Question about the alarm function.

Has anyone used the alarm function on the iPhone?
This may be a dumb question, but does the phone need to be in sleep mode, not shut off for alarms to work? If that is the case (I expect it is) would it be best to leave on while charging overnight for an early morning alarm to work properly?
I think I've answered my own question, because I doubt an alarm can go off if the phone is off, but probably would if it was just asleep. Any thoughts on the alarm function in general?
Thanks,
CD3

CD3, I would also assume the same but I do not really
know the answer. To answer your question, yes. I use
the Alarm function everyday thought I do not know why
as I get up before the !@# thing wakes me up.
Your answer is funny. I only need the alarm to wake me for a flight I'm taking to a show in Denver in Sept. Don't want to miss the flight because the alarm didn't work because the phone was completely off.
So the non lazy way to answer my question...I'm going to try it myself. If it works one way or the other I'll mark my question answered and get myself a point or 2
CD3

Similar Messages

Some question about the renegotiation function in SRM Contract (GOA)

Hi All Expert,
We are on SRM 5/4.6, there is a question about the renegotiation function in SRM GOA.
Can we renegotiate the price for some parts in the GOA items with this function ( e.g. Only renegotiate one item in the contract) ?
Will the item price updated automatically after the renegotiation?
Many thanks in advance!!!
Wendrin

Hi Sanjeev,
Many thanks for your help.
One more question, if I add a new item when we renegotiation, will it be transfered to contract and create a new item after that?
Thanks and best regards
Wendrin

I have a question about the Siri function.

Here in Belgium, we speak Dutch and also French and English. But I think when you use the Siri function it is always easier to use it with your own language ( Dutch). 28th October, the iphone4S will be launched here in Belgium, but only with a Englisch version of the Siri function. So my question is that you have any idea when te Dutch version will be available in Belgium, or when i buy an iphone 4S with English version that I can update it to a Dutch version when it will be launched..
Thank you for helping
Dylan

Nobody here can tell you anything more about Apple's plans than what they have already publicly stated, which is that more languages were promised for later (including Japanese, Chinese, Korean, Italian, and Spanish in 2012).

Question about the Wait Function

I wrote a VI to store the time stamps in a text file.
I fond something strange in the text file (see the picture below).
The time stamps weren't writen into the file every 10 ms! How could this happen? And how could I fix it and make the time stamp to be writen every 10ms?
Thanks a lot!

To further what was just said:
The wait function will indeed wait 10ms, or near enough as I will soon explain.
When used in a loop, the wait function will wait for 10ms AFTER the code inside the loop has been executed.
Depending on your Operating System, and the speed of your PC, the code inside the loop could take several hundred milli-seconds to execute.
So the total time for each loop iteration, and thus the time between file writes, will be (Xms + 10ms), where X is the time taken to execute the other code.
Another thing to consider is that unless you are using a Real-Time OS, your Windows or Mac OS will not prioritise LabVIEW! The execution of your code must run alongside your virus scanner, email client, music player etc. etc. etc.
As such, it is often asking too much to try to use labVIEW in accuracies of +/-1ms on the common desktop PC.
As a final note: I cannot give facts on file writing, but just from my experience with LabVIEW a file write every 10ms is impractical as the write-to-file VI usually takes longer than 10ms to execute itself. Why not buffer up 10 writes/pieces of data/whatevers and then write them all to file at once? Whilst we are at it, why not buffer 100 pieces and then write them all at once?
I have had this idea argued before, with people saying that if the system were to crash then the buffered up 100 reads would be lost. Remember guys: that labVIEWs write to file VI passes the data to the windows write buffer, and windows doesn't necessarily put it on disk straight away! That can only be guaranteed by closing the file reference or flushing the queue.
Apologies, I have diverged.
Rhys
Applications Engineer
National Instruments

A question about the save function

How does the save function work in the following flash
application(in fact,this is a game)??
Line
Rider

Good work
There is something know as MMSave
and also look out for file referrence class

Question about the GPS function

I have just got my iPhone 3G, but still need to wait a couple of days to
get my mobile number transferred.
My question is: i don't have at the moment any mobile services from my provider.
(No Service) I do have a WLAN connection. Should my GPS function in Google Maps still work? At the moment the icon is only spinning spinning and spinning....

Thanks All!
I turned it off and on again. waited a couple seconds outside (in the rain )
And it is working great. 100% accurate
Thanks Again.

Question about the 'TEST' function of BAPI

I have run a BAPI function 'BAPI_GOODSMVT_CREATE' using 'TEST FUNCTION MODULE'.
The process is successful and I can see the return material doucment number and year.
However, when I search the table MKPF, no such document exists.....
It seems that a document no. has been used but no such document is really created...as when I create a material document manually using transaction code MIGO, a doucment with doc. no. = that return by BAPI by using test function module + 1.
I want to know is there any way to commit the transaction created by test function module? and it is wierd that it makes my document number becomes discontinue....
thanks!

Gundam,
whenever you use TEST facility, the changes are never committed to the database. However, you loose the serial number because of Serial Number Range Object. Once you take a number of the object, that number is lost and that is why you are missing the sequence.
Regards,
Ravi
Note : please reward the posts that help you.

Question about the Filter type for the trace provide "Microsoft-Windows-Kernel-File"

Hello all,
I have moved this question from the Windows
Server General Forum accorfing to the suggestion from Mr. Justin Gu
I have a question about the Filter function for the trace provider "Microsoft-Windows-Kernel-File".
I can find the Filter function with the following operation.
Mr. Justin Gu wrote:
> You create a Data Collector Set for the trace provider "Microsoft-Windows-Kernel-File" and finish completely, then you > can right click it and select Properties.
In the Properties dialog box, click Filter and
then select ‘Edit…’. You will be> able
to see the Filter type and Filter data in the Filter dialog box.
What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.

What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.
I'm looking for the same information.

Question about the function module (RFC_READ_TABLE)

Dear everyone
Could I ask you a question about the function module (RFC_READ_TABLE)?
I was asked if it's possible to create a report which compares the data between different SAP systems (both production systems).
Now, the easiest way would be to use the function module (RFC_READ_TABLE) within a SAP infoset query (SQ01 type query).
But I heard the rumor that using the function module (RFC_READ_TABLE) is not advisable due to the security reason.
However, I am not exactly sure what sort of security problems this function module can possibly have...
Would you help me on this?
I also would like to know if using "remote enabled module" type function module can always overcome this possible security issue.
Or, are there any points that I need to be careful about even when I use "remote enabled module" function module?
Thank you very much in advance.
Takashi

Dear Fred-san
Thank you very much for your support on this.
But, may I double check about what you mentioned above?
So, what you were mentioning was that if some user executes the query with
the function module (RFC_READ_TABLE), under the following conditions, he can access to
the HR data even when he does not have the authorizations for HR transactions?
<Conditions>
1. the user has the authorization for HR database tables themselves
2. RFC_READ_TABLE is called to retrieve the data from HR database
<example>
Data: LF_HR_TABLE like DD02L-TABNAME value 'PA0000'.
CALL FUNCTION 'RFC_READ_TABLE'
   EXPORTING
    query_table                = LF_HR_TABLE
TABLES
   OPTIONS                    =
   fields                     =
   data                       =    .
But then, as long as we call this function module for a non-critical tables such as
VBAP (sales order) or EKKO (purchase order) within our query, it wouldn't seem to be
so security risk to use RFC_READ_TABLE...
Besides, each query (infoset query) has got the concept of user groups, which limits
the access to the queries within the user group.
※If someone does not belong to the user group, he cannot execute the queries within that
   user group, etc
So, my feeling is that even infoset queries does have authorization concept...
Would you give me your thought on this?
I also thank you for your information for SCU0.
That is an interesting transaction
Kind regards,
Takashi

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Question about the programming of a legend

Hello everybody,
I have a question about the programming of a waveform's legend. I
already asked here in this forum about the legend programming (03)
months ago.
I went satisfied but I ve just noticed that this code
(See Code old_legend_test.llb with main.vi as main function) operates a
little different from my expectances.
Therefore I have a new question and I want to know if it
is possible by labview programming to plot and show, on a waveform
chart, a signal with activ plot superior to zero (0) without to be
obliged to plot and show a signal with activ plot equal to zero (0) or
inferior to the desired activ plot.
I give you an example
of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
and each signal corresponds respectively to a channel (Chan1, Chan2,
Chan3, Chan4). I want to control the legend (activ plot, plot name and
plot color) programmatically. Is it possible with labview to plot signal
1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
without to active the signal with the corresponding activ plot zero
(0)?
Let see the labview attached data
(new_legend_test.llb with main.vi as main function). When I try to
control the input selected values again I get them back but I don't
understand why they have no effect on the legend of my waveform chart.
Could somebody explain me what I m doing wrong or show me how to get a
correct legend with desired plots? Thank by advance for your assistance.
N.B.
The
both attached data are saved with labview 2009.
Sincerly,PrinceJack
Attachments:
old_legend_test.llb ‏65 KB
new_legend_test.llb ‏65 KB

Hi
princejack,
Thanks for
posting on National Instruments forum.
The behavior
you have is completely normal. You can control the number of row displayed in
the legend and this rows are linked to the data you send to your graph. Thus,
if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
which data you want to display in your graph using the property node (Active
plot and visible). But for the legend as you send 3 plots there is an array of
the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
this array but you cannot control the order in this array! So, to be able to
change this array you have to only send data you need to you graph. I'm not
sure my explanations are clear so I have implemented a simple example doing
that.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/
Attachments:
GraphLegend.vi ‏85 KB

Questions about user-defined functions

Hello all,
I've got some questions about user-defined function in a message mapping:
1) How can I get the current date/time in format yyyy-mm-dd hh:mm:ss ? What is the java code for this?
2) I want to use the StreamTransformation constant TIME_SENT, only this is not in the right time-zone.
It is GMT and it should be CET (1 hour difference). How can I convert this in Java?
Can somebody help me with this?
Thanks in advance.
Kind regards,
Marco van Iersel

Hi Marco,
If the date format is fixed as you have mentioned,please use this:
                                String test = "2009-03-27 23:15:30";
          String test1 = test.substring(11,13);
          if(!test1.equals("23"))
          int a = Integer.parseInt(test1);
          int b = a+1;
          System.out.println("b"+b);
          String c = Integer.toString(b);
                                test = test.substring(0,10)+" " + c + test.substring(13,19);
                                return test;
          if(test1.equals("23"))
          test = test.substring(0,10)+ " 00" + test.substring(13,19);
          return test;
                                else return "";
Kindly let me know if this works.
Thanks.
Regards.
Shweta

Question about the "iPod radio remote"

I assume the "radio remote" is the same for every country and is under software control. I want to buy in Canada but use in UK and Canada.
Has anyone got one and seen the RDS work, in the UK almost every FM channel is RDS. Do they have RDS in Canada (Toronto) can anyone confirm?
And of course it says FM so this again I assume no AM, not that I need AM it was just an interest in if it could do it.
What happens about headphones, you can plug a pair into the remote, can you still plug into the bottom of the iPod or does the remote connector get in the way.
What is the story with "line out" I use this all the time as I amp my headphones. So I assume you cant use line out? or is the remote a line out also.
And I assume the remote cable and you headphones act as the aerial, how is the quality? Is it any good indoors, some little FM radios I have used drop to mono indoors. Does this Apple one frop to mono if the signal is weak?
Someone that has one can perhaps answer
Cheers
Ray

I can at least answer some of the questions.
The RDS function on this radio/remote is poor in the
UK. You have to set the radio function on the iPod
to "Europe" and when you do this RDS info is not
displayed on almost all radio stations such as
Virgin, XFM, Capital, GLR, etc. It does display on
Radio 2 however. At least, this is my finding. So
it's unpredictable at best. Setting the radio to
"USA" on the iPod increases the likelihood of getting
the RDS to display, but the downside is that you can
then only tune the radio in increments of 2mhz which
is a bit awkward if your looking for 89.1mhz!
There are three settings for the radio which you
choose via the iPod. They are USA/Europe/Japan. No
setting for Canada, although I'm sure you will still
be able to use it over there as I can still use mine
here in the UK even if it's set to USA.
No, there is no AM radio.
You can plug headphones into the remote or the
headphone jack on the iPod, or both at the same time.
I'm not sure I understand your question about the
bottom of the iPod. The radio plugs into the iPod
via the dock connector.
There is no 'line out' on the iPod. If you mean the
one on the dock, then no you can't use it as you
cannot place the iPod into the dock whilst the
radio/remote is connected as they use the same
connector.
Yes the cable of the remote acts as the aerial.
Reception is surprisingly good where I am, but it
will of course depend on where you use it. I've
used it indoors without any drop in signal or it
dropping to mono.
Lastly, you need to update the software for both the
nano or the 5th generation for the radio to work
(after you do this a radio function appears in the
menu), and some users have found that doing this
screws up the iPod. I have mine working on both the
nano and the 5th gen without any problems.
There is a review of the radio/remote here. I like
mine and consider it a worthwhile accessory, but of
course there will be those who disagree.
iPod
Radio/Remote Review.
Thank you for the reply.
Think your right USA or Europe will work in Canada.
Yes I mean the line out via the dock, I just wondered if the remote become a line out socket (I also use a pocket dock for line out for headphone amp as I use a pair of Sennheiser HD600 with my ipod) but of course that is silly becasue you have a volume control on the remote and line out is normaly fixed.
Based on your views I shall get one in March when in Toronto
Cheers
Ray

Questions about the content of download meeting recording .zip file

I tried posting this on the resurrected Connect forum, but my Adobe ID wasn't recognized there....
Concerning the files that are included in the .zip file of the meeting recording that can be downloaded:
1) Is there any documentation describing the files and their contents (i.e. what each file represents, what each XML element and attribute in those files represent)
2) Are there any files that capture mouse movement on a shared desktop?
Thank you!

Hi Sean,
Regarding your first post:
Thanks Jorma! I don't have access to an FMS build at the moment but I'm quite certain it's there. As for contacting Jaydeep, I am 90% sure he authorized us to broadcast his email on here if folks had questions about the tool, but, in the case that I'm wrong and he didn't - I'm going to double-check first.
Regarding your most recent post..
"To be clear, the most critical goal I'm trying to accomplish is to create an automated process that will download the recording meeting at its highest quality in a consistent and reliable manner".
I personally believe this is possible; unfortunately, I haven't seen it done yet. If your recording contains:
- audio
- a camera feed
- screensharing
Then I think you might be able to get this going. If it contains shared content, like a shared PPT, this gets trickier.
"To do this, of course, I have to reproduce some of the functionality that Connect provides, starting and combining video and audio streams according to the instructions in the control files."
Exactly right. If your recording didn't contain shared content, then all you've got on your hands are a bunch of audio/video files that you could edit together as you wanted with your favourite video editing tool. If it contains shared content, here's (at a high level) what's happening.
For shared PPTs or FTContent files:
First (for version 9 recordings only), Connect reads the information on the Shared Content's location and SCO within mainstream and indexstream and validates it before loading it. I don't recall this happening to the same extent with version 8 or earlier, but maybe it was. Now, if the content is validated (ie. Connect can find it) the share pod will display as black, if it doesn't, you get an empty pod with an message like "No content is being shared" or something like that.
Connect then looks at the actual FTContent file, and loads the content that is to be shared using the file path and sco ID listed in here. It's important to note that the SCO ID and file path in here will likely not be the same as the original file you uploaded to your room, it's a new SCO id (I believe SCOs of this type are called referenced scos) and new path.
Now...if I was going to build some sort of player which would play all these files in one screen to make a recording...I might not want to use Connect's code here. If you know the file path to the shared content (from FTContent), you could easily view it with the content URL (conveniently also in FtContent). I'm not a coder, but I'm envisioning something like Presenter's GUI where you've got the presentation's content in the main area, and a video file (if there is one) playing back on the side.
Anyways, food for thought if you want to try to go about this. Connect recordings are incredibly complex and they come with a big learning curve, but if you can make sense of them the knowledge is quite valuable.

Question about the order to creating Account, Contact, Contact Role

Hi, my friends,
I have some questions about the order of creating Account, Contact, Contact Role, etc in Web Service 1.0. I could create them in the following case:
1. Insert Contact object and get contactId (now new contact exists in CRMOD)
2. Insert Account object with Contact Role child associated with contactId
My questions are:
1. Do we have the following order? Insert new Account with new Contact child and Contact Role child (Contact is new and does not exist in CRMOD).
2. Looks like system need accountId, contactId, etc to make the objects relationship. Is there other field having the same function?
Thanks
Ray

Hi Ray,
In response to your questions:
1. Do we have the following order? Insert new Account with new Contact child and Contact Role child (Contact is new and does not exist in CRMOD).No. Both the Account and Contact must already exist. The Role value is an attribute on the Account Contact relationship, this relationship must exist in order to assign a role value to it. This is consistent with the behaviour of the UI, when you press the New button on the Contact child applet, you are taken to the Contact New page where you can create a Contact record. Once you save, the relationship is created but you cannot assign a role value unless you click the Edit Roles link next to the new Contact.
2. Looks like system need accountId, contactId, etc to make the objects relationship. Is there other field having the same function?Correct, the system needs to know which Account/Contact pair is being assigned a role value. To do this the Account and Contact values must be uniquely identified using the Id values for each.
I hope this helps.
Thanks,
Sean
Edited by: Sean Duffy on Jan 25, 2010 10:11 AM

Question about the alarm function.

Similar Messages

Maybe you are looking for