QUestion about the Explorer for Data Files on Zen X

I would like to put some of my school document files and architectural drawings onto the Zen Xtra as a Hard Dri've, but do I need to install the CD that came with it before I can actually put files onto it's

Hey,
Unfortunately, the Zen does not show up as a dri've when you plug it into the computer (it's not just the xtra, the touch doesn't either), I understand the plight that you're going through. You will need to use the intallation disk to install Nomad Explorer because you can do a transfer like that. I shows up as an item in my computer, Once it finds the player there will be a music folder and a data folder, just open the data folder and drag and drop. Hope this hel
ps.
I have a school laptop where all my files are but unfortunately I don't have admin rights so I can't intall the software/drivers so I use my home network and cds as well as my flash dri've to move any new files over to my home desktop to transfer to my zen. It works well for a weekly backup, that sort of thing...Sorry but you'll have to use the install disk. As long as your an admin, no prob.
Wilco
Note: if you don't have the install disk visit Nomadworld.com and you can download Nomad ExplorerMessage Edited by wilco99 on 0-9-2005 09:54 PM

Similar Messages

Help required to understand the concepts for data files in tablespace

Hi Guys!
Conceptual understanding for data files.
A tablespace is having 2 datafiles.
What once the data files will get full? I know we can create data files but what if there is no space on the server for any additional file to be created?
Do we require to make the oldest file offline and move outside the environment?
Thanks

782790 wrote:
Hi Guys!
Conceptual understanding for data files.
A tablespace is having 2 datafiles.
What once the data files will get full? I know we can create data files but what if there is no space on the server for any additional file to be created?
Do we require to make the oldest file offline and move outside the environment?
ThanksIf the datafiles are full, there is not much that you would get from the "defragmentation" of the datafiles. It would be sort of like this in the start,
FFFFFFFFFFFFFFFFFFFFFFFFFF
Then it will be ,
FFFFFFFUUUUUFFFFFUUUUUU
So what you are going to get is something like this, (if would be done),
FFFFFFFFFFFFFUUUUUUUUUU
So that's how the datafile would like. But that won't give you much of the space anyways still. The option to add a storage must be there with you. The file being offline wont take away the space that it has already allocated. And moreover, doing so, would also impact the access to the data that it would be storing within it.
HTH
Aman....

I have a few questions about the warrenty for the iPhone 4

I just called technical support and they said since the vibrate on my phone is broken, they would send me a used phone, no cost to me. However, I have to send back my current phone and they said if they find out that I was the reason the phone is broken that they would have to charge me $300 for sending me the used one.
How could they know if it was my fault? As far as I know the vibrate just stopped working one day. What would have to be wrong with the phone for them to be positive that it was my fault? If they do come to the conclusion that it is my fault, how do they charge me? Can I cancel the order for the new one and just keep my old one?
My phone has minimal scratches on it, looks like it is practically brand new. If i receive the replacement phone tomorrow and change my mind, can I send it back with the prepaid label they send me?
Sure I would love a phone with vibrate in working condition but if it is going to cost me $300, I can deal without it.

@Dougnvic, no need to worry because I'm here to help! The vibrate function is very important especially when you're in a situation where you cannot have the ringer turned on.
If we replace your phone through the warranty you are only charged for the equipment if there is any damage on the phone. The normal wear and tare is expected and you will not be billed for the phone because of these scratches.
Once the phone is received it is inspected for any physical or liquid damage. If damage is found you are then billed for the phone and the charge will appear on your bill. You will also receive a text message advising you of the charge. Once you are billed the charge cannot be removed even if you return the replacement.
If you change your mind and do not want to have the phone replaced you can just return the replacement once you receive it and keep your current phone. Just use the prepaid return label that will be inside the box of the replacement.
If you are sure there hasn't been any damage then there is nothing to worry about. You will not be charged. You can also take the phone into a store and have a store representative take a look at the phone before you return it, if that makes you feel better.
John B
Follow us on Twitter @VZWSupport

Question about the requirement for goods issue from a delivery (VOFM)

Dear all
※Please note that this is related to the credit limit check.
I am trying to set up the SAP system, so that if the maintenance contract (rental document) is billed at least once,
the system would allow the user to bill the customer regardless of the credit usage (ex. 150%).
So I created the following routine for the credit check (in VOFM).
IF XVBAK-AUART = 'ZMZZ'.    --> Please note that ZMZZ is the document type of our rental document
   LOOP AT XFPLT.
       IF XVBUK-FKSAK = 'B' or XVBUK-FKSAK = 'C'.
We will not do any credit limit check for this item line.
            MOVE CHARX TO BYPASS-SECURITY.
            MOVE CHARX TO BYPASS-STATIC_LIMIT.
            MOVE CHARX TO BYPASS-DYNAMIC_LIMIT.
            MOVE CHARX TO BYPASS-DOCUMENTVALUE.
            MOVE CHARX TO BYPASS-CRITICAL_FIELDS.
            MOVE CHARX TO BYPASS-REVIEWDATE.
            MOVE CHARX TO BYPASS-OPEN_ITEMS.
            MOVE CHARX TO BYPASS-OLDEST_OP.
            MOVE CHARX TO BYPASS-DUNNING_LEVEL.
            MOVE CHARX TO BYPASS-USER1.
            MOVE CHARX TO BYPASS-USER2.
            MOVE CHARX TO BYPASS-USER3.
            EXIT.
      ENDIF.
           EXIT.
   ENDLOOP.
ENDIF.
Now, with the routine above, it became possible to bill customers regardless of the credit usage.
However, when we try to ship (posting goods issue) the item for that maintenance contract, when the credit usage exceeds 100%, the system rejects it with the error message below.
<Error message>
Static credit check: credit limit exceeded
Now, I want to set up the system, so that if the posting goods is for the item which satisfies the following condition,
the system would not reject the posting due to the error above.
<condition>
1. The item is for the maintenance contract which was billed at least once --> this means that this is not a new contract
※Please note that for new maintenance contracts (which is not billed even once), the system should not allow to post goods
   issue if the credit usage exceeds 100 %.
I looked into VOFM, and found out that we are using the following routines for posting goods issue.
<system routine>
13
<user routine>
113
But I didn't know where the error (Static credit check: credit limit exceeded) came from.
Could you tell me how to find (or where to modify) a location where I can make the modification in order to
satisfy our requirement?
Thank you very much in advance

Dear all
I was able to solve the problem by setting up the credit check routine for delivery notes, and assign it for "No credit check" field
in the automatic credit control (OVA8).
So, thank you for your help, everyone
Takashi

I have a question about the downloads for CS4.

I had to go back to CS4 Master Suite after my card was deactivated, because adobe got hacked and my credit card was compromised. Since I was in the middle of traveling and I'm still in a bad situation, because of it I am still on CS4. Which sucks for my workflow now.
Well, anyway... Sorry, still very frustrated.
When all that happened I had to download CS4 Master Suite from your site, because the disks are not with me. Photoshop continuously shutdown on me. If I attempt to move a layer up or down in the layers panel it froze and shutdown every freaking time. After Effects and Premier Pro could not export or render anything. Illustrator did what it's supposed to do most of the time. Photoshop, Illustrator, After Effects, and Premiere Pro are the only programs I use really. They are essential to my freelance work and I have had to turn away projects ever since this whole ordeal started last year.
About a month ago removed CS4 and downloaded Creative Cloud again, because I thought I was in a place were my bank could send me a card. Some how I received another monthly trial and everything was awesome again while I waited for my card. My card didn't come. The trial ended and now I'm right back to not being able to integrate with Cinema 4D and so on. Now that is not your fault. So, I'm not going there.
I did, once again, download the install file for CS4 Master Suite and install the same programs. They are just as problematic as they were the first time I used the .dmg file from your downloads site.
Now I know you are far away from CS4, but that is what I am on until I can get back to the US and get another card, because you don't accept paypal or anything else.
Is there anyway I can get an actual proper working install of CS4. I can work around all the features I lost if I can get a download that actually has everything it's supposed to have in it. I do not pirate software, which is why I went backwards. So, please, please, please, please do something about that .dmg that doesn't have everything need to make the program work properly.
Thank You,
From

Your technical issues have zero to do with the installers. Whatever is at play is rooted on your system, but you have not provided any specific system info nor crash logs. Pardon me, but "Photoshop is crashing" is a useful as my 88 year old grandma telling me her phone doesn't work...
Mylenium

Question about the arrangement of music files within an album

Hi all,
I used to have a cheap MP3 player that worked just like a portable hard drive--drag-and-drop and organized into folders. I wanted the quality of an iPod, but with the organizational convenience of my old player, so I decided to change the tags of all my MP3s so that the album titles were the titles of all my old folders. This basically worked--whenever a folder was organized by tracks, I would open up the album, and there were all my files, properly arranged. The problem is when the "album" wasn't actually an album. I tried to change all the track numbers to "1" hoping that the iPod would just then arrange the files in alphabetical order by title. But it doesn't. I can't figure out what system it uses, but I figured you might know. Here are the questions:
How does the 5G iPod determine the file order of tracks within an album when all the tracks have the same number?
and
If track number is the only thing it checks, is there any way for me to cheat and get the songs in alphabetical order without manually giving them all a track number?
and on an unrelated note
Anyone find the standard issue Apple earbuds to be too large? Any recommendations for slightly smaller earbuds that are at least at the same quality level? A few suggestions at different price levels would be appreciated. And I assume you already have a discussion for that, so a link would suffice.
Thanks,
John

wow that is crazy i can't believe it is able to transpose audio loops (not midi) to different keys. especially stuff with more then one note playing at the same time like guitar strum.
I know how to set up the key in logic and change it etc... i was really wondering how it is capable of doing this?? does it have some kind of melodyne or autotune built in to it?? i never heard of software being able to do this with pre recorded audio that plays more than one note at a time.
Message was edited by: smurffy

Question about the packages for OS Linux

Hi all,
this is little weird question but I could not find the answer on net so trying to get some out here:
I need to have list of package requires for oracle (9.2.0.4 & 10.2.0.4) vesion for OS Linux
I know it is old versions of oracle but app and management requires this soon!! please guide!!
thanks

Hi,
Below note mentioned required packages
Requirements For Installing Oracle10gR2 On RHEL 5/OEL 5 (x86_64) (Doc ID 421308.1)
For oracle 9i, below packages are required
$ rpm –q make-3.79.1
$ rpm –q gcc-3.2.3-34
$ rpm –q glibc-2.3.2-95.20
$ rpm –q compat-db-4.0.14-5
$ rpm –q compat-gcc-7.3-2.96.128
$ rpm –q compat-gcc-c++-7.3-2.96.128
$ rpm –q compat-libstdc++-7.3-2.96.128
$ rpm –q compat-libstdc++-devel-7.3-2.96.128
$ rpm –q openmotif21-2.1.30-8
$ rpm –q setarch-1.3-1
Kernel parameters
Kernel
Parameter     Setting To Get
You Started     Purpose
Shmmni     4096     Maximum number of shared memory segments
Shmall     2097152     Maximum total shared memory (Kb)
Shmmax     2147483648     Maximum size of a single shared memory segment
Semmsl     250     Maximum number of semaphores per set
Semmns     32000     Maximum number of semaphores
Semopm     100     Maximum operations per semop call
Semmni     128     Maximum number of semaphore sets
file-max     65536     Maximum number of open files
ip_local_port_range     1024 - 65000     Range of ports to use for client connections
rmem_default     1048576     Default TCP/IP receive window
rmem_max     1048576     Maximum TCP/IP receive window
wmem_default     262144     Maximum TCP/IP send window
wmem_max     262144     Maximum TCP/IP send window
For more information kindly refer installation guide
Thanks,
Krishna

Creating folders for data files on a Mac

On a Mac platform, I am interested in trying to programically create
folders (named by the user) for data files to be placed in. How can
this be done? Currently, if I send a path that includes new folders
that don't exist to the Write to Spreadsheet.vi, I get an error 7 (new
files don't exist). However if I manually create the folders before
executing the VI, the files are written correctly. How can I avoid this
last step. Any help would be greatly appreciated and I thank you in
advance.
Jon Caldwell
Biomedical Engineering, CSUS
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.

Figured it out...disregard message.
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.

Question about the Filter type for the trace provide "Microsoft-Windows-Kernel-File"

Hello all,
I have moved this question from the Windows
Server General Forum accorfing to the suggestion from Mr. Justin Gu
I have a question about the Filter function for the trace provider "Microsoft-Windows-Kernel-File".
I can find the Filter function with the following operation.
Mr. Justin Gu wrote:
> You create a Data Collector Set for the trace provider "Microsoft-Windows-Kernel-File" and finish completely, then you > can right click it and select Properties.
In the Properties dialog box, click Filter and
then select ‘Edit…’. You will be> able
to see the Filter type and Filter data in the Filter dialog box.
What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.

What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.
I'm looking for the same information.

Questions about the content of download meeting recording .zip file

I tried posting this on the resurrected Connect forum, but my Adobe ID wasn't recognized there....
Concerning the files that are included in the .zip file of the meeting recording that can be downloaded:
1) Is there any documentation describing the files and their contents (i.e. what each file represents, what each XML element and attribute in those files represent)
2) Are there any files that capture mouse movement on a shared desktop?
Thank you!

Hi Sean,
Regarding your first post:
Thanks Jorma! I don't have access to an FMS build at the moment but I'm quite certain it's there. As for contacting Jaydeep, I am 90% sure he authorized us to broadcast his email on here if folks had questions about the tool, but, in the case that I'm wrong and he didn't - I'm going to double-check first.
Regarding your most recent post..
"To be clear, the most critical goal I'm trying to accomplish is to create an automated process that will download the recording meeting at its highest quality in a consistent and reliable manner".
I personally believe this is possible; unfortunately, I haven't seen it done yet. If your recording contains:
- audio
- a camera feed
- screensharing
Then I think you might be able to get this going. If it contains shared content, like a shared PPT, this gets trickier.
"To do this, of course, I have to reproduce some of the functionality that Connect provides, starting and combining video and audio streams according to the instructions in the control files."
Exactly right. If your recording didn't contain shared content, then all you've got on your hands are a bunch of audio/video files that you could edit together as you wanted with your favourite video editing tool. If it contains shared content, here's (at a high level) what's happening.
For shared PPTs or FTContent files:
First (for version 9 recordings only), Connect reads the information on the Shared Content's location and SCO within mainstream and indexstream and validates it before loading it. I don't recall this happening to the same extent with version 8 or earlier, but maybe it was. Now, if the content is validated (ie. Connect can find it) the share pod will display as black, if it doesn't, you get an empty pod with an message like "No content is being shared" or something like that.
Connect then looks at the actual FTContent file, and loads the content that is to be shared using the file path and sco ID listed in here. It's important to note that the SCO ID and file path in here will likely not be the same as the original file you uploaded to your room, it's a new SCO id (I believe SCOs of this type are called referenced scos) and new path.
Now...if I was going to build some sort of player which would play all these files in one screen to make a recording...I might not want to use Connect's code here. If you know the file path to the shared content (from FTContent), you could easily view it with the content URL (conveniently also in FtContent). I'm not a coder, but I'm envisioning something like Presenter's GUI where you've got the presentation's content in the main area, and a video file (if there is one) playing back on the side.
Anyways, food for thought if you want to try to go about this. Connect recordings are incredibly complex and they come with a big learning curve, but if you can make sense of them the knowledge is quite valuable.

Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

Hi ,
You might want to refer the following link to find your serial number and activate your software .
Here is the link for the same.
https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Let us know how it goes .We'll do the best possible to get your issue fixed.
Regards
Sukrit Dhingra

Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

Check exception list of your Firefox password Manager and check if your site is there or not?
* http://kb.mozillazine.org/User_name_and_password_not_remembered#Password_Manager_settings

Change default app for DAT files as the su

Hey
I do a lot of work in the terminal and it's sometimes convenient to be "su" permanentely instead of login in and out of the root account. The problem is whenever I try to open a DAT file, it tries to open it with, of all the apps in my Mac, HP Photosmart or something like that -.-
I've done the "cmd+i -> change all" several times now and it only worked for the non-root user...
Does anyone know how to change the deafult app for DAT files as the su (maybe the command line(s) for doing so)??
It's not like it's a life or death thing, it's just that it's a bit annoying having to constantly write "-a Microsoft\ Excel" whenever I want to open such a file (which can be several dozens of times in an afternoon and since the names of the files may change it won't suffice to 'arrow up' to the line previously used =\)
Much appreciated

I'll try that, thanks
I sometimes need it 'cause of permission issues of the files...
(E.g., Some file is sent to me or I'm logged as su to install something using ports and compile/run programs and the output files generated are only readable/editable as su... As I said, it's not a life/death thing, just wanted to know if anyone knew how to fix it once and for all )
I'll post the result as soon as I've tried the proposed solution

Few questions about "city explorer"

- I noticed it can tell me where the metro is, but could nokia maps + city explorer tell me what line should i take in the metro and which station i should go out?
- Does it all require data transfering while i'm walking, or can i donwload it all before, where i have wifi? (like nokia map-loader)
- same question about the guides...
Thank's!

You can find most of the answers here - or to links to the answers -
http://help.sap.com/businessobject/product_guides/boexplXI32/en/exp_acc_admin_en.pdf
I haven't used the Explorer accelerated for a long time, but as far as I remember in rsddstat i think you can identify the explorer usage from the user id, but not sure - try and see.
You can also run all your BIA indexes at the same time if you want to, the algorithm takes care of the table locks and switch to other index
Querysnap shot index is a SNAPSHOT of the data at the time of the index - it will never change unless you re-run the query and index it. Regular BWA indexes gets updated when you load data to underlying cubes and run BWA rollups/change runs. The querysnap shot data will not change. I like them if my query output miliions of lines - such as ZCUSTOMER. With query snapshot, you can put all of them to explorer for customer segmentation etc purposes
Cheers
Tansu

I got an answer and I replied with a question about the answer, does no show in unanswered

I got an answer and I replied with a question about the answer, does no show in unanswered questions. I guess replying was not the way to get another anwer, How do I do that?
He said - Certain Firefox problems can be solved by performing a Clean reinstall. This means you remove Firefox program files and then reinstall Firefox.
I want to know - Will I still have my bookmarks, history, addons, plugins, etc.? I do not know what plugins and such that I had. What about my pinned tabs and my tabs that where open.
More information - When I try to start Firefox I keep getting the message that I need to restart my computer in order to complete a previous update attempt. I had Sweetpacks on my PC and I do not know where it came from, it took over my home page in Internet Explorer and Ithink caused the issue with Firefox.
Should I do the clean install or try starting Firefox now.

Could you please stay in the thread where you posted the question and reply there instead of opening a new thread?
Locking this thread, so please continue here:
*[[/questions/968194]]
See also:
*[[/questions/968222]]
You won't lose bookmarks and other data in the Firefox profile folder as long as you do not remove personal data in case you uninstall Firefox.
See also:
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/kb/Backing+up+your+information
You can open the Properties of the Firefox desktop shortcut via the right-click context menu and check the "Compatibility" tab.<br />
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.

QUestion about the Explorer for Data Files on Zen X

Similar Messages

Maybe you are looking for