Question about the on board connector Line In / Microphone In / *Digital

My computer case with the front 2 audio ports has 3 different type connectors 2 that are for the motherboard (which i really dont want to use) and the third is all the different connectors seperate there is a GROUND / RET-R / R-OUT / MIC-IN / L-OUT / RET-L / MIV-VVC
i know these fit the flat 8 pin on the sound card but i really dont know what order they go in i've looked alot of places to see if it tells me even some sort of color coding would be nice.... if any knows a short reply would be awsome.

Here is the article on the NVIDIA 8600 chip:
http://support.apple.com/kb/TS2377
Note that Apple will do the repair free of charge if the chip fails within the first two years of ownership. The repair will be to replace the logic board, as Apple does not work on boards at the component level. Your machine should be new enough to qualify for the free repair.
Good luck!

Similar Messages

Questions about the ipod camera connector...

Hi,
i got some questions about the ipod camera connector.
1)Is the camera connector compatible with the Sony camera DSC-P93A ?
In fact, this camera got PTP protocol.
PTP (Picture Transfer Protocol) Oui
Marque PIM (Print Image Matching) Oui
PictBridge™ Oui
So, do the camera need to have the three following protocols to be compatible with the camera connector ?
=>Mass Storage, PTP, and Type 4
Or maybe does it need only one of it??
2) Is it compatible with a USB memory card reader?
Thank you

Wel, if i've right understood what you said, my camera is compatible because it got PTP protocol ?
That's weird, cause i wrote a mail to sony to ask them about the compatibility of my camera, but they answered that it wasn't. But of course, i'll prefer to believe you than them !

Question about the logic board and video

Hi, i own a macbook pro 17 in. @ 2.4 ghz, and have the nvida 8600 gt card. I'm pretty sure that the card has failed since no video has shown up during start up 2 weeks ago (i asked a friend of mine, and he had the same problem with a macbook pro 15 in., he was pretty positive on a card failure). I brought it to the local genius bar, and they fixed some firmware or whatnot, and it worked fine for a week. A week later, the same problem of no video showed up during start up.
My question is if this is a video card issue, is it possible that the logic board could have been damaged from the faulty video card? The tech. told me that it might be the board, and im afraid of paying the hefty repair fee, although i personally feel that the card is all to blame.

Here is the article on the NVIDIA 8600 chip:
http://support.apple.com/kb/TS2377
Note that Apple will do the repair free of charge if the chip fails within the first two years of ownership. The repair will be to replace the logic board, as Apple does not work on boards at the component level. Your machine should be new enough to qualify for the free repair.
Good luck!

Question about the Discussions Board

How come the icon "post new topic" appears for certain programs (FCP ect) but when I want to post a question under "I-Web" I do not get this option?
I know this has NOTHING to do with FCP.... Sorry!
Thanks!
G

EXACTLY!!
Be careful of different forums. They tend to do this. Make sure there isn't a 'list' of the forums on the top of all the threads. Usually those type of threads are a combination of posts added to the individual threads within.
For example: http://discussions.apple.com/category.jspa?categoryID=123
If'n you had clicked on FINAL CUT STUDIO instead of FINAL CUT PRO you would have gotten that.
Good luck!!
CaptM

Question about the "iPod radio remote"

I assume the "radio remote" is the same for every country and is under software control. I want to buy in Canada but use in UK and Canada.
Has anyone got one and seen the RDS work, in the UK almost every FM channel is RDS. Do they have RDS in Canada (Toronto) can anyone confirm?
And of course it says FM so this again I assume no AM, not that I need AM it was just an interest in if it could do it.
What happens about headphones, you can plug a pair into the remote, can you still plug into the bottom of the iPod or does the remote connector get in the way.
What is the story with "line out" I use this all the time as I amp my headphones. So I assume you cant use line out? or is the remote a line out also.
And I assume the remote cable and you headphones act as the aerial, how is the quality? Is it any good indoors, some little FM radios I have used drop to mono indoors. Does this Apple one frop to mono if the signal is weak?
Someone that has one can perhaps answer
Cheers
Ray

I can at least answer some of the questions.
The RDS function on this radio/remote is poor in the
UK. You have to set the radio function on the iPod
to "Europe" and when you do this RDS info is not
displayed on almost all radio stations such as
Virgin, XFM, Capital, GLR, etc. It does display on
Radio 2 however. At least, this is my finding. So
it's unpredictable at best. Setting the radio to
"USA" on the iPod increases the likelihood of getting
the RDS to display, but the downside is that you can
then only tune the radio in increments of 2mhz which
is a bit awkward if your looking for 89.1mhz!
There are three settings for the radio which you
choose via the iPod. They are USA/Europe/Japan. No
setting for Canada, although I'm sure you will still
be able to use it over there as I can still use mine
here in the UK even if it's set to USA.
No, there is no AM radio.
You can plug headphones into the remote or the
headphone jack on the iPod, or both at the same time.
I'm not sure I understand your question about the
bottom of the iPod. The radio plugs into the iPod
via the dock connector.
There is no 'line out' on the iPod. If you mean the
one on the dock, then no you can't use it as you
cannot place the iPod into the dock whilst the
radio/remote is connected as they use the same
connector.
Yes the cable of the remote acts as the aerial.
Reception is surprisingly good where I am, but it
will of course depend on where you use it. I've
used it indoors without any drop in signal or it
dropping to mono.
Lastly, you need to update the software for both the
nano or the 5th generation for the radio to work
(after you do this a radio function appears in the
menu), and some users have found that doing this
screws up the iPod. I have mine working on both the
nano and the 5th gen without any problems.
There is a review of the radio/remote here. I like
mine and consider it a worthwhile accessory, but of
course there will be those who disagree.
iPod
Radio/Remote Review.
Thank you for the reply.
Think your right USA or Europe will work in Canada.
Yes I mean the line out via the dock, I just wondered if the remote become a line out socket (I also use a pocket dock for line out for headphone amp as I use a pair of Sennheiser HD600 with my ipod) but of course that is silly becasue you have a volume control on the remote and line out is normaly fixed.
Based on your views I shall get one in March when in Toronto
Cheers
Ray

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

A question about the SPOOL command in sqlplus

Dear all,
I have a question about the SPOOL Command and I would appreciate if you could kindly give me a hand. Consider the following sql script.
SPOOL result.txt
SELECT * FROM mytable;
SPOOL OFF;This works pretty well, and the whole content of the table "mytable" is exported to the text file "result.txt". However, sqlplus prints also the number of lines
printed after each query. As a result, after running this script, at the end of the file, I have always a line like
"20541 lines returned"How can I avoid this line (the number of returned lines) in my result file?
Thanks in advance,
Dariyoosh

Peter Gjelstrup wrote:
Hi Dariyoosh,
As you are about to find out, SQL*Plus is a really powerful tool once the wonders of it are discovered.
You really should study the reference
http://download.oracle.com/docs/cd/E11882_01/server.112/e10823/toc.htm
In your current case especially the SET command
http://download.oracle.com/docs/cd/E11882_01/server.112/e10823/ch_twelve040.htm#BACGAJIC
Regards
PeterHello there,
Thank you very much for your attention to my problem and in particular the interesting links.
Kind Regards,
Dariyoosh

Question about the MAKZN field in the RBKP table

Hello all.
I have a question about the MAKZN field. Does anyone know what field in MIRO is assigned to this field? We have an issue where a line item amount was not selected invoice was out of balance but the agent selected accept and post. And invoice posted. but I am interested in knowing where the amount if keyed in because when I go to the RBKP table I see an amount entered in the MAKZN (manually accept net difference amount)

Hi,
it seems as if the value was calculated internally:
program SAPLMR1M
dynpro 6000
PAI module fcode_6000
Include LMR1MI3W
*-------- buchen ------------------------------------------------------*
    WHEN fcobu OR fcomanak.
*--- identical code in PAI Module FCODE_6250 --------------------------*
      PERFORM ota_check USING vf_kred-xcpdk rbkpv-xcpdd
                        CHANGING rc.
      IF rc NE 0.
        CLEAR ok-code.
        EXIT.
      ENDIF.
      IF ok-code = fcomanak.
        PERFORM diff_akzeptieren.
        ok-code = fcobu.
      ENDIF.
where:
fcomanak          LIKE ok-code VALUE 'MANAK', " Manuell akzeptiert
*&      Form DIFF_AKZEPTIEREN
*       Differenz manuell akzeptieren
FORM diff_akzeptieren.
*       Manuell akzeptierter Betrag
    rbkpv-makzn = rbkpv-makzn + rbkpv-diffn.
    rbkpv-makzmw = rbkpv-makzmw + rbkpv-diffmw.
*       Differenzbeträge
    CLEAR: rbkpv-diffn, rbkpv-diffmw.
ENDFORM.                             " DIFF_AKZEPTIEREN
maybe it´s happenning when releasing manually the invoice in MRBR?
Best regards.

I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty?

I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty? I want to know if the 3 year extended warranty covers what damage. Like water damage, accidental damage, lost or stolen macbook, manufactory defects, or any other kind of damage, maybe be even cosmetic damage. Can anyone help me?

If you are talking about features of the MBP itself, as long as you are not looking at the Retina models, then the memory you can upgrade yourself for a lot less than Apple charges, and that does not affect the warranty as Apple considers memory a user permitted upgrade. Great sources are Crucial and OWC, both are Mac specialists and have on-line videos on how to do the install.
If the 15" is what you are looking at, a good upgrade is the 7200 rpm hard drive, gives a little better performance over the standard 5400 rpm drive.
The Hi Res screen is good if you do a lot of graphics work.
Comparing the 13" amd 15" you will notice the 15" has a second, discrete graphic processor...helps when you get into heavy duty videos, games, graphics...but keep in mind that kicking in the second processor uses a lot of power and will run the battery down faster.
If you are looking at the Retina models, then keep in mind there are no post-purchase upgrade options...you have to buy with everything you want at the start.
Just some thoughts.

Questions about the IDE

Hi all,
I have some questions about the IDE's Help menu.
First, without peaking....
1. Why would you click the Help menu?
2. What would you expect to find there?
Now, you can peak
3. Is there anything in the Help menu that surprises you (gee, I never would have thought to look there for that)?
4. What is missing?

That's a reasonable dividing line. I don't know the official reason myself,
but I'm glad there are now two forums because I will not lurk on the Flash
Builder forum because I don't write any of the code for Flash Builder and
therefore have no "expertise" there.
I do write code that goes in the Flex SDK and generally know who to bug
about other code in the SDK I haven't written so if one of my colleagues is
really busy and not paying attention to forum postings I can point them to
unanswered posts in their domain of knowledge.
I would offer that the dividing line is really whether you are having
trouble with the tools, including the code generated by the tools, or
whether you are having trouble understanding with the components and
infrastructure in the SDK.
One cross-over point would probably be profiling. Even though I didn't
write the profiler for Flash Builder, I have lots of experience using it so
if you are debugging memory leak or performance issues I would ask those
questions on this forums. If you are having trouble getting the profiler or
debugger to run, though, ask that on the Flash Builder forum.

A few questions about the ka790gx and dka790gx

i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section. There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
"""Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
It's better than nothing, but only just."""

MOVED: A question about the K8N Diamond mainboard

This topic has been moved to AMD64 nVidia Based board.
A question about the K8N Diamond mainboard

You can try it. Worst that could happen is a non-boot.

Questions about the Apple Developer Enterprise Program

Hi there,
i got some questions about the Apple Developer Enterprise Program:
- is there a way a company can create their own "AppStore" with only the APPs the employees should use?
- when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
Thanks in advance for answers!

Google: MDM

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Question about the on board connector Line In / Microphone In / *Digital

Similar Messages

Maybe you are looking for