Question about sorting of items...

...when their perspective is published as a portlet. We have a perspective published as a portlet, and the items are seemingly sorted in some random order. How are these items sorted? Thanks for the help.

I assume you're using Portal 3.0. There's not much you can do to control the sorting in the category or perspective portlets. In Portal Release 2, the custom search portlet replaces the category/perspective portlets and gives you additional control, including control over the sort order if you don't have Oracle Text enabled.
As a workaround, you could write a custom report or dynamic page using the content area views to display content anyway you want.
Regards,
Jerry
Portal PM

Similar Messages

Question about sorting files in media library

Hey,
I'm Sam Hoste from Belgium and I have a question about sorting music files in my media library in iTunes.
My music collection mainly exists of complete albums instead of individual songs. The problem is that I can not play the songs of an album in the same order as on the tracklist of the album in the media library of iTunes.
I also take very good care of the ID3 tags from my mp3-files, but that doesn't help.
For example, if I had an album with the following tracklist,
01. Artist - Song 1
02. Artist - Song 2
03. Artist - Song 3
04. Artist ft Otherartist - Song 4
05. Artist ft Otherartist - Song 5
06. Artist - Song 6
07. Artist - Song 7,
every music file would have an ID3 tag for tracknumber (1, 2, 3, ...), an ID3 tag for artist ("Artist" or "Artist ft Otherartist"), an ID3 tag for title (Song 1, ...) and an ID3 tag for album ("Albumname").
When I load this album in my media library in iTunes, I cannot get them sorted by album and by tracknumber on that album. When I sort by artist I get this list:
01. Artist - Song 1
02. Artist - Song 2
03. Artist - Song 3
06. Artist - Song 6
07. Artist - Song 7
04. Artist ft Otherartist - Song 4
05. Artist ft Otherartist - Song 5.
But that's normal, but even if I sort by album I get the same list:
01. Artist - Song 1
02. Artist - Song 2
03. Artist - Song 3
06. Artist - Song 6
07. Artist - Song 7
04. Artist ft Otherartist - Song 4
05. Artist ft Otherartist - Song 5.
So the songs aren't in the same order as they are supposed to be on the CD. And I would really like my albums to play in the same order than on the tracklist on the CD.
I think the problem is caused by the fact that when you sort by "album" in iTunes media library, iTunes first sorts by albumname, and second by artistname, and third by tracknumber. In stead of sorting first by albumname, and then second by tracknumber in stead of the artist.
My question: Is there a way to make sure iTunes sorts by albumname, and then by tracknumber in stead of artist, so I can play my albums in the same order as on the CD? Or is there an other solution for this issue?
Thanks and kind regards,
Sam Hoste

See my previous post on Grouping Tracks Into Albums, in particular the topics Use an album friendly view and
Tracks out of sequence.
tt2

Short questions about the focused item

Hi,
Short questions about the focused item:
- How can I check if a specific item has the focus?
- How can I check in my code which arbitrary item on my form has the focus?
I need to know this because I have a checkbox and when it become unchecked, I disable an item on my form. But when this item has the focus, disabling this item will fail. Does anyone knows a solution for this problem?
Greetz
Eddy

Hi Eddy!
I suppose you should make an "event trigger" for the event "et_GOT_FOCUS" in your ItemEvent-handler and store there the item, which initiate that event. It can be like following:
SBOApp_ItemEvent(FormUID, pVal, BubbleEvent)
if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_GOT_FOCUS)
   strCurrItemInFocus = pVal.ItemUID;
do someth..
if (strCurrItemInFocus == "chbxMyCheckbox1")
   // disabling this item will fail
else
   // disable an item on my form
I hope it helps..

2 questions about Dropdown Box Item

Hi all,
I just started using Design Studio and I have two questions about the Dropodown Box Item (well actually it's more about scripting...):
- in the startup script of the application I want to populate one dropdown box with master data values of the infoobject 0FISCPER, how can I realize that? (if I use "DS_1.getMemberList...." I get only the values of 0FISCPER for which there is transaction data)
- as a datasource I use a query with 2 variables:
- Is it possible to populate these 2 variables with default values and skip the initial Variabile Initialization Screen?
- I use 2 dropdown box items to set the values of these 2 variables. For one variable everything it's ok (I select the value in the dropdown and the script populate the variable with that value and the data in the crosstable changes accordingly) but for the other variable associated to the 0FISCPER infoobject when I select the value in the dropdown it's seem that nothing happens since the Variabile Initialization Screen pop-up and an error says that I have to select a value for the variable. I did the same simple scripts for the these 2 variables, why does it work for one variable and not for the other?
Thanks,
Michele

I answer myself about one question:
"Is it possible to populate these 2 variables with default values and skip the initial Variabile Initialization Screen?"
Yes, it's possible to create a script in order to populate the variables in the event "On Variable Initialization" of the Application and set false to the property "Force Prompts on Startup".

Question about Measure folders Items (dimensions & measures)

Hi All,
I have tow question about measure folder
1-     How can I make measure folder contain both dimensions & measures?
     Like this image http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/r10122/images/d1t10202.gif
2-     When I create measure folder and add some measures in it, when I query cube these measures still displayed out of folders how can I make all measures and dimensions displayed only on folders like the above image ?
Regards,
Gado

Hi Andy,
There should be no difference in functionality for these two kinds of folders. You can perform all the operations on these two kinds of folders without any difference, for example, delivery messages, create view settings/rules and etc.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Question about sorted, hashed tables, mindset when using OO concepts...

Hello experts,
I just want to make sure if my idea about sorted and hashed table is correct.Please give tips and suggestions.
In one of my reports, I declared a structure and an itab.
TYPES: BEGIN OF t_mkpf,
 mblnr LIKE mkpf-mblnr,
 mjahr LIKE mkpf-mjahr,
 budat LIKE mkpf-budat,
 xblnr(10) TYPE c,
 tcode2 LIKE mkpf-tcode2,
 cputm LIKE mkpf-cputm,
 blart LIKE mkpf-blart,
 END OF t_mkpf.
it_mkpf TYPE SORTED TABLE OF t_mkpf WITH HEADER LINE
 WITH NON-UNIQUE KEY mblnr mjahr.
Now, I declared it as a sorted table with a non-unique key MBLNR and MJAHR. Now suppose I have 1000 records in my itab. how will it search for a particular record?
2. Is it faster than sorting a standard table then reading it using binary search?
3. How do I use a hashed table effectively? lets say that I want to use hashed type instead of sorted table in my example above.
4. I am currently practicing ABAP Objects and my problem is that I think my mindset when programming a report is still the 'procedural one'. How do one use ABAP concepts effectively?
Again, thank you guys and have a nice day!

Hi Viray,
The different ways to fill an Internal Table:
append&sort
This is the simplest one. I do appends on a standard table and then a sort.
data: lt_tab type standard table of ...
do n times.
ls_line = ...
append ls_line to lt_tab.
enddo.
sort lt_tab.
The thing here is the fast appends and the slow sort - so this is interesting how this will compare to the following one.
read binary search & insert index sy-tabix
In this type I also use a standard table, but I read to find the correct insert index to get a sorted table also.
data: lt_tab type standard table of ...
do n times.
ls_line = ...
read table lt_tab transporting no fields with key ... binary search.
if sy-subrc <> 0.
insert ls_line into lt_tab index sy-tabix.
endif.
enddo.
sorted table with non-unique key
Here I used a sorted table with a non-unique key and did inserts...
data: lt_tab type sorted table of ... with non-unique key ...
do n times.
ls_line = ...
insert ls_line into table lt_tab.
enddo.
sorted table with unique key
The coding is the same instead the sorted table is with a unique key.
data: lt_tab type sorted table of ... with unique key ...
do n times.
ls_line = ...
insert ls_line into table lt_tab.
enddo.
hashed table
The last one is the hashed table (always with unique key).
data: lt_tab type hashed table of ... with unique key ...
do n times.
ls_line = ...
insert ls_line into table lt_tab.
enddo.
You Can use this Program to Test:
types:
begin of local_long,
 key1 type char10,
 key2 type char10,
 data1 type char10,
 data2 type char10,
 data3 type i,
 data4 type sydatum,
 data5 type numc10,
 data6 type char32,
 data7 type i,
 data8 type sydatum,
 data9 type numc10,
 dataa type char32,
 datab type i,
 datac type sydatum,
 datad type numc10,
 datae type char32,
 dataf type i,
 datag type sydatum,
 datah type numc10,
 datai type char32,
 dataj type i,
 datak type sydatum,
 datal type numc10,
 datam type char32,
 datan type i,
 datao type sydatum,
 datap type numc10,
 dataq type char32,
 datar type i,
 datas type sydatum,
 datat type numc10,
 datau type char32,
 datav type i,
 dataw type sydatum,
 datax type numc10,
 datay type char32,
 dataz type i,
 data11 type numc10,
 data21 type char32,
 data31 type i,
 data41 type sydatum,
 data51 type numc10,
 data61 type char32,
 data71 type i,
 data81 type sydatum,
 data91 type numc10,
 dataa1 type char32,
 datab1 type i,
 datac1 type sydatum,
 datad1 type numc10,
 datae1 type char32,
 dataf1 type i,
 datag1 type sydatum,
 datah1 type numc10,
 datai1 type char32,
 dataj1 type i,
 datak1 type sydatum,
 datal1 type numc10,
 datam1 type char32,
 datan1 type i,
 datao1 type sydatum,
 datap1 type numc10,
 dataq1 type char32,
 datar1 type i,
 datas1 type sydatum,
 datat1 type numc10,
 datau1 type char32,
 datav1 type i,
 dataw1 type sydatum,
 datax1 type numc10,
 datay1 type char32,
 dataz1 type i,
end of local_long.
data:
ls_long type local_long,
lt_binary type standard table of local_long,
lt_sort_u type sorted table of local_long with unique key key1 key2,
lt_sort_n type sorted table of local_long with non-unique key key1 key2,
lt_hash_u type hashed table of local_long with unique key key1 key2,
lt_apsort type standard table of local_long.
field-symbols:
<ls_long> type local_long.
parameters:
min1 type i default 1,
max1 type i default 1000,
min2 type i default 1,
max2 type i default 1000,
i1 type i default 100,
i2 type i default 200,
i3 type i default 300,
i4 type i default 400,
i5 type i default 500,
i6 type i default 600,
i7 type i default 700,
i8 type i default 800,
i9 type i default 900,
fax type i default 1000.
types:
begin of measure,
 what(10) type c,
 size(6) type c,
 time type i,
 lines type i,
 reads type i,
 readb type i,
 fax_s type i,
 fax_b type i,
 fax(6) type c,
 iter type i,
end of measure.
data:
lt_time type standard table of measure,
lt_meantimes type standard table of measure,
ls_time type measure,
lv_method(7) type c,
lv_i1 type char10,
lv_i2 type char10,
lv_f type f,
lv_start type i,
lv_end type i,
lv_normal type i,
lv_size type i,
lv_order type i,
lo_rnd1 type ref to cl_abap_random_int,
lo_rnd2 type ref to cl_abap_random_int.
get run time field lv_start.
lo_rnd1 = cl_abap_random_int=>create( seed = lv_start min = min1 max = max1 ).
add 1 to lv_start.
lo_rnd2 = cl_abap_random_int=>create( seed = lv_start min = min2 max = max2 ).
ls_time-fax = fax.
do 5 times.
do 9 times.
 case sy-index.
 when 1. lv_size = i1.
 when 2. lv_size = i2.
 when 3. lv_size = i3.
 when 4. lv_size = i4.
 when 5. lv_size = i5.
 when 6. lv_size = i6.
 when 7. lv_size = i7.
 when 8. lv_size = i8.
 when 9. lv_size = i9.
 endcase.
 if lv_size > 0.
 ls_time-iter = 1.
 clear lt_apsort.
 ls_time-what = 'APSORT'.
 ls_time-size = lv_size.
 get run time field lv_start.
 do lv_size times.
 perform fill.
 append ls_long to lt_apsort.
 enddo.
 sort lt_apsort by key1 key2.
 get run time field lv_end.
 ls_time-time = lv_end - lv_start.
 ls_time-reads = 0.
 ls_time-readb = 0.
 ls_time-lines = lines( lt_apsort ).
 get run time field lv_start.
 do.
 add 1 to ls_time-readb.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_apsort
 assigning <ls_long>
 with key key1 = lv_i1
 key2 = lv_i2
 binary search.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do.
 add 1 to ls_time-reads.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_apsort
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_apsort
 assigning <ls_long>
 with key key1 = lv_i1
 key2 = lv_i2
 binary search.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_b = lv_end - lv_start.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_apsort
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_s = lv_end - lv_start.
 collect ls_time into lt_time.
 clear lt_binary.
 ls_time-what = 'BINARY'.
 ls_time-size = lv_size.
 get run time field lv_start.
 do lv_size times.
 perform fill.
 read table lt_binary
 transporting no fields
 with key key1 = ls_long-key1
 key2 = ls_long-key2
 binary search.
 if sy-index <> 0.
 insert ls_long into lt_binary index sy-tabix.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-time = lv_end - lv_start.
 ls_time-reads = 0.
 ls_time-readb = 0.
 ls_time-lines = lines( lt_binary ).
 get run time field lv_start.
 do.
 add 1 to ls_time-readb.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_binary
 assigning <ls_long>
 with key key1 = lv_i1
 key2 = lv_i2
 binary search.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do.
 add 1 to ls_time-reads.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_binary
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_binary
 assigning <ls_long>
 with key key1 = lv_i1
 key2 = lv_i2
 binary search.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_b = lv_end - lv_start.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_binary
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_s = lv_end - lv_start.
 collect ls_time into lt_time.
 clear lt_sort_n.
 ls_time-what = 'SORT_N'.
 ls_time-size = lv_size.
 get run time field lv_start.
 do lv_size times.
 perform fill.
 insert ls_long into table lt_sort_n.
 enddo.
 get run time field lv_end.
 ls_time-time = lv_end - lv_start.
 ls_time-reads = 0.
 ls_time-readb = 0.
 ls_time-lines = lines( lt_sort_n ).
 get run time field lv_start.
 do.
 add 1 to ls_time-readb.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_n
 assigning <ls_long>
 with table key key1 = lv_i1
 key2 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do.
 add 1 to ls_time-reads.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_n
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_n
 assigning <ls_long>
 with table key key1 = lv_i1
 key2 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_b = lv_end - lv_start.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_n
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_s = lv_end - lv_start.
 collect ls_time into lt_time.
 clear lt_sort_u.
 ls_time-what = 'SORT_U'.
 ls_time-size = lv_size.
 get run time field lv_start.
 do lv_size times.
 perform fill.
 insert ls_long into table lt_sort_u.
 enddo.
 get run time field lv_end.
 ls_time-time = lv_end - lv_start.
 ls_time-reads = 0.
 ls_time-readb = 0.
 ls_time-lines = lines( lt_sort_u ).
 get run time field lv_start.
 do.
 add 1 to ls_time-readb.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_u
 assigning <ls_long>
 with table key key1 = lv_i1
 key2 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do.
 add 1 to ls_time-reads.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_u
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_u
 assigning <ls_long>
 with table key key1 = lv_i1
 key2 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_b = lv_end - lv_start.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_sort_u
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_s = lv_end - lv_start.
 collect ls_time into lt_time.
 clear lt_hash_u.
 ls_time-what = 'HASH_U'.
 ls_time-size = lv_size.
 get run time field lv_start.
 do lv_size times.
 perform fill.
 insert ls_long into table lt_hash_u.
 enddo.
 get run time field lv_end.
 ls_time-time = lv_end - lv_start.
 ls_time-reads = 0.
 ls_time-readb = 0.
 ls_time-lines = lines( lt_hash_u ).
 get run time field lv_start.
 do.
 add 1 to ls_time-readb.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_hash_u
 assigning <ls_long>
 with table key key1 = lv_i1
 key2 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do.
 add 1 to ls_time-reads.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_hash_u
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data11 = sy-index.
 endif.
 get run time field lv_end.
 subtract lv_start from lv_end.
 if lv_end >= ls_time-time.
 exit.
 endif.
 enddo.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_hash_u
 assigning <ls_long>
 with table key key1 = lv_i1
 key2 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_b = lv_end - lv_start.
 get run time field lv_start.
 do fax times.
 lv_i1 = lo_rnd1->get_next( ).
 lv_i2 = lo_rnd2->get_next( ).
 read table lt_hash_u
 assigning <ls_long>
 with key key2 = lv_i1
 key1 = lv_i2.
 if sy-subrc = 0.
 <ls_long>-data21 = sy-index.
 endif.
 enddo.
 get run time field lv_end.
 ls_time-fax_s = lv_end - lv_start.
 collect ls_time into lt_time.
 endif.
enddo.
enddo.
sort lt_time by what size.
write: / ' type | size | time | tab-size | directread | std read | time direct | time std read'.
write: / sy-uline.
loop at lt_time into ls_time.
write: / ls_time-what, '|', ls_time-size, '|', ls_time-time, '|', ls_time-lines, '|', ls_time-readb, '|', ls_time-reads, '|', ls_time-fax_b, '|', ls_time-fax_s.
endloop.
form fill.
lv_i1 = lo_rnd1->get_next( ).
lv_i2 = lo_rnd2->get_next( ).
ls_long-key1 = lv_i1.
ls_long-key2 = lv_i2.
ls_long-data1 = lv_i1.
ls_long-data2 = lv_i2.
ls_long-data3 = lv_i1.
ls_long-data4 = sy-datum + lv_i1.
ls_long-data5 = lv_i1.
ls_long-data6 = lv_i1.
ls_long-data7 = lv_i1.
ls_long-data8 = sy-datum + lv_i1.
ls_long-data9 = lv_i1.
ls_long-dataa = lv_i1.
ls_long-datab = lv_i1.
ls_long-datac = sy-datum + lv_i1.
ls_long-datad = lv_i1.
ls_long-datae = lv_i1.
ls_long-dataf = lv_i1.
ls_long-datag = sy-datum + lv_i1.
ls_long-datah = lv_i1.
ls_long-datai = lv_i1.
ls_long-dataj = lv_i1.
ls_long-datak = sy-datum + lv_i1.
ls_long-datal = lv_i1.
ls_long-datam = lv_i1.
ls_long-datan = sy-datum + lv_i1.
ls_long-datao = lv_i1.
ls_long-datap = lv_i1.
ls_long-dataq = lv_i1.
ls_long-datar = sy-datum + lv_i1.
ls_long-datas = lv_i1.
ls_long-datat = lv_i1.
ls_long-datau = lv_i1.
ls_long-datav = sy-datum + lv_i1.
ls_long-dataw = lv_i1.
ls_long-datax = lv_i1.
ls_long-datay = lv_i1.
ls_long-dataz = sy-datum + lv_i1.
ls_long-data11 = lv_i1.
ls_long-data21 = lv_i1.
ls_long-data31 = lv_i1.
ls_long-data41 = sy-datum + lv_i1.
ls_long-data51 = lv_i1.
ls_long-data61 = lv_i1.
ls_long-data71 = lv_i1.
ls_long-data81 = sy-datum + lv_i1.
ls_long-data91 = lv_i1.
ls_long-dataa1 = lv_i1.
ls_long-datab1 = lv_i1.
ls_long-datac1 = sy-datum + lv_i1.
ls_long-datad1 = lv_i1.
ls_long-datae1 = lv_i1.
ls_long-dataf1 = lv_i1.
ls_long-datag1 = sy-datum + lv_i1.
ls_long-datah1 = lv_i1.
ls_long-datai1 = lv_i1.
ls_long-dataj1 = lv_i1.
ls_long-datak1 = sy-datum + lv_i1.
ls_long-datal1 = lv_i1.
ls_long-datam1 = lv_i1.
ls_long-datan1 = sy-datum + lv_i1.
ls_long-datao1 = lv_i1.
ls_long-datap1 = lv_i1.
ls_long-dataq1 = lv_i1.
ls_long-datar1 = sy-datum + lv_i1.
ls_long-datas1 = lv_i1.
ls_long-datat1 = lv_i1.
ls_long-datau1 = lv_i1.
ls_long-datav1 = sy-datum + lv_i1.
ls_long-dataw1 = lv_i1.
ls_long-datax1 = lv_i1.
ls_long-datay1 = lv_i1.
ls_long-dataz1 = sy-datum + lv_i1.
endform.".
Thanks & Regards,
YJR.

Question about using library items in forms

After a long time I am again returning to this perpetual fountain of Dreamweaver knowledge.
I am converting a site from AGL to DW. In AGL I used a separate template for the forms (there are over 10) and used "components" to create the different forms. Each form shared features with other forms but were not identical, all together 5 components. When I converted over to DW the 5 compnents were made into 5 "library items" but neither the form template or the library items work, by that I mean they do not update if I make a change.
Hence I want to make 5 new library items to use in the forms my question is this: when I choose an item to put in the form like a text field or radio button I always get this window.
Though I read the documentation I am still not really clear about the "style" option so I just choose "no label tag." What is this used for? Any examples of how it is used?
Regarding "position" before or after the item, what is this all about? I have been choosing "after form item" but I don't really know what the difference is and what advantages or disadvantages acrue from these choices.
Regarding "Access key" and "Tab index" I sort of have the idea of what it is about but an example of how they work in action would clear up any nebulosity.
But my real puzzle is with the following which pops up at the end when I am inserting a form items.
Since the library items are not separate forms in themselves I have NOT added the form tag because my reasoning is that when I make the new form templates it will have the requisite form tags. Am I correct in this line of thinking? Or do I have to add form tags every time I add form elements to a form? I really don't want to have to do the whole thing over again if I get it wrong. So if one of you kind souls could guide me in doing it right the first time I would really appreciate it.
I am using a MBP, OS X 10.6.8, DW CS6
BvL

To declare constants create a Package-Specification in a pll and deifne all your constants there, something like:
PACKAGE PK_CONSTANTS IS
RC_SUCCESS CONSTANT PLS_INTEGER := 1;
RC_FAILURE CONSTANT PLS_INTEGER := 0;
RC_YEAR_DATA_NOT_FOUND := 50;
END;Then attach that pll to all your forms-modules, and use it like
IF rc = PK_CONSTANTS.RC_YEAR_DATA_NOT_FOUND THEN
END IF;A word about exceptions or errors: In my eyes its clearer (and in case of exceptions even better) to raise an exception than to hide it behind return-codes.

Question about customer line item clearing

Hello everyone,
There is one question here. Since from the result of FBL5N in SAP, the total amount of AR is zero, but the cleared /Open symbol still show these items are open. Itu2019s very strange because these should be shown as cleared items as the total amount is zero.
Do we have to clear them manually? or does it take time to show effect in the system?
Plz explain.
Thanks
Leena...

Hi Leena,
While pulling the customer report for open item by giving today's date if you are still finding open items being there total to zero, you need to manually clear them. Transaction Code-F-32
Warm regards,
Murukan Arunachalam
Edited by: Murukan_A on Jan 5, 2012 10:21 AM

The question about max line item in material document

Dear sir:
I want to excute CO27 for an FP . It will create material documents. The max line item is 100 in each material document. But I want to record 400 lines in a material document. Is it possbile to change the number of max line in material document? How could I do to change that ? Thanks !!

I know about 333 in case of physical inventory because the finacial document has a technical limitation of 3 digits for Fi document item number, which means the FI document cannot take more than 999 lines.
In case of physical inventory a material document item can create up to 3 FI item lines. So the limit for physical inventory became 333.
I dont know from where you have the 100 as limitation, but take the above said into consideration before you change anything.

Question about returning online items...

Just to confirm, the 15-day timeframe begins when the item is delivered to the residence, correct? Not when the order is initially placed?

Hi jbtb07,
Thank you for taking the time to connect with us on the forum.
It looks like CrystalWoW was able to answer your questions; however, let me see if there is anything else I can help add. As CrystalWow mentioned, a "special order" product will be ordered directly from the manufacturer. A majority of our special order products will tend to be appliances and should be marked accordingly on BestBuy.com. If you ordered an item from one of our online Marketplace retailers, then you would want to contact them directly regarding a return or exchange.
I hope you have a wonderful day, and let us know if you have any other questions!
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Question about creation dimension items

It is possible to load items from a dimension in the logical layer?
Like this : I have a dimension of Vehicles and have this items:
Cars
Motorbikes
Trucks
Is possible to create in logical layer a new member of dimension like Cars/Motorbikes?
In presentation layer I would see if I click on this dimension:
Cars
Motorbikes
Trucks
Cars/Motorbikes
Thank you!!

I assume you're using Portal 3.0. There's not much you can do to control the sorting in the category or perspective portlets. In Portal Release 2, the custom search portlet replaces the category/perspective portlets and gives you additional control, including control over the sort order if you don't have Oracle Text enabled.
As a workaround, you could write a custom report or dynamic page using the content area views to display content anyway you want.
Regards,
Jerry
Portal PM

A question about sorting tables.

Hello All!
Just a quick question: performance wise, which is better, declare an itab with the 'sorted table of' or use the 'sort itab' later.
Thanks in advance!
Moderator message: please try yourself and search for available information and previous, similar discussions.
Edited by: Thomas Zloch on Feb 23, 2012

Hi Kevin,
follow for example more or less the code given in this thread: Functionality to dynamically sort tableview columns and implement a compare method corresponding to your needs (for example using compareToIgnoreCase method of String).
Hope it helps
Detlev

NEED HELP! Possibly easy question about 'sorting' on your iPod

I can't find the answer anywhere... You know when you sort on 'artist' (or probably anything) on your iPod, if the artist's name is "The Beatles", the artist will be found under the letter "B", not "T". Or if the artist's name is "A Perfect Circle", the artist will be found under "P" and not "A". Etc...
Is there a way to change this? I actually don't mind it, but was curious because:
Is there a way to add words that it would do this for? i.e. add the word "Tha" in iTunes for your iPod so artist "Tha Dogg Pound" is found under "D" and not under "T".
Sorry if this answer is somewhere but I cannot find it. Any help would be greatly appreciated! Thank you in advance!!!

In iTunes for Windows the auto-sort feature is controlled by the file C:\Program Files\iTunes\iTunes.Resources\<Region Code>.lproj\SortPrefixes.plist. For English the words ignored for sorting are "A ", "An " & "The ". You could edit this list or just use the Sort Artist, Sort Album Artist etc. fields as necessary when you'd like something sorted into a different position. I can't recall ever testing to see if the iPod picks up on changes made to this file so it may be that another properties file would need editing on the classic in order to achieve the same end.
tt2

Question about sort after commit

Hello!
I have a view object. I put in "order by clause" some sort(In query tab of this view object). I created jsf page and dropped this view object like table. I also dropped a Commit operation as button. When I change some value in row and press Commit button, my "order by clause" on view object doesn't perform and I get unsorted data. When I press Commit second time, "order by clause" perform. Can you suggest how to workaround this "Commit" behavior?
JDeveloper version 11.1.2.2.0
Thank's for answers.
Regards, Stanislav

Hi,
Perform Execute after the commit. You can do this by executing both the actions in the actionListener of the commit button. Search in this forum for how to execute the action binding from backing bean.
-Arun

Question about sorting arrays

Hi,
I have posted information from an one-dimensional array on to a list widget. When a user selects an item in the list(index value = 3), presses the delete button, the item would be removed. Likewise, the element of the array at index value 3 would also be removed (or set to null?).
The trouble I am having is, how would you move up the elements that are subsequent to the element index value 3? For example, moving element index value 4 up to 3, 5 up to 4, 6 up to 5....etc.?
Here is my code:
public void delete()
list.delItem(list.getSelectedIndex());
student[list.getSelectedIndex()]=null;
Thanks alot!!

It's usually faster to use System.arraycopy() to close up the "hole" when removing something from an array: public void delete() {
 int index = list.getSelectedIndex() ;
 list.delItem(index) ;
 // if not removing last item... close up hole...
 if (index < (student.length-1)) {
 System.arraycopy(student, index+1, student, index, student.length - 1 - index) ;
 // clear out space made empty at end of array
 student[student.length-1] = null ; // or whatever represents 'empty' in your student[]

Question about sorting of items...

Similar Messages

Maybe you are looking for