Question about the EXSP24 sampler (or any other samples) bundled with Logic

Are there any Clarinet samples in Logic?
Are there any French Horn samples in Logic as well?
I'm not looking for loops, just samples (like the ones for trumpet, tenor sax etc.)
If not, how would I find these and place them in the application so I could use them in Logic Express.
Thanks from the NEWBIE.
Mark

I think you probably mean the Garageband instruments that you use with Logic - I'm not sure if Clarinet and French Horn come with Garageband so if they aren't there you'd need to buy the appropriate Apple Jam Pack or get something similar elsewhere (Google 'Orchestral samples' for some free ones) - the Jam Packs are pretty good quality sounds on the whole and good value for money.
If you want something better quality you'd need to be looking at something like the Mirosalav Vitous sets which are very pricy but you can get brilliant results from them with a bit of effort.

Similar Messages

I have a question about the calendar on the ipad2. I have multiple calendars in different colors. Some of the events are filled in with color. Others are just listed with a colored dot in front of the event. Any ideas why events ar showing up differently?

I have an ipad2 and my question is about the calendar. I set up multiple calendars with different colors. Some of the events show up in filled color. Others only show with a colored dot in front of the event. I can't figure out why some show up one way and others show up differently? Any thoughts?

On mine the ones that show on a coloured background are all-day events, the ones with dots and just timed events.

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello. I can say that you have a quite strange „huge question”… It’s non-sense to stay connected with your car which is hundreds miles away. Unless…
I have a theory. You don’t want to controll your car, you want to controll somebody who is driving the car. Volvo XC 60 is a nice family car, usually used by married men between age of 35-45, probably with small children, so it’s very unlikely that you want to controll your teanage kid, mainly because probably even if you would give him/her to drive the car in the neighborhoud, I don’t think that he/she would be „several hundred miles away”… If your child is not young teneage anymore, and he/she has his/her own life, but you want to control him/her, that is sick… So I am convinced that you want to controll your husband who probably travelling often! Am I wright?
Isnt’t nice at all! Would you like if you would be monitorized in such way? I bet you don’t!
Anyway, iPhone is smart, you can use for many things, but come on, you really were thinking that there is such kind of application???
What could you do it's to put in the car a GPS survelling system, however I don't think that you could do it without your husband knowledge, otherwise he won't be able to start the engine...

I have an app idea project going on but I have no access to itunes connect so I can send my idea to the app developers and see what their opinion is about it.Do you know any other ways that can help me promote my idea so it can be further developed?

I have an app idea project going on but I have no access to itunes connect so I can send my idea to the app developers and see what their opinion is about it.Do you know any other ways that can help me promote my idea so it can be further developed?

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

HT5577 Hi, I can access my account, i have my username and password . But I forget my answer of the security question. And I lost the reset email. Any other way I can reset the reset email? I still have my redeemed gift card money in there.

Hi, I can access my account, i have my username and password . But I forget my answer of the security question. And I lost the reset email. Any other way I can reset the reset email? I still have my redeemed gift card money in there.

You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(93082)

Mid-2013 Macbook Air: question about the battery life

First of all, I'm sorry if these questions have been already asked, I've looked around and I've seen some answers, but none that fit my specific case.
I have had this computer since December (Macbook Air, 13'', Mid-2013), I've been using it for a month now. At the beginning, I used to use it until my battery was low (between 10 and 20%) and then charge it. Then I learnt that it's better to keep it plugged as much as possible (I have read this in other discussions and on the Apple page). The problem is that my battery is no longer a 100% of its capacity according to Cococnut Battery. It started with 99%, then back to 100%, then 98, 97... and now it varies from 97 to 98 (right now it says that my computer's current capacity is 6948 mAH). I don't know if this is normal, or if this is caused by the use I used to give to my macbook air at the beginning or by any other thing. I also have 19 loadcycles already. Besides, I have noticed that sometimes it jumps form 100% to 99% of battery pretty fast when I don't have it plugged, and I'm not sure if that happened before.
This is my first time dealing with a macbook and I don't know how these things are supposed to work, and I'm worried my battery might have any kind of problem and that's why itdoesn't have full capacity anymore, since I've been using it for only a month.
Also, sometimes it takes a little while to shut down. It usually takes 2 seconds, but sometimes it takes longer, maybe 20 seconds (first the screen turn white, then the loading icon appears and then it finally shuts down). Is this normal too for macbook airs?
Thanks for the help!

Those are only averages, for purposes of the battery 97 98 99 and 100 are the 'same thing'........theyre all estimates.
Normal on shut down, sometimes you can see a few seconds, sometimes 10, 15 seconds shut down.....depends on what and HOW much its shutting down before poweroff.   Normal.
ON BATTERY USE:
Keep it plugged in when near a socket so you keep the charging cycles down on your LiPo (lithium polymer) cells / battery, but not plugged in all the time. When not being used for several hours, turn it off.
http://www.apple.com/batteries/notebooks.html
"Apple does not recommend leaving your portable plugged in all the time."
General rule to remember of Lithium batteries is:
Never drain them LOW & dont always/often store them HIGH
While cycle count is commonly seen to be the “miles” on your Lithium Ion pack cell in your Macbook, which they are, this distinction is not a fine line at all, and it is a big misconception to “count charge cycles”
*A person who has, for example, 300 charge cycles on their battery and is recharging at say 50-60% remaining of a 100% charge has better battery usage and care than another person who has 300 charge cycles at say 15% remaining on a 100% charge.
DoD (depth of discharge) is far more important on the wear and tear on your Macbook battery than any mere charge cycle count. *There is no set “mile” or wear from a charge cycle in general OR in specific.    As such, contrary to popular conception, counting cycles is not conclusive whatsoever, rather the amount of deep DoD on an averaged scale of its use and charging conditions.
                          (as a very rough analogy would be 20,000 hard miles put on a car vs. 80,000 good miles being something similar)
*Contrary to some myths out there, there is protection circuitry in your Macbook and therefore you cannot overcharge it when plugged in and already fully charged
*However if you don’t plan on using it for a few hours, turn it OFF (plugged in or otherwise) ..*You don’t want your Macbook both always plugged in AND in sleep mode       (When portable devices are charging and in the on or sleep position, the current that is drawn through the device is called the parasitic load and will alter the dynamics of charge cycle. Battery manufacturers advise against parasitic loading because it induces mini-cycles.)
Keeping batteries connected to a charger ensures that periodic "top-ups" do very minor but continuous damage to individual cells, hence Apples recommendation above:   “Apple does not recommend leaving your portable plugged in all the time”, …this is because “Li-ion degrades fastest at high state-of-charge”.
                    This is also the same reason new Apple notebooks are packaged with 50% charges and not 100%.
LiPo (lithium polymer, same as in your Macbook) batteries do not need conditioning. However...
A lot of battery experts call the use of Lithium cells the "80% Rule" ...meaning use 80% of the charge or so, then recharge them for longer overall life.
Never let your Macbook go into shutdown and safe mode from loss of power, you can corrupt files that way, and the batteries do not like it.
The only quantified abuse seen to Lithium cells are instances when often the cells are repeatedly drained very low…. key word being "often"
Contrary to what some might say, Lithium batteries have an "ideal" break in period. First ten cycles or so, don't discharge down past 40% of the battery's capacity. Same way you don’t take a new car out and speed and rev the engine hard first 100 or so miles.
Proper treatment is still important. Just because LiPo batteries don’t need conditioning in general, does NOT mean they dont have an ideal use / recharge environment. Anything can be abused even if it doesn’t need conditioning.
From Apple on batteries:
http://support.apple.com/kb/HT1446
http://www.apple.com/batteries/
Storing your MacBook
If you are going to store your MacBook away for an extended period of time, keep it in a cool location (room temperature roughly 22° C or about 72° F). Make certain you have at least a 50% charge on the internal battery of your Macbook if you plan on storing it away for a few months; recharge your battery to 50% or so every six months roughly if being stored away. If you live in a humid environment, keep your Macbook stored in its zippered case to prevent infiltration of humidity on the internals of your Macbook which could lead to corrosion.
Considerations:
Your battery is subject to chemical aging even if not in use. A Lithium battery is aging as soon as its made, regardless.
In a perfect (although impractical) situation, your lithium battery is best idealized swinging back and forth between 20 and 85% SOC (state of charge) roughly.
Further still how you discharge the battery is far more important than how it is either charged or stored short term, and more important long term that cycle counts.
Ultimately counting charge cycles is of little importance. Abuse in discharging (foremost), charging, and storing the battery and how it affects battery chemistry is important and not the ‘odometer’ reading, or cycle counts on the battery.
Everything boils down to battery chemistry long term, and not an arbitrary number, or cycle count.
Keep your macbook plugged in when near a socket since in the near end of long-term life, this is beneficial to the battery.
Peace

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

A few questions about the FCE interface

I'm new at FCE, but I've done video editing for a few years in Windows (Vegas Movie Studio mostly, it was pretty good but limited in the number of video and audio tracks). I've finally made the jump to Mac and I'm excited getting started. The ability to do keyframes and motion is outstanding and I can't wait to play with LiveType and Soundtrack.
There's a few things I'm not sure I understand about the FCE interface. I'm working on my first project and it's going to me mostly made up of short (4-10 second) video clips and still photos (with pan and zoom and some motion) and background music. I've done several of these in the past in other software, this project is my learning one for FCE.
However, I can't understand why some things happen they way they do. If I drag a clip or still from the bin to somewhere in the middle of my existing sequence where there are no items on the video track, it 'parts the seas', moving all video on all tracks to the right and cuts my audio track wide open leaving a huge gap to make room for the clip or still even if it has no audio. The same thing happens in reverse if I'm deleting a still or clip, it chops it out and scoots everything over. I think I want to manage my own gaps rather than FCE trying to manage it for me. Does this have something to do with ripple editing - something that I must not have learned in my Windows video editing experience?
I've ordered a few tutorial books based on recommendations in this forum, they're on their way. I didn't expect to be immediately proficient, but it seems I'm not understanding something fundamental about the interface.
There's other questions too, like when I move a video clip from one track to another (up or down, not left or right), why does it move the audio portion of that clip to another audio track? Sometimes it stomps on something I already had on that track. Can't I unlink those somehow?
When I bring two clips or stills together and attempt to overlap them (which I think should mean I'm doing some type of transition), it seems to just truncate one or the other. I suppose I just need to get used to that?
Thanks for any suggestions you may have.
iMac 20" intel Mac OS X (10.4.10)

You need to get comfortable with targeting your tracks and, as mentioned, locking off tracks you don't want to affect.
You say you want to add a clip/still to the "middle" of a sequence ... I take it there are clips to either side of this spot that you don't want to affect. Then I would set In and Out (I and O) points in the timeline to define the space you want the clip to occupy. If you don't want audio to carry over, then lock off whatever audio tracks you have edited. Then do an Overwrite by either dragging the clip to the far right of the screen to get the Overwrite pop up or by using the F10 key.
The Delete key to the right of your keyboard (sometimes under the help key) does a ripple delete. The Delete key under the number keys (sometimes a backspace key) removes a highlighted portion of video without rippling the timeline.
If you lay in a new clip with audio and don't want to affect an existing track, target a separate set .. so if you have a clip on V1 with its audio on A1/A2 and you want to overwrite the video but add new audio, target V1 and A3/A4.
As to overlapping clips .. if you want to use transitions, overwrite your first clip. Overwrite the second right up against it .. don't try to overlap. Now select your transition and drop it down between the two clips. NOTE: FCE needs handles ... like about a spare 15 frames of info on both clips
I strongly reccomend Tom Wolsky's book on FCE. It has tutorials and is a great way to start. I've never used Vegas but FCE is a very deep program ... it takes time, practise and patience (and you online manual is a great resource too)

3 questions about the evalution license ?

Hi - I have some questions about the Weblogic Server Eval license.
Before I start let me just say I'm not trying to rip BEA off, I just
want to know what's possible.
1. Firstly what happens after the 30 days does the server just not
work or only work in a restricted form ? If restricted, how so ?
2. I read that the eval edition will only access 3 unique IP
addresses. I intend to have WL running on a RedHat linux box whilst
the pages are served by IIS on a W2K box (both machines are on our
internal LAN). Am I going to be able to do this with the eval license
? I'm not quite sure what the 3 IP addresses refer to ...
3. Do I need anything super-strong in the way of a Linux box to run
this on ? I've got an old Pentium with 32Mb of RAM in it. I can't see
a "minimum spec" on the BEA site. Bear in mind it's not to do any
"real" work just to give the thing a run around the block ?
4. When the Eval license is dead what's the minimum amount a small s/w
house would pay for a licence to develop under (US (or anywhere)
prices will do I just want a ballpark).
Sorry that was 4 questions ;-). I'd appreciate any information you
have to share.
Thanks
Richard Shea.

1)The server won't start if the license expires.
2)The 3 unique IP'S refer to the number of clients that can access the
server. It means that WLS will server requests coming from 3 different
ip's at most. A request coming froma 4th client with a different ip will
be rejected.
3)I guess 32 MB's is relatively less The default scripts always use 64 MB
exclusively for the JVM . Having 32mb RAM means that a part of it will be
used by t he Operating System and other Applications. You might experience
OutOfmemory errors and slow performance
4)email [email protected] and they should be able to handle this
Yeshwant
Richard Shea wrote:
Hi - I have some questions about the Weblogic Server Eval license.
Before I start let me just say I'm not trying to rip BEA off, I just
want to know what's possible.
1. Firstly what happens after the 30 days does the server just not
work or only work in a restricted form ? If restricted, how so ?
2. I read that the eval edition will only access 3 unique IP
addresses. I intend to have WL running on a RedHat linux box whilst
the pages are served by IIS on a W2K box (both machines are on our
internal LAN). Am I going to be able to do this with the eval license
? I'm not quite sure what the 3 IP addresses refer to ...
3. Do I need anything super-strong in the way of a Linux box to run
this on ? I've got an old Pentium with 32Mb of RAM in it. I can't see
a "minimum spec" on the BEA site. Bear in mind it's not to do any
"real" work just to give the thing a run around the block ?
4. When the Eval license is dead what's the minimum amount a small s/w
house would pay for a licence to develop under (US (or anywhere)
prices will do I just want a ballpark).
Sorry that was 4 questions ;-). I'd appreciate any information you
have to share.
Thanks
Richard Shea.

Question about the "iPod radio remote"

I assume the "radio remote" is the same for every country and is under software control. I want to buy in Canada but use in UK and Canada.
Has anyone got one and seen the RDS work, in the UK almost every FM channel is RDS. Do they have RDS in Canada (Toronto) can anyone confirm?
And of course it says FM so this again I assume no AM, not that I need AM it was just an interest in if it could do it.
What happens about headphones, you can plug a pair into the remote, can you still plug into the bottom of the iPod or does the remote connector get in the way.
What is the story with "line out" I use this all the time as I amp my headphones. So I assume you cant use line out? or is the remote a line out also.
And I assume the remote cable and you headphones act as the aerial, how is the quality? Is it any good indoors, some little FM radios I have used drop to mono indoors. Does this Apple one frop to mono if the signal is weak?
Someone that has one can perhaps answer
Cheers
Ray

I can at least answer some of the questions.
The RDS function on this radio/remote is poor in the
UK. You have to set the radio function on the iPod
to "Europe" and when you do this RDS info is not
displayed on almost all radio stations such as
Virgin, XFM, Capital, GLR, etc. It does display on
Radio 2 however. At least, this is my finding. So
it's unpredictable at best. Setting the radio to
"USA" on the iPod increases the likelihood of getting
the RDS to display, but the downside is that you can
then only tune the radio in increments of 2mhz which
is a bit awkward if your looking for 89.1mhz!
There are three settings for the radio which you
choose via the iPod. They are USA/Europe/Japan. No
setting for Canada, although I'm sure you will still
be able to use it over there as I can still use mine
here in the UK even if it's set to USA.
No, there is no AM radio.
You can plug headphones into the remote or the
headphone jack on the iPod, or both at the same time.
I'm not sure I understand your question about the
bottom of the iPod. The radio plugs into the iPod
via the dock connector.
There is no 'line out' on the iPod. If you mean the
one on the dock, then no you can't use it as you
cannot place the iPod into the dock whilst the
radio/remote is connected as they use the same
connector.
Yes the cable of the remote acts as the aerial.
Reception is surprisingly good where I am, but it
will of course depend on where you use it. I've
used it indoors without any drop in signal or it
dropping to mono.
Lastly, you need to update the software for both the
nano or the 5th generation for the radio to work
(after you do this a radio function appears in the
menu), and some users have found that doing this
screws up the iPod. I have mine working on both the
nano and the 5th gen without any problems.
There is a review of the radio/remote here. I like
mine and consider it a worthwhile accessory, but of
course there will be those who disagree.
iPod
Radio/Remote Review.
Thank you for the reply.
Think your right USA or Europe will work in Canada.
Yes I mean the line out via the dock, I just wondered if the remote become a line out socket (I also use a pocket dock for line out for headphone amp as I use a pair of Sennheiser HD600 with my ipod) but of course that is silly becasue you have a volume control on the remote and line out is normaly fixed.
Based on your views I shall get one in March when in Toronto
Cheers
Ray

Questions about the content of download meeting recording .zip file

I tried posting this on the resurrected Connect forum, but my Adobe ID wasn't recognized there....
Concerning the files that are included in the .zip file of the meeting recording that can be downloaded:
1) Is there any documentation describing the files and their contents (i.e. what each file represents, what each XML element and attribute in those files represent)
2) Are there any files that capture mouse movement on a shared desktop?
Thank you!

Hi Sean,
Regarding your first post:
Thanks Jorma! I don't have access to an FMS build at the moment but I'm quite certain it's there. As for contacting Jaydeep, I am 90% sure he authorized us to broadcast his email on here if folks had questions about the tool, but, in the case that I'm wrong and he didn't - I'm going to double-check first.
Regarding your most recent post..
"To be clear, the most critical goal I'm trying to accomplish is to create an automated process that will download the recording meeting at its highest quality in a consistent and reliable manner".
I personally believe this is possible; unfortunately, I haven't seen it done yet. If your recording contains:
- audio
- a camera feed
- screensharing
Then I think you might be able to get this going. If it contains shared content, like a shared PPT, this gets trickier.
"To do this, of course, I have to reproduce some of the functionality that Connect provides, starting and combining video and audio streams according to the instructions in the control files."
Exactly right. If your recording didn't contain shared content, then all you've got on your hands are a bunch of audio/video files that you could edit together as you wanted with your favourite video editing tool. If it contains shared content, here's (at a high level) what's happening.
For shared PPTs or FTContent files:
First (for version 9 recordings only), Connect reads the information on the Shared Content's location and SCO within mainstream and indexstream and validates it before loading it. I don't recall this happening to the same extent with version 8 or earlier, but maybe it was. Now, if the content is validated (ie. Connect can find it) the share pod will display as black, if it doesn't, you get an empty pod with an message like "No content is being shared" or something like that.
Connect then looks at the actual FTContent file, and loads the content that is to be shared using the file path and sco ID listed in here. It's important to note that the SCO ID and file path in here will likely not be the same as the original file you uploaded to your room, it's a new SCO id (I believe SCOs of this type are called referenced scos) and new path.
Now...if I was going to build some sort of player which would play all these files in one screen to make a recording...I might not want to use Connect's code here. If you know the file path to the shared content (from FTContent), you could easily view it with the content URL (conveniently also in FtContent). I'm not a coder, but I'm envisioning something like Presenter's GUI where you've got the presentation's content in the main area, and a video file (if there is one) playing back on the side.
Anyways, food for thought if you want to try to go about this. Connect recordings are incredibly complex and they come with a big learning curve, but if you can make sense of them the knowledge is quite valuable.

N00b question about the ABS

Hey, I am new to Arch and I'm about to install it on my machine (used it a bit in a virtual machine) and I have a small nooby question about the ABS.
According to the wiki: https://wiki.archlinux.org/index.php/Arch_Build_System
"Running abs as root creates the ABS tree by synchronizing with the Arch Linux server."
Does this mean that the ABS tree (not the package) is always downloaded from the official Arch Linux servers, never from any of the mirrors?

jomasti wrote:
ANOKNUSA wrote:makepkg is part of the abs package.
You might be confusing that with makeworld. makepkg is included with pacman.
Anyway, gregor, you are confusing the AUR with ABS. Although, what you are saying is still possible via the source files when looking up a package on https://www.archlinux.org/packages/. But with both, using a program or using the respective page is a personal choice.
Yup, you're right. My mistake.

This is a two part question about the creative 16gb Zen?

8This is a two part question about the creative 6gb Zen? First of all, my battery life dropped very suddenly. One charge I was getting the full 30 hour battery life and the next it dropped to under ten. I tried using their tips on how to extend the battery life and I am still getting less than 0 hours of battery life. Why would it dropped more than half the amount between charges? I tried recharging it after it ran out and still the same thing. Any help?
Second, (I am adding this question because it might relate to the first in some way) my mp3 player has been behaving strangely lately. For example, some artists sometimes have letters removed or all but the first end up being removed. But, if you reset the player, the artists go back to the full name. Also, my player has been taking a little longer than usual to turn on. It takes about 30 seconds to turn on instead of the 5-0 that I'm used to. Does anyone know why this might be happening?
My Zen is only 4 months old, and I would be very upset it it's breaking already. Please, if you have any suggestions on how I can fix what's happening, post them. (Even if they?probably won't work, they're worth a try.)

< This is an unusual one; never heard of it before. All I can suggest is cleaning up and perhaps reflashing the firmware. If it still is doing this, then get the thing exchanged pronto.
My guess is that the problems are indeed closely related.

Question about the BlackBerry 8520 Unlocked

Hi all,
I've a question about the BlackBerry 8520.
I saw it's being sold as unlocked and I'm wondering if once I buy it I need to have a particular carrier plan to use it or if I can simply use my pay as you go At&t plan.
So far I didn't buy any smartphone, iPhone, Android and so on because I don't want to be forced to add a monthly plan, that by the way usually is not cheap here in LA (around $70-$90 per month). But I'd like to have a BlackBerry as I guess I could use, even without the usual carrier plans, most of its features (but please correct me if I'm wrong).
So, basically the question is: would it make sense to buy the 8520 even with my basic "pay as you go" plan?
Thanks for any info.

Haha... so, probably whatever I write in this forum it doesn't matter. That's nice, it could be the perfect place where I can just rant or write anything that comes to my mind. Cool, I'll keep you guys updated. Stay tuned, some good rant coming soon!

SUP - 2 questions about the CDB (cache database)

Hi,
I have 2 questions about the cache database and the cache groups:
1 - How does the "On demand" cache group policy exactly works? I know that online cache group is without storing any data on the CDB making direct requests to de backend from the device, the DCN is based on updating from the backend, the scheduled is based on a time period, but I don't understand how the "on demand" exactly works, and why it has a time period too.
2 - Is it possible to query the cache database table to check the data that SUP has stored? How can I do this?
Thank you!

I posted a similar question in SUP Apps project not too long ago and Paul Horan provided this useful reply:
Create a "Sybase ASA v12.x for Unwired Server" connection profile in the Enterprise Explorer. I named mine CDB.
: Host = localhost (or whatever the machine name is)
: Port = 5200
: Database name = "default"
: User Name = "dba"
: Password = "sql"
Obviously, change the userid/password to match, if you changed them during install time.
Connect, and you'll see the "default" database displayed.
Navigate down through the Tables folder, and the first subfolder is labeled something like [#should_delete_sk ...] Start there.
You'll see a bunch of tables with the naming convention "D1" + package name + package version + MBO name. These are the cache tables for the MBOs.

Question about the EXSP24 sampler (or any other samples) bundled with Logic

Similar Messages

Maybe you are looking for