Question about the Cinema Displays

Hi,
Until now, I've used one LCD display as my monitory for everything - two computers, my gaming consoles, etc.
It's getting too old - and I want to replace it. Getting a Cinema display wouldn't be a problem in terms of using the computers on it, but I was curious:
Is there a possible way I can connect either RCA cables or HD / Digital cables to the display?
Either directly into it, or through an adapter, and so on.
Thanks

If you have no special need for a Cinema display specifically, it would be much simpler and possibly cheaper to get a brand like a Dell that has the multiple input ports, particularly the analog type you are interested in connecting. The Cinema displays are really meant to be driven by DVI only, and have no HDCP support for a direct digital video connection.
I could be wrong about some of this; the fact that these adapters exist indicate that some DVI adaptation may be possible, but I'll have to leave the ultimate answer to someone who's tried it.

Similar Messages

Question about the html5 display rule

/*html5 display rule*/
article, aside canvas, details, figcaption, figure, header, hgroup, menu, nav, section, summary {
display: block;
I have an html5 site that has both and internal and external style sheet. Does the above rule need to be in BOTH style sheets, or just the external one...?

I'm sorry, the point I was trying to make was it honestly doesn't matter "where" you put it (external or embedded), as long as it's there and isn't being overwritten by css from another source.
Which stylesheet do you use for the actual layout of the page?
That's where I would put it. Whether you want it there is up to you, it could be in either, but it's not needed in both. Your code will be lighter if you put it in the external file, since you would use the same file on every page, seems a waste to have to paste it into every page in the head section.
I usually put all of my css in one external file. Unless that file gets huge, then I will separate out layout from content style and have two external files.
There is literally no reason I can find to have your css embeeded in the <head> section of a page.

Firewire question for 30" Cinema Display

Hooked up display this afernoon. AWESOME. Have a question about the firewire that comes off the display -- there is a plug-in for the power adapter, the DVI, the USB and the firewire. oddly, the firewire does not fit into any of the three firewire ports on the PowerMac G5. This is one of the first models -- had to upgrade graphics card -- checked another G5 which is newer model --- same firewire ports. It appears only to have 3 gold spots inside (3 pins?) Anyone can shed any light on how I plug this in? Display works great without it --- am I guessing that without this plugged in I can't use the firewire ports on the actual display?
Emailing me at [email protected] is always an option. Thanks.
Power Mac G5 Mac OS X (10.3.9) 30" Cinema HD Display

Dual-link DVD cables near the bottom of this page
<http://www.gefen.com/kvm/cables/hdmi_dvi.jsp#dvidl>
The cables are M-M so, depending on the length, you will need a F-F gender changer
<http://www.worldofcables.com/store/viewItem.asp?idproduct=773>
or booster <http://www.gefen.com/kvm/product.jsp?prod_id=2938>
If you are really serious about electrical shielding in the room you may want to consider a fibre-optic DVI link
<http://www.gefen.com/kvm/product.jsp?prod_id=2600>
For the DC power, if you can't find a matching connector, just cut the cable and use your own connectors and wire to make an extension. Presumably, you have to run the wires through a filter where they enter the shielded room, so a ready-made extension cable wouldn't be enough, anyway.
Have you checked for electrical radiation from the display itself? It may need some metal mesh in front of the screen, attached to the metal case all around.

Macbook and the Cinema display

Hi,
I'm about to purchase a Cinema display for my Macbook, before doing so I have several questions.
In the Apple store at the Cinema display section there is told that the Apple displays are specially designed for the Mac Pro and Macbook pro's. I wonder if the displays work in the same way with my Macbook. I know that I need a Mini DVI to DVI cable. My question is if there are any disadvantages compared to the pro products. And I wonder if there are any users with experience related to the Macbook and the Cinema display.
regards,
Koen

I have a first gen macbook and a 23" cinema display. I can't compare directly to the pro products but, I am very happy with the display and how it works with my laptop. I get full resolution and a firebox/USB hub. It's pretty sweet. I would tell you that if you are about to buy a display I would hold off for the leopard anouncement, the rumor is apple will replace the current display line up.
wes

Question about the programming of a legend

Hello everybody,
I have a question about the programming of a waveform's legend. I
already asked here in this forum about the legend programming (03)
months ago.
I went satisfied but I ve just noticed that this code
(See Code old_legend_test.llb with main.vi as main function) operates a
little different from my expectances.
Therefore I have a new question and I want to know if it
is possible by labview programming to plot and show, on a waveform
chart, a signal with activ plot superior to zero (0) without to be
obliged to plot and show a signal with activ plot equal to zero (0) or
inferior to the desired activ plot.
I give you an example
of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
and each signal corresponds respectively to a channel (Chan1, Chan2,
Chan3, Chan4). I want to control the legend (activ plot, plot name and
plot color) programmatically. Is it possible with labview to plot signal
1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
without to active the signal with the corresponding activ plot zero
(0)?
Let see the labview attached data
(new_legend_test.llb with main.vi as main function). When I try to
control the input selected values again I get them back but I don't
understand why they have no effect on the legend of my waveform chart.
Could somebody explain me what I m doing wrong or show me how to get a
correct legend with desired plots? Thank by advance for your assistance.
N.B.
The
both attached data are saved with labview 2009.
Sincerly,PrinceJack
Attachments:
old_legend_test.llb ‏65 KB
new_legend_test.llb ‏65 KB

Hi
princejack,
Thanks for
posting on National Instruments forum.
The behavior
you have is completely normal. You can control the number of row displayed in
the legend and this rows are linked to the data you send to your graph. Thus,
if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
which data you want to display in your graph using the property node (Active
plot and visible). But for the legend as you send 3 plots there is an array of
the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
this array but you cannot control the order in this array! So, to be able to
change this array you have to only send data you need to you graph. I'm not
sure my explanations are clear so I have implemented a simple example doing
that.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/
Attachments:
GraphLegend.vi ‏85 KB

Switching to the cinema display by closing the macbook air

the nice feature of switching to the cinema display by closing the macbook air and reopening it to use the keyboard with a black (mb air-)screen -e.g.for shortcuts in CS5 or Cad -doesn't work any longer using OS X Lion which is quite annoying. Has anyone found a solution for this problem apart from the 'option with the magnet' ?
this keyboard shortcut puts both displays in hibernation mode
is there a keyboard shortcut which only puts the macbook (air) screen ( under Lion) to sleep ?
if not, this would be a helpful update for everyone using the mac with photoshop or autocad where keyboard shortcuts are constantly needed and handling would be far easier with all windows & task bars on the cinema display only.
Alternatively, has anyone a clue how to put the task bar from the macbook screen to the cinema display ?

I dont know about the putting the screens to sleep, but as far as the task bar goes, when you have both screens running you can go in to display settings and you should see both screens, you can drag the task bar from the air screen to the cinema display.

Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.

Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.

There is a US$10 adapter from old power adapter to new MacBook Pro.
MagSafe to MagSafe 2 Converter
The MagSafe to MagSafe 2 Converter allows you to use the MagSafe connector on your LED Cinema Display, Thunderbolt Display, or MagSafe Power Adapter to charge your MagSafe 2-equipped Mac computer.
For battery life, check the latest Software Update for the fix for most problems.

Question about the "iPod radio remote"

I assume the "radio remote" is the same for every country and is under software control. I want to buy in Canada but use in UK and Canada.
Has anyone got one and seen the RDS work, in the UK almost every FM channel is RDS. Do they have RDS in Canada (Toronto) can anyone confirm?
And of course it says FM so this again I assume no AM, not that I need AM it was just an interest in if it could do it.
What happens about headphones, you can plug a pair into the remote, can you still plug into the bottom of the iPod or does the remote connector get in the way.
What is the story with "line out" I use this all the time as I amp my headphones. So I assume you cant use line out? or is the remote a line out also.
And I assume the remote cable and you headphones act as the aerial, how is the quality? Is it any good indoors, some little FM radios I have used drop to mono indoors. Does this Apple one frop to mono if the signal is weak?
Someone that has one can perhaps answer
Cheers
Ray

I can at least answer some of the questions.
The RDS function on this radio/remote is poor in the
UK. You have to set the radio function on the iPod
to "Europe" and when you do this RDS info is not
displayed on almost all radio stations such as
Virgin, XFM, Capital, GLR, etc. It does display on
Radio 2 however. At least, this is my finding. So
it's unpredictable at best. Setting the radio to
"USA" on the iPod increases the likelihood of getting
the RDS to display, but the downside is that you can
then only tune the radio in increments of 2mhz which
is a bit awkward if your looking for 89.1mhz!
There are three settings for the radio which you
choose via the iPod. They are USA/Europe/Japan. No
setting for Canada, although I'm sure you will still
be able to use it over there as I can still use mine
here in the UK even if it's set to USA.
No, there is no AM radio.
You can plug headphones into the remote or the
headphone jack on the iPod, or both at the same time.
I'm not sure I understand your question about the
bottom of the iPod. The radio plugs into the iPod
via the dock connector.
There is no 'line out' on the iPod. If you mean the
one on the dock, then no you can't use it as you
cannot place the iPod into the dock whilst the
radio/remote is connected as they use the same
connector.
Yes the cable of the remote acts as the aerial.
Reception is surprisingly good where I am, but it
will of course depend on where you use it. I've
used it indoors without any drop in signal or it
dropping to mono.
Lastly, you need to update the software for both the
nano or the 5th generation for the radio to work
(after you do this a radio function appears in the
menu), and some users have found that doing this
screws up the iPod. I have mine working on both the
nano and the 5th gen without any problems.
There is a review of the radio/remote here. I like
mine and consider it a worthwhile accessory, but of
course there will be those who disagree.
iPod
Radio/Remote Review.
Thank you for the reply.
Think your right USA or Europe will work in Canada.
Yes I mean the line out via the dock, I just wondered if the remote become a line out socket (I also use a pocket dock for line out for headphone amp as I use a pair of Sennheiser HD600 with my ipod) but of course that is silly becasue you have a volume control on the remote and line out is normaly fixed.
Based on your views I shall get one in March when in Toronto
Cheers
Ray

Questions about the content of download meeting recording .zip file

I tried posting this on the resurrected Connect forum, but my Adobe ID wasn't recognized there....
Concerning the files that are included in the .zip file of the meeting recording that can be downloaded:
1) Is there any documentation describing the files and their contents (i.e. what each file represents, what each XML element and attribute in those files represent)
2) Are there any files that capture mouse movement on a shared desktop?
Thank you!

Hi Sean,
Regarding your first post:
Thanks Jorma! I don't have access to an FMS build at the moment but I'm quite certain it's there. As for contacting Jaydeep, I am 90% sure he authorized us to broadcast his email on here if folks had questions about the tool, but, in the case that I'm wrong and he didn't - I'm going to double-check first.
Regarding your most recent post..
"To be clear, the most critical goal I'm trying to accomplish is to create an automated process that will download the recording meeting at its highest quality in a consistent and reliable manner".
I personally believe this is possible; unfortunately, I haven't seen it done yet. If your recording contains:
- audio
- a camera feed
- screensharing
Then I think you might be able to get this going. If it contains shared content, like a shared PPT, this gets trickier.
"To do this, of course, I have to reproduce some of the functionality that Connect provides, starting and combining video and audio streams according to the instructions in the control files."
Exactly right. If your recording didn't contain shared content, then all you've got on your hands are a bunch of audio/video files that you could edit together as you wanted with your favourite video editing tool. If it contains shared content, here's (at a high level) what's happening.
For shared PPTs or FTContent files:
First (for version 9 recordings only), Connect reads the information on the Shared Content's location and SCO within mainstream and indexstream and validates it before loading it. I don't recall this happening to the same extent with version 8 or earlier, but maybe it was. Now, if the content is validated (ie. Connect can find it) the share pod will display as black, if it doesn't, you get an empty pod with an message like "No content is being shared" or something like that.
Connect then looks at the actual FTContent file, and loads the content that is to be shared using the file path and sco ID listed in here. It's important to note that the SCO ID and file path in here will likely not be the same as the original file you uploaded to your room, it's a new SCO id (I believe SCOs of this type are called referenced scos) and new path.
Now...if I was going to build some sort of player which would play all these files in one screen to make a recording...I might not want to use Connect's code here. If you know the file path to the shared content (from FTContent), you could easily view it with the content URL (conveniently also in FtContent). I'm not a coder, but I'm envisioning something like Presenter's GUI where you've got the presentation's content in the main area, and a video file (if there is one) playing back on the side.
Anyways, food for thought if you want to try to go about this. Connect recordings are incredibly complex and they come with a big learning curve, but if you can make sense of them the knowledge is quite valuable.

HT5463 Questions about the "Do Not Disturb" feature not addressed in documentation

Hello,
I have some questions about the "Do Not Disturb" feature which are not quite addressed by the documentation.
When DND is enabled, will badge app icons still be displayed?
When DND is turned off, either manually or automatically, will Notification Center banners be available for alerts which occurred while DND was on, or are they lost forever?
I guess the main questions is, is DND like an answering machine, which stores up your notifications until you are ready to deal with them? Or is it a return of the "turn off all notifications" feature that existed in iOS 4, albeit in a more evolved form?
Thanks,
- Steve

If you have a schedule set, but activate it manually, it will de-activate at the scheduled time anyway. It behaves perfectly on my 4S, my wife's 4, and both of our iPads.
If you have an iPhone 5, it could be tied to the known issue with automatic time set going Wonky on LTE networks. If that's the case, try disabling the automatic time set and see if it behaves itself.

SUP - 2 questions about the CDB (cache database)

Hi,
I have 2 questions about the cache database and the cache groups:
1 - How does the "On demand" cache group policy exactly works? I know that online cache group is without storing any data on the CDB making direct requests to de backend from the device, the DCN is based on updating from the backend, the scheduled is based on a time period, but I don't understand how the "on demand" exactly works, and why it has a time period too.
2 - Is it possible to query the cache database table to check the data that SUP has stored? How can I do this?
Thank you!

I posted a similar question in SUP Apps project not too long ago and Paul Horan provided this useful reply:
Create a "Sybase ASA v12.x for Unwired Server" connection profile in the Enterprise Explorer. I named mine CDB.
: Host = localhost (or whatever the machine name is)
: Port = 5200
: Database name = "default"
: User Name = "dba"
: Password = "sql"
Obviously, change the userid/password to match, if you changed them during install time.
Connect, and you'll see the "default" database displayed.
Navigate down through the Tables folder, and the first subfolder is labeled something like [#should_delete_sk ...] Start there.
You'll see a bunch of tables with the naming convention "D1" + package name + package version + MBO name. These are the cache tables for the MBOs.

Muvo V200, question about the play m

Hello,I have a question about the play mode on my V200. I want to play the songs in a specific order (like in a playlist) but I don't find the way to do this. Can you help me please ?
Thanks
(sorry if I don't speak english very well, but I'm french )

Hi!
To get the tracks to play in a specific order, put numbers at the beginning of each file name. E.g.: file 'examplesong.mp3' would become '0_ examplesong.mp3' Don't spend years doing that manually though; the computer will do it for you! Click on 'my computer', then click on 'Muvo V200 media explorer'.. This shows the contents of your player. Choose the folder that you want to reorder the songs in...
( it's best to put the songs in folders, like you would in a floppy disk, as the muvo can only hold a certain amount in the root directory, and folders are great for organisation - eg: you can put one CD in each folder, and then the player will play all of the tracks in that folder before moving on to the next one )
...and click on it to display the songs. In the pictures along the top of the window, 4th from the right is an icon with a downward facing arrow and an A above a Z. Click on this, it's called 'custom sort'. You can then use the arrows at the bottom to change the order of your tracks to how you want them. Click OK, and they'll all be numbered (and so will play) in that order.
Hope that helps!
x

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Questions about the Apple Developer Enterprise Program

Hi there,
i got some questions about the Apple Developer Enterprise Program:
- is there a way a company can create their own "AppStore" with only the APPs the employees should use?
- when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
Thanks in advance for answers!

Google: MDM

Question about the Cinema Displays

Similar Messages

Maybe you are looking for