Question about the chain step name in DEFINE_CHAIN_STEP

I have questions about the chain step name in DEFINE_CHAIN_STEP:
1. Can the step name be a number (e.g. "8")?
2. Should the step name be unique within a chain or across all chains?
I am having this exception:
ORA-25448: rule DMUSER.RULE_6_3707 has errors
ORA-22806: not an object or REF
After I changed the step names (in DEFINE_CHAIN_STEP), the chain seems to run fine.
Thanks,
Denny

The reason I asked about the step name is to confirm it can handle numbers (it looks it can handle it from the doc).
Why I changed the step names say from "11" to "21", the error goes away, that puzzled me. Because the way I defined steps and the rules for the steps were exactly the same. Just changing the step names made the error goes away?!
Thanks.

Similar Messages

Missing chain step name in events raised by the scheduler

I use events raised by the scheduler (SYS.SCHEDULER$_EVENT_QUEUE) to monitor scheduler chains processing.
For event_type = "JOB_STARTED" (chain step started in case of chains) in event message (sys.scheduler$_event_info) there is no log_id (log_id is null).
In user_scheduler_job_log view there is column job_subname that contains chain step name but this column is missing in the event message.
Is there any way to get chain step name for event_type = "JOB_STARTED"?
Job configuration:
dbms_scheduler.set_attribute(
name => job_name,
attribute => 'logging_level',
value => dbms_scheduler.logging_full
dbms_scheduler.set_attribute(
name => job_name,
attribute => 'raise_events',
value => dbms_scheduler.job_all_events
Database:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
OS:
CentOS - redhat-4
Regards
Mariusz

I want to track chain processing by dequeue messages from SCHEDULER$_EVENT_QUEUE.
Examples of messages automatically inserted by scheduler into SCHEDULER$_EVENT_QUEUE (user_data column from SCHEDULER$_EVENT_QTAB)
SYS.SCHEDULER$_EVENT_INFO('JOB_SUCCEEDED','CDWMAIN','JOB_NAME','2011-07-27 16:19:11.191969',0,NULL,0,340374,1,0,0,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL)
SYS.SCHEDULER$_EVENT_INFO('JOB_STARTED','CDWMAIN','JOB_NAME','2011-07-27 16:19:10.947994',0,NULL,1,NULL,0,0,0,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL)
SYS.SCHEDULER$_EVENT_INFO('JOB_CHAIN_STALLED','CDWMAIN','JOB_NAME','2011-07-27 15:45:13.727127',0,NULL,0,NULL,0,0,0,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL)
For event JOB_SUCCEEDED there is log_id = 340374 so we can find job_subname (chain step name) in log table.
For JOB_STARTED and JOB_CHAIN_STALLED there is no log_id so we do not know wich chain step in this case was started and wich chain was stalled.
JOB_NAME is the same for all steps in case of chain processing

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Question about the programming of a legend

Hello everybody,
I have a question about the programming of a waveform's legend. I
already asked here in this forum about the legend programming (03)
months ago.
I went satisfied but I ve just noticed that this code
(See Code old_legend_test.llb with main.vi as main function) operates a
little different from my expectances.
Therefore I have a new question and I want to know if it
is possible by labview programming to plot and show, on a waveform
chart, a signal with activ plot superior to zero (0) without to be
obliged to plot and show a signal with activ plot equal to zero (0) or
inferior to the desired activ plot.
I give you an example
of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
and each signal corresponds respectively to a channel (Chan1, Chan2,
Chan3, Chan4). I want to control the legend (activ plot, plot name and
plot color) programmatically. Is it possible with labview to plot signal
1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
without to active the signal with the corresponding activ plot zero
(0)?
Let see the labview attached data
(new_legend_test.llb with main.vi as main function). When I try to
control the input selected values again I get them back but I don't
understand why they have no effect on the legend of my waveform chart.
Could somebody explain me what I m doing wrong or show me how to get a
correct legend with desired plots? Thank by advance for your assistance.
N.B.
The
both attached data are saved with labview 2009.
Sincerly,PrinceJack
Attachments:
old_legend_test.llb ‏65 KB
new_legend_test.llb ‏65 KB

Hi
princejack,
Thanks for
posting on National Instruments forum.
The behavior
you have is completely normal. You can control the number of row displayed in
the legend and this rows are linked to the data you send to your graph. Thus,
if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
which data you want to display in your graph using the property node (Active
plot and visible). But for the legend as you send 3 plots there is an array of
the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
this array but you cannot control the order in this array! So, to be able to
change this array you have to only send data you need to you graph. I'm not
sure my explanations are clear so I have implemented a simple example doing
that.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/
Attachments:
GraphLegend.vi ‏85 KB

This is a two part question about the creative 16gb Zen?

8This is a two part question about the creative 6gb Zen? First of all, my battery life dropped very suddenly. One charge I was getting the full 30 hour battery life and the next it dropped to under ten. I tried using their tips on how to extend the battery life and I am still getting less than 0 hours of battery life. Why would it dropped more than half the amount between charges? I tried recharging it after it ran out and still the same thing. Any help?
Second, (I am adding this question because it might relate to the first in some way) my mp3 player has been behaving strangely lately. For example, some artists sometimes have letters removed or all but the first end up being removed. But, if you reset the player, the artists go back to the full name. Also, my player has been taking a little longer than usual to turn on. It takes about 30 seconds to turn on instead of the 5-0 that I'm used to. Does anyone know why this might be happening?
My Zen is only 4 months old, and I would be very upset it it's breaking already. Please, if you have any suggestions on how I can fix what's happening, post them. (Even if they?probably won't work, they're worth a try.)

< This is an unusual one; never heard of it before. All I can suggest is cleaning up and perhaps reflashing the firmware. If it still is doing this, then get the thing exchanged pronto.
My guess is that the problems are indeed closely related.

SUP - 2 questions about the CDB (cache database)

Hi,
I have 2 questions about the cache database and the cache groups:
1 - How does the "On demand" cache group policy exactly works? I know that online cache group is without storing any data on the CDB making direct requests to de backend from the device, the DCN is based on updating from the backend, the scheduled is based on a time period, but I don't understand how the "on demand" exactly works, and why it has a time period too.
2 - Is it possible to query the cache database table to check the data that SUP has stored? How can I do this?
Thank you!

I posted a similar question in SUP Apps project not too long ago and Paul Horan provided this useful reply:
Create a "Sybase ASA v12.x for Unwired Server" connection profile in the Enterprise Explorer. I named mine CDB.
: Host = localhost (or whatever the machine name is)
: Port = 5200
: Database name = "default"
: User Name = "dba"
: Password = "sql"
Obviously, change the userid/password to match, if you changed them during install time.
Connect, and you'll see the "default" database displayed.
Navigate down through the Tables folder, and the first subfolder is labeled something like [#should_delete_sk ...] Start there.
You'll see a bunch of tables with the naming convention "D1" + package name + package version + MBO name. These are the cache tables for the MBOs.

Muvo V200, question about the play m

Hello,I have a question about the play mode on my V200. I want to play the songs in a specific order (like in a playlist) but I don't find the way to do this. Can you help me please ?
Thanks
(sorry if I don't speak english very well, but I'm french )

Hi!
To get the tracks to play in a specific order, put numbers at the beginning of each file name. E.g.: file 'examplesong.mp3' would become '0_ examplesong.mp3' Don't spend years doing that manually though; the computer will do it for you! Click on 'my computer', then click on 'Muvo V200 media explorer'.. This shows the contents of your player. Choose the folder that you want to reorder the songs in...
( it's best to put the songs in folders, like you would in a floppy disk, as the muvo can only hold a certain amount in the root directory, and folders are great for organisation - eg: you can put one CD in each folder, and then the player will play all of the tracks in that folder before moving on to the next one )
...and click on it to display the songs. In the pictures along the top of the window, 4th from the right is an icon with a downward facing arrow and an A above a Z. Click on this, it's called 'custom sort'. You can then use the arrows at the bottom to change the order of your tracks to how you want them. Click OK, and they'll all be numbered (and so will play) in that order.
Hope that helps!
x

CBWFQ: Question about the output of "show policy-map interface" command

Hi everyone,
I have a question about the output of "show policy-map interface" command.
The following is the output of this command and lower side of the output shows
(total queued/total drops/no-buffer drops) 0/342/0
If the packets drop occur due to the situation of no enough buffer,
"no-buffer drops" counted up. But "no-buffer drops" has not been counted up.
The "no-buffer drops" is 0 (zero) but "total drops" are counted as 342.
I guess there are other factors except "no-buffer drops" to add "total drops".
But I can not find any information about "other factors".
So I would like to know the "other factors" added to "total drops".
reserch-3725#sh policy-map interface fastethernet0/1
FastEthernet0/1
Service-policy output: shaping
Class-map: kdpc (match-all)
146956873 packets, 115209221595 bytes
5 minute offered rate 156000 bps, drop rate 0 bps
Match: access-group name YOKOHAMA_to_CHINO
Traffic Shaping
Target/Average Byte Sustain Excess Interval Increment
Rate Limit bits/int bits/int (ms) (bytes)
9360000/9360000 58500 234000 234000 25 29250
Adapt Queue Packets Bytes Packets Bytes Shaping
Active Depth Delayed Delayed Active
- 0 146956724 3539850811 2960247 3851843541 no
Class-map: class-default (match-any)
552458414 packets, 249687580329 bytes
5 minute offered rate 242000 bps, drop rate 0 bps
Match: any
Traffic Shaping
Target/Average Byte Sustain Excess Interval Increment
Rate Limit bits/int bits/int (ms) (bytes)
3072000/3072000 19200 76800 76800 25 9600
Adapt Queue Packets Bytes Packets Bytes Shaping
Active Depth Delayed Delayed Active
- 0 552453209 573909865 30358216 2926188156 no
Service-policy : policy1
Class-map: dlsw (match-all)
979578 packets, 264843255 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group name acl-dlsw
Queueing
Output Queue: Conversation 137
Bandwidth 128 (kbps) Max Threshold 64 (packets)
(pkts matched/bytes matched) 20922/17371500
(depth/total drops/no-buffer drops) 0/0/0
Class-map: telnet (match-all)
29938 packets, 1806058 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group name acl-telnet
Queueing
Output Queue: Conversation 138
Bandwidth 64 (kbps) Max Threshold 64 (packets)
(pkts matched/bytes matched) 639/38900
(depth/total drops/no-buffer drops) 0/0/0
Class-map: class-default (match-any)
551448911 packets, 249420939729 bytes
5 minute offered rate 242000 bps, drop rate 0 bps
Match: any
Queueing
Flow Based Fair Queueing
Maximum Number of Hashed Queues 128
(total queued/total drops/no-buffer drops) 0/342/0
Your information would be appreciated.

Details infomatiuon regarding show policy-map interface
http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a008010dd6a.shtml
http://www.cisco.com/en/US/tech/tk543/tk760/technologies_tech_note09186a0080108e2d.shtml
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/qos_r/qos_s2g.htm#wp1146884

4 questions about the the top boxes - SD box and Home media DVR

Hello. I am going to be getting Fios soon and I have some questions about the boxes. I will be getting the Home Media DVR and 4 SD boxes.
1) Do these boxes have timers on them to set so the box can turn off at a certain time?
2) Do these boxes have parental control and if so is it good enough to block things that I do not want my child to see?
3) How many people can access the home media dvr at the same time to watch already recorded programs
4) If the Home Media DVR is in the family room can a record be started from the bedroom over the SD set top box (even an hd show)?
Thanks for any help.

I have been using two Standard Set Top Boxes for about a year. I have Parental Controls on and all channels locked. When I want to watch a channel, I tune to that channel, note the LOCKED message, which tells me to press the OK button to enter ther Parental Controls PIN and unlock the channel for viewing.
This has worked flawlessliy for the last year -- ON THE Standard STB's.
I just ordered the Home Media DVR STB to replace one of my Standardt STB..
On the Home Media DVR:
I can set the Parentals Control PIN and lock the channels, in the exact same way I did o nthe Standard STB's. However, when tuen to ANY channel, I still ge the LOCKED message and instructions to press OK to unlock the channel -- BUT no matter how I press the OK button, the Enter your Parental Conlrols PIN dialog box willl NOT open. Nothing happens -- you CAN NOT view any channel.
Again, it is the EXACT setup as for the Standard STB, but the OK button will NOT unlock any of the channels.
If you unlock all channels and LOCK the Ratings, the same problem recurs: OK buitton will never open the "enter your PIN" dialog box.
I have received two replacement boxes and have spent hours on the phone with some very capable and helpful Techs -- no luck.
Has anyone else had the same problem? Here's how to test your Home Media DVR:
1. Menu-Settings-Parental Controls.
2. You will be prompted to CREATE youre Parental Controls PIN
3. Enter you PIN twice.
4. Use the > button to scroll to Enable On/Off and set it on.
5. scroll down to Control Channels
6. Press > button to See Locked Channels
7. Scroll down to Add/Remove Channels
8. Scroll right to choose LOCK ALL
9. Press OK and then scroll to YES to lock all channels
10. Press EXIT to get out of settings.
11. All channels are now locked.
12. Go to any channel
13. A black screen will appear with a lock silhouette with the word LOCKED below, followed by instructions to Press OK to enter PIN and unlock this channel. (plus how to change locks...).
14.Press the OK button and, if it is working, you will see a dialog box at the bottom of the screen that is titled: UNLOCK, with the channel listed and the instructions to "Enter your PIN using your numeric pad on remote to naje this channel availabe for all users." THere's a PIN box, which shows asterisks for each number entered, with "Press Exit to Cancel" below.
15. On the Standard STB, it works exactly as described in steps 1 thru 14. On the Media Center DVR, it works up to step `13, but in 14, no matter how you press the OK button, the UNLOCK dialog box never pops us. The Remote STB light flashes on the remove and the REMOTE yellow light flashes on the DVR, but nothng happens.
If you have a Home Media DVR, can you please try this and see if it works?
Thanks,
John

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Questions about the Apple Developer Enterprise Program

Hi there,
i got some questions about the Apple Developer Enterprise Program:
- is there a way a company can create their own "AppStore" with only the APPs the employees should use?
- when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
Thanks in advance for answers!

Google: MDM

Two questions about the new iWeb

Hi
I've got two questions about the new iWeb.
1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
thanks

Ah well... thanks for the quick answer
Message was edited by: Guðlogi

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off.

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off. never had this trouble with my 3...I don't even want to talk to anyone on this phone! Is the sensor bad? That is what the AT&t rep suggested.

Restore as new... if the problem still continues then there is a hardware issue.
If it stops after a restore as new, then the issue is with the backup the device is currently setup with.

Question about the DB adapter

Question about the DB adapter
ns2006.0.7
Question:
It seems that we can only have 1 db adapter, but in the adapter defiition we have to specify the database. If I want to communicate to several different databases on different platforms, Oracle / SQL I need to install a DB adapter for each database connection.
I can't figure out how to add a second DB adapter, does anyone know how?
Thank you
Daniel
Safeway Inc.

Hi
We're new at developing our own agents etc. We've leveraged the supplied DB agent and written the relevant adapter, however we're struggling with the transformation.
Could I be cheeky and ask if anyone would be willing to share a transformation they have written for the DB adapter? Unfortunately no-one in our team has had past XML experience, so we're trying to backwards engineer from examples.
Thanks, Meghan

Question about the chain step name in DEFINE_CHAIN_STEP

Similar Messages

Maybe you are looking for