Question about the order to creating Account, Contact, Contact Role

Hi, my friends,
I have some questions about the order of creating Account, Contact, Contact Role, etc in Web Service 1.0. I could create them in the following case:
1. Insert Contact object and get contactId (now new contact exists in CRMOD)
2. Insert Account object with Contact Role child associated with contactId
My questions are:
1. Do we have the following order? Insert new Account with new Contact child and Contact Role child (Contact is new and does not exist in CRMOD).
2. Looks like system need accountId, contactId, etc to make the objects relationship. Is there other field having the same function?
Thanks
Ray

Hi Ray,
In response to your questions:
1. Do we have the following order? Insert new Account with new Contact child and Contact Role child (Contact is new and does not exist in CRMOD).No. Both the Account and Contact must already exist. The Role value is an attribute on the Account Contact relationship, this relationship must exist in order to assign a role value to it. This is consistent with the behaviour of the UI, when you press the New button on the Contact child applet, you are taken to the Contact New page where you can create a Contact record. Once you save, the relationship is created but you cannot assign a role value unless you click the Edit Roles link next to the new Contact.
2. Looks like system need accountId, contactId, etc to make the objects relationship. Is there other field having the same function?Correct, the system needs to know which Account/Contact pair is being assigned a role value. To do this the Account and Contact values must be uniquely identified using the Id values for each.
I hope this helps.
Thanks,
Sean
Edited by: Sean Duffy on Jan 25, 2010 10:11 AM

Similar Messages

LinkedHashMap - Question about the ordering

Hi all,
I have the following objects in my code:
LinkedHashMap<Integer, String[]> mainContainer = new LinkedHashMap<Integer, String[]>();
String[] stringContainer = new String[37];
int key; // this value increments up to 37
mainContainer.put(key, stringContainer);Now when I add objects (in incrementing order from 0 to 37) to the main container when looking at the list I expected to see 37 items with the key being inserted into the list in order. What I found when inspecting the variables in my IDE was that when I got to element 16 the key was set to 17 and looking at the 17th item I realised that key was 16...Later on in this list there were other inconsistencies where the order was not as expected e.g. element 30 had a key of 20,
Please could someone suggest what might be going on here - I may have misunderstood the ordering of this type of object?
Thanks,
Edited by: notforgoogle on Nov 22, 2008 10:24 AM

One thing to remember is that you should not reuse an array for the values of multiple keys like the the previous example.
Map<Integer, String[]> mainContainer = new LinkedHashMap<Integer, String[]>();
for (int key = 0; key < 37; key++)
mainContainer.put(key, new String[37]);
System.out.println(mainContainer.keySet());prints
[0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36]

A question about the execution order of java code

I have a question about the order of the execution of java code.
class myclass
String str1 = new String("str1");
static String str2 = new String("str2");
static
String str3 = new String("str3");
myclass( )
String str4 = new String("str4");
static myfuntion()
String str5 = new String("str5");
When I new a myclass object, what is the order of execution about str1,str2.str3 ,str4?
When I run myclass::myfunction( ) instead of new a myclass object what is the execution order about str1, str2, str3, str4, str5?
Thanks

hello,
I think there may be one thing can't use println to make sure.
class myclass
static { System.out.println("str1"); };
myclass() { System.out.println("str2"); }
then str1 appear before str2
class myclass
static { String str1 = new String("str1"); };
myclass() { String str2 = new String("str2"); }
then
str1 initilized before str2,
str1 get the value str1----->after<----- str2.
Am I right or wrong?

Dear Customer Service Team, I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I

Dear Customer Service Team,
I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I can not find it and now I only have access to the trial version.
Thank you for your help in advance.
Kind Regards,
G. Zsolt

There is no serial number require for Creative Cloud products, you may activate the products using your email address and password which is associated with Adobe. If your Dreamweaver asking for serial number, then make sure you are signing in with correct email address.
You may also refer below link
Sign in, activation, or connection errors | CS5.5 and later

For...each...in loop. Can I make assumptions about the order?

I've always assumed that I can't make any assumptions about the order in which elements are indexed by a for...each...in loop. Not even for a conventional indexed array. (Emphasis!: I'm not talking about associative arrays here, I'm talking about normal indexed arrays. Dense, no gaps.).
for each (var element:ElementClass in myArray) {}
May not traverse the array from first to last. I've never assumed that it's guaranteed anyway. Neither does the ECMA standard. I assume the compiler/runtime is at liberty to index the array in any order, which may even be different each time.
Whereas... for (var i:int=0;i<myArray.length;i++) {......var element:ElementClass=myArray[i]....}
....Is guaranteed to traverse the array from first to last. So I always use this looping statement if the ordering is important.
MY QUESTION IS.... In ActionScript 3, Can I just assume that the for..each..in will always traverse a dense indexed array from first to last?
Actually, my specific case at the moment is where another programmer is passing me an array,assembled within a for...each..in loop.   But I need to assume the order of that array. If this is always going to work in ActionScript3, then no problem. Although I'll continue to worry about the ECMA standard for my own code, and wont make assumptions about ordering - but I won't force my anal-retentive programming style on the other guy.

I did a test on it
case1:
var arr:Array = new Array();
arr[0] = 'a';
arr[1] = 'b';
arr[2] = 'c';
arr[3] = 'd';
for each(var arrEle:string in arr)
     trace(arrEle);
always output a,b,c,d
case2:
var arr:Array = new Array();
arr[6] = 'd';
arr[0] = 'a';
arr[1] = 'b';
arr[3] = 'c';
for each(var arrEle:string in arr)
     trace(arrEle);
always output a,b,d,c
so I assume array is created in this way: alloc a memory block for array first, when attaching new element(numeric indexd by i) to array, check if i >= length, put new element in the end of array, else put element at i; so in case 2, array is alloced in this way
array:{'d'} //6>0
array:{'a', 'd'} //0<1
array:{'a', 'b', 'd'} //1<2
array:{'a', 'b', 'd', 'c'} //3>=3
disclaimer: totally assumption!!!

Questions about the content of download meeting recording .zip file

I tried posting this on the resurrected Connect forum, but my Adobe ID wasn't recognized there....
Concerning the files that are included in the .zip file of the meeting recording that can be downloaded:
1) Is there any documentation describing the files and their contents (i.e. what each file represents, what each XML element and attribute in those files represent)
2) Are there any files that capture mouse movement on a shared desktop?
Thank you!

Hi Sean,
Regarding your first post:
Thanks Jorma! I don't have access to an FMS build at the moment but I'm quite certain it's there. As for contacting Jaydeep, I am 90% sure he authorized us to broadcast his email on here if folks had questions about the tool, but, in the case that I'm wrong and he didn't - I'm going to double-check first.
Regarding your most recent post..
"To be clear, the most critical goal I'm trying to accomplish is to create an automated process that will download the recording meeting at its highest quality in a consistent and reliable manner".
I personally believe this is possible; unfortunately, I haven't seen it done yet. If your recording contains:
- audio
- a camera feed
- screensharing
Then I think you might be able to get this going. If it contains shared content, like a shared PPT, this gets trickier.
"To do this, of course, I have to reproduce some of the functionality that Connect provides, starting and combining video and audio streams according to the instructions in the control files."
Exactly right. If your recording didn't contain shared content, then all you've got on your hands are a bunch of audio/video files that you could edit together as you wanted with your favourite video editing tool. If it contains shared content, here's (at a high level) what's happening.
For shared PPTs or FTContent files:
First (for version 9 recordings only), Connect reads the information on the Shared Content's location and SCO within mainstream and indexstream and validates it before loading it. I don't recall this happening to the same extent with version 8 or earlier, but maybe it was. Now, if the content is validated (ie. Connect can find it) the share pod will display as black, if it doesn't, you get an empty pod with an message like "No content is being shared" or something like that.
Connect then looks at the actual FTContent file, and loads the content that is to be shared using the file path and sco ID listed in here. It's important to note that the SCO ID and file path in here will likely not be the same as the original file you uploaded to your room, it's a new SCO id (I believe SCOs of this type are called referenced scos) and new path.
Now...if I was going to build some sort of player which would play all these files in one screen to make a recording...I might not want to use Connect's code here. If you know the file path to the shared content (from FTContent), you could easily view it with the content URL (conveniently also in FtContent). I'm not a coder, but I'm envisioning something like Presenter's GUI where you've got the presentation's content in the main area, and a video file (if there is one) playing back on the side.
Anyways, food for thought if you want to try to go about this. Connect recordings are incredibly complex and they come with a big learning curve, but if you can make sense of them the knowledge is quite valuable.

Question about the function module (RFC_READ_TABLE)

Dear everyone
Could I ask you a question about the function module (RFC_READ_TABLE)?
I was asked if it's possible to create a report which compares the data between different SAP systems (both production systems).
Now, the easiest way would be to use the function module (RFC_READ_TABLE) within a SAP infoset query (SQ01 type query).
But I heard the rumor that using the function module (RFC_READ_TABLE) is not advisable due to the security reason.
However, I am not exactly sure what sort of security problems this function module can possibly have...
Would you help me on this?
I also would like to know if using "remote enabled module" type function module can always overcome this possible security issue.
Or, are there any points that I need to be careful about even when I use "remote enabled module" function module?
Thank you very much in advance.
Takashi

Dear Fred-san
Thank you very much for your support on this.
But, may I double check about what you mentioned above?
So, what you were mentioning was that if some user executes the query with
the function module (RFC_READ_TABLE), under the following conditions, he can access to
the HR data even when he does not have the authorizations for HR transactions?
<Conditions>
1. the user has the authorization for HR database tables themselves
2. RFC_READ_TABLE is called to retrieve the data from HR database
<example>
Data: LF_HR_TABLE like DD02L-TABNAME value 'PA0000'.
CALL FUNCTION 'RFC_READ_TABLE'
   EXPORTING
    query_table                = LF_HR_TABLE
TABLES
   OPTIONS                    =
   fields                     =
   data                       =    .
But then, as long as we call this function module for a non-critical tables such as
VBAP (sales order) or EKKO (purchase order) within our query, it wouldn't seem to be
so security risk to use RFC_READ_TABLE...
Besides, each query (infoset query) has got the concept of user groups, which limits
the access to the queries within the user group.
※If someone does not belong to the user group, he cannot execute the queries within that
   user group, etc
So, my feeling is that even infoset queries does have authorization concept...
Would you give me your thought on this?
I also thank you for your information for SCU0.
That is an interesting transaction
Kind regards,
Takashi

A question about the option Reset All Settings

Hello, I have a question about the reset all settings function in the IPad. I need to keep all of the installed applications on the device yet I need to remove any log in information and contacts. Is this the correct option or would the Erase All Content and Settings be what I want?

If you read the OP's request, they "need to keep all of the installed applications on the device". Selecting "Erase All Content and Settings" will do just that, erase everything.
Faroff, you can remove accounts in Settings/ Mail, Contacts, Calendar ... that would remove contacts only if the contacts were synced to such an account. If contacts were synced from iTunes, you'd have to un-sync them from iTunes by changing the sync settings. If the contacts were just manually entered and not synced with anything, you have to delete them one by one. However, iOS will remember past usage of a contact, so even if you remove them they may be recalled by you initiating an email or iMessage to something close to what used to be in the Contacts app. The only way to clear that I think is to do a full erase of the iPad.
As for log-in information, go to Settings/ Safari/ Passwords & Autofill, where you can erase passwords and saved credit card info. You can also clear cookies and data in this menu.
You might be better off doing a full erase of the iPad. Why do you not want to remove the apps? You can re-sync them from iTunes or re-download them if necessary. Or did you inherit this device from someone else and you're wanting to keep their apps installed but remove their private information?

4 questions about the the top boxes - SD box and Home media DVR

Hello. I am going to be getting Fios soon and I have some questions about the boxes. I will be getting the Home Media DVR and 4 SD boxes.
1) Do these boxes have timers on them to set so the box can turn off at a certain time?
2) Do these boxes have parental control and if so is it good enough to block things that I do not want my child to see?
3) How many people can access the home media dvr at the same time to watch already recorded programs
4) If the Home Media DVR is in the family room can a record be started from the bedroom over the SD set top box (even an hd show)?
Thanks for any help.

I have been using two Standard Set Top Boxes for about a year. I have Parental Controls on and all channels locked. When I want to watch a channel, I tune to that channel, note the LOCKED message, which tells me to press the OK button to enter ther Parental Controls PIN and unlock the channel for viewing.
This has worked flawlessliy for the last year -- ON THE Standard STB's.
I just ordered the Home Media DVR STB to replace one of my Standardt STB..
On the Home Media DVR:
I can set the Parentals Control PIN and lock the channels, in the exact same way I did o nthe Standard STB's. However, when tuen to ANY channel, I still ge the LOCKED message and instructions to press OK to unlock the channel -- BUT no matter how I press the OK button, the Enter your Parental Conlrols PIN dialog box willl NOT open. Nothing happens -- you CAN NOT view any channel.
Again, it is the EXACT setup as for the Standard STB, but the OK button will NOT unlock any of the channels.
If you unlock all channels and LOCK the Ratings, the same problem recurs: OK buitton will never open the "enter your PIN" dialog box.
I have received two replacement boxes and have spent hours on the phone with some very capable and helpful Techs -- no luck.
Has anyone else had the same problem? Here's how to test your Home Media DVR:
1. Menu-Settings-Parental Controls.
2. You will be prompted to CREATE youre Parental Controls PIN
3. Enter you PIN twice.
4. Use the > button to scroll to Enable On/Off and set it on.
5. scroll down to Control Channels
6. Press > button to See Locked Channels
7. Scroll down to Add/Remove Channels
8. Scroll right to choose LOCK ALL
9. Press OK and then scroll to YES to lock all channels
10. Press EXIT to get out of settings.
11. All channels are now locked.
12. Go to any channel
13. A black screen will appear with a lock silhouette with the word LOCKED below, followed by instructions to Press OK to enter PIN and unlock this channel. (plus how to change locks...).
14.Press the OK button and, if it is working, you will see a dialog box at the bottom of the screen that is titled: UNLOCK, with the channel listed and the instructions to "Enter your PIN using your numeric pad on remote to naje this channel availabe for all users." THere's a PIN box, which shows asterisks for each number entered, with "Press Exit to Cancel" below.
15. On the Standard STB, it works exactly as described in steps 1 thru 14. On the Media Center DVR, it works up to step `13, but in 14, no matter how you press the OK button, the UNLOCK dialog box never pops us. The Remote STB light flashes on the remove and the REMOTE yellow light flashes on the DVR, but nothng happens.
If you have a Home Media DVR, can you please try this and see if it works?
Thanks,
John

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Questions about the Apple Developer Enterprise Program

Hi there,
i got some questions about the Apple Developer Enterprise Program:
- is there a way a company can create their own "AppStore" with only the APPs the employees should use?
- when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
Thanks in advance for answers!

Google: MDM

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Question about the ability of Genius Bar to help with outside software...

Hi I wasn't sure where to put this, but here's my question. I'm having a problem with the Sims 2 on my Macbook and I was wondering if I go to the Genius Bar will they be able to help me or are they strictly hands off when it's not a direct Apple product?
Also, I bought an external hard drive in the Apple Store but it's not an Apple branded product. If I'm having a problem with that, can I go to the Apple Store?

If it's a question about the installation, system requirements or compatibility with your MacBook, the Mac Genius can probably help. If you're having some kind of issue while using the Sims 2, you'll probably have to contact .
The same is true with the hard drive. If you need some help getting it connected or even formatted, they can probably help. However, if it's not powering up or you're losing files or some kind of operational issue with the hard drive after it's connected, they'll probably refer you to the manufacturer.
Usually Apple can't support other vendors' products. Someone here may be able to give you some more advice, since none of us work for Apple. There may be someone here who's already had the same issue with the Sims.
-Doug

Question about the programming of a legend

Hello everybody,
I have a question about the programming of a waveform's legend. I
already asked here in this forum about the legend programming (03)
months ago.
I went satisfied but I ve just noticed that this code
(See Code old_legend_test.llb with main.vi as main function) operates a
little different from my expectances.
Therefore I have a new question and I want to know if it
is possible by labview programming to plot and show, on a waveform
chart, a signal with activ plot superior to zero (0) without to be
obliged to plot and show a signal with activ plot equal to zero (0) or
inferior to the desired activ plot.
I give you an example
of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
and each signal corresponds respectively to a channel (Chan1, Chan2,
Chan3, Chan4). I want to control the legend (activ plot, plot name and
plot color) programmatically. Is it possible with labview to plot signal
1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
without to active the signal with the corresponding activ plot zero
(0)?
Let see the labview attached data
(new_legend_test.llb with main.vi as main function). When I try to
control the input selected values again I get them back but I don't
understand why they have no effect on the legend of my waveform chart.
Could somebody explain me what I m doing wrong or show me how to get a
correct legend with desired plots? Thank by advance for your assistance.
N.B.
The
both attached data are saved with labview 2009.
Sincerly,PrinceJack
Attachments:
old_legend_test.llb ‏65 KB
new_legend_test.llb ‏65 KB

Hi
princejack,
Thanks for
posting on National Instruments forum.
The behavior
you have is completely normal. You can control the number of row displayed in
the legend and this rows are linked to the data you send to your graph. Thus,
if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
which data you want to display in your graph using the property node (Active
plot and visible). But for the legend as you send 3 plots there is an array of
the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
this array but you cannot control the order in this array! So, to be able to
change this array you have to only send data you need to you graph. I'm not
sure my explanations are clear so I have implemented a simple example doing
that.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/
Attachments:
GraphLegend.vi ‏85 KB

I want to question about the official service at the service center of Sony.

I want to question about the official service at the service center of Sony.
long since I like the models and items sony. from start playstation, cameras, camcorders up, I've ever had. and a new camera that I bought two years ie compact cameras Sony Cybershot DSC H200. as of a month ago, a camera was having problems in lenses that would not close. and setting the automatic mode to move by itself. I came to the Sony Service Center in Makassar, precisely on Jl. Shop Pengayomann A5 / 05 (0411) 442340.
operator initially said only two weeks to work on my camera. but this week has been more dau even want to go in a month tomorrow, dated July 9, no news from the service center. and I kept the call to the office service. as well as assorted reasons. there are no spare parts or technical constraints, and the last one I call to his office, he said the factory spare part is damaged. imported directly from Singapore. I think, ko new spare part it can be damaged before using that? how the quality of this Sony spare part? ugly? not good? why?
I was disappointed with this situation, where soon it will Eid, want to return home as well to Java. but the camera has not been settled workmanship?
nah, roughly what is the solution of the Sony plagued with this problem? please help, because he did not know to whom to complain. operator had just said: it's up to the father alone.
once again I asked for his help. solution. if you can before Eid arrived.
Thank you,
AD. Rusmianto

Hi awwee107,
Welcome to the Sony Community!
We have forwarded your query to the relevant team for their further assistance and someone from local CC will contact you.
Thanks!

Question about the order to creating Account, Contact, Contact Role

Similar Messages

Maybe you are looking for