not the least of which it sounds like something's fairly seriously wrong with your document or your InDesign installation.
We recommend you trash your preferences and export your document to IDML and see if either of those things changes this 8-minute behavior...err, assuming you're running 7.5.2.318.
(As an aside, this ability to work on the doc while generating a PDF seems kind of weird. Generally one makes a PDF for proofing, or even for printing, when all the changes have been made and everything is "final". So, I see no benefit to being able to work on my document while it's making a PDF, as I'm probably finished making revisions for the time being. I have to say that I kind of like the progress bar you get when you make an interactive PDF, as you know you can't work on the document when that's on the screen... )
Yeah, I think the primary benefit is if you are likely to work on 2 or more files in parallel, so you can finish A and export A and then switch to B. If you'd like a dialog box to pop up when export is done, check out my exportPop script from this post: ANN: automatic dialog after background export (exportPop.jsx.

Question about Logon ticket with user mapping at BI-JAVA environment

We're implementing BI 7.0 including BI Java and SAP EP for end user
access.
I have two question about SSO method when we're using BI Java.
I know we can simply configure SSO logon ticket with BI-Java(EP
included) and BI-ABAP through BI template installer and we already
succeeded in that case.
But the problem is we want to change it to user mapping SSO method for
some our internal reason.
After we configure user mapping SSO, we've got SSO failed error when we
call BI-Java stuff like BEx Web Application iView.
After many testing implemented, we found SSO Logon ticket with user
mapping (using SAP reference system). It seems working now.
But our question is "Is it no problem when we use SSO logon ticket with
user mapping?" Is there any restriction or issue?
One more question is we can ONLY use user base mapping when reference
system used. How can we assign BI-ABAP users to EP Group?

Using an SAP Reference system is allright. But if the reason u r going for this is because of different usernames in EP and BI, why dont you go for user mapping.
Anyways, on restriction of reference syetms is that you can have ONLY ONE reference system defined in portal. In you case you can only have the BI system defined.
Hope this helps!!

Questions about supporting TLF with Halo components in Flex 4.1

We recently decided to upgrade to the Flex 4.1 SDK after a year or so at 3.2. We have been asked to not use the new SPARK components yet because our products would then have a mistmatch of Halo and Spark components in the UI. We have built support for our Halo components to display html through the ".htmlText" property for the Text components. For example, we can display strings such as "<p>Choose <b>one</b> option:</p>". With the upgrade to Flex 4.1 a couple of questions about supporting bi-directional text have come up. My understanding is that in order to support bi-directional text we need to use the Text Layout Framework. Does anyone have a suggestion on how we can utilize the TLF with the Halo components in Flex 4.1? Can we still use the ".htmlText" property somehow or is there a new property that understands the TextFormat markup? We would love to still be able to use the limited html tags that are supported for the "htmlText" property. Is there an option where that syntax is still understood?
Thanks in advance!
David

The halo components use TextField, and the spark components use TLF. Both sets have support for some html markup to import and export text. To use bidi text, you have to use TLF; TextField won't work properly.
It is possible to use TLF to build your own components, and this can work well particularly for applications with specialized needs. But if you need bidi support for advanced components like DataGrid and List, then you should use the spark components.
Thanks!
- robin

Applicationhost.config updates for HTTP Slow Post with Azure Websites

We are trying to update our Azure websites to not show as vulnerable to the HTTP Slow Post vulnerability. Some articles suggest fixing this by updating the applicationHost.config via IIS to update the connection timeout values. Obviously with Azure websites,
we don't have access to IIS. Came across some options with Kudu and XDT to modify the application host file, as outlined on these two sites:
http://azure.microsoft.com/en-us/documentation/articles/web-sites-transform-extend/#transform
http://rtigger.com/blog/2014/03/31/number-til-modifying-you-azure-applicationhost-dot-config
Currently am using the following as our applicationHost.xdt (I have this both in our application root, as well as in a SiteExtensions folder as I wasn't clear which one was required).
<?xml version="1.0"?>
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
<system.applicationHost>
<sites>
<siteDefaults>
<limits connectionTimeout="00:00:30"
xdt:Transform="Insert" />
</siteDefaults>
<applicationDefaults applicationPool="DefaultAppPool" />
<virtualDirectoryDefaults allowSubDirConfig="true" />
</sites>
<webLimits connectionTimeout="00:00:30"
xdt:Transform="Insert" />
</system.applicationHost>
</configuration>
We also set the WEBSITE_PRIVATE_EXTENSIONS app-setting to 1 as instructed.
When testing our site using a 3rd party tool, it appears the setting is not getting applied. Hoping someone can point out where our error may be. Alternatively, is there any way to see what the current applicationHost.config is for our website? I'm curious
if our XDT is correctly being applied, so if we could see what the resulting file was that may also allow us to further troubleshoot.
Thanks in advance for any advise!

Please see
this page, which has detailed steps on finding your applicationhost.config and finding the logs from the transformation. And please make sure that your applicationhost.xdt is in your
d:\home\site folder (and not in your site\wwwroot).
David

A few questions about using PS3 with 27" iMac display...

Hey people, I had a few questions about how I could possibly get my ps3 connected to the iMac's 27" screen. First of all, could you guys list some adapters that would be able to convert the HDMI to Mini displayport? That would be great. The only one I know of is that Dr. Bott Digital Video link.
Okay secondly, I was wondering if I do get the the ps3 connected with the iMac's display with an adapter to convert HDMI to mini DisplayPort, would it be in HD? Would I be able to play ps3 games or watch blu-ray movies in 1080p HD format?
Thanks!

Welcome to the Apple Discussions!
This has been asked a number of times here since the intro of the 27" iMac. The answer is very expensive US$149 or more converters and sometimes even more expensive to maintain the resolutions that you seek.
http://lowendmac.com/ed/bashur/09db/dvi-to-mini-displayport.html
Dah•veed

Question about 360 movieclip with cursor action

Hello Flash Forum
We have a question about a 360 flash / movieclip which comes
to a halt or jumps to whereever the cursor is moved horizontally
while any vertical movements is ignored. We are having difficulties
to implement this and would like to ask whether someone can point
us into the right direction in Flash 8 - read somewhere that this
is extremely easy in Flash 8 but we cannot find out how!?
An example would be:
http://www.kswiss.com/cgi-bin/kswiss/store/product_detail.html?mv_arg=x&pid=01190:177
and then chosing 'Go 360'
Thank you for any assistance and/or direction.
Alex

Alex, took a look at your sample - looks to me like
start_drag and stop_drag on mouse_over. Hope this helps. ash

Questions about slow motion recording on the iPhone 6 Plus

I took a couple of slo mo videos and they look cool, but there are a few things I don't understand.
The frame rate I took them at is 240 fps.
In an online article, I read the slow down speed is just 1/4th. But if the regular frame rate is 30 fps isn't the slow down 1/8th? I think that is true, because a video in the "recent" album says "8 seconds" but actually plays back at 64 seconds, which is 1/8th speed. And it's 64 seconds long after I upload it to YouTube.
One question is whether there is an easy way to see the actual playback time other than doing the math?
Another question is I understand there is supposed to be some way of editing the videos so you can adjust which parts are slowed down and which parts aren't. I can see how to trim, and I see the narrowly spaced bars (normal speed) and widely spaced bars (slow speed) but I don't see any way of adjusting those.
Any hints about this? Or other slo mo recording any editing hints?
Thanks,
doug

End result after talking with AppleCare.
1. Yes, if you record at 240 fps it is 1/8th speed.
2. There is no way in either Photos or iMovie on the iPhone to see the playback time! Just the time it took to record the video.
Doesn't it seem that people would want to know the playback time of a video?
I have submitted feedback.
I figured out how to edit the spacing of the real-time vs slo-mo portions. So that's no problem. But there is no way of knowing what the playback time is other than editing it on your computer or uploading it to YouTube or some place like that and see the result. Or manually timing it I guess.
doug

Question about accessing CIFS with LUM user (permissions)

Hi there,
I have a question related to accessing a CIFS mount throught a user in a linux box.
First of all, its a system based in OES11 sp2 & SLES 11 SP3. I have a cifs mount
in /media/nss, with novell cifs, coming from a NSS Filesystem. This mount is mounted
with a username/password with password policy, etc. I have four users LUM-enabled,
in the Linux box, which should access the CIFS mount, but I have a permission denied.
I have set trustees for the primary group for the 4 lum-enabled users and also I have
addedd permissions for a group in the NSS volume, and add this group to the membership
of the users, but doesnt works.
I guess Im missing something or Im doing something wrong. Could anybody give me a pointer?
Thanks!

Antoniogutierrez,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Flash newbie questions about slow loading site

Hi all. I am new to Flash and web-site building in general and I have been learning while doing. Its fun, but frustrating. I really need some help, hope someone out there with Flash experience can give me some advice.
My problem is this: I built a Flash website, but it is painfully slow to load up (3-5 minutes via cable modem) when I visit the site (via Firefox, etc). Once it does load up, everything is fine with navigation. I'm having a hard time figuring out why its taking so long to load up on the web because, basically, I don't know how to trouble shoot. Hope you guys can help!
Details: the site is just a portfolio site with pictures and a few motion-things, no complicated animations. The swf file is about 9MB. I do have a flash preloader, but it doesn't show up until after the 3-5 minute "load-up" time. When I do the testing via Flash, its Ok and doesn't show the lag. But once I upload the website files and try to visit my website, the load time problem occurs.
My thoughts:
- do I have to purge my Flash file/library of unused images before creating my swf file?
- Is there a problem with my html code in my index file?
- because it is a portfolio site, I've got about 90 images on it, each image about 300-400K. Is this too big, or about right?
Please help! Sorry for the long email, just desperate for help. Thanks in advance for any advise!!!! Just in case, here is the html code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Acme Company</title>
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<style type="text/css">

</style>
<link href="favicon.ico" rel="icon" />
</head>
<center>
<body>
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','800','heigh t','600','title','Acme Company','vspace','100','src','development files/company site_AS2_2008 OCT_final','loop','false','quality','high','plugin spage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','bgco lor','#000000','scale','exactfit','movie','develop ment files/company site_AS2_2008 OCT_final' ); //end AC code
</script><noscript><object classid="clsid27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="800" height="600" vspace="100" title="Acme Company">
<param name="movie" value="development files/comapny site_AS2_2008 OCT_final.swf" />
<param name="quality" value="high" /><param name="BGCOLOR" value="#000000" /><param name="LOOP" value="false" /><param name="SCALE" value="exactfit" />
<embed src="development files/company site_AS2_2008 OCT_final.swf" width="800" height="600" vspace="100" loop="false" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" bgcolor="#000000" scale="exactfit"></embed>
</object></noscript>

Yeah I'm with Ned on this one. Dynamically loading your images is the way to go. The fact that you are new to Flash, try this tutorial (http://www.entheosweb.com/Flash/loading_external_images.asp). As you move along in learning Flash, look for tutorials on actionscript arrays and loading images dynamically. Arrays allow you to call each images from a folder outside your fla. That way your site moves right along without much loading time.
Hope I was of help,
-Sly

[Solved] A note and question about slow hostname lookups

I reinstalled Arch recently and the first thing I noticed was slow resolve times on hostname lookups. This didn't happen on all webpages but did on about 50% of them. This also happened on downloads from pacman %100 percent of the time. I have done a good bit of research and most of the points led to nssswich. One website said to try using this in nsswitch.conf:
hosts: files[NOTFOUND=continue UNAVAIL=continue] dns [NOTFOUND=continue UNAVAIL=continue TRYAGAIN=return] nis
With this it appears (after about 20 minutes of testing) that firefox lookups are again behaving normal again. However, pacman is still having slow lookups (about 30 seconds for each package). Does anyone know what could be the problem here. I dont' know much about nsswitch or how it could be the problem. Is there a way to help return pacman to regular lookup times?
Last edited by Gen2ly (2010-11-05 18:13:34)

Yeah, no problem.
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost pavilion
# End of file
# The Hosts File Project http://hostsfile.mine.nu
# Global Advert Servers Blocklist - Personal Edition
# Release 2010-1-26
# Servers Verified as up and running 2010-1-26 (by dns exploration)
# Updated sorted and maintained by Andrew Short (sh0rtie)
# Contact: [email protected]
# A big thank you to all contributers (too many to mention)
# who really have made this project a success, well done :)
# Licensed under the LGPL a copy of the license may be viewed at
# http://www.gnu.org/licenses/lgpl.txt
# WARNING:
# This file is *extremely comprehensive* and some sites might be
# included here that you wish to visit, if this is the case you can
# deactivate the block on that site by placing a # (octothorpe)symbol
# before its entry, this will deactivate blocking on that server
# so for example #127.0.0.1 foobar.com
# will enable you to visit foobar.com or you can just simply delete
# the line that contains the site you wish to visit.
# NB:
# For some computer software updates you may need to disable
# this file in order to perform the update, if you have problems
# rename this file from "hosts" to "hosts.txt" reboot then perform
# the update and then rename this file back to "hosts" to re-enable it
# You must keep the below lines
127.0.0.1 localhost
127.0.0.1 007arcadegames.com
127.0.0.1 00fun.com
127.0.0.1 00inkjets.com
127.0.0.1 00pro.com
127.0.0.1 00web.com
I use the hosts files to to block advertisements which is the stuff trailing on the end and continuing. Think there might be a problemt here?

Question about using RE1000 with EA6500

I have an EA6500 route but having problem getting wireless signal to one room in my house. As a result, I am thinking about buying RE1000.
If I buy this unit, will I need to connect to a different network when using wireless devices in the room near the extender.
Or will both the extender and router operate as a single wireless network name? If they both operate under a single wireless name, how will I know the extender is connecting and working.
Please let me know. Thanks.

atomarchio wrote:
I have an EA6500 route but having problem getting wireless signal to one room in my house. As a result, I am thinking about buying RE1000.
If I buy this unit, will I need to connect to a different network when using wireless devices in the room near the extender.
Or will both the extender and router operate as a single wireless network name? If they both operate under a single wireless name, how will I know the extender is connecting and working.
Please let me know. Thanks.
Just to answer your question, RE1000 will extend your router's main wireless network - so they will operate with single / same wireless network name. You'll know that the extender is connected and working if you'll be able to see the RE1000 listed on your router's DHCP client's table.
If everyone needs to believe in something, I believe I'll have another beer..

Question about same emails with others

Good afternoon, the other day I walked into
yahoo.com, because I wondered if
I had done earlier account there.
So, when I tried to log in, I chose
that I can not remember my identity
and asked me to write the security email
I would have put in during my
recording time. Me, I put
my mainly EMAIL, which is: [email protected]
After some time I realized that
some unknown had used my email
as security email to his account
on yahoo. Later I checked the
recent activity in my email in hotmail
and indicate places where I have not been
in any of the times I entered my
account. Finally, there are some messages
about verifying my identity to an account
of Apple, which does not come from
me. My question is whether it is possible
to have the same email with
these girls, who have the same name and
the same first letter on their surname
as me?? Thank you in advance!

WLS loads classes from weblogic.class.path property
Refer this document
http://www.weblogic.com/docs51/admindocs/classpath.html
Kumar
Paul Shen wrote:
At first, thanks Jesse for the help. Sorry for my mistake that making
question 3 out of context.
WinNT 4.0 SP6, Weblogic 5.10, SQLServer 7.0
I wanna create a connection pool for SQLServer. At beginning, I
mis-add the JDBC Driver class path to weblogic.class.path. As a result
the pool creating failed. After I add the JDBC Driver class path to
weblogic.class.path and CLASSPATH (by wlconfig), the pool created
succefully.
For testing purpose, I changed weblogic.class.path back, then
restarted NT, started Weblogic Server, to my surprise, the pool was
created as well! How do you think about this?
Paul
On 22 Aug 2000 12:27:28 -0800, [email protected] (Jesse E Tilly)
wrote:
Comments inline...
[email protected] (Paul Shen) wrote in <wS2iOZDX8dSgABq4nblptb+wg7Uz@
4ax.com>:
3. For testing purpose, I changed weblogic.class.path back, then
restarted NT, started Weblogic Server, to my surprise, the pool was
created as well! How do you think about this?This question seems out of context. I do not know what pool you are
referring to, nor the actions prior to changing the classpath.
Jesse

Question about Slow POST with Creative Fatal1ty Champion on P45T-C51 Board

Similar Messages

Maybe you are looking for