Question about the setup page for WRT54G2

I haven't really tinkered much on my router since I had a friend installed mine a couple years back but I did remember him saying to check for updates on it's firmware once in a while. I did just that but I came at a rather confusing point in my update... namely I found that you can acceess the page by typing in 192.168.1.1 in thhe browser but before I found that I ran into this site first:
http://ui.linksys.com/files/BEFW11S4/v4/1.50.14/Administration.htm
I was somewhat confused as my settings werent being saved when I worked on the webpage mentioned above, so can anyone tell me if that site is part of the linksys setup page ?

that site is just a demonstration of what the Linksys router's administration page looks like. it's basically for instructional purposes only. anything you do on that page WILL NOT affect your router settings.
on the other hand, accessing http://192.168.1.1 will allow you to change your router's settings.

Similar Messages

Question about the Filter type for the trace provide "Microsoft-Windows-Kernel-File"

Hello all,
I have moved this question from the Windows
Server General Forum accorfing to the suggestion from Mr. Justin Gu
I have a question about the Filter function for the trace provider "Microsoft-Windows-Kernel-File".
I can find the Filter function with the following operation.
Mr. Justin Gu wrote:
> You create a Data Collector Set for the trace provider "Microsoft-Windows-Kernel-File" and finish completely, then you > can right click it and select Properties.
In the Properties dialog box, click Filter and
then select ‘Edit…’. You will be> able
to see the Filter type and Filter data in the Filter dialog box.
What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.

What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.
I'm looking for the same information.

Question about the Intel driver for the IDE controller

Greetings to all:
Lenovo has recently published another driver for the IDE controller and I wonder how many of you that have a T60, T60p, T61 and T61p have been able to actually install it.
My controller device is:
Intel(R) 82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller - 27C4,
both in XP-SP3 as in Vista SP1, 32bits versions ( see bellow details of my T60p, which has 2 hard drives)
Interestingly enough the driver on each is v:7.0.0.1020 (2005/05/23) for XP and v:6.0.6001.1800 (2006/06/21) for Vista-B. They are working well as far as I see, but now and several times before, I have tried to update them but they do not install. The message is that I have already the best driver. I noticed that the label of the controller is not quite exactly spell out in the instruction text file or the .inf, and the one that comes close, is that of the so call ICH7-M family.
Why is this? There are at least 7 versions discussed in the history. It it perhaps because the one for the ICH7-M family is always the same? System update does not install them either.
Forgive my curiosity but why bother publishing if they can not be installed? Or perhaps somebody has. This is not logical.
Cheers.
Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock
Solved!
Go to Solution.

For those who think I can not follow directions.
First, the driver for the Intel IDE device in a T60p is obviously from Intel. But there are two ways to get it fulfilled.
Lenovo publish the Intel drivers with perhaps there own twists, refinements and in the absence of clear contrary information, that they are perhaps more fine tuned to the machine. It uses the following inf files to have them install: iaahci.inf and iastor.inf. They are revised whenever Lenovo fell is necessary and eventually published.
I must assume they are in use if you have a Vista system originally installed by Lenovo and that is why those inf are the ones you find in the updates.
Mi T60p was purchased 2 years ago with XP-Pro, just before the release of Vista, with the understanding of a free upgrade to Vista-B shall be send when finally released. An Indeed they keep their word and send me a Lenovo branded full version of MS Vista-Business, some 4 months latter (not an image). Rather than upgrade XP-Pro and to avoid the time in limbo and work interruption of the Vista less desirable over XP, I did a successful clean install into a new hard drive, followed by a Lenovo system update, which changed many drivers and installed programs, etc. But as you might imagine, the Intel IDE-SATA driver installed is the one provided by MS (v:6.0.6001.1800 of 2006/06/21), (which uses a different installation file mshdc.inf) and, until proven otherwise, I must assume more generic, since it is for any and all machines, following the standard of the hard drive SATA type.
Talking to Lenovo support for nearly 1 1/2 hours last week, was at least not good for my blood pressure, while attempting to explain the issue and refuting a collections of nonsense from the support tech. Eventually a supervisor assure me that the driver was the same and that it has not change for a long time, as it is the same even for XP. Well, why bother with updates if that is the case? But I see that there are others IDE drivers species for animals such as Dell, or HP, etc. Thus you must accept that there is a strong case for a Lenovo modified Intel driver and thus the updates. Tech support could not answer such question, nor they were able to install version 8.6.0.1007 (date 2008/12/04) of the driver.
I fell the machine is working well, but have nothing to compare with (MS Experience Index 4.3). And as usually happened, sometimes you do not appreciate how sick you are, until you get cure. The question remains about the driver been generic and sufficient or specific and optimal.
Cheers and happy holidays.
Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock

A question about the Flash intro for the Zen Mic

Message Edited by davidz on 09-0-2005 09:42 PM

davidz wrote:Hello: This is going to sound incredibly stupid, but I want to know where the music on the flash for the Zen Micro is from. The music is very soothing and I tried looking in the source code for a media file.. but to no avail. If anybody could tell me, I'd appreciate it. Thanks a lot. - David.
I don't know but I bet this is what you are looking for: http://home.ripway.com/2005-4/282720/microflash.wav (on the flash its a 7second song that just repeats) well thats what you were looking for.~Derek

Question about the front page of Timers Reader?

Hi
It is impressive to see the Timers Reader, implemented by AIR and TLF,
As we open the Timers Reader, the first page into your eyes are a bunch of top news headlines. I am trying to figure out how to create this by TLF ? is each headline a paragraph element of TextFlow or a container of TextFlow , or just a TextFlow ?

I would guess that each one is its own a little TextFlow. If you are using the Flex 4 SDK, there are documented methods of how to create horizontal list-type component like that with item renderers that utilize TLF to render the text. You could also create a very simple component that uses TLF directly by using a TextFlow with either a container controller or a text line factory to render the headline text within the component.

Question about the new firmware for Zen Mi

Does the recent update for the Micro allow the user to use Zen Micro Media Explorer unlike the update from December?

You have to upgrade the Explorer version to the one that is enabled for "MTP" firmware, which can be downloaded for free from the creative download section. I'm using the beta firmware, and it works pretty well for me, and I like the autosync feature with WMP0.

Question about the S-bracket for 848P

I would like to connect 4 speakers and still have the Mic-In, and LineIn available in my computer. From reading the manual, it looks like I will need the optional S-bracket for my MSI 848P motherboard. Urghh, where do I get the MSI S-bracket?
My next question is: Can I connect the SOUT-R and SOUT-L pins to my front connections of my computer case? (it has connections for a mic and head phone). I tried it anyway, but could not get any sound to the head phone (played around with the speaker configuration without any success). Is there anything else I should do, or is it simply something I should not attempt?
Any help is appreciated.

Quote
Originally posted by vinamdt
I would like to connect 4 speakers and still have the Mic-In, and LineIn available in my computer. From reading the manual, it looks like I will need the optional S-bracket for my MSI 848P motherboard. Urghh, where do I get the MSI S-bracket?
My next question is: Can I connect the SOUT-R and SOUT-L pins to my front connections of my computer case? (it has connections for a mic and head phone). I tried it anyway, but could not get any sound to the head phone (played around with the speaker configuration without any success). Is there anything else I should do, or is it simply something I should not attempt?
Any help is appreciated.
The AC'97 Audio CODEC of MSI 848P is Realtek ALC655
Although it's AC'97 2.3 compatible and supports Front-Out, Surround-Out, MIC-In and LINE-In Jack Sensing
However, it doesn't support Universal Audio Jack (UAJ)
(While Realtek ALC658 supports!)
So I think the answer of your second question is: You can't.

Question about the Zagg InvisibleSHIELD for iPhone 4

Does it affect the clearness of the retina display screen on the iPhone 4? Also, does the maximum coverage cover the band that goes around the phone very well? Just trying to get a better feel for the Zqgg invisibleSHIELD.
Stephan

I just got the iPhone 4 and decided to compliment it with the InvisibleShield from Zagg, having the same shield on my iPod Touch and loved it. I went with the Max Coverage version which comes with front/back/sides coverage. I also picked up the Otterbox Defender case to go with it.
Since the Otterbox Defender fits the iPhone so snuggly, I was not able to keep the side shields on the iPhone, and even with the front and back shields in place it was tricky to make it fit properly into the case, but wasn't impossible, so I currently have the front/back shields on and the iPhone is in the Otterbox.
The problem: The protective shield on the Otterbox seems to stick to the InvisibleShield film and causes a pressed look. I am able to "unstick" the two shields by squeezing the sides of the Otterbox so that the Otterbox shield lifts away from InvisibleShield but this is hardly ideal, and a few touches later and I'm back to square one..I am tempted to just remove the InvisibleShield completely from the front...do I really need both shields anyway?? It would be nice to keep the InvisibleShield on though, for times where I may not have it in the Otterbox.
Has anyone experienced this issue and have a solution, aside from removing the InvisibleShield???

Question about the new firmware for Dr4-A?

I`ve just find out tha there is a new firmware for DR4-A: 2.60. Is it good?
Bacause i remember that 2.50 gave a lot of people trouble. What about this one?
Thanks a lot

2.60 is OK, I use it without any problems for several weeks and know that also others who were unhappy with 2.50 are using it and are now happy .

Question about the new battery for zen micro/ zen microph

i just reacently noticed that creative has a new bettery the?Li-Ion Battery (830mAh) for ZEN MICROPHOTO/ ZEN MICR0 on there website they say it gives longer battery lifeand i was wondering how true this could be because i would like to get more than 6 to 8 hours out of my zen micro

The Zen MicroPhoto uses more power than the Zen Micro would, so it has a better battery. But you can use this battery with the Zen Micro and it should last longer than your original battery.
Cat

Newbie with question about the $400 Deposit for FIOS TV Service

Okay, i was real happy when i found Fios is finally available in my area after years of waiting. I call to order and theysay i need to post a 400 dollar deposit for fios tv. I ask why and they say combination of poor credit and also the fact that the TV equipment as in the DVR boxes are very expensive and they just want security. Its fullt refundable after 1 year. However, to my suprise i was approved for FIOS Internet And Phone Service or Double freedom plan 20/5 internet and Freedom Phone plan both for $64 Dollars monthly 2 year guarantee. Also get the 100 dollars cash back in for of the debit card. My problem is that i dont need any verizon equipment for the Televisions as all my tvs in the home have tivo. All i need is the cablecard decoder which i am sure are considerably less expensive than the Home media dvr or regular dvr. Is there a way to get around this or am i stuck without fios tv until i put up the 400 dollars? Is there a higher power i can appeal to??

Thanks for the many previous replies..... I solved my problem by calling verizon and using my wifes maiden name. Now i will have all 3 fios services with no $400 dollar deposit.

About the voice recorder for E72

I have several questions about the voice recorders for E72
1. The default recorder in E72 can only recorder 60min each time. Sometime I want to recorder a lecture. It stoped automaticly at 1 hr. I am wondering whether I can change the record time longer.
2. Another thing about the default recorder is that it can not recorder in background (When it is recording, you can not do anything else, can not touch any keys). The problem is that if you touched some keys during recording, it will stop recording. This is annoying.
3. I heard that "Total Recall Call Recorder" can record in background. I tried the trial verson. I found that it seems not compatible with other audio apps, such as FM radio, music player, and vedio player. Is it right? When I start recording with Total Recall Call Recorder, I can not use FM radio, music player, and vedio player. This means that Total Recall can not record sound from FM radio. Right?
4. I tried the trial version of Ultimate Voice Recorder, and found it can record sound from FM radio. If you use Ultimate Voice Recorder to record a phone call, is there any beep?
Thank you very much!

Welcome to Apple Discussions!
Other companies should be coming out with products like this shortly. Some companies have said their product (a voice recorder) would be out in the beginning of april.
I don't remember the link though, so try searching google or the discussions for 5G iPod Voice Recorder
btabz

Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

Hi ,
You might want to refer the following link to find your serial number and activate your software .
Here is the link for the same.
https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Let us know how it goes .We'll do the best possible to get your issue fixed.
Regards
Sukrit Dhingra

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

3 questions about the evalution license ?

Hi - I have some questions about the Weblogic Server Eval license.
Before I start let me just say I'm not trying to rip BEA off, I just
want to know what's possible.
1. Firstly what happens after the 30 days does the server just not
work or only work in a restricted form ? If restricted, how so ?
2. I read that the eval edition will only access 3 unique IP
addresses. I intend to have WL running on a RedHat linux box whilst
the pages are served by IIS on a W2K box (both machines are on our
internal LAN). Am I going to be able to do this with the eval license
? I'm not quite sure what the 3 IP addresses refer to ...
3. Do I need anything super-strong in the way of a Linux box to run
this on ? I've got an old Pentium with 32Mb of RAM in it. I can't see
a "minimum spec" on the BEA site. Bear in mind it's not to do any
"real" work just to give the thing a run around the block ?
4. When the Eval license is dead what's the minimum amount a small s/w
house would pay for a licence to develop under (US (or anywhere)
prices will do I just want a ballpark).
Sorry that was 4 questions ;-). I'd appreciate any information you
have to share.
Thanks
Richard Shea.

1)The server won't start if the license expires.
2)The 3 unique IP'S refer to the number of clients that can access the
server. It means that WLS will server requests coming from 3 different
ip's at most. A request coming froma 4th client with a different ip will
be rejected.
3)I guess 32 MB's is relatively less The default scripts always use 64 MB
exclusively for the JVM . Having 32mb RAM means that a part of it will be
used by t he Operating System and other Applications. You might experience
OutOfmemory errors and slow performance
4)email [email protected] and they should be able to handle this
Yeshwant
Richard Shea wrote:
Hi - I have some questions about the Weblogic Server Eval license.
Before I start let me just say I'm not trying to rip BEA off, I just
want to know what's possible.
1. Firstly what happens after the 30 days does the server just not
work or only work in a restricted form ? If restricted, how so ?
2. I read that the eval edition will only access 3 unique IP
addresses. I intend to have WL running on a RedHat linux box whilst
the pages are served by IIS on a W2K box (both machines are on our
internal LAN). Am I going to be able to do this with the eval license
? I'm not quite sure what the 3 IP addresses refer to ...
3. Do I need anything super-strong in the way of a Linux box to run
this on ? I've got an old Pentium with 32Mb of RAM in it. I can't see
a "minimum spec" on the BEA site. Bear in mind it's not to do any
"real" work just to give the thing a run around the block ?
4. When the Eval license is dead what's the minimum amount a small s/w
house would pay for a licence to develop under (US (or anywhere)
prices will do I just want a ballpark).
Sorry that was 4 questions ;-). I'd appreciate any information you
have to share.
Thanks
Richard Shea.

Question about the setup page for WRT54G2

Similar Messages

Maybe you are looking for