Question about the example hfm sdk project HfmEAExtractSample

I am trying to open the hfm sdk sample project hfmeaextractsample,which is a vb.net project to call the extended analytic functions in vb.
it referenced several hfm dll, including Hsvmetadata.dll,Hsvsession.dll,Hsvstarschemaacm.dll and hsxserver.exe, from the guide it said I need to install the hfm client, I did, after that I found out these files were llocated at server, so I copied them to local pc. and tried to reference them in this vb project. I was able to reference the hsvmetadata.dll and hsvsession.dll, but the reference of the hsvstarschemaacm.dll and hsxserver.exe failed, anybody has idea how can I get this fixed?
maybe some of you has the experience to use this sample project.
thanks

I just tried to call the api to extract security file but failed. Investigated for some time and finally worked it out. Remember to do the following steps:
1. Copy the "Server" folder from the server in the install directory for referencing the related libraries e.g. HsvSession.dll, HsxServer.exe
2. Enable DCOM in the Financial Management Configuration Utility
Hope it helps

Similar Messages

A question about the example "Filter"

Hi,
I have a question about the example "Filter (The Filter example illustrates how to filter data using a butterworth filter)" in the measurement studio reference now, it is one of the analysis examples.
I load this example in Vc++, but when I compile it, the error messages are:
"'ButterworthHighPass' : is not a member of 'CNiMath'" ,
"'ButterworthHighPass' : undeclared identifier",
"'ButterworthLowPass' : is not a member of 'CNiMath'" ,
"'ButterworthLowPass' : undeclared identifier",
"'WhiteNoiseWave' : is not a member of 'CNiMath'" ,
"'WhiteNoiseWave' : undeclared identifier",
Can you tell me what is matter? and how can I solve it?
Thanks!

Hi,
I was hoping that you could tell me what version and edition you have of Measurement Studio. I also need to know if you are using .NET or 6.0. For example, "I am using Mesurement Studio Enterprise edition 7.1 for Visual Studio .NET."
Depending on the version that you have, different functions and controls are included. I believe that you may have an edition that does not include the Butterworth filter. Let me know and we can go from there.
Thanks,
Caroline
National Instruments
Thanks,
Caroline Tipton
Data Management Product Manager
National Instruments

Question about the relationship between a project and Mobile Me album

Hello esteemed members of the Aperture community
I have a puzzling issue. I have published a project on MobileMe. My project is arranged somewhat chronologically, and I want MobileMe to follow this. However, the MobileMe album in Aperture does not synchronize with the project, and subsequently, the gallery on MobileMe does neither. How do I tell the MobileMe album in Aperture to synchronize itself with my project, and update changes as I edit the project, or am I just totally confused...always a possibility?
Thanks in advance

You sort of answered your own question in the title: Your Mobile Me gallery is an album. By design, changing the sort order of a project does not affect the sort order of related albums and vice versa. You'll have to make those changes in the album to have them reflected in the gallery.
I know of no way to have an album synchronize with a project. (Note: if you make adjustments to images or delete images from a project, those changes will be reflected in the album, but the sort order will not.)
DLS

Question About the Pen Control in Project Siena

Hi, good day.
I'am working on some tech demos with Project Siena, and I need to use the pen control so that the user draw some lines in the main page of the app. I decided to hide the pen controls, so there's only a white canvas. Sometimes the user will need to erase
some strokes... and because I hide the controls, I need a way to toggle between Draw Mode and Erase Mode.
I added a Toggle Switch so that in the OnCheck method I could add this expression "PenMode!Draw" or "PenMode!Erase",
but it doesn't help. I think I am using a wrong way. Are there any suggestions on how to switch between draw and erase mode within the pen control, without showing the controls?
Also, is there any way to erase or reset ALL the strokes in the pen control? For example, drawing some lines inside the pen control, and that the user can clean all the strokes at once.
Thanks,
Antonio S.

Antonio,
It is possible to do both.
I have uploaded an example of this called Pen Control to the following:
https://onedrive.live.com/#cid=5CEEF21796F5830D&id=5CEEF21796F5830D%218724
For the Mode Toggle:
Set the Mode (Design > More > Mode) to CTRLpen
Create a Slider with the Min set to 0, and the Max set to 1.
Set the Slider's On Change to the following:
If(Slider1!Value = 0,UpdateContext({CTRLpen: PenMode!Draw}),UpdateContext({CTRLpen: PenMode!Erase}))
For the Erase All
Set the Pen's Clear to PenClear
Create a button.
Set the Button's On Select to the following:
UpdateContext({PenClear: true}); UpdateContext({PenClear: false})
Note:
CTRLpen and PenClear are names I made up. You can replace them with whatever names you want to use, as long as they are not names reserved by Siena.
-Bruton

Question about the size of my project

3.25 GB 20 or so tracks. a few plugins each a few software drums and synths. I getting overload warnings here and there. Not the I/O level the audio level. I look at the fear lilly Allen demo which has 50 tracks all sorts of plugins and a vid. 1.45 GB. I selected and deleted unused in audio bin and still the same. What am I missing. Logic Pro, IMAC 3.06 core 2 Duo 4 GB ram. Thanks Bill

cowbell bill wrote:
Still stumped, I've deleted all unused audio files, deleted all unused midi. Maybe a third of the project. I see nothing in the trash, Project size is still the same 3.25 GB. Bypassed all reverbs, And audio CPU level still maxing out in the red. What am I doing wrong. Thanks Bill
When you speak about project size, do you mean the size of the project file itself? Or of the entire project folder?
When you delete tracks or plugins from your project, you won't see anything in the trash, that is normal. Only when you delete an audio file from your disk +from within Logic+ you'll find that audio file in the trash.

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

About the specification of [app.project.file] from CS6

Hello
There is a question about the specification from CS6.
[app.project.file] included the project in the time when filing was held in CS5, but when it isn't preserved, null enters at CS6.
Isn't there a way to make [app.project.file] input a project by the way which doesn't indicate the dialogue?
In unskillful English, excuse me.

Hi Pavan,
Thanks for your post.
What’s the version of your TFS?
How did you specific the file path in InvokeProcess activity? Where you stored this batch file, under a local path in your build agent machine?
As the TFS Build will running on build agent machine, so you can create the batch file under a local path in your build agent machine, for example C:\BAT\test.bat, then specific in this “C:\BAT\test.bat” as the
FileName in your InvokeProcess activity. You can refer to Hari’s reply in this similar post:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/b8bcb19f-1296-441c-8356-e701b949445a/tfs-2010-how-to-execute-a-batch-file-after-build?forum=tfsbuild.
Each TFS build’s drop location copied from binaries folder, you can find the binaries folder from
C:\Builds\ID\teamprojectname\builddefinitionname\bin on build agent machine, so you can write your batch script to copy latest files form this binaries folder for each TFS Build.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Question about the DB adapter

Question about the DB adapter
ns2006.0.7
Question:
It seems that we can only have 1 db adapter, but in the adapter defiition we have to specify the database. If I want to communicate to several different databases on different platforms, Oracle / SQL I need to install a DB adapter for each database connection.
I can't figure out how to add a second DB adapter, does anyone know how?
Thank you
Daniel
Safeway Inc.

Hi
We're new at developing our own agents etc. We've leveraged the supplied DB agent and written the relevant adapter, however we're struggling with the transformation.
Could I be cheeky and ask if anyone would be willing to share a transformation they have written for the DB adapter? Unfortunately no-one in our team has had past XML experience, so we're trying to backwards engineer from examples.
Thanks, Meghan

Question about the programming of a legend

Hello everybody,
I have a question about the programming of a waveform's legend. I
already asked here in this forum about the legend programming (03)
months ago.
I went satisfied but I ve just noticed that this code
(See Code old_legend_test.llb with main.vi as main function) operates a
little different from my expectances.
Therefore I have a new question and I want to know if it
is possible by labview programming to plot and show, on a waveform
chart, a signal with activ plot superior to zero (0) without to be
obliged to plot and show a signal with activ plot equal to zero (0) or
inferior to the desired activ plot.
I give you an example
of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
and each signal corresponds respectively to a channel (Chan1, Chan2,
Chan3, Chan4). I want to control the legend (activ plot, plot name and
plot color) programmatically. Is it possible with labview to plot signal
1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
without to active the signal with the corresponding activ plot zero
(0)?
Let see the labview attached data
(new_legend_test.llb with main.vi as main function). When I try to
control the input selected values again I get them back but I don't
understand why they have no effect on the legend of my waveform chart.
Could somebody explain me what I m doing wrong or show me how to get a
correct legend with desired plots? Thank by advance for your assistance.
N.B.
The
both attached data are saved with labview 2009.
Sincerly,PrinceJack
Attachments:
old_legend_test.llb ‏65 KB
new_legend_test.llb ‏65 KB

Hi
princejack,
Thanks for
posting on National Instruments forum.
The behavior
you have is completely normal. You can control the number of row displayed in
the legend and this rows are linked to the data you send to your graph. Thus,
if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
which data you want to display in your graph using the property node (Active
plot and visible). But for the legend as you send 3 plots there is an array of
the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
this array but you cannot control the order in this array! So, to be able to
change this array you have to only send data you need to you graph. I'm not
sure my explanations are clear so I have implemented a simple example doing
that.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/
Attachments:
GraphLegend.vi ‏85 KB

Question about openning files using SDK 10.

I have written a Plug-In for SDK 9 that works wonderfully. One of the functions is for the user to be able to page (Next/Previous) between PDF files on our server. This functionality now longer works without crashing Acrobat 10. All I am doing is creating the URL path to the next/previous PDF, creating a CustomFileSys with the path and calling AVDocOpenFromFile.
Does this no longer work with Acrobat 10 SDK?
Thanks!

Should work fine, AFAIK.
For this level of issue, I would open a formal support request with developer support.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 10 Oct 2011 08:51:08 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Question about openning files using SDK 10.
Question about openning files using SDK 10.
created by Greggars<http://forums.adobe.com/people/Greggars> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3963065#3963065

This is a two part question about the creative 16gb Zen?

8This is a two part question about the creative 6gb Zen? First of all, my battery life dropped very suddenly. One charge I was getting the full 30 hour battery life and the next it dropped to under ten. I tried using their tips on how to extend the battery life and I am still getting less than 0 hours of battery life. Why would it dropped more than half the amount between charges? I tried recharging it after it ran out and still the same thing. Any help?
Second, (I am adding this question because it might relate to the first in some way) my mp3 player has been behaving strangely lately. For example, some artists sometimes have letters removed or all but the first end up being removed. But, if you reset the player, the artists go back to the full name. Also, my player has been taking a little longer than usual to turn on. It takes about 30 seconds to turn on instead of the 5-0 that I'm used to. Does anyone know why this might be happening?
My Zen is only 4 months old, and I would be very upset it it's breaking already. Please, if you have any suggestions on how I can fix what's happening, post them. (Even if they?probably won't work, they're worth a try.)

< This is an unusual one; never heard of it before. All I can suggest is cleaning up and perhaps reflashing the firmware. If it still is doing this, then get the thing exchanged pronto.
My guess is that the problems are indeed closely related.

SUP - 2 questions about the CDB (cache database)

Hi,
I have 2 questions about the cache database and the cache groups:
1 - How does the "On demand" cache group policy exactly works? I know that online cache group is without storing any data on the CDB making direct requests to de backend from the device, the DCN is based on updating from the backend, the scheduled is based on a time period, but I don't understand how the "on demand" exactly works, and why it has a time period too.
2 - Is it possible to query the cache database table to check the data that SUP has stored? How can I do this?
Thank you!

I posted a similar question in SUP Apps project not too long ago and Paul Horan provided this useful reply:
Create a "Sybase ASA v12.x for Unwired Server" connection profile in the Enterprise Explorer. I named mine CDB.
: Host = localhost (or whatever the machine name is)
: Port = 5200
: Database name = "default"
: User Name = "dba"
: Password = "sql"
Obviously, change the userid/password to match, if you changed them during install time.
Connect, and you'll see the "default" database displayed.
Navigate down through the Tables folder, and the first subfolder is labeled something like [#should_delete_sk ...] Start there.
You'll see a bunch of tables with the naming convention "D1" + package name + package version + MBO name. These are the cache tables for the MBOs.

Question about the custom panel language

I have a question about the custom panel language...
The document you provide seems to lack details on some features. Namely the icon and picture widgets. I see from looking at the examples and other vendor's web pages that these features exist, but I don't find any detailed descriptions of them in the documentation. Is there a more complete document describing these and other features...
http://www.adobe.com/products/xmp/custompanel.html
Alternatively, can someone fill me in on the syntax and options for at least the icon and picture widget. For instance, how do you load external icons or pictures...
Tom

Gunar,
It could be interesting to have something like
icon(url: 'http://www.adobe.com/Images/logo.gif', width: 20, height: 20);
or better
picture(url: 'http://www.adobe.com/Images/logo.gif', width: 20, height: 20);
for the pictures and
include(url: 'http://www.adobe.com/xml/custompanel/camera1.txt');
for include the cusmtom panel's dynamic portions
Juan Pablo

Question about the function module (RFC_READ_TABLE)

Dear everyone
Could I ask you a question about the function module (RFC_READ_TABLE)?
I was asked if it's possible to create a report which compares the data between different SAP systems (both production systems).
Now, the easiest way would be to use the function module (RFC_READ_TABLE) within a SAP infoset query (SQ01 type query).
But I heard the rumor that using the function module (RFC_READ_TABLE) is not advisable due to the security reason.
However, I am not exactly sure what sort of security problems this function module can possibly have...
Would you help me on this?
I also would like to know if using "remote enabled module" type function module can always overcome this possible security issue.
Or, are there any points that I need to be careful about even when I use "remote enabled module" function module?
Thank you very much in advance.
Takashi

Dear Fred-san
Thank you very much for your support on this.
But, may I double check about what you mentioned above?
So, what you were mentioning was that if some user executes the query with
the function module (RFC_READ_TABLE), under the following conditions, he can access to
the HR data even when he does not have the authorizations for HR transactions?
<Conditions>
1. the user has the authorization for HR database tables themselves
2. RFC_READ_TABLE is called to retrieve the data from HR database
<example>
Data: LF_HR_TABLE like DD02L-TABNAME value 'PA0000'.
CALL FUNCTION 'RFC_READ_TABLE'
   EXPORTING
    query_table                = LF_HR_TABLE
TABLES
   OPTIONS                    =
   fields                     =
   data                       =    .
But then, as long as we call this function module for a non-critical tables such as
VBAP (sales order) or EKKO (purchase order) within our query, it wouldn't seem to be
so security risk to use RFC_READ_TABLE...
Besides, each query (infoset query) has got the concept of user groups, which limits
the access to the queries within the user group.
※If someone does not belong to the user group, he cannot execute the queries within that
   user group, etc
So, my feeling is that even infoset queries does have authorization concept...
Would you give me your thought on this?
I also thank you for your information for SCU0.
That is an interesting transaction
Kind regards,
Takashi

Question about the example hfm sdk project HfmEAExtractSample

Similar Messages

Maybe you are looking for