Question about sony NFC tags

Hi every body,
I have a little question about the NT1 smart tags of sony.
I installed other app from google play to NFC tags in my phone.
I installed it, because the smart tag app of sony, don't have the action to turn on or turn off the GPS by NFC tag.
When I used with other app, and I written on the blue smart tag, I mark to became the blue smart tag to read only.
So, now I can't to write on him, and the phone is not recognazied the blue smart tag ( all other smarts tags is OK, because I didn't used them ).
When I scan the blue smart tag, the phone show a message: "unknown type tag".
Am I can cancelled it and became it back? that's mean that the phone is recognaized it and I can to write on it?
Or, is it one way, and I can't used with the blue smart tag again?
Thank you.

you can do a factory reset or repair your phone with SUS
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
Don't forget to mark the Correct Answers & Helpful Answers
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

Question about BC4J data tags, Oracle sessions and Locking!

Hi ,
I have seen numerous examples of JSPs using data tags and in all the examples the data tag for the application module has the "username" and "password" harcoded in it.
My questions are:
1) For a stateful application should we be including the username and password in every JSP page. I personally believe that we should not.
2) If we have a username and password in every JSP page will it not start a new ORACLE user session and if so will it not cause locking problems?
3) If we don't hard code the username and password in every JSP page, will it reuse the same ORACLE session ?
4) How do we avoid locking problems when we use data tags?
5)I can understand the inclusion of username and password in every JSP page if it is a stateless application but again Is there a way we can avoid hardcoding the username and password in every single page?
I would appreciate if some one can let me know if any of my assumptions are incorrect.
JDeveloper Team/Juan any advice?

The username and password are optional. They can be provided via the connections.properties file. The multple entries for username and password don't mean that separate connection are made. The first time the ApplicationModule tag is encountered, your application instance is created. If you are running in reserved mode (look at your releasePageResources tag) the application instance is kept until your Http session times out. If you are running in Stateful or Stateless mode, you application instance is returned to the application pool and retrieved the next time you need an instance. Please refer to the application pool documentation and to the source in oracle\jbo\common\ampool provided in jbohtmlsrc.zip.

Question about "Convert ID3 Tags" command

I just used "Convert ID3 Tag" to convert all the songs in a library to ID3v2.4. When it was done, abotu half the album art had been killed. I have a backup, so nothing is lost, but I did not expect this to happen. My questions: (1) Is this expected behavior or a bug?, and (2) Any ideas why some album art survived and some did not?

Thank you! I actually managed to figure it out myself before you replied.
For anyone else out there who might be interested:
Change the import settings in iTunes > Preferences > General, to Apple Lossless Encoder. Then you can select the files/albums you want to convert, and click on the Advanced menu while holding down the Options/Alt-key, and click "Create Apple Lossless Version". I found that it doesn't actually convert the existing WAV-files, but creates an Apple Lossless copy of every single file, so I had to spend some time weeding out the WAV-files afterwards. This is a one-time effort, though, as every CD will be imported as Apple Lossless from now on.
Better still, solved my problem with the album artwork!

Question about Sony - Earbud Headphones - Black

Hello BestBuy Team... i was wandering if the Sony - Earbud Headphones - Black
I see there is a Compatibility with Apple iPhone... but i'm interested if it's compatible with Apple iPhone 2g (the first generation iPhone)
It wouldn't even be important to me if the controls worked, only the microphone is important to me...
Thank You in advance.
Boris Dusnoki
Sony Earbud Headphones - Black
Model: DRE10IP/BLK | SKU: 9794884
With a built-in Apple® iPod® and iPhone® remote and a built-in in-line microphone for iPhone, these earbud headphones make it easy to control your music and chat on the phone.
4 Read reviews (1)
Sale: $29.99

I'm very confused by those. The jack clearly only has 3 inputs, meaning, left, right, center, and look to only be headphones, not a headset.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Question about changing xml tags in your RSS feed

If I were to change the "author" of my podcast (namewise) - would that mess up the feed for anyone subscribed? I'm not sure what end users see or experience.
<itunes:name>element
So I I switch this to a different name - does that mess up existing subscribers in any way?
Thanks!

No: subscribers identify the feed by its URL and any changes you make to tags will simply appear for them. Changes will appear in the iTunes Store after a delay of a couple of days or so, but immediately for subscribers.

Question About Sony Handycam Mini DVD + iMac

A friend recently asked me how she can compile all her half-hour long mini DVD's onto one normal sized DVD. She said she has tried several things but couldn't do it. I have a Sony mini DV recorder and thought I might be able to import the video from her camera the same way I import from mine to my iMac then burn it onto a disc. But I am not able to hook the camera to my iMac because there's no port for a firewire or a USB connection on the camera itself. Any ideas for how I can consolidate these smaller discs onto one DVD?
Thanks

MiniDV (little cassette tapes) or Mini-DVD (miniature optical disks you can stick in a set-top DVD player and playback)?
The former is the format that you would use if you intended to edit the video, and the latter is the format you'd use if you simply wanted to playback the video as it had been recorded without modification. They are not compatible formats as the physical media is different, but so is the data stored on those media.
A MiniDV camera minimally has an i.Link / mini-FireWire400 port on it for data transfer to the computer. The computer can control the camera through this port, use it either as a live camera, or operate it as a VCR and capture the video as it plays back into the computer. MiniDV video is captured real-time from the camera, meaning that if you recorded 60 minutes of video, it will take 60 minutes to transfer to the computer. The capture data will be in DV format, which is effectively uncompressed 720x480 at 29.995 frames per second (for camcorders using the US' NTSC standard video resolution anyway).
On a Mini-DVD camcorder, the camera may not have a port for connecting the camera to a computer to transfer the video. If it does, it is probably a USB or mini-USB port that allows the camera to be used by a computer as an external DVD recorder. If it is a without-connector model, transferring video would mean taking the mini-DVD out of the camera and putting it in a computer -- however Macs cannot take the mini disks and require and external DVD drive to read them. The MPEG2-encoded video on the DVD drive is highly compressed and not really suitable for editing. Manipulation of the content will necessarily degrade it, so you will lose video quality in the process of handling it, reencoding it, and reburning it.

Question about cfschedule task tag

When I run my code it says I must have a task defined for the
cfschedule to work however how where/what do I use for this task
name? Do I use the file name where my httprequest file is or what
do I need in this field?

Here is what I have:
<cfschedule action="run" task="SendOrder" interval="once"
operation = "HTTPRequest" url = "
Http://www.blah.com" startDate =
"3/04/09" startTime = "11:50 AM"
>

Question about the Documentation Tags for Source Code

Hello,
I have a question about CVI's automatic source code documentation. My problem is that is seems like you need to write all documentation for a specific tag on one line. If you don't, a line break will be inserted when the documentation is displayed. Suppose I want to write a large amount of documentation for the function itself, using the HIFN tag. If I don't want linebreaks to be forced in the documentation, I need to write all this documentation on one single line, which kinda messes up my code. If I split the documentation over several HIFN tags, the documentation displayed to the user might look messed up because of all the linebreaks. Is there any escape character I can put at the end of a line, allowing me to split the documentation of several HIFN lines without forcing linebreaks in the documentation?
Thanks!
GEMIDIS - Innovating Display Technology
HQ Ghent, Belgium

This information is certainly useful. Note, however, that it can also be found in the documentation
Tag
Description
/// HIFN help text
Specifies the help text for the function. Use multiple /// HIFN tags to display help text for the function on separate lines. To separate help text with an empty line, use /// HIFN on a line by itself. You also can use HTML tags, but you must enclose the tags in <HTML><BODY></BODY></HTML> tags.
Example
/// HIFN SampleFunction returns the value of a control.
int SampleFunction (int controlID, ctrlType controlType, char label[], double *value)
SomeAction;

Question about Id3-tags and song managem

Hello, I am getting ready to buy a Zen Touch 20GB in a couple of weeks and I have a few questions about the management software.
(Correct me if I am wrong about something)
) Are songs organized into groups by Genre instead of just folders like on the Ipod?
2) Are Id3-tags used instead of filename for identification?
3) What parts of the tag are needed besides title and artist?
4) Which version of tags does the Zen Touch recognize: Version or Version 2?
5) If I edit my tags using an external program such as Id3-TagIT, will the tags carry over to the Creative software and to the player?
Thanks a lot for your help. I want to make sure I have my music collection in order before I get my Zen Touch.

euph_jay wrote:Ok, so lets say I have all my music in folders right now seperated into different categories on my hard dri've. Some folders denote the artist, some the album, and some a genre. Example: Folder: Chicago Contents: Chicago .mp3 files Folder: Techno Contents: various Techno artist's songs What is the best way of organizing my folder system, so that the transition will be easy to the player?
Folders are pretty much irrelevant. What the software will do is look at the *tags* in the files and then use these to build the player's library.
Will imbedded folders work on the player? (like Techno->Crystal Method->Cystal Method .mp3's)
Again the player has no concept of folders, although if you set Techno as a Genre tag you will be able to view via this in the Music Library.
Or, am I misunderstanding how music is stored into the mp3 player. Instead of storing music in a "folder like" system (like the Chicago folder or Techno folder), does it store all the songs individually on the device? Then you have to sort it by artist, album, or genre?
Using your example, in the Music Library you have essentially three categories: Album, Artist, and Genre. So under Album you would see "Vegas" (the Crystal Method's album), under Artist you would see "The Crystal Method", and under Genre you would see "Techno" (and then either the album or artist under this... I forget which it is offhand).
Make sense?

I want to question about the official service at the service center of Sony.

I want to question about the official service at the service center of Sony.
long since I like the models and items sony. from start playstation, cameras, camcorders up, I've ever had. and a new camera that I bought two years ie compact cameras Sony Cybershot DSC H200. as of a month ago, a camera was having problems in lenses that would not close. and setting the automatic mode to move by itself. I came to the Sony Service Center in Makassar, precisely on Jl. Shop Pengayomann A5 / 05 (0411) 442340.
operator initially said only two weeks to work on my camera. but this week has been more dau even want to go in a month tomorrow, dated July 9, no news from the service center. and I kept the call to the office service. as well as assorted reasons. there are no spare parts or technical constraints, and the last one I call to his office, he said the factory spare part is damaged. imported directly from Singapore. I think, ko new spare part it can be damaged before using that? how the quality of this Sony spare part? ugly? not good? why?
I was disappointed with this situation, where soon it will Eid, want to return home as well to Java. but the camera has not been settled workmanship?
nah, roughly what is the solution of the Sony plagued with this problem? please help, because he did not know to whom to complain. operator had just said: it's up to the father alone.
once again I asked for his help. solution. if you can before Eid arrived.
Thank you,
AD. Rusmianto

Hi awwee107,
Welcome to the Sony Community!
We have forwarded your query to the relevant team for their further assistance and someone from local CC will contact you.
Thanks!

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

NFC tags read/write operations on low level

Hi,
I know this is little bit offtopic question - but since you are experts in the area I will try to ask you probably a pretty simple question:
1/ I would like to know which protocol is used for the read/write operations to the NFC tags are used. According to my understanding after the tag is placed on the NFC reader (NFC phone, USB reader), it is powered and set to the ready state. Then the application protocol for read/write operation is used. As I think the exact format and the content of commands used for read/write is not specified in ISO 14443 and it is dependent on a tag hardware/manufacturer and will be different for FeliCa/Mifare/Innovision/etc. tags, so there is no way how to handle NFC tags read/write operations with the single implementation. Is that assumption correct?
2/ Are there any tags, which supports the APDU 7816-4 commands for read/write operations?
Thank you for reply
Kind regards,
STeN

hello,
you have to read the NFC forum specs. all of this will be better explained than by me.
more than one protocol are used according the the contactless front end configuration and abilities. It includes ISO14443-A, ISO14443-B and Felica. Sometimes other protocols are also available, for example Innovatron (not Innovision lol)
Mifare is not a protocol, it is a line of NXP products. These products use the lower layers of the ISO14443-A protocol specification.
There are 4 types of tags
1) using the lower layers of ISO14443-A
2) using the lower layers of ISO14443-B
3) something related to felica?
not sure exactly about these 3, you have to read the specs. Everything is clearly understandable, not like ETSI.
4) something using ISO7816-4 commands on top of ISO14443 A or B or others. You have SELECT, READ BINARY, UPDATE BINARY. You can implement that using javacard, I did it and it works. You need two binary files, that can be hardcoded.
Regards
Sebastien

What types of NFC tags does the Lumia 920 support?

I bought some Mifare Classic 1k tags online hoping I could write and read some custom tags with the few apps on the marketplace but it doesn't seem the Nokia interacts with them well.
I found this on wikipedia.
"At the moment BlackBerry phones and the Nokia Lumia 610 can't read/write Tectile stickers ". (which are apparently based on Mifare Classic.)
I have found no other mention of what types of tags are supported, so that is my question. What types of tags are guaranteed to work with the 920?

I've run some NFC tests with the 920 because I run an NFC marketing platform.
I wrote a review about the Lumia 920 NFC implementation http://www.tagonic.com/latest/easyblog/entry/nokia-lumia-920
Although this doesn't cover specific NFC tags I can confirm that it works well with MiFare UL tags. The use case of receiving a contact directly, and directing to web destinations works well.
Interestingly we haven't managed to successfully initiate a pairing with other NFC accessories (BH505 headphones or the 360 Speaker) at all. We'd be interested to know if anyone else has this issue.
But from a tag perspective we are confident that the Lumia 920 works with the MiFare UL tags.
Feel free to contact us at [email protected] if you are looking for some tags that you want to program to go to a web destination. We'd supply them pre-programmed and you can virtually re-program them using the platform as opposed to having to physically re-write the tags.

Questions about Rooting...

Hi everyone, I’ve some questions about rooting my Xperia Arc S. Hopefully I’ll get helpful answers from you.
If I root my phone, shall I get regular software official updates from Sony?
Currently Sony is rolling out the ICS update. After rooting the phone am I able to upgrade my phone to ICS?
While rooting the phone if any damage is done, can that be recoverable by installing a fresh OS or something?
Does the rooting process delete all the existing contacts, messages, apps etc?
Finally can anyone please provide a full proof guide/tutorial for rooting the Xperia Arc S?
Thanks in advance.
Solved!
Go to Solution.

Do you have an app named Super USer ?
Were you on 4.0.4 and then rooted your mobile using this method ?
If yes then your mobile is not rooted for sure
See how to root 4.0.4 here
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Question about Video Cards on Laptops

Hi everyone, and sorry if I post this in the wrong area. I own a few computers, some are consider ancient and others are somewhat old but can run Windows XP just fine. I have a question about the computers in the stores today.
I am looking to invest in a new laptop, possibly a desktop in the near future depending on my budget. The question I have about video cards today is that, I enjoy a good MMO game now and then, I don't expect to play heavy intensive games, just maybe some more advance games. I notice that for one game that I want to play, it requires a video card to have (Shadow Rendering, Vertex and Pixle Shaders). Do the computers today have those as standard for thier video card? Or do I have to invest in a little bit more expensive laptop/desktop. I am willing to invest money for some more RAM, if I need to improve its preformance. The reason I ask is because I have a 4 year old Laptop with a broken keyboard, and I was thinking about just replacing the laptop with a newer one. it has some pretty good specs and runs everything fine, but it can not play certain games because of those missing video requirements. (Current laptop incase someone is curious: 1.5Ghz Celeron M, 1GB memory 64MB video (Shared) ) Thanks to anyone who has the answer to this question. (P.S sorry if everything is scrunched together. for some reason the formatting is wierd on Opera web browser

Graphics cards have all those standard today... or at least they should unless you get a really cheap Graphics card. The kind of graphics card and processor and other specs of the computer you want to get should depend on what you want to do with it. It also depends on the kind of games you want to play. If you're playing FPS [first person shooter] then you need a really good graphics card and processor. If you're playing something like Diablo 2 or something that's on the lower end of graphics then you just need decent specs. Graphics cards, I suggest something with aGeForce Nividia card... as of today, they are in the 9 series for high-end cards I believe. For processors... get something like Intel Core 2 Duo T9500 or T9600 or the Core 2 Quatros or Extremes. Extremes are intended for hardcore gaming and would be more expensive. For RAM you should have at least 2GB... you can always upgrade that later.
For laptops my suggestions are:
$3k+ get a customized alienware
$2-3 get a customized dell xps, or macbook pro [although if you're gaming i would suggest you dual boot with windows xp or vista]
$1-2k get a cheaper customized dell, or sony vaio
under $1k... well I don't know what to say... you can't really get a nice gaming computer for under that price.
I personally DO NOT like HP computers at all because they are so quirky and have so many problems and break down easily.

Question about sony NFC tags

Similar Messages

Maybe you are looking for