Question about the ECC6 migration and the retrieving of partner's address
Hi experts,
I have already post a thread about the use of the table BUT021_FS instead of BUT020 for retrieving partner's standard address.
I do modifications to my specific programs.
But what about the standard?like BUA_BUT020_SELECT_WITH_PARTNER for example
If I read the standard code, I see that it is still using the indicator XDFADR to specify if this address is standard or not.
I am new at ABAP and I want to know your analyse about it.
So, my question is : Is the result of this FM (partner address) correct? what I mean to say if I will use this address to determine if it is a standard or not.
Best regards.
Hi,
I understood what you mean but I don't use this FM explicitly.
I am analyzing a CRM 7 dump and I see in the traces of st22 the use of this FM.
The dump appears when I create new Organization and Contact in CRM WebUI. May be it's a validation of fields of address.But I think, I must put this other thread in CRM, but I you had some experience with it, it would be very helpful.
Thank you for your help,
Best regards.
Similar Messages
-
Question about SAP + SLES10 + vSphere and the truth about memory
Hi,
we are using vSphere and SLES 10 for a SolutionManager 7.0 on MaxDB 7.6.
The system is configured with 2 GB RAM in the VM. The database is configured to use 125000 pages as cache (100000 KB).
Yes, I know the system is configured very small for this usage, but it is a demo system...
But the system is really slow. I can't figure out whats the problem.
The RAM is configured with 2 GB in the VM a "free" in linux shows me that there is 500 MB used for file system chache
total used free shared buffers cached
Mem: 2076908 2002704 74204 0 28936 578212
-/+ buffers/cache: 1395556 681352
Swap: 6185016 3037744 3147272
so this shoud be ok, for me it is close to the limit...
But VMware infrastruture client shows me, that there are only 300 MB of the 2GB is used ... but the database should use 1 GB and SAP should use some RAM , too.
So who tells the truth? Where does the RAM goes to if it is not used in VMware? Could this be the performance problem?
An other problem is, that the show dev_io of the database shows me very slow access to the files ...
i.e.
I/O via Device Processes:
UNIX Devspace Read avg_read Write avg_write
tid name count time count time
28596 /sapdata/SYS/sapdata/DISKD01 6532 0.0294 101 0.2077
But VMWare shows that there is nearly no usage of DISK ... average is shown as 150 KBps...
So again, who tells the truth?
What else could be the problem?
Thank you.
Best regards
Christian> I know 2 GB is less, but the system is still 32 bit Linux, so 6 GB is "impossible".
Why that? The 32bit limit is a per process limit, not a limit for the amount of total supported memory.
> During the long weekend the system is switched to an other VMServer I am going to request more RAM. What a pitty that 32 bit does not support more than 3 GB....
I don't know who told you that but it's wrong
> But there is still the question whats correct? The linux variant of free or the VMware infrastructure client monitoring the RAM?
> What could slow down the Database IO performance?
> USE_OPEN_DIRECT we are already using ...
Are you sure it's the I/O peformance? A couple of questions arise then:
- What filesystem is underneath?
- How are your data files distributed?
- What are your I/O times for a single I/O (you can switch that on using DB50 - TAsk manager - and press on the "clock", the time will then be displayed in the database analyzer.
If you use VMWare on a recent processor you can also switch nicely to a 64bit Linux.
Markus -
A general question about JPGs, color profiles and the web.
(Didn't get much help in the PS forum, so I'm gonna try this here.)
I save a website background image in Photoshop with its color profile (in this instance, Adobe RGB 1998).
When I view the image in IE (latest), it looks the same as it did in PS.
When I view it in Firefox (latest), it comes out darker.
I'm guessing this has something to do with one of the two browsers taking the color profile into account, and the other not.
What is everyone's solution to this problem? Should I not be including color profiles with my JPGs? And if that isn't the problem (ie, I should keep doing it), which is the color profile I should be using in RGB?
I keep hopping between Adobe RGB (1998) and sRGB 2.1 and can't decide which one to adopt once and for all.
Thanks.You are correct. The colors differ from IE to FF because FF and Safari use the color profiles found in your images.
You might like the discussion found on Usability Post: http://www.usabilitypost.com/2008/07/30/photoshop-color-profiles-for-web-images/
I've been using sRGB 2.1 for a few years and have had no major issues with it. -
Question about labview under linux and the using of CIN....
i have a problem with making Code Interface Node (CIN) with labview under LINUX... my goal is to make a CIN that can uses I2C interface (look to libk8000 from hihihihi), but it just work when i'm running it as ROOT ... is there a way to call the cin like as root.... thanks
Hello Mister Pouf,
Can you please explain more your problem? And give more details about it?
Have you receive error message?
Best Regards,
Sanaa TAZI
National Instruments France
Sanaa T.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> http://www.nidays.fr/images/081110_ban_nidays09_468X60.gif -
question about iCloud. How do I change my e-mail address, I got the wrong address.
There are a variety of options available to you, including creating an email "alias" or changing the email address associated with your iCloud ID.
For all practical purposes your iCloud email address and Apple ID are interchangeable. To change your Apple ID read Apple ID: Changing your Apple ID.
If you simply created an Apple ID in error, you might consider abandoning it altogether and creating a new one. On the other hand, if you already used that Apple ID to purchase iTunes or other digital content, don't create a new Apple ID, because any purchases you already made are inexorably linked to the Apple ID used to make them. -
What will i do? ITune screenshot is as follows >
There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.Do what it said to do.
"Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. " -
There is a problem with your iPhone.
Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
To find your nearest Apple Store, click here.
Please help me i can aktivate my phone imei 012423006333181.There is a problem with your iPhone.
Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
To find your nearest Apple Store
no imei also -
Questions about creating plugin_stage directory and creating the plugin
I am new with EM and am working on creating an EM plugin to monitor our web application by using JMX. I already have a very simple mbean server running and have generated very simple metadata and default_collection files. The next step should be to convert those files to an Oracle Plug-in Archive (OPAR), but before creating the OPAR, I seem need to create the plug-in stage directory which have various sub-directories and files. I searched the whole Oracle Enterprise Manager Cloud Control Extensibility Programer's Reference 12c Release 2 (12.1.0.2) and Programer's Guide as well as online, I couldn't find how the plugin_stage is created. I hope there must be a way to create that directory, or manually creating it will be tedious. Any pointer will be highly appreciated!
Thanks in advance!
-JCThere are two issues here. One is the structure of the staging area, and the other is how to do incremental development of a plug-in efficiently. Regarding the first, the directory structure is pretty straightforward and once established for a particular plug-in doesn't need to be changed unless you are adding support for some new subsystem (e.g. adding jobs). There is no tool to create the directory structure.
The question of doing incremental development is mitigated by allowing you to use the "emctl register metadata" command once the initial version of the plug-in is deployed. This allows you to modify metadata and reload that particular file without having to build and deploy a new version of the plug-in.
Bottom line is that there is no plug-in developer IDE so you'll have to work with the pieces that are there. We appreciate your feedback so please keep it coming as we look at improving the plug-in developer experience in future releases. -
Hello ,
I want to ask some question about ipads \
How powerful is the iPad?
How useful is it for reading books, newspaper or magazines or for surfing the web?
Can you identify any shortcomings of the device?
please help meit's less powerful than your average computer. THink of it like a netbook but with a better processor.
It'll do fine for surfing (although if you browse a lot of flash based sites you will need to get a third party browser since safari doesn't accommodate it)
You may do OK on reading books, papers or magazines, especially if they have apps, but the ipad's screen is backlit, so it doesn't work well outdoors and you may need to fiddle with the brightness so that you don't get eye strain (it's just like doing too much reading from a computer screen)
I would say the biggest short comings are data transfer. Apple's preferred work flow is that everything is done via iTunes or the internet....well people dont' always have 100% reliable always on internet access so you can find yourself in a situation where you can't get things on/off the iPad.
By and large, it's a good device for day to day stuff, but is not a computer replacement. -
It does not cover my question about in what order does the sync work?
It does not cover my question about in what order does the sync work?
Does the first signed on computer copy its information to the cloud?
Does the second computer/pad/cell then download the information from the cloud overwriting the information on the second device even if some of the information is different?
What happens to the information on the second device that is not in the cloud?
If you delete a record (eg a bookmark) from the second device how does it then delete it on the first device?
What are the keys to the different types of information?Hi I have answered you questions inline below:
Does the first signed on computer copy its information to the cloud?
Yes when you first set up the account or when you first add a device to the cloud, if it is not the first time, it will merge with the other data
Does the second computer/pad/cell then download the information from the cloud overwriting the information on the second device even if some of the information is different?
By default it merges. There is no option to change this.
What happens to the information on the second device that is not in the cloud?
It will sync at the next sync interval if that data is selected to sync.
If you delete a record (eg a bookmark) from the second device how does it then delete it on the first device? What are the keys to the different types of information?
It resolved the entry the next time the first and second device syncs. Can you elaborate on the second part of this question? -
Question
Went to Crossings Book Club website while there something popped up about the certificate for the website, i was going to copy it and send an email to the website to ask about the certificate. I got my cursor just inside the pop up and the whole computer shut down.If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs, then the machine shuts down and restarts. This sequence will repeat seemingly forever unless I shut it down manually.
I upgraded to Yosemite from Mountain Lion a couple months ago, skipping Maverick completely, and I've done any associated updates that Apple told me about. I don't recall which version of Yosemite I have, but I'm sure it is the "latest and greatest".
I've tried re-starting in Safe Mode / Safe Boot and that does the same thing as described above except without the endless restarts. Instead of restarting at some point, SafeBoot proceeds to the white screen and then it hangs until I restart it manually. (I've waited as long os 20-30 minutes with no response).
When I tried the option-command-p-r key combo I never get any chimes or other noises besides the original 1 time boot sound that you would expect to get when starting up a macbook pro.
I was using the mac quite normally (meaning I was doing work I normally do on it and there was no indication of anything wrong) immediately prior to this happening.
The machine is BootCamp(ed) with Windows 8.1 which I use from a VMWare virtual machine instead of natively so that I can have both OSes running at the same time. I also think this is unrelated to my problem. I have been using this setup for more than 2 years.
My upgrade to Yosemite was uneventful and I thought it went well and was very smooth. I don't want to lead attention away from Yosemite, but at this point my problem does not seem related to the upgrade.
Any help is appreciated.Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
while in email today, the computer began flashing. I had to turn off with button. When I turned it back on, I got the apple icon and the moving loading wheel. It would turn for about 60 seconds and then stop. I turned off again. I now have a black screen.
Hi wiesenruth,
If you are having issues starting up or booting your computer, you may find the following articles helpful:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Regards,
- Brenden -
Today (6/1) the "My Usage" shows .7GB used (about 1/4 of my 3GB shaded in the bar-graph), and the solid-green in the bar graph representing only 1 day in the billing cycle. I'm trying to make sense of it. My may statement shows 1.7GB - I think that's the period just ended.... and I can't imagine I've used 1/4 of my data already today before noon? I'm guessing the 'My Usage" screens are not quite coordinated with the billing cycle - anyone else have ideas?
... guess the reply via email method doesn't quite work - I'll re-post here via website
jejm1975
Thanks for your message, but I don't believe it applies to the situation I described.
What is described in my post is information from the Verizon website - My Verizon / View Usage.
It is not from my phone (which is not a Galaxy,btw) -
if i bounce my project the bounced file is not the same as the original.
it has about ten seconds at the beginning free and the end is 10 sec cut off.
what is the bug?
i start the bouncing with the transport lokator as 1 1 1 1
and ends where it sould be over.
but the first 10 seconds are silent then it starts with the beginning of the song and the last 10 seconds are cut off.hello,
this is a screeshot of my problem.
the first pic as it should be
second with my problem
this happens after some bounces and not regular.
i dont wont to have this.
i have two pics i would like sending to you.
thanx,
Maybe you are looking for
-
Problem description: my macbook is experiencing ui lag, slow animation when switching between space and in mission control. I just got this brand new laptop two months ago, really disappointed. can some please help me ? EtreCheck version: 2.0.11 (98)
-
Mavericks update needs all external drives?
You have projects and events that refer to media on missing hard disks. To ensure that this library has all the necessary media, connect the following hard disks and click Retry. Mavericks and FCP 10.1.i update: I don't have the ports to plug in all
-
In Firefox the control bar is gray and the play button kind of fades into the bar. In IE, it looks like it is suppose to - dark grey/black control bar with a big blue circle (on the left) with a bright white arrow inside of it (making it obvious as t
-
Store in iTunes 9 wants Safari 4.0.3 - but it's there!?
I have Snow Leopard, iTunes 9 and Safari 4.0.3 installed. When trying to connect to the Store, iTunes tells me it needs Safari 4.0.3 (which I have obviously). Software Update recognizes that and has nothing to offer for upgrading. I already reseted S
-
Forcing attachments to download from content outside portal framework
We are having an issue with binary content which resides outside portal framework in a separate system being downloaded by users. Whenever a page flow action is submitted and the binary data(xls, pdf, doc files etc) is returned by the system(document