QUESTION ABoUT SWF FILES AND PUBLISHING PROJECT

hi
well as isaid before i m new i nthis
imade soome practices is going well i trie adding a componet wich work very nice liek the apple covverflow adding transition and every new image in every new file i export this in swf format   it give me my files deployto web run local and ria aplication ok well m y question is when i add this swf file to my web design in other file project or project in another state   it works sooo goooood
but my question is when i publish tis it give mes agai na run local deploy to web and ria    i have to upload this to host and server or both      projecst already created mmmmm idont unerstand this   anyway when i run my last run local file / main.html with th whole page setup ir runs all perfectly but is it because is from my files or the whole thing will run nice and goood once is being uploaded
btw i used ecercise file   showed in this page
i jsut add new test gallerias
please answer me
thansk by reading

Yeah     the answer is goood but my main doubt was like
if i add sfw file to   other web projectfxp file i just have to add the result of the fxp export files so that last   deploy to web i have to upload the last deploy to web to server right ?
other thing do i have to reae the file :   do i have to rename the file main.html   ?

Similar Messages

Beginner Question re: SWF files and FLA files

Hi,
Im new to flash. I have some templates (in FLA format with all supporting files...xml; html; and the swf file). When using html templates, I can modify the content easily by simply adding or changing the text <p>original text</p> to <p>steve custom text</p> and so on.
My issue is Im trying to modify the content of the fla files into a new swf file but do not know how to access the text, background or images the tempalte is currently producing. The timeline at the bottom doesnt show objects and their timelines like the basic tutorials show me.
Is there a way to access the content of of an fla file or perhaps the content of an swf file? I think the swf file is like a jpeg coverted from RAW, meaning its the end product and the source file is where the modify is done.
Am I swimming in the deep with sharks?
Thanks!

hmm..so if the template ive downloaded depicts a green ball bouncing across an orange background(swf file). The objects (green ball) and the background (simply overlay colored orange) is embedded into the FLA AS3 code?
not necessarily. they could be created with code, they could be created with the tools in the fla and they could be loaded bitmaps.
To be clear these objects (in my example: ball and background) are not external jpegs (or similar file type like png) which I can open, edit, then allow the code to access and utilize the new object. For example, change the ball into a square and changes it color to purple and then change the background to pink via PS or illstr.
In short, Im having trouble trying to find the objects which are being manipulated by the code. My current perspective with templates is to modify the image or text by accessing the files delivered with the template. If the .html commands to place image221.jpeg in certain div, I would just open the images files, find image221.jpeg, modifiy the image and then save it as image221.jpeg. Of course I can create a new image save it as steve123.jpeg, save it to the images folder and then modify the code to access the new file by using its new name.
This is what Im trying to accomplish with my flash template but cant find the source objects .
Im getting the impression this cant be done.
that's almost certainly incorrect.
My final question is then, where are source images or text or movie files stored?
noone can say without direct inspection.
Is it possible they are on third party servers on the web?
no
Are they imbedded in the code?
maybe yes, maybe no.
I can only assume if they are stored on my drives (in an external format) that I would be able to access them.
correct. more specifically, they would have to be in the directory with your embedding html and swf or a subdirectory.
If however, they are on a a third part web site or embedded into the code, then I may be in way over my head.
you can assume this is not the case.
so, open the fla in flash. click control/test. click view and make sure bandwidth profiler and streaming graph are checked. you should then be able to see the main timeline as the swf plays. note the main timeline frame where you see the object(s) you want to edit.
close the test environment and go to that main timeline frame and start sleuthing to see if the objects were created in flash. you can also click on the first object in the library and arrow down looking for the object(s) you want to edit to see if they were created without code. if you find them, note their library name and possibly linkage id or class. use movie explorer to search for those names.
but, to be sure, it can be very difficult to edit templates. i've not seen one yet that was made by a competent developer and i've worked on dozens of them.

Quick question about mobile sites and publishing.

I currently have a desktop site at fabhollie.com
I would like to start designing a phone and tablet site. My question is can I publish only the desktop site rather than all three? I would like to be able to work on the mobile site without publishing them until I have completed them. Some of the content on my requires me to update it weekly. Is there any way I could make these changes on my desktop site and publish them without publishing the unfinished phone and table pages? Thanks.

You certainly can! ;-)
Go into your site Properties. Select Mobile on the left and uncheck the redirect button down on the lower right. This will still publish the mobile site to the live server so you can test it but it won't automatically redirect until you check that box again.
It is a feature designed for exactly what you want to do.

Question about ear file and jar file

I have an ear file that I built using ant. Say my project name is test. So my ear file name is test.ear. Everytime I try to deploy the ear file, weblogic complains about not finding the test-ejb.jar. I'm confused as to why weblogic expects a test-ejb.jar in the ear because I didn't intend to put one in. My question is whats inside the ear file that weblogic thinks it needs the test-ejb.jar? I went through the file, but couldn't find anything that should tell weblogic that it should find a test-ejb.jar. In addition, I don't have either weblogic-ejb-jar.xml or ejb-jar.xml in the ear file. Any help would be appreciated.
Thanks in advance.

An EAR should have an "application.xml" in the META-INF directory within the JAR. You might take a look at it. I suspect there is an EJB module specified by that name.

Launching SWF file within the project - Video Avatar and Calculator

Hi There, I am somewhat new to Captivate so please bear with me. I am using Captivate 6.0 and have basic coding knowledge. I have a question about how to launch SWF files within my project. There are 2 things I am trying to accomplish.
1. I have a video avatar that I want to use within my project. When a user clicks an icon or button on certain screens I want the appropriate video to launch within the same window. My video is an swf file but it can be another file type if that is better. Is this something that I can accomplish with Captivate 6.0?
2. I have built a basic flash calculator - also an swf file - that I want the user to be able to launch on certain screens. When the user clicks a calculator button, the calculator would launch for the user to use, then the user would be able to close the calculator and return to the screen they were on.
Could someone direct me to some resources on how to accomplish this? If there are any widgets that would make this easier that would be great - but if I need to write some code I can try and do this if someone can direct down the right road. I have spent hours looking for information on this topic but can't find any (at least any that I understand)
Please, and thank you!!!

Rory,
Your Video is 720 x 480 @ 1.212 PAR, according to your screen-cap. In Photoshop (PS), go to Image New (Ctrl+N) and choose the NTSC 720 x 480 Widescreen 16:9 PAR 1.2. Once done, choose Image>PAR and Custiom, change 1.2 to 1.212 (this was a change in PrPro, and might not have yet made it into PS yet). Now, Open your full rez image. Ctrl+A (Select All), Ctrl+C (Copy), and then bring focus to your New Image. Hold Shift and Ctrl+V (Paste). This will put your image on a New Layer, Layer 1, in an Image with the correct dimensions and PAR. You can the Ctrl+T (Free Transform) and adjust the size of your Layer 1 image to suit. Holding down Shift while dragging the Handles of the Bounding Box will constrain the Aspect Ratio. Note, you might be cropping some of that image to fit the Aspect Ratio of your New Image. Anything outside of the Image boundries will effectly be cropped off. Note: you are NOT using the Crop Tool here, but letting the New Image Aspect Ratio effectively do the cropping (note no capitalization) for you. When satisfied with the result, you Delete the Background Layer (not necessary, but I do this to clean things up a bit), and Save_As .PSD to the proper folder.
With Scale to Fit turned OFF, Import_As Footage, this image and drag to the Timeline, making sure that Scale to Fit is OFF. It should be perfect then. Hope that this works for you and gets rid of the problem.
Good luck,
Hunt

I have a question about DWG files. Can I open them on my MacBook Pro with OX 10.9.5 system?What app do I need to view and print them?

I have a question about DWG files. What app will allow me to open DWG files to view them on my Macbook Pro?

Perform this Google search: ".dwg files on mac." The results should provide answers for you.

Question about download file in OAS4

Question about download file in OAS4:
I use Oracle Application Server 4.0.7 on my Windows NT 4.0 SP6;
I use PL/Sql Cartridge developer a document system; It's use the
upload/download in PL/Sql Cartridge;
I read the document , the Upload/download in Pl/Sql Base on the
Oracle Application Server's Content Service. the Problem is when I
download a document, If I upload a Html or MsWord file, It will store in a LongRaw column, when me download ; It's tell me can't
find a application to open this file; I will select a application
from list to open the download file;
As normal, It will open MsWord Automatic when download a "doc" file ; also It will open a new window of Browser to view a Html file;
I check the download process on client Browser; when download
file, The content-type always return "application/octet-stream";
Also the download File will lost the postfix of the file,
So Browser don't open the File Automatic;
I think If I set the correct Content-Type , Browser can know how open the file; So I use owa_content.set_content_type procedure
set the Doc file to "application/msword" , but the WEb Server always
return "application/octet-stream";
I didn't know how to do this problem, Plese help me.
null

I have a Tecra M2 and rely on your email update to ensure I have the latest drivers on my machine.
When I received a Toshiba support email on 14 April 2005 giving reference to a QFE from Microsoft I assumed it would be necessary for my Tecra.
I was very confused when I found that this QFE and subsequent ones posted on the 16 April 2005 relate to Pre SP2 critical updates no9t required if one has already taken earlier advice of updating to Service Pack, at the very least your narrative should make mention of this. I find it very difficult to believe that your updates are two+ years out of date.

Question About Color's and Gradients

Hi all,
I have a question about color swatches and gradients.
I am curious to know, if I have 2 color swatches that I make into a gradient color, is it posible to change the tint of each indivdual color in that gradient and have that applied to the gradient without having to adjust the gradients opacity.
The reason that I'm asking this is because in creating a project I found that the colors that I chose for to make my gradient from my swatches were to dark, and while I can adjust each one's tint to my liking (if the object they were applied to was going to be a solid color) but that doesn't seem to apply to the overall gradient.
I hope that makes sense, I know that this was something that was able to be accomplished in quark and was wondering if I can do something similar.

If you double click your gradient swatch (after adding it to the swatches)
Then click a colour stop in the gradient, and then change the drop down menu to CMYK (or rgb)
And you can alter the percentages there. It's not much use for spot colours but it's a start.
But making tint swatches would be a good start anyway.
At least then when you double click the gradient (in the swatches) to edit it you can choose from CMYK, RGB, LAB, or Swatches and adjust each colour stop to your liking.

Question about openning files using SDK 10.

I have written a Plug-In for SDK 9 that works wonderfully. One of the functions is for the user to be able to page (Next/Previous) between PDF files on our server. This functionality now longer works without crashing Acrobat 10. All I am doing is creating the URL path to the next/previous PDF, creating a CustomFileSys with the path and calling AVDocOpenFromFile.
Does this no longer work with Acrobat 10 SDK?
Thanks!

Should work fine, AFAIK.
For this level of issue, I would open a formal support request with developer support.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 10 Oct 2011 08:51:08 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Question about openning files using SDK 10.
Question about openning files using SDK 10.
created by Greggars<http://forums.adobe.com/people/Greggars> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3963065#3963065

I only have the SWF file and HTML5 output, how can I control it?

Picture this: A client gives me two zipped archives; one archive has a SWF file and another has HTML5, JS, and CSS. Both were published after checking "Scorm 1.2" in the reporting tab in Captivate. I'm just one developer and all I have at my disposal is html, javascript, and css.
Is it possible for me for resume progress? Send quiz scores to my web service? Control playback?

The 'built-in method' is called Self-paced Learning, and it usually has a message window that appears when you resume the lesson which asks the user whether or not they want to resume from the last visited slide. However, as has been mentioned before on this forum, as soon as you activate LMS Reporting in Quiz Settings then Self-paced Learning is disabled. It's only designed for situations where an LMS is NOT involved. LMSs typically have other mechanisms for resuming playback and having more than one mechanism active at the same time could result in conflicts.
SCORM-compliant LMSs have the option of using Resume Data Bookmarking, but not all LMSs implement this in consistent ways. The new SCORM drivers with Cp6 do a much better job of implementing bookmarking than previous versions, so I encourage anyone to upgrade to Cp6 if they haven't already done so.
Since it sounds like you're trying to roll your own LMS I'm assuming that your Cp modules will have Quiz Reporting turned on, which means Self-paced Learning is NOT going to be an option. You'll need to work with the SCORM Resume Data to achieve your goals. But this is NOT an area for the faint-hearted or the non-programmer. In SWF content, the scoring variables are passed from within the Captivate runtime to the Javascript SCORM API. In HTML5 content this will all be JS code, however, it's going to be quite complex JS code and messing with it at all is likely to break something. Personally, I wouldn't go that route. If you're going to build your own LMS, make it the LMS that picks up the scoring and resume data from the Captivate output, rather than hacking the Cp code itself.

Using a container to load several swf files and play them

I need some help. I want to use several swf files and have them be called upon in a container file and play them in sequence. It's a presentation that needs to play thru but still have the ability to stop, click on items, open a popup and then continue on in the presentation. I am building all the individual "chapters" and their "sub-chapters" as swf files, with the hope that I can load them in order. I am relatively new to AS3. Help?

If you will be loading swf files into a container then you will use the Loader class to accomplish that, so give that a looking over in the help documents and see what you can do. If you have a problem getting it to work, post your code and describe what you have done.

Question about clear page and reset pagination

Hi,
I have a question about clear pages and the reset pagination in an URL. What is the reason why a clear page doesn't also trigger a reset pagination on the pages which are cleared?
I can't really imagine a business case where it makes sense to clear all data of page items on a page and don't reset the pagination of reports on that page which probably use a page item in there where clause...
The drawback of this behavior is that a developer always has to set the reset pagination checkbox when he clears the target page and the even bigger drawback is that if you specify other pages to clear, you can't reset pagination for them, because reset pagination only works for the target page.
Thanks for your input.
Patrick
*** New *** Oracle APEX Essentials *** http://essentials.oracleapex.info/
My Blog, APEX Builder Plugin, ApexLib Framework: http://www.oracleapex.info/

Enhancement request filed, thanks,
Scott

The question about portlet customization and synchronization

I have a question about portlet customization and synchronization.
When I call
NameValuePersonalizationObject data = (NameValuePersonalizationObject) PortletRendererUtil.getEditData(portletRenderRequest);
portletRenderRequest.setPortletTitle(str);
portletRenderRequest.putString(aKey, aValue);
PortletRendererUtil.submitEditData(portletRenderRequest, data);
Should I make any synchronization myself (use "synchronized" blocks or something else) or this procedure is made thread-safe on the level of the Portal API?

HI Dimitry,
I dont think you have to synchronize the block. i guess the code is synchronized internally.
regards,
Harsha

A question about item "type and release" of source system creation

Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115     Oracle Applications 11i
TLF 205     Tealeaf 2.05B
XPD 020     SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
Maggie

Hello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie

Recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42

recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42 are all the cores being used with FCP7?

johnnyapplesod wrote:
exporting qt files and rendering project files now takes longer than my old machine
It's because the PowerMac G5 had HUGE bandwidth with a fat BUS on each processsor so they could run hard, hot and heavy.
It's not so with the Intel processors which are multi-core and share a common bus thus bottleneck.
The newer Intel processors can do more work on the CPU, but when it comes to in/out they are s-l-o-w.
I've had a wickedly fast dual processor (not dual core) G5, RAID 0 pair of 10,000 RPM drives as boot and a fast video card, I could do a lot very very fast.
You'll likely have to upgrade to Final Cut X to get more cores utilized, prepare to cry a little bit, Apple is working on the features they stripped out of it to make amends to pro users who complained loudly. (all over TV too)
http://www.loopinsight.com/2011/09/20/apple-releases-major-update-to-final-cut-p ro-x-release-demo-version/

QUESTION ABoUT SWF FILES AND PUBLISHING PROJECT

Similar Messages

Maybe you are looking for