Question about the effective radiated power of WRT54G wireless router

Dear Sir,
As I knew that the output power of this router is 18dbm (about 64mW), can I have more technical information of the WRT54G wireless router as follow :
Q1) What is the effective radiated power output of WRT54G ?
Q2) What is the gain of each antenna in the WRT54G wireless router ?
Q3) Are there any antenna product of your company which offer higher dB gain and can be used in this router?
Q4) Are there any router product of your company which has higher effect output power.  If yes, can you please offer a soft copy of the specification (including the effective radiated power output) of such router ??
I should be grateful if you can answer me through this forum
Many thanks.
Regards
Patrick from Hong Kong
(Mod Note:Removed email address.)
Message Edited by daikunzeon on 06-01-2007 03:02 AM

This is a community forum. Here are the people who use Linksys devices. Nobody from Linksys is here. For those details you have to contact Linksys. Go to their website and look for the "Contact Us" page.

Similar Messages

  • Questions about the Lenovo Slim Power Tip Notebook Adapter (part: 0B47048)

    Does anyone know what the female port on this power tip looks like? Is it a usb port, or something proprietary? I need to make a cable that will connect my laptop to a legacy charger, and for some reason lenovo doesn't sell that in the US.
    Using this adapter for the slim male power tip is my cheapest option to start with.
    Thanks!

    http://www.flickr.com/photos/lead_org/9132520765/
    Here you go.
    What do you mean by Legacy charger? you mean the round barrel charger head?
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • I'm wondering about the effects of power surges on a MacBook

    I'm getting a new camp, and I want to bring my laptop to it. Unfortunately it probably has power surges on a regular basis, and I would like to know if that will affect it.

    Power surges aren't good for any computer. You should make sure you've plugged it in to a good surge suppressor. It would probably be wise to have a spare power cable as well, as the only part I've ever lost in the power system of any Mac laptop has been the power cable... I've had a couple of the bricks on the ends get fried, but was lucky enough that the computer was just fine.

  • WRT54GS Wireless Router Connection Drop!!!

    Hey everyone, heres my rant. I have called technical support about a dozen or more times this past month for the connection drops from my WRT54GS Wireless Router. I only use 4 devices to go online;A computer running windows xp, my Xbox 360, my PS2 and my PSP. I always have problems with ALL the devices, of which only 2 are connected wireless, the Xbox 360 and the PSP. I have updated the firmware already but the problems persists, anyone have any suggestions? Because I am ready to throw this thing out the window! LOL Any help would really be appreciated because the tech supports can't help. BTW this is my 1st replacement, reason for this is I had the same problem with my original router. Also the connection is fine when I connect directly from the cable modem to my computer or Xbox 360. What do I do??

    hi....try a few things here......first off , change the MTU on the router to 1365 as it is the recommended value for the Xbox 360.....
    another thing that i would like to know is if u have forwarded the ports required for the xbox , the PSP and the PS2 ? ...
    in case u  have not , here are the ports that u will have to open on the router under the Port forwarding section..
    The PSP and the PS2 use the same ports :-
    TCP:- 10070-10080
    UDP :- 6000-6999
    The Xbox uses :-
    TCP :- 3074 & 88 ...
    let me know if u need any more information

  • A few questions about the ka790gx and dka790gx

    i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

    It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section.  There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
    As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
    The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
    """Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
    Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
    The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
    For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
    Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
    It's better than nothing, but only just."""

  • A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

    Hello everybody,
    SQL> SELECT * FROM v$version;
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE    11.2.0.1.0  Production
    TNS for Linux: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    SQL>
    OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
    Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
    So, here is how I proceed
    SET SERVEROUTPUT ON;  -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
    SET SQLBLANKLINES ON;
    VARIABLE mysid NUMBER
    VARIABLE myserial# NUMBER;
    VARIABLE saved_sql_id VARCHAR2(13);
    -- So first I store sid and serial# for the current session
    BEGIN
        SELECT sid, serial# INTO :mysid, :myserial#
        FROM v$session
        WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
    END;
    PL/SQL procedure successfully completed.
    -- Just check to see the result
    SQL> SELECT :mysid, :myserial# FROM DUAL;
        :MYSID :MYSERIAL#
           129   1067
    SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
    SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
    http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
    the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
    BEGIN
        SELECT prev_sql_id INTO :saved_sql_id
        FROM v$session
        WHERE sid = :mysid AND serial# = :myserial#;
    END;
    PL/SQL procedure successfully completed.
    SQL> SELECT :saved_sql_id FROM DUAL;
    :SAVED_SQL_ID
    9babjv8yq8ru3
    SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
    SELECT child_number, sql_id, sql_text
    FROM v$sql
    WHERE sql_id = :saved_sql_id;
    CHILD_NUMBER   SQL_ID          SQL_TEXT
    0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
    SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
    After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
    Problem with dbms_xplan.display_cursor
    This was precisely what I did
    SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
    and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
    are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
    Could anyone kindly make some clarification?
    thanks in advance,
    Regards,
    Dariyoosh

    >
    and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
    are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
    Hi Dariyoosh,
    SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
    Here below what Tom Kyte is explaining in this page:
    Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
    1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
    2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
    Al

  • Question about the programming of a legend

    Hello everybody,
    I have a question about the programming of a waveform's legend. I
    already asked here in this forum about the legend programming (03)
    months ago.
    I went satisfied but I ve just noticed that this code
    (See Code old_legend_test.llb with main.vi as main function) operates a
    little different from my expectances.
    Therefore I have a new question and I want to know if it
    is possible by labview programming to plot and show, on a waveform
    chart, a signal with activ plot superior to zero (0) without to be
    obliged to plot and show a signal with activ plot equal to zero (0) or
    inferior to the desired activ plot.
    I give you an example
    of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
    and each signal corresponds respectively to a channel (Chan1, Chan2,
    Chan3, Chan4). I want to control the legend (activ plot, plot name and
    plot color) programmatically. Is it possible with labview to plot signal
    1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
    without to active the signal with the corresponding activ plot zero
    (0)?
    Let see the labview attached data
    (new_legend_test.llb with main.vi as main function). When I try to
    control the input selected values again I get them back but I don't
    understand why they have no effect on the legend of my waveform chart.
    Could somebody explain me what I m doing wrong or show me how to get a
    correct legend with desired plots? Thank by advance for your assistance.
    N.B.
    The
    both attached data are saved with labview 2009.
    Sincerly,PrinceJack
    Attachments:
    old_legend_test.llb ‏65 KB
    new_legend_test.llb ‏65 KB

    Hi
    princejack,
    Thanks for
    posting on National Instruments forum.
    The behavior
    you have is completely normal. You can control the number of row displayed in
    the legend and this rows are linked to the data you send to your graph. Thus,
    if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
    which data you want to display in your graph using the property node (Active
    plot and visible). But for the legend as you send 3 plots there is an array of
    the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
    this array but you cannot control the order in this array! So, to be able to
    change this array you have to only send data you need to you graph. I'm not
    sure my explanations are clear so I have implemented a simple example doing
    that.
    Benjamin R.
    R&D Software Development Manager
    http://www.fluigent.com/
    Attachments:
    GraphLegend.vi ‏85 KB

  • Question about the animated Pen tool

    Hi,
    ive a question about the animated pen-tool.
    i draw a word, but my hand isnt very calm, so the result is what you see on the screenshot.
    Is there a possibility to reduce the points on the animated pen tool like in illustrator?
    i know in illustrator its possible, but i didnt found anything in after effects to do it.
    thanks for your help

    If you are using the Paint tools those options don't exist in After Effects. The only work around is to set a keyframe for the brush path, copy the keyframe, then go to Illustrator and in a blank document the same size as your layer paste. Once in Illustrator you can simplify the path, select it, copy it, then go back to After Effects and select the same keyframe then paste. If you get a mask instead of a new path delete the mask path, make sure you have only the original brush path keyframe selected, then go to Edit>Paste from the menu.
    It doesn't look like you're drawing a mask path. That might be a better way to go.

  • Question about some effect

    Hi,
    I was trying to find out  how it's made the effect from the website below, I mean the one from the packages in the middle of the website (Domain names, Email hosting ect), on mouse over the image is brighter, is it just a 'image swap' effect but how they put the text then? The second question is about the fade in and out of the text on the bottom of the website (Where is: Why choose Fasthosts) is it possible to do it in Dreamweaver or is this flash animation?
    Website: http://www.fasthosts.co.uk/
    Regards

    Ok, Gary gave the right answer about the middle section. Case closed.
    About the effect you're talking about at the bottom (I suppose it's the "Why choose Fasthost?" section), it's in JavaScript.
    To answer the question "is it possible to do it in Dreamweaver", you can do it by using Spry effect: Select the element you want to animate and in the Behaviors panel, select Effect and then the Appear/Fade (or Blind, which is similar). Enter the settings, and you have a Fade In effect (you may need to change the event, for example to use onLoad instead of onClick).
    You can go further (for example, to have many sentences like the other website does) by looking at http://labs.adobe.com/technologies/spry/samples/htmlpanel/html_panel_two.html
    If you don't want to use Spry, other JavaScript libraries (like jQuery) surely supports that.
    Also, you can look at their code...:
    2ticker.js
    3Scrolls the "Why choose Fasthosts" content in the footer
    4************************************/
    5
    6var intTotalItems = 0;
    7var intLastNumber = 0;
    8var objDiv, objContentDiv;
    9var tickerDelay = 4000;
    10
    11function startTicker() {
    12 objDiv = document.getElementById("contentscroller");
    13 objContentDiv = document.getElementById("displayedcontent");
    14
    15 if (objDiv && objContentDiv) {
    16 /* Loop through the contentscroller UL, give each LI
    17 an ID and save the list in an array */
    18 for (var i = 0; i < objDiv.childNodes.length; i++) {
    19 var item = objDiv.childNodes[i];
    20 if (item.nodeName.toLowerCase() == "li" && item.id == "") {
    21 item.setAttribute("id", intTotalItems);
    22 intTotalItems++;
    23 }
    24 }
    25
    26 // Add first load of content
    27 objCurrentContent = document.getElementById(intLastNumber);
    28 if (objCurrentContent)
    29 objContentDiv.innerHTML = objCurrentContent.innerHTML;
    30 intLastNumber++;
    31
    32 // And change it in ten seconds
    33 setTimeout("changeContent()", tickerDelay);
    34 }
    35}
    36
    37// Display the next content snippet in the list
    38function changeContent() {
    39 objCurrentContent = document.getElementById(intLastNumber);
    40 startOpacityChange('displayedcontent', 100, 0, 1000);
    41
    42 setTimeout("startOpacityChange('displayedcontent', 0, 100, 1000)", 1000);
    43 setTimeout("document.getElementById('displayedcontent').innerHTML = objCurrentContent.innerHTML;", 1005);
    44
    45 if (intLastNumber == (intTotalItems - 1))
    46 intLastNumber = 0;
    47 else
    48 intLastNumber++;
    49
    50 // Now do it all again (in ten seconds time)!
    51 setTimeout("changeContent();", tickerDelay);
    52}
    53
    54function startOpacityChange(strId, intOpacStart, intOpacEnd, intMillisec) {
    55 var intSpeed = Math.round(intMillisec / 100);
    56 var intTimer = 0;
    57
    58 if(intOpacStart > intOpacEnd) {
    59 for(i = intOpacStart; i >= intOpacEnd; i--) {
    60 setTimeout("changeOpacity(" + i + ",'" + strId + "')",(intTimer * intSpeed));
    61 intTimer++;
    62 }
    63 }
    64 else if(intOpacStart < intOpacEnd) {
    65 for(i = intOpacStart; i <= intOpacEnd; i++) {
    66 setTimeout("changeOpacity(" + i + ",'" + strId + "')",(intTimer * intSpeed));
    67 intTimer++;
    68 }
    69 }
    70}
    71
    72/* Change the opacity of a div (allowing for different browsers) */
    73function changeOpacity(intOpacity, id) {
    74 if(!IE7) {
    75 var objLI = document.getElementById(id).style;
    76
    77 objLI.opacity = (intOpacity / 100);
    78 objLI.MozOpacity = (intOpacity / 100);
    79 objLI.KhtmlOpacity = (intOpacity / 100);
    80 objLI.filter = "alpha(opacity=" + intOpacity + ")";
    81 }
    82}
    83
    84/* Detect IE7 to disable text fade */
    85var IE7 = false;
    86if(navigator.userAgent.indexOf("MSIE 7") != -1) IE7 = true;
    and it's application:
    <div id="helpquote">
    <div id="contentscrollercontainer">
    <ul id="contentscroller">
    <li id="displayedcontent" style="opacity: 1;">Affordable web hosting for small businesses.</li>
    <li id="0">We're the UK's largest web hosting company.</li>
    <li id="1">Secure, reliable web hosting comes with experience: Established 1999.</li>
    <li id="2">Small business web hosting services, from a company that knows your needs.</li>
    <li id="3">Expert 24x7 email & national rate phone support for all customers.</li>
    <li id="4">Affordable web hosting for small businesses.</li>
    <li id="5">30 day web hosting money back guarantee & free instant online setup.</li>
    <li id="6">Instant web hosting, including easy to use website builder.</li>
    <li id="7">Internet access, domain registration, email hosting and web hosting all in one place.</li>
    <li id="8">UK web hosting with UK servers.</li>
    <li id="9">Secure, reliable, quality web hosting.</li>
    <li id="10">Integrated domain name registration and web hosting.</li>
    <li id="11">We're the largest UK domain name registrant.</li>
    <li id="12">UK domain registration and web hosting gives priority search rankings.</li>
    <li id="13">UK web hosting also offers you the best performance and reliability.</li>
    <li id="14">Chosen by more web hosting professionals than any other hosting company.</li>
    </ul>
    </div>
    </div>
    Nelson

  • I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty?

    I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty? I want to know if the 3 year extended warranty covers what damage. Like water damage, accidental damage, lost or stolen macbook, manufactory defects, or any other kind of damage, maybe be even cosmetic damage. Can anyone help me?

    If you are talking about features of the MBP itself, as long as you are not looking at  the Retina models, then the memory you can upgrade yourself for a lot less than Apple charges, and that does not affect the warranty as Apple considers memory a user permitted upgrade.  Great sources are Crucial and OWC, both are Mac specialists and have on-line videos on how to do the install.
    If the 15" is what you are looking at, a good upgrade is the 7200 rpm hard drive, gives a little better performance over the standard 5400 rpm drive.
    The Hi Res screen is good if you do a lot of graphics work.
    Comparing the 13" amd 15" you will notice the 15" has a second, discrete graphic processor...helps when you get into heavy duty videos, games, graphics...but keep in mind that kicking in the second processor uses a lot of power and will run the battery down faster.
    If you are looking at the Retina models, then keep in mind there are no post-purchase upgrade options...you have to buy with everything you want at the start.
    Just some thoughts.

  • A question about the IE management of session id

    Hi, guys! I have a question about the IE browser management of session id.
    As we know, firefox browser will use cookie to record session id, so if we delete the cookie files then the client can't find target session.
    But it's not the same as IE browser.I found I already can find target session after I delete the cookies.
    Then I think maybe IE browser use URL rewrite mechanism(GET request) and hidden text mechanism(POST request), but I'm not sure!
    Or maybe IE browser use current IE window process's cache to record the session id?
    Please help me, thank you very much in advance!
    I'm Chinese, my English is so bad, please understand, thanks.

    Thank you for your answer, but I still have a question.
    Can you tell me how your deleting cookies works? I just use IE browser tools->Internet Options->Delete Cookies to delete my cookie, but the session still can be retrieved! Just like you said, the session id is kept in the memory.
    But if I use firefox to do the same operations, the session will can't be retrieved.Does that mean firefox not only delete cookies' files but also delete them in the memory.
    Can I use IE browser to do the same effect as firefox browser? And how to do? Thank you.

  • Re: Question about the Satellite P300-18Z

    Hello everyone,
    I have a couple of questions about the Satellite P300-18Z.
    What "video out" does this laptop have? (DVI, s-video or d-sub)
    Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
    What is the warranty on this laptop?

    Hello
    According the notebook specification Satellite P300-18Z has follow interfaces:
    DVI - No DVI port available
    HDMI - HDMI-out (HDMI out port available)
    Headphone Jack - External Headphone Jack (Stereo) available
    .link - iLink (Firewire) port available
    Line in Jack - No Line in Jack port available
    Line out Jack - No Line Out Jack available
    Microphone Jack - External Micrphone Jack
    TV-out - port available (S-Video port)
    VGA - VGA (External monitor port RGB port)
    Also you can connect it to your LCD TV using HDMI cable.
    Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

  • Questions about the Apple Developer Enterprise Program

    Hi there,
    i got some questions about the Apple Developer Enterprise Program:
    - is there a way a company can create their own "AppStore" with only the APPs the employees should use?
    - when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
    Thanks in advance for answers!

    Google: MDM

  • Some questions about the integration between BIEE and EBS

    Hi, dear,
    I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
    1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
    2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
    3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
    4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
    could anyone give some guide for me? I'm very appreciated if you can also give any other information.
    Thanks in advance.

    1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
    2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
    3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
    4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
    Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
    and many more docs on google
    Hope this helps

  • Two questions about the new iWeb

    Hi
    I've got two questions about the new iWeb.
    1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
    2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
    thanks

    Ah well... thanks for the quick answer
    Message was edited by: Guðlogi

Maybe you are looking for