Question about the rescheduling of a Sales Order and its Production Order

Hello Everybody,
I experience something strange with the rescheduling of a Sales Order and its corresponding Production Order.
It will be easier to explain with an example...
For a material, I have created a Sales Order.
And from this Sales Order, I have now a Production Order converted from a Planned Order generated by the MRP Run.
This is what I have in transaction MD04:
SALES ORDER
AV DATE: 20/02/2008
GR DATE: 20/02/2008
PRODUCTION ORDER
AV DATE: 20/02/2008
GR DATE: 18/02/2008 (GR process time is 2 days).
==> OK !
Now, I have to reschedule the Sales Order one week sooner.
SALES ORDER
AV DATE: 13/02/2008
GR DATE: 13/02/2008
After transaction COHV to reschedule the Production Order, I have:
PRODUCTION ORDER
AV DATE: 15/02/2008
GR DATE: 13/02/2008
But I expected to have:
PRODUCTION ORDER
AV DATE: 13/02/2008
GR DATE: 11/02/2008
Do you have an idea about what is wrong?
Thanks in advance for your help on this subject.
Regards,
Rudy

Hello.
Thank you for your reply.
But in fact, I am doing some tests on a test platform, which is using an "old" copy of production database.
So, there can't be data already scheduled for the dates I am using.
Moreover, I just tried now to do the same with dates in November 2008, exactly with the same results.
In production platform, they experience this problem too.
Summary of my new test:
Before rescheduling:
SALES ORDER:
AV. DATE = 20/11/2008
GR. DATE = 20/11/2008
PROD. ORDER:
AV. DATE = 20/11/2008
GR. DATE = 18/11/2008
After rescheduling of one week sooner:
SALES ORDER:
AV. DATE = 13/11/2008
GR. DATE = 13/11/2008
PROD. ORDER:
AV. DATE = 15/11/2008 (ipo 13/11/2008)
GR. DATE = 13/11/2008 (ipo 11/11/2008)
I really don't understand why I don't have the same kind of dates as the ones I get before the rescheduling...
In my mind, I expect to have all these dates set back of one week...
Regards
Rudy
Rudy

Similar Messages

Production order and its Purchase order after MRP

Dear Expert,
I am wondering does SAP B1 2007 provides functionality about a production order and its purchase orders generated after a MRP will be marked so that I can check the corresponding purchase orders of a production order ?
Thanks,
Deckard

Hi Suraj V ,
Thanks for the reply, I have more questions about,
(1) is it possible to trace those purchase orders from the production order?
(2) is it possible to reserve those purchase orders of a production order because I found that the system allow another production orders to take the inventory by the receipt of the purchase orders marked by the other production orders?
Thanks a lot
Deckard

4 questions about the Creative Suite Design Standard Student and Teacher Edition

1) Can I also buy the 5.5 version from adobe or is only the 6 version available? Because online I could not get the former version into the shopping basket.
2) If I buy the version 6, i can only download the suite and get no CDs. What will happen, if my computer will be broken - can I install the suite again at another pc?
3) Can I use the student version also in a commercial way - so that the products, I create with it, can use commercial?
4) Can I use that also if I am not a student in several months?
Thanks for answers.

1) Can I also buy the 5.5 version from adobe or is only the 6 version available? Because online I could not get the former version into the shopping basket.
only cs6, cc and cc 2014 are available via adobe.
2) If I buy the version 6, i can only download the suite and get no CDs. What will happen, if my computer will be broken - can I install the suite again at another pc?
you can download and save the installation files (and your serial number) so you can reinstall. (though adobe currently allows even users of very old software to continue to download installation files.)
3) Can I use the student version also in a commercial way - so that the products, I create with it, can use commercial?
yes
4) Can I use that also if I am not a student in several months?
yes
academic software discounts faq, academic discount software faq | Adobe

Question about the new 27" LED Cinema Display and text size

Hi, I own the 24" Apple LED Cinema Display and text on the monitor is just large enough for me. Won't text on the new 27" Display be much smaller with its higher resolution?

MANY thanks for the tip.
Now then - all indications are that my Mini will NOT pass audio via the MDP Cable given the age as well as the lack of an HDMI port (I know there isn't one this rig). Unless I am missing something I don't believe there is any adapter out there that will allow the audio to now pass through the MDP Cable if the rig itself was never configured to do so.
Following links in your posting, someone recommended this:
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=6331&seq=1&format=2#description
However it seems to be set up to deliver A/V to an HDMI display, and unless I am mistaken, the 27" LED ACD does not have an HDMI in. Although my MacMini does have a S/PDIF Optical Digital Audio Output I don't believe the 27" LED ACD has any kind of separate audio input (either TOS Link or even 1/8 smini stereo).
So I reckon I am SOL with regard to getting the audio onto the new monitor from the Mini and I would need to keep my present speakers set up using the 18/" mini stereo out - but the video should still work......yes?

Questions about the difference between RFC calls with and without JavaProxy

Hello,
I have a two questions:
1. Why is it more user-friendly to access SAP data in conjunction to plain JCo calls as explained here http://help.sap.com/saphelp_nw04/helpdata/en/79/c6213e225f9a0be10000000a114084/content.htm? Waht's exactly the reason for?
2. What's exactly the runtime shown in the picture here http://help.sap.com/saphelp_nw2004s/helpdata/en/ed/897483ea5011d6b2e800508b6b8a93/frameset.htm?
Regards,
Armin

Moin Armin,
from what I understand from the first link, SAP is probably trying to say that it is user friendly because not everyone needs to be concerned regarding the actual JCo calls to the SAP backend. Rather they can simply work with the generated proxies as if they were actually working with the SAP Tables. The mapping, JCo calls and data transfer is taken care of by the Enterprise Connector.
For instance, you can generate proxies of the BAPIs on your side and let 10 users work with the structures and tables and when it is deployed, the JCo calls are automatically taken care of (from the SLD).
The figure in the second link just shows the runtime to illustrate that the native calls are hidden (again probably the same point I made before).
I am not sure, just my interpretation
Bye,
Sameer

Question about the difference between Creative Cloud Single and Complete packages / Photoshop

I am an Adobe Photoshop / CS / CC novice so I apologise in advance for however silly this may come across. If I purchase Photoshop through the 'single application' package will I get to use Creative Suite to its full potential (masking, layers, sharpening etc) or will I need to purchase the 'complete individual' package which is considerably more expensive?
I have no requirement for Adobe's products beyond photo editing and i am not familiar with the other applications / products listed.
Thanks

If you subscribe to just Photoshop CC, you get the full application (aka, masking, layers, sharpening) as well as the 20gb online storage. You will not get any of the other applications like Lightroom or Illustrator though. You only get Photoshop.

Sales Order Conversion to Production Order

Dear All,
I am from SD and have a doubt reg SD - PP ...
If i have 3 sales orders and each sales order has 3 line items. Now i need to make a production order --- the production order to have 1 line item from each sales order so in all 3 production orders for the 3 sales orders and each production order has 3 line items and each line item is from diffrent sales orders i.e as above 3 sales orders.
is it possible and how ?
I am awaiting for a suitable solution ASAP...
Thnks
krishna

Hi,
In PP always 1 production order is for only 1 product ( if no co-product is added in BOM).
In your scenario, If the PP settings & master data are maintained perfectly.
System will create 9 production orders ( this may vary with respect to the lotsizing procedure used).
Reward points if useful
Thanks & regards
Mahesh babu
Edited by: Mahesh Babu MG on Jan 30, 2008 7:19 PM

Difference between Configurable and varinant production order

Hi All,
1) What is difference between configurable material production order and variant production order?
2) What is difference between configurable material and variant material?

Hi All,
1) What is difference between configurable material production order and variant production order?
Ans:
the only difference i can see is the Account assighnment - the configurable material needs to have a sales order order or Customer independent requirment since the stock when gets produced has to be placed inanyone of the account assignment.Which in simple terms is a make to order producton order
the Variant material production order can be a make to stock scenario also
2) What is difference between configurable material and variant material?
a.Configurable material - Inthis the characteristics can get any or specified values based on the requirement
Ex: car - is configurable material
colour is a charctertisc - red,white are the values
b. Variant material - It will have ONLY one config material attached with it and the charatterstics would ahve the vallues prefixed
ex: CAR_RED as a material - which means the colur of thecar is red -it is fixed
does it clears your doubt are still require any more information..
sap s very intresting part is VC

Question about the order to creating Account, Contact, Contact Role

Hi, my friends,
I have some questions about the order of creating Account, Contact, Contact Role, etc in Web Service 1.0. I could create them in the following case:
1. Insert Contact object and get contactId (now new contact exists in CRMOD)
2. Insert Account object with Contact Role child associated with contactId
My questions are:
1. Do we have the following order? Insert new Account with new Contact child and Contact Role child (Contact is new and does not exist in CRMOD).
2. Looks like system need accountId, contactId, etc to make the objects relationship. Is there other field having the same function?
Thanks
Ray

Hi Ray,
In response to your questions:
1. Do we have the following order? Insert new Account with new Contact child and Contact Role child (Contact is new and does not exist in CRMOD).No. Both the Account and Contact must already exist. The Role value is an attribute on the Account Contact relationship, this relationship must exist in order to assign a role value to it. This is consistent with the behaviour of the UI, when you press the New button on the Contact child applet, you are taken to the Contact New page where you can create a Contact record. Once you save, the relationship is created but you cannot assign a role value unless you click the Edit Roles link next to the new Contact.
2. Looks like system need accountId, contactId, etc to make the objects relationship. Is there other field having the same function?Correct, the system needs to know which Account/Contact pair is being assigned a role value. To do this the Account and Contact values must be uniquely identified using the Id values for each.
I hope this helps.
Thanks,
Sean
Edited by: Sean Duffy on Jan 25, 2010 10:11 AM

A question about the execution order of java code

I have a question about the order of the execution of java code.
class myclass
String str1 = new String("str1");
static String str2 = new String("str2");
static
String str3 = new String("str3");
myclass( )
String str4 = new String("str4");
static myfuntion()
String str5 = new String("str5");
When I new a myclass object, what is the order of execution about str1,str2.str3 ,str4?
When I run myclass::myfunction( ) instead of new a myclass object what is the execution order about str1, str2, str3, str4, str5?
Thanks

hello,
I think there may be one thing can't use println to make sure.
class myclass
static { System.out.println("str1"); };
myclass() { System.out.println("str2"); }
then str1 appear before str2
class myclass
static { String str1 = new String("str1"); };
myclass() { String str2 = new String("str2"); }
then
str1 initilized before str2,
str1 get the value str1----->after<----- str2.
Am I right or wrong?

Question about the function module (RFC_READ_TABLE)

Dear everyone
Could I ask you a question about the function module (RFC_READ_TABLE)?
I was asked if it's possible to create a report which compares the data between different SAP systems (both production systems).
Now, the easiest way would be to use the function module (RFC_READ_TABLE) within a SAP infoset query (SQ01 type query).
But I heard the rumor that using the function module (RFC_READ_TABLE) is not advisable due to the security reason.
However, I am not exactly sure what sort of security problems this function module can possibly have...
Would you help me on this?
I also would like to know if using "remote enabled module" type function module can always overcome this possible security issue.
Or, are there any points that I need to be careful about even when I use "remote enabled module" function module?
Thank you very much in advance.
Takashi

Dear Fred-san
Thank you very much for your support on this.
But, may I double check about what you mentioned above?
So, what you were mentioning was that if some user executes the query with
the function module (RFC_READ_TABLE), under the following conditions, he can access to
the HR data even when he does not have the authorizations for HR transactions?
<Conditions>
1. the user has the authorization for HR database tables themselves
2. RFC_READ_TABLE is called to retrieve the data from HR database
<example>
Data: LF_HR_TABLE like DD02L-TABNAME value 'PA0000'.
CALL FUNCTION 'RFC_READ_TABLE'
   EXPORTING
    query_table                = LF_HR_TABLE
TABLES
   OPTIONS                    =
   fields                     =
   data                       =    .
But then, as long as we call this function module for a non-critical tables such as
VBAP (sales order) or EKKO (purchase order) within our query, it wouldn't seem to be
so security risk to use RFC_READ_TABLE...
Besides, each query (infoset query) has got the concept of user groups, which limits
the access to the queries within the user group.
※If someone does not belong to the user group, he cannot execute the queries within that
   user group, etc
So, my feeling is that even infoset queries does have authorization concept...
Would you give me your thought on this?
I also thank you for your information for SCU0.
That is an interesting transaction
Kind regards,
Takashi

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Question about the programming of a legend

Hello everybody,
I have a question about the programming of a waveform's legend. I
already asked here in this forum about the legend programming (03)
months ago.
I went satisfied but I ve just noticed that this code
(See Code old_legend_test.llb with main.vi as main function) operates a
little different from my expectances.
Therefore I have a new question and I want to know if it
is possible by labview programming to plot and show, on a waveform
chart, a signal with activ plot superior to zero (0) without to be
obliged to plot and show a signal with activ plot equal to zero (0) or
inferior to the desired activ plot.
I give you an example
of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
and each signal corresponds respectively to a channel (Chan1, Chan2,
Chan3, Chan4). I want to control the legend (activ plot, plot name and
plot color) programmatically. Is it possible with labview to plot signal
1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
without to active the signal with the corresponding activ plot zero
(0)?
Let see the labview attached data
(new_legend_test.llb with main.vi as main function). When I try to
control the input selected values again I get them back but I don't
understand why they have no effect on the legend of my waveform chart.
Could somebody explain me what I m doing wrong or show me how to get a
correct legend with desired plots? Thank by advance for your assistance.
N.B.
The
both attached data are saved with labview 2009.
Sincerly,PrinceJack
Attachments:
old_legend_test.llb ‏65 KB
new_legend_test.llb ‏65 KB

Hi
princejack,
Thanks for
posting on National Instruments forum.
The behavior
you have is completely normal. You can control the number of row displayed in
the legend and this rows are linked to the data you send to your graph. Thus,
if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
which data you want to display in your graph using the property node (Active
plot and visible). But for the legend as you send 3 plots there is an array of
the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
this array but you cannot control the order in this array! So, to be able to
change this array you have to only send data you need to you graph. I'm not
sure my explanations are clear so I have implemented a simple example doing
that.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/
Attachments:
GraphLegend.vi ‏85 KB

The question about the sharepoint server 2010 install

Hi Friends,
i have a question about the sharepoint server 2010 install.
my computer is used the windows server 2008 service pack 1. in order to install the sharepoint 2010 server, i need to choose to windows server 2008 service pack 2. my question is when i install the windows server 2008 service pack 2,whether the inside
of my computer information will be lost or change?
thank you in advance.
Qearl

Hi ,
No data will be lost either from your Windows program files or other drives as long as it is an upgrade.
After upgrade you will still be able to see your old program files under windows.ol folder in the C: Drive of the new OS.
The data will be lost only when you perform a clean install like complete formatting the HArd disk and installing from scratch.
As mentioned it always good to maintain a backup preferable important files in a skydrive as there is a good chance of external drives crashing.

I got an answer and I replied with a question about the answer, does no show in unanswered

I got an answer and I replied with a question about the answer, does no show in unanswered questions. I guess replying was not the way to get another anwer, How do I do that?
He said - Certain Firefox problems can be solved by performing a Clean reinstall. This means you remove Firefox program files and then reinstall Firefox.
I want to know - Will I still have my bookmarks, history, addons, plugins, etc.? I do not know what plugins and such that I had. What about my pinned tabs and my tabs that where open.
More information - When I try to start Firefox I keep getting the message that I need to restart my computer in order to complete a previous update attempt. I had Sweetpacks on my PC and I do not know where it came from, it took over my home page in Internet Explorer and Ithink caused the issue with Firefox.
Should I do the clean install or try starting Firefox now.

Could you please stay in the thread where you posted the question and reply there instead of opening a new thread?
Locking this thread, so please continue here:
*[[/questions/968194]]
See also:
*[[/questions/968222]]
You won't lose bookmarks and other data in the Firefox profile folder as long as you do not remove personal data in case you uninstall Firefox.
See also:
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/kb/Backing+up+your+information
You can open the Properties of the Firefox desktop shortcut via the right-click context menu and check the "Compatibility" tab.<br />
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.

Question about the rescheduling of a Sales Order and its Production Order

Similar Messages

Maybe you are looking for